Plot Multiple Series In 1 Graph/Chart
Aug 18, 2006how can i plot multiple series of values in one graph after checking some check boxes, which i have previously done, randomly?
View 4 Replies
ADVERTISEMENT
Macro: Plot Graph/Chart By Series Of Rows
Jun 30, 2008I've been trying to work out a code for a while now to plot some series in rows on a graph. The wonderful Mr Pope helped me with one before but for series in columns but i just don't seem to understand it enough to use it for this problem. the graph already has 2 series plotted (called the envelope) so i have to use seperate series to plot the data.
Basically the name of series is down column A
but the range is from E1 to Y1
and the data to be plotted on the graph which already has two series plotted in it is E2 to Y2, E3 to Y3 etc. iv been trying to use this code but failing miserably
Sub adddatatopsd(Name As Range, XData As Range, YData As Range)
With ActiveSheet.ChartObjects(1).Chart
With .SeriesCollection.NewSeries
.ChartType = xlColumnClustered
.XValues = XData
.Values = YData
.Name = Name
.ChartType = xlXYScatterSmooth
End With
End With
End Sub...........................
Scatter Plot Chart With Multiple Series From Selected Range
Jan 31, 2009What I want to achieve is a script that would create a new scatter plot of multiple series from a selected block of cell. I found a thread that was similar but what is different from my data is that my x values are different for each series.
The format of the data is in the following format, the first series will the first x,y pair, the 2nd series would be the second x,y pair. I don't know if it'll be an issue but one thing is that the date might be different lengths. For instance, the 3rd series, only has 4 data points, whereas the other series contains 6 data points?
x0.200.400.600.801.001.20
y5.002.501.671.251.000.83
x0.100.200.300.500.701.30
y5.002.501.671.000.710.38
x0.100.300.400.50
y6.672.221.671.33
So essentially, is there a way I can have the script say, select your range, and then graph the selected range as a scatter plot?
Multiple Series Chart/Graph
May 15, 2008I have a scatter graph that has over 100 curves that im need on one graph that at the moment i putting each x and y and name in by hand in series. I have been doing it for hours and have looked round the site to see if anything similar answer on ozgrid would help but im baffled
i was just wondering if there is an easier way of doing this
i havent really used macros but iv been reading up on it can i used it to do this?
I have added the table and graph and this is how i would like all the columns to look like
its the table called graph that makes the curves that i would like to be able to add in quickly
the rest im not too fussed about.
How To Plot 2 Chart Types On One Graph In VBA
Apr 14, 2014I would like to create a chart in vba which contains 2 sets of data, both using the same x axis. The first must be a line graph, the second a staggered bar chart. This must be represented on one chart with data labels. Also, how do I change the colour of the plots?
View 5 Replies View RelatedNot Plot Zero Values On Chart/Graph
Oct 20, 2006one of my excel reports, i am using a dsum formula and plotting a chart against it. i do not want to show the zeros on the graph, is there anyway i can do that, i could not find anything in the tools -> options.
View 2 Replies View RelatedFormat Chart Plot Series/Axis
Jan 16, 2007im having problem formatting my graph.
chart type = line.
I have 1 series of data, which is N values vs. Time.
Time however, is specified by specific dates. The graph is not putting a plot point accorrding to the date corresponding to the N value.
Example values:
date:____1/1/05 _______ 5/7/05 _____ 8/13/05
n value: __55 ___________ 22 _________ 11
I want the chart to reflect the time between the dates and put a plot point (n value) under each date listed and connect with a line.
Plot On Chart/Graph As Zigzag Pattern
Aug 1, 2008I have the following list of values which I want to plot as a zigzag. But when i create a line chart from them, the lines connect the zeros and the non-zero points - while I want the lines to connect only the non-zero points - so that there is a zigzag-like pattern shown.
the Data:
0
0
0
0
0
1.4343
0
0
0
0
0
0
0
0
1.4332................
Plot Each Selected Row Range As Series In Scatter Chart
May 16, 2008I need to plot multiple series in a scatterplot. The problem is that the number of series is user-defined. And also, the number of data poitns in each series is different. I've looked it up already, but a lot of the examples i've seen don't account for the fact that I need to run through a loop and add series into my graph.
