Plot A Graph From One Single Cell
Jul 26, 2007
I need to know, can I plot a graph (ongoing plotting each value) from just ONE single cell which constantly updates it's value? (I have a third party datafeed hooked up to one single cell in Excel 2000 [yes, the old one ] and it updates quickly in realtime automatically throughout the day). But I need to trace the history of the values, plot a graph of all the values which ever show up in that single, in other words.
Also, I need to date and time stamp each new plot on the X axis of the graph (only when a new figure appears in the cell). So, for example, my one and only "datacell" (say, A1!) which is linked to an external datafeed is showing "145.87541" at 12:30:45 on 27/04/05. I need that time and date on the X axis which the number as the plot. Then that cell changes value 2 seconds later to "145.87587" at 12:30:47 on 27/04/05. Now I need that second plot on the graph at the correct time/date stamp so I am constantly plotting the history of the value onwards (potentially forever!) using just that one, automatically updating, cell.
View 9 Replies
ADVERTISEMENT
Jun 9, 2014
How to plot a step graph?
I have attached a drawing by illustrating the graph that I wish to plot.
Attached Image : jpg Capture.JPG
View 9 Replies
View Related
Jun 3, 2014
I have a pareto for a manufacturing facility that has a list of nonconformists and their occurrences in columns K and L. My issue is since it is a running total for the year at certain times the values are 0 for the number of occurrences. This calculates fine, but the graph is very large and the failures are all located on one side instead of being evenly distributed. I am trying to get it to only plot for what has occurred and not have a bunch of blank values. To make it a little more complex I'm trying to avoid macros.. I can get them to show up blank just can't get the bar graph to resize itself to fill the chart.
View 3 Replies
View Related
Mar 27, 2014
I'm stuck at a point in a graph that I am creating. Attached is as far as I have gone and now i'm having a gap on how to take the 2006, 2007 which is already in graph and add in how these years compare to guidelines visually in the same graph?
for instance ratings 1-9 are grouped in guidelines 1-4, 5-7 etc. How do i add in the 3 guides against each point? I have thought about adding a secondary axis but not how best to demonstrate the range of 1-4 to appear behind or above those points?
View 1 Replies
View Related
Apr 14, 2014
I would like to create a chart in vba which contains 2 sets of data, both using the same x axis. The first must be a line graph, the second a staggered bar chart. This must be represented on one chart with data labels. Also, how do I change the colour of the plots?
View 5 Replies
View Related
Oct 4, 2013
I have two ranges of cells containing names of chemicals, call the first one "Product" and the second one "Byproduct".
Also, there are two other ranges of cells, called "Productvalue" and "Byproductvalue". These cells contain the numerical values of products and byproducts. How can I plot both the products and byproducts in the same graph using xlBarClustered in different colors?
View 1 Replies
View Related
Nov 20, 2013
Given 100 samples, to calculate: numbers of hours spent on study is dependent on numbers of hours spent on social networking site.
x (social networking site)
y (study)
x^2
xy
6
4
36
16
24
[Code] .......
SUMMARY OUTPUT
SUMMARY OUTPUT
Regression Statistics
Regression Statistics
Multiple R
0.571423290877713
[Code] ....
So, I've got the coefficient of correlation equals to 0.57, how can I plot my scatter graph?
View 1 Replies
View Related
Oct 20, 2006
one of my excel reports, i am using a dsum formula and plotting a chart against it. i do not want to show the zeros on the graph, is there anyway i can do that, i could not find anything in the tools -> options.
View 2 Replies
View Related
Jun 5, 2008
Im working on a graph that uses the code below to plot the series
Sub AddDataToMyChart( Name As Range, XData As Range, YData As Range)
With ActiveChart
With .SeriesCollection.NewSeries
.XValues = XData
.Values = YData
.Name = Name
End With
End With
End Sub
Sub Test()
Dim lngTopRow As Long
Dim lngBottomrow As Long
Dim lngCol As Long
lngTopRow = 3
lngBottomrow = 8
ActiveSheet.ChartObjects(1).Activate
With ActiveSheet
For lngCol = Range("D2").Column To Range("h2").Column Step 2
AddDataToMyChart .Cells(2, lngCol), .Range(.Cells(lngTopRow, lngCol), .Cells(lngBottomrow, lngCol)), _
.Range(.Cells(lngTopRow, lngCol + 1), .Cells(lngBottomrow, lngCol + 1))
Next
End With
End Sub
...
View 4 Replies
View Related
Aug 18, 2006
how can i plot multiple series of values in one graph after checking some check boxes, which i have previously done, randomly?
View 4 Replies
View Related
Aug 1, 2008
I have the following list of values which I want to plot as a zigzag. But when i create a line chart from them, the lines connect the zeros and the non-zero points - while I want the lines to connect only the non-zero points - so that there is a zigzag-like pattern shown.
the Data:
0
0
0
0
0
1.4343
0
0
0
0
0
0
0
0
1.4332................
