I want to be able to change the size of markers on a chart as the user zooms in and out. I know that I can trap the mouse buttons and check for the zoom that way, but is there an 'OnZoom' event that I can trap in case the user uses the toolbar or menu to zoom?
View 6 RepliesIs there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
View 9 Replies View RelatedI have the following code, which works perfectly:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim TotalDays As Integer
TotalDays = Range("C65536").End(xlUp).Row + 1
The code points to the next blank cell so the user can input a value. Each time the user enters a value I want to re-run the code so that the colour of the cell changes.
However I also want to perform various calculations on the sheet. However this means the sheet is being changed and so continually repeats my code.
How do I add the following, to my previous code?
Range("E8").Value = Cells(7, 6) * 2.5
Looking for the syntax that will allow me to code an event sub routine, based off the event of a specific function e.g. findnum being run.
View 14 Replies View RelatedWhat would be the name of the event where if I select a particular cell in Sheet1 it triggers something in say Sheet2?
View 9 Replies View RelatedWorking in Excel 2003. I have a VBA code that, if a particular option is chosen from a drop down box, then a message box appears. What I'd like to do is alter this code so that if cell J5 has "Text 1", "Text 2", or "Text 3" then the message box does not appear. Here's my
View 3 Replies View RelatedI've created a macro with a custom dialog box, but I don't know how to make the transition from when I make the dialog box pop up, the user enters the information, then they click "Continue" or "Cancel" or whatever it may be, how to do I make it happen from there out?
Do I make the command buttons a boolean and if they click it's true? How do I make it work?
I have a user input box (VBA) with two columns of data entry. The leftmost column has text boxes labeled color1, color2, color3, etc.. The rightmost column has text boxes labeled tag1, tag2, tag3, etc..
I have the TAB sequence set to go from color1 to tag1, color2 to tag2, color3to tag3, etc..
A user can inadvertently tab over the color1 (or color2, etc. columns) into the tag1 (or tag 2, etc. columns) column without entering data in the color column.
Is there coding to allow a TAB key entry to be a Change Event such that, if a user TABS out of color1 without entering data, a MsgBox could signal that they must enter data in the color1 field before they can continue?
Alternately, can you suggest a different approach? The goal is to require an entry in the leftmost column (color1) before they can proceed to the tag1 field. Of course, they are given a "Cancel" option.
I have a hyperlink within Sheet1 (Functionalities) of my workbook that looks like this: ...
View 13 Replies View RelatedI have a worksheet used for scheduling. When a members time is updated, it updates the counting cell for that time by subtracting 1 (thats simplified, the forumla is more complex than that).
I have five teams and five workbooks for each team to do it's own scheduling. In just ONE workbook, the Worksheet_Change() event has stopped executing. It's fine in the others. I renamed the workbook to archive it then put another workbook in it's place and now that one works just fine.
The workbook that I've archived, I hate doing that not knowing what would cause the Worksheet_Change() to stop being recognized. There is no code on the sheet or related to the sheet that would stop it or cause events to be cancelled.
I wanted to know if there is some secret keystroke combination that may have been inadvertently clicked that would cause events to firing or stop being recognized?
I have a table on excel that I would like to have an event calculated by the hour and would like to know how to, ex:
1900
2000
2100
2300
00-0100
0
1
0
2
0
that above is where I want the formula to calculate the following:
Activiy 1
2015
Activity 2
2310
Activity 3
2348
Also I would like to do something similar like that but for age, ex:
18-24
3
25-40
1
41-59
0
[code].....
I need to have a check box, that when it is checked the user must fill in a cell.