In other words, i need a way to select a certain range each time it runs through the loop, and add the data as a series into the chart. Also, the user enters how many series there are, so I use that as a counter
Interval Distribution Plot Chart/Graph From Selected Row
May 9, 2008I have several worksheets with thousands rows (independent variables) and hundreds columns (all dependent variables). Each line basically gives me hundreds values for each independent variable - see below:
...
C9 39.65 653.95 5.28 163.56 99.56 14.49 ... ...
E9 7535.92 21500.56 2835.88 3122.98 7225.34 5371.25 ... ...
G9 111568 298021 12940 31645 181797 36996 ... ....
...
I need to know how the values in each row are distributed, and I ideally plot a 2D column graph of the distribution. Is there a way to do that and create/program a macro (with relative button on the workboook) that does it automatically once clicked?
Very often there are outlying values (bigger or smaller by a factor of 1000 or even more), mistakes, which I would like to identify and fix possibly.
Source Location/Address Of Series In Graph/Chart
Apr 23, 2008Looking for code that returns the cell address of a series in a pre-existing graph. I have a graph that already has Source Data manually assigned to it. Is there a way to find just the cell values or location of a single Series in a SeriesCollection object? I know that in order to assign a series of data to a Series object, you do something like this:
ActiveChart.SeriesCollection(1).Values = Worksheets("My Worksheet").Range("A1:F1")
The issue I am tackling with is a graph that already has preexisting data in the Series object, and I just need a quick and easy way to find the address of this data set.
Determine Half-Way Point Of Bar Series On Bar Chart/Graph
May 30, 2008i have created a xlColumnStacked chart using VBA in excel 2000. i would like to place a line in the center of one of the Points(). How can i locate a specific point, for example Points(1), so what i can then "draw" a line in the center
View 7 Replies View RelatedSelect Series (lines) In Line Graph By Adding Userform With Checkboxes On A Chart
Apr 15, 2014I want to add a user-form on a chart, which will have check-boxes that will allow me to select series(lines) that I want see and compare in a chart. Currently my line chart has 24 series (Lines) which makes the chart very difficult to view and looks very busy. How do I add list of check-boxes that will allow me to select one or multiple lines that I want to see at a time?
View 2 Replies View RelatedUpdating Multiple Series' On Chart
Nov 18, 2008I have a chart with 3 series':
Series1
Series2
Series3
The chart is called chtEngagement. I want to use vb to update these series'.
Series1 should be shown as:
Dynamic Chart Error For Multiple Series
Jan 17, 2014I have created a dynamic chart for multiple series. I have created this using the offset function and have named 20 ranges. The problem I have is that if only 19 of the 20 named ranges are populated it reads that the worksheet contains one or more invalid references.
Is there a way to stop this from happening?
Steps Graph - How To Plot
Jun 9, 2014How to plot a step graph?
I have attached a drawing by illustrating the graph that I wish to plot.
Attached Image : jpg Capture.JPG
How To Plot No Values In Bar Graph
Jun 3, 2014I have a pareto for a manufacturing facility that has a list of nonconformists and their occurrences in columns K and L. My issue is since it is a running total for the year at certain times the values are 0 for the number of occurrences. This calculates fine, but the graph is very large and the failures are all located on one side instead of being evenly distributed. I am trying to get it to only plot for what has occurred and not have a bunch of blank values. To make it a little more complex I'm trying to avoid macros.. I can get them to show up blank just can't get the bar graph to resize itself to fill the chart.
View 3 Replies View RelatedSeries Order In Legend, Multiple Chart Types
Aug 4, 2006I have a chart that combines 2 xy plots and a set of stacked columns ( total of 4 series).
I can adjust the series ordering between the 2 xy plots, and between the stacked columns, but not for all 4 at the same time.
I'd like the legend to show up as:
Series1, Series2, Series3, Series4
where 1 and 2 are the xy plots and 3 & 4 are the components of the stacked columns.
It is currently:
Series3, Series4, Series1, Series2
Any idea how to re-order the legend entries?