View 6 Replies
View Related
Oct 24, 2008
I have attached 2 files. One of them is called Macca.xls. This is the file that was created for me by shg on an excelforum. The other isOreDep_updated.xls - this file is the updated list that I want to convert into the Macca file or make it look like the Macca file.
I awas trying to make a couple of plots, but they were not llooking like some examples I have.
In the OreDep-updated file attachment is my data I needed to use. I needed to make 2 plots:
Plot 1: Resource Grade (log scale) against the proportion of deposits (linear scale)
Plot 2:Tonnage (log scale) against proportion of deposits (linear scale)
This was done with my old data that is shown in the Macca.xls attachment.
They are meant to cumulative proportion plots. As a line or scattergram. An example of what they are meant to look like is at: http://www.nbmg.unr.edu/dox/ofr962/c11.pdf on Page 4 and 5.
shg managed to make them look like I wanted with the log normal smooth line too.
My problem now is that I want to change the data under Name, Resource Tonnes and Resource Grade (basically replace the old data in Macca.xls with the new OreDep_update.xls, to come up with same type of plots). But whenever I try to copy and paste the data into the Macca file it messes up everything. I looked at the formula that was created and I really havent a clue how to change it, without affecting everything else like the plots.
I also need to add 2 new columns for date and for reference, and it wont let me do that.
View 9 Replies
View Related
May 9, 2008
I have several worksheets with thousands rows (independent variables) and hundreds columns (all dependent variables). Each line basically gives me hundreds values for each independent variable - see below:
...
C9 39.65 653.95 5.28 163.56 99.56 14.49 ... ...
E9 7535.92 21500.56 2835.88 3122.98 7225.34 5371.25 ... ...
G9 111568 298021 12940 31645 181797 36996 ... ....
...
I need to know how the values in each row are distributed, and I ideally plot a 2D column graph of the distribution. Is there a way to do that and create/program a macro (with relative button on the workboook) that does it automatically once clicked?
Very often there are outlying values (bigger or smaller by a factor of 1000 or even more), mistakes, which I would like to identify and fix possibly.
View 9 Replies
View Related
Jun 30, 2008
I've been trying to work out a code for a while now to plot some series in rows on a graph. The wonderful Mr Pope helped me with one before but for series in columns but i just don't seem to understand it enough to use it for this problem. the graph already has 2 series plotted (called the envelope) so i have to use seperate series to plot the data.
Basically the name of series is down column A
but the range is from E1 to Y1
and the data to be plotted on the graph which already has two series plotted in it is E2 to Y2, E3 to Y3 etc. iv been trying to use this code but failing miserably
Sub adddatatopsd(Name As Range, XData As Range, YData As Range)
With ActiveSheet.ChartObjects(1).Chart
With .SeriesCollection.NewSeries
.ChartType = xlColumnClustered
.XValues = XData
.Values = YData
.Name = Name
.ChartType = xlXYScatterSmooth
End With
End With
End Sub...........................
View 4 Replies
View Related
Dec 9, 2011
I am trying to plot multiple tables on the same line chart in Excel 2007. I have a list of X and Y values for Table 1, Table 2, Table 3 etc.
However the size of the tables are not the same for each table. For example, Table 1 might have 200 X and Y values, Table 2 might have 175 X and Y values, Table 3 might have 105 X and Y values, etc.
So when I plot these data tables on one line chart the individual plots are off center. They should all be centered at 0.
View 1 Replies
View Related
Apr 3, 2014
I want to make a single graph from two data sets that have individual dates.
help!.xlsx
E.g.
Data set 1
1. January 2010 2. january 2010 ... 10. december 2010 etc
10 15 ... 10 etc
Data set 2
1. January 2010 ... 1. January 2015 etc
200 ... 200 etc
View 8 Replies
View Related
Mar 9, 2014
I have an XY plot where the source X value data is a series of time values, each associated with a descriptive text cell. I would like to select a single point (obviously by mouse) and then execute a macro (right click preferred but a separate command button would be a suitable substitute for now) that will extract the X-value. I then plan to use that value to find within the source data the associated descriptive text cell and make a data label from that text. No clue where to start...the macro recorder is woefully deficient in this area.
View 2 Replies
View Related
Dec 10, 2012
I need to create a graph with a 2 x axis and a single y axis. For example:
Pressure ( PSIA) Solubility (mol %) Velocity (m/s)
200 0.024 1
300 0.036 1.2
400 0.041 1.8
I need the two x axis to be pressure and solubility and the y axis to be velocity, with the data being demonstrated by a single plot (I have only managed it with two plots which does not demonstrate solubility's relationship to pressure ).
For example at a pressure of 200 PSIA (lower x-axis) and solubility of 0.024 mol % (upper x-axis) velocity was found to be 1 m/s.
View 1 Replies
View Related
Aug 21, 2006
For Excel 2000:
In worksheet A, there is a column of numbers that can be 0 or not zero.
In worksheet B, there is a column of cells that determines if a corresponding cell in worksheet A is zero or not.
'As an example, for cell 'B!C6
=If( 'A!B52=0,"",'A!B52)
The column in worksheet B is used in a chart.