View 9 Replies View RelatedI have two workbooks that have the following
Private Sub Worksheet_Change(ByVal Target As Range)
Dim myColor As Integer
With Target
If Intersect(.Cells, Range("v:v")) Is Nothing Then Exit Sub
If IsEmpty(.Cells) Then r.Offset(, 1).Interior.ColorIndex = xlNone: Exit Sub
If Not IsDate(.Cells) Then r.Offset(, 1).Interior.ColorIndex = xlNone: Exit Sub
Select Case Month(.Value)
Case 1: myColor = 3
Case 2: myColor = 17
Case 3: myColor = 19
Case 4: myColor = 22
Case 5: myColor = 26
Case 6: myColor = 33
Case 7: myColor = 36
Case 8: myColor = 38
Case 9: myColor = 40
Case 10: myColor = 42
Case 11: myColor = 44
Case 12: myColor = 7
I have this code in 1 sheet in one of the books (and all other sheets work fine), and the same code in all sheets in the other book. Both books work the way it's supposed to.
My question,
Is it necessary to have the Worksheet_Change event in all the sheets (all sheets act on the code the same way) or is it okay for just one sheet?
Could I encounter a problem if in only one sheet?
I just don't see why I would have to add more size with the code in all sheets if it is not necessary.
I found this code on one of my many searches, that works great.
(can't remember where I got it or who wrote it, (My deepest apoligies to the author))
Public pRule
Sub butRulerToggle_Click()
pRule = Not pRule
Selection.Select
End Sub
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If pRule Then
For Each aCell In ActiveSheet.UsedRange
If aCell.Interior.ColorIndex = 27 Then aCell.Interior.ColorIndex = xlNone
Next
On Error Resume Next
For Each aCell In Application.Intersect(ActiveCell.EntireRow.Cells, ActiveSheet.UsedRange)
If aCell.Interior.ColorIndex = xlNone Then aCell.Interior.ColorIndex = 27
Next
End If
End Sub
My question:
This works in a sheet module. How can I put it in the This Workbook module so it works on all sheets.
By the way, what this does is highlight the whole row on a clik of a cell, leaving any color formating that was initially there alone.
Very useful if you are looking at say A10 and then want to look at Z10 without losing focus on the row.
There is a Workbook_Open event in VBA. Is there a Worksheet_Open event? I.e. I want to write some code that is applied when a worksheet becomes active/is displayed to the user.
E.g. I am in Sheet1. I click a button which links me to Sheet2, however in doing that I want the value of the Active Cell in Sheet1 to be displayed in A1 of Sheet2.
Is this possible? Is there another way to do this.
I would like to create some VBA code that changes the color of the cells I have selected, as soon as I let go of my mouse click. Additionally, is there a way to identify where the range begins and ends so I can test to make sure the range is inside a certain area?
View 9 Replies View RelatedI want to execute as the user saves the workbook. I want to unhide the rows that may have been hidden during use, on the save. I would prefer it to just happen with no interaction with the user. They save the the book and without them even knowing the rows are unhidden and the file saves. The code it self works as I want it to, I added to a command button with no problems as soon as I add it to the before save in the Thisworkbook it will not even work even if I just try to step in.
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
Application.ScreenUpdating = False
Application.EnableEvents = False
Application.Calculation = xlCalculationManual
Worksheets("Prelims").Range("A11:A511").EntireRow.Hidden = False
Worksheets("Elecs").Range("A11:A1261").EntireRow.Hidden = False
Worksheets("Civils").Range("A11:A5011").EntireRow.Hidden = False
Application.EnableEvents = True
Application.ScreenUpdating = True
Application.Calculation = xlCalculationAutomatic
Worksheets("Civils").Select
End Sub
I have a macro that needs to run whenever a result from a calculation on my worksheet changes. I'm currently using Worksheet_Change to accomplish this, which works fine.
The only problem is that I would like the macro to wait until all calculations are finished (there's a bunch...) before running the macro. It would seem that the AfterCalculate event would help, but I can't seem to get the code to work correctly (or even at all). I'm pretty new at this... If anyone can give me a clue, I would greatly appreciate it! My searches on the message board and the web have come up pretty empty.
I'm running Excel 2007. Not sure if any other details are needed.
I have a MS Access db in which I have two delete queries called 'qrySessionsCompleted1' and 'qrySessionsCompleted2'. What VBA code can I use in the BeforeClose event to run these?