Add & Delete Multiple Chart Data Series Labels
Jan 16, 2008My friend has set up an excel workbook with a sheet for every month (labelled Jan graphs, Feb graphs, Mar graphs etc) which has 7 pie charts per sheet. The problem is the pie charts are showing the 0% fields and the data labels are overlapping. I have found a macro that gets rid of the 0% labels but I need to repeat the macro for all the 7 charts on each sheet and all 12 worksheets for each month of the year. I am very new to VBA and coding of any type and have looked but can't find the solution.
The macro I am currently using for "Chart1" on "Jan graphs" is below. The charts are labelled Chart1, Chart2, Chart3 etc.
Sub ClearLabels()
Worksheets("Jan graphs").ChartObjects("Chart 1").Chart.ApplyDataLabels _
Type:=xlShowLabelAndPercent
For Each x In Worksheets("Jan graphs").ChartObjects("Chart 1"). _
Chart.SeriesCollection(1).Points
How To Plot Comparison Of Only 3 Points Against 9 In Graph
Mar 27, 2014I'm stuck at a point in a graph that I am creating. Attached is as far as I have gone and now i'm having a gap on how to take the 2006, 2007 which is already in graph and add in how these years compare to guidelines visually in the same graph?
for instance ratings 1-9 are grouped in guidelines 1-4, 5-7 etc. How do i add in the 3 guides against each point? I have thought about adding a secondary axis but not how best to demonstrate the range of 1-4 to appear behind or above those points?
VBA Plot Two Ranges In Different Colors In Same Graph
Oct 4, 2013I have two ranges of cells containing names of chemicals, call the first one "Product" and the second one "Byproduct".
Also, there are two other ranges of cells, called "Productvalue" and "Byproductvalue". These cells contain the numerical values of products and byproducts. How can I plot both the products and byproducts in the same graph using xlBarClustered in different colors?
How To Plot Scatter Graph With Regression
Nov 20, 2013Given 100 samples, to calculate: numbers of hours spent on study is dependent on numbers of hours spent on social networking site.
x (social networking site)
y (study)
x^2
xy
6
4
36
16
24
[Code] .......
SUMMARY OUTPUT
SUMMARY OUTPUT
Regression Statistics
Regression Statistics
Multiple R
0.571423290877713
[Code] ....
So, I've got the coefficient of correlation equals to 0.57, how can I plot my scatter graph?
Plot A Graph From One Single Cell
Jul 26, 2007I need to know, can I plot a graph (ongoing plotting each value) from just ONE single cell which constantly updates it's value? (I have a third party datafeed hooked up to one single cell in Excel 2000 [yes, the old one ] and it updates quickly in realtime automatically throughout the day). But I need to trace the history of the values, plot a graph of all the values which ever show up in that single, in other words.
Also, I need to date and time stamp each new plot on the X axis of the graph (only when a new figure appears in the cell). So, for example, my one and only "datacell" (say, A1!) which is linked to an external datafeed is showing "145.87541" at 12:30:45 on 27/04/05. I need that time and date on the X axis which the number as the plot. Then that cell changes value 2 seconds later to "145.87587" at 12:30:47 on 27/04/05. Now I need that second plot on the graph at the correct time/date stamp so I am constantly plotting the history of the value onwards (potentially forever!) using just that one, automatically updating, cell.
Do Not Plot Zeros In Graph With Macros
Jun 5, 2008Im working on a graph that uses the code below to plot the series
Sub AddDataToMyChart( Name As Range, XData As Range, YData As Range)
With ActiveChart
With .SeriesCollection.NewSeries
.XValues = XData
.Values = YData
.Name = Name
End With
End With
End Sub
Sub Test()
Dim lngTopRow As Long
Dim lngBottomrow As Long
Dim lngCol As Long
lngTopRow = 3
lngBottomrow = 8
ActiveSheet.ChartObjects(1).Activate
With ActiveSheet
For lngCol = Range("D2").Column To Range("h2").Column Step 2
AddDataToMyChart .Cells(2, lngCol), .Range(.Cells(lngTopRow, lngCol), .Cells(lngBottomrow, lngCol)), _
.Range(.Cells(lngTopRow, lngCol + 1), .Cells(lngBottomrow, lngCol + 1))
Next
End With
End Sub
...