The chart settings are:
Tools | Options | Chart | Active Chart- Plot empty cells as: Not plotted
The chart is not treating "" as EMPTY, and therefore is not presenting correctly.
How would I set the value of cell 'B!C6 to EMPTY (or null, or blank, or whatever Excel calls it) using an IF statement, such that 'B!C6 would evaluate to EMPTY, and be ignored by the chart?
Would this be any different in Excel 2003?
View 9 Replies
View Related
Jan 7, 2009
If I have, in one cell (call it D1):
EH,DR,HU
and in a lookup table on another sheet:
A B
1 ED T
2 EH F
3 DR G
4 HU H
5 SE E
6 YU E
I need to be able to lookup the values in D1 on the table and return the values in column B to a single cell (say E1), also comma separated...
eg...
F,G,H
View 9 Replies
View Related
Mar 21, 2014
I would like to make a scatter graph that will graph the attached. The score would be on the Y axis and the birth date would be on the X axis. This is simple to do by itself but what I would like to do in addition to this is to have the top 25% of the scores a single color, the middle 50% of the scores a second color and then the bottom 25% of the scores to be a third color. And if it is possible to have the ID visible when you move your cursor over a given dot in the graph. Currently when I make a scatter graph the X,Y coordinates show when I hoover the cursor over a dot.
View 7 Replies
View Related
Mar 2, 2009
I'm using Excel 2003 and I'm trying to make my LINEST function and the source cells for a scatter graph use the cell range specified in another cell in the document. I figured out that it was simple to do the following:
I250 contains: 10, shows: 10
I251 contains: ="I"&I250, shows I10
But I can't figure out how to do this in a larger function. I've tried a few things but none of them work. Here is an example where I want it to do a LINEST with y values in cells Ja - Jb and x values in cells Ia - Ib (where a and b are integers specified in cells I250 and J250 respectively):
View 9 Replies
View Related
Jun 11, 2006
How can i make a graph that will graph against time? lets say i have a bank balance like this:
1/2/2000 $500
1/3/2000 $600
3/12/2000 $400
there may be more than one entry on any one given day, or there may not be an entry for 2 weeks. How can i graph the running balance in a way that it will show the timeline just as a calendar year(or however long i selected) and the points are plotting according to their date, not just equally spaced out.
View 2 Replies
View Related
Dec 18, 2006
I was tracking down simple ways to generate ASCII character based bar charts and came across this stunningIncellBarChartExample where the author suggested this can be done using VBA code.
I am very new to Excel and EXCEL VBA. Can someone help me sketch how the coding for the above example (include mixed colors) might be done? Is there a special font that need to be used?
View 3 Replies
View Related
Feb 21, 2007
Attached is a table detailing top 20 Incidents and Requests. Requests are highlighted in Yellow and Incidents are in Green. Associated with this table is a graph. What I like to do is if the bar on the graph represents a Request I want the colour to be yellow and if the bar represents an Incident I want it to be green. At the moment I can only choice one colour or a different colour for each bar.
View 4 Replies
View Related
May 14, 2014
I am making a spreadsheet that will be used to track employee time usage. I would like to be able to create a graph of the time throughout the day that shows only whether or not the employee has entered an activity during each particular time slot.
EX: The graph shows the time from 8-10am in 30 minute increments. The employee has entered activities for the time slots from 8-9 and 9:30-10. When the graph is created, I would like to see times 8-9 and 9:30-10 filled (or, charted, or, however I should phrase it) and time 9-9:30 left blank (to represent that no work was done).
View 3 Replies
View Related
Mar 21, 2008
I have a text file containing internet explorer browser history. The file has data in the following format (in Excel all data is in 1 column): ...
View 9 Replies
View Related
Jul 23, 2014
I am creating a series of charts that all include a text box containing "(N=[value])", with different values in each instance, but with each N value listed as a total frequency in each table. I am creating hundreds of these, so if there is a way to automatically pull the correct N value from a cell into the text box, it would make this faster. I have written simple functions in excel tables but have no experience with VBA/macros.
View 5 Replies
View Related
Jun 26, 2009
I would like to build a Macro to delete units (ex: 10V --->10) of two cell ranges that are not beside each other and eventually automate it to graph these two ranges because I will be running samples and have to produce a graphs for each sample.
I tried the code below, but I can't figure out how to include 2 ranges without deleting letters in other cells in in between the ranges.
for ex: I want to delete the non numerical characters in the two ranges C3:C1000 and H3:H1000 and graph these ranges.
View 5 Replies
View Related
Dec 30, 2008
I want to use a line graph to display an amount over time - that's the easy part. On the other hand, I would like to have to group the lines based on a value.
A short example:
Imagine you own 3 different stores and you're selling oranges. So your table looks like this:
http://img179.imageshack.us/my.php?image=orangeshm4.jpg
Now I'd like to have one graph (3 different graphs won't work as the rows increase -I need to select the whole column as data source):
Date on the x axis,
Oranges sold on the y axis,
and one line per store (e.g. a green one for store A, a red one for B and a blue one of C, doesn't matter).
View 2 Replies
View Related