View 9 Replies View RelatedI would like to run a some code that is only activated if another worksheet in the same workbook is selected and I'm not sure how to achieve it.
View 9 Replies View RelatedI have a worksheet that I use to track course scheduling. I have 5 columns which contain dates. At the end I have a Event Status cell that i manually update based on which of my 6 date fields are filled in. I would like to have the Event Status automatically fill with a word as I add dates to the 5 columns. If there is a date in columns 1,2,3, and 4 the event status cell would update based on the date in column 4, dates in columns 1 and 2 - the event status would update based on column 2, etc.
Here are my column headers and what the event status says if there is a date in that column, and no dates in any column to the right of it.
Notional Start Date - Not Contacted
Declined Date - Declined
Contacted Date - Contacted/Working
Scheduled Date - Scheduled
Completion Date - Completed
So I have a sheet that has a calendar control on it. I'm trying to make it so that when I open excel it automatically sets the calendar to todays date. I'm using the code:
VB:
Private Sub Worksheet_Open()
Calendar2.Value = Date
End Sub
If I click the play button the calendar changes to today's date. However, when I open excel it doesn't work. I saw screenshots online where the dropdown box to the right (in VBA) that lists the events had 'open' listed there. Mine does not. It appears as if the 'open' event is missing from the 'library'.
I have a calendar created as an excel workbook that currently has no functionality other than writing notes for specific dates. How can I get excel to show a message/popup/notification when the calender is opened up each time for what has been input as a note for the date today? The calendar has a year to view on one worksheet and then a month to view on subsequent tabs. please note i am a relative novice with excel.
View 14 Replies View RelatedI have been googling for a excel sheet, but just seem to find the right one. Then I found this great looking forum so I know someone here must beable to help me.
This is what I need:
I host an event twice a month I have cost that change every two weeks and would like a nice looking sheet that I can puch the numbers in to then it will tell me how much I need to charge each guest. I have cost that are always the same and other that are not. If this isnt clear here is an example...
Week1 week2 Month Year
Milk 2.50 2.50 5.00 130.00
Eggs .75 .75 1.50 39.00
Vodka 2.50 2.50 5.00 130.00
Lawn Darts 10.25 10.25 20.50 530.00
Host 75.00 75.00 150.00 3900.00
room 125.00 125.00 250.00 6500.00
total 216 216 432 11232.00
Number of guest week1 week 2 month year
25 30 55 55
cost of each guest 8.64 7.20
I am trying to write some questions on cells of Sheet1 of a workbook. Then I want to write the answers on cells of Sheet2 of the same workbook. I want the user to be able to double click the question-cell on Sheet1 and be taken to the respective answer on Sheet2.
View 6 Replies View RelatedI am a high school science teacher trying to figure out how to automate part of a competitive spreadsheet.
Our problem: We have a tournament with nine events and 20-ish schools. We input individual student results into event specific sheets, this gives us the information for the team results. We need this information to be copied to the team result so that we can see each result. Such as (4+3+5) instead of adding them together (12).
I made a huge formula using Concatenate and nested IF statements once that sorta worked, but won't anymore due to some changes in scoring.
We use macs and I would prefer the answer be a formula rather than a macro, but if it is not really possible, a mac specific solution would be needed.
See the example sheet for our setup and more information.
I am trying to run the below code whenever the result of cells (22,x) changes. Cells (22,x) contains a formula.
[Code] .....
I have a chart with 2 Y axis. I am attempting to write some code that will update both axis with the same max & min value that is triggered by the combobox selection. The code will update the axis but is not triggered by the combobox selection.
[Code] ...........
Is there a way to call a sheet selection change event when the workbook opens? I am currently using this work-around to call the event:
View 13 Replies View RelatedWhat is the method to trigger an event on a command button (placed on a worksheet - not in a form) when the return key is pressed? I.e. instead of moving to the next cell clicks the button?
View 9 Replies View Related