Create Line Graph That Will Incorporate Multiple Columns Of Data In One Series Of Data
Sep 27, 2011I am trying to create a line graph that will incorporate multiple columns of data in one series of data. The reason I do not place all of the data in one column is because it could exceed the maximum amount of rows allowed in excel. Also I need the data split up for viewing purposes.
I can easily just graph one column but how do I combine all the columns into one line graph with the data being in separate columns. Basically all the columns will be my Y values and X values are just 1:n.
Example Below:
Column AColumn B Column C159261037114812
Now in the example all of the values are x values.
Updating Data Formula For Cumulative Log Plot Graph
Oct 24, 2008I have attached 2 files. One of them is called Macca.xls. This is the file that was created for me by shg on an excelforum. The other isOreDep_updated.xls - this file is the updated list that I want to convert into the Macca file or make it look like the Macca file.
I awas trying to make a couple of plots, but they were not llooking like some examples I have.
In the OreDep-updated file attachment is my data I needed to use. I needed to make 2 plots:
Plot 1: Resource Grade (log scale) against the proportion of deposits (linear scale)
Plot 2:Tonnage (log scale) against proportion of deposits (linear scale)
This was done with my old data that is shown in the Macca.xls attachment.
They are meant to cumulative proportion plots. As a line or scattergram. An example of what they are meant to look like is at: http://www.nbmg.unr.edu/dox/ofr962/c11.pdf on Page 4 and 5.
shg managed to make them look like I wanted with the log normal smooth line too.
My problem now is that I want to change the data under Name, Resource Tonnes and Resource Grade (basically replace the old data in Macca.xls with the new OreDep_update.xls, to come up with same type of plots). But whenever I try to copy and paste the data into the Macca file it messes up everything. I looked at the formula that was created and I really havent a clue how to change it, without affecting everything else like the plots.
I also need to add 2 new columns for date and for reference, and it wont let me do that.
200 Series But Get (The Maximum Number Of Series Per Chart Is 255) Error Message
Aug 4, 2014I run a large simulation experiment. I have a loop plotting data in excel of a user defined area. Because of the limit of 255 series I have allowed a maximum of 250 simulations (they all need to be plotted). But the length of each simulation is free. I know there is a limit of 32.000 data points in a graph and I have this as a condition too.
If I set the data range to 100 columns and 3000 rows the graph is produced when I plot by columns. (code below)
But if I set the data range to 250 columns and 1000 rows I get the above mentioned error message. Even though I only have 250 series.
After the data is plotted it is the code below that gets the error:
[Code] .....
Line Chart - Remove Series Code But What If No Series Exists?
Dec 22, 2011I have the following code:
Sub Macro5()
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveChart.SeriesCollection(1).Delete
ActiveChart.SeriesCollection(2).Delete
End Sub
However, if there is no SereisCollection(1) actually present in the chart I get an error. How can I work around this? I will need an IF statement I assume, just not sure what it will look like.
Show Chart Data Series Labels On All Series. 2007
May 31, 2008I just recently installed Excel 2007 and I would like to know if it's possible to change all data points of a chart at the same time. In Excel 2003, I would normally hold down shift while clicking on each of the data points to make a global change. However, it appears I cannot do that in 2007.
I would like to display each data point's series name. When I go to Layout on the Excel Ribbon, and click on "Data Labels", and click on "More Data Label Options", the actual Y-axis values are shown for each data point. However, I do not want this - I actually only want the Series Name, but when I uncheck "Value" and check "Series Name" instead (under "Label Contains"), it only changes it for one of the series. Is there a better way, instead of going through each and every single series to make this change?
Spurious XY Scatter Chart Series Adding Series
Aug 21, 2006The following code is supposed to produce six series on an xlXYScatter chart. It produces seven with the seventh series being a repeat of the sixth but named series 7.
Sub Chart2()
Dim DataRange As Range
Dim CellString As String 'Stores a cell range in the form "AA27:AB39"
Dim CurrentSeries As Integer
Dim SeasonCount As Integer
Worksheets("Hemisphere").ChartObjects(2).Activate
CurrentSeries = 1 ............