Find Specific Data In A Cell And Move It To Another Cell
Dec 12, 2012
I want to extract the following details into another collumn (bold ) from data in column B1 into C1. The information i want begins with 3 digits with a '/' then other digits follow.
M / AS308 - :308/65588 POUN
S33 / 33 - :133/01504 TR
NI101 - :101/915635 T
N101 - :101/915635
I have a command button that will run paste a value in a specified cell but I also need it to check for the next open cell and paste the data if the previous cell in a specifid rage is already filled with data. Here is my code I have below. *jumps with Joy* My Range is E6 to E10
VB: Private Sub CommandButton1_Click() Dim f As Double Dim t As Double
the above information have following header ie. Location, P.O.Box, Address, Tel, Fax and Category.
every time one of the header inforamtion is missing ie. Address or P.O.Box, Or Fax, due to this problem every time cell address of information aganist header is change. supose in first copy/paste Tel inforamtion is in A15, but second time it may be on A13, and 3rd time it may be on A17 and so on.
I want to make a macro which search header ("Location", "P.O.Box", "Address", "Tel", "Fax", "Category" ) from a Range A1:A30. than down two steps to copy header information (75325412) and paste in fixed cell location C1:C5 (C1=Name, C2=Location, C3: P.O.Box, C4=Address, C5=Tel, C6=Fax, C7=Category) in same sheet. and repeat the steps to copy information aganist header from all header in Range A1:A30.
I work with a sheet with active columns B thru I, which get daily numeric entries. The problem is that I have to enter data in columns H & I first, then go back to B thru G. how to force the cursor to jump to column B when I tab out of I into J?
If the above is in different cells, I want to be able to move the data in "G" to the cell beside "E" (up a row and over 4 columns) IF the cell to the left of "G" equals what I specify is in "F" (for example use "product"). I would want to apply this to an entire sheet, not just once. If the macro (not sure what its called) could also then delete the row that contained "G" after it moves it, that would be even better! The output in the example above would be:
I have a database that contains many products. All of them has a number.
I have an cell and a button for search. I am entering on the search cell the 254 number , and when i click the search button , i want a macro that can select me the cell that contains the 245 number from A column.
Till now i had tried with the following procedure.
I had made another cell which contains the following function
=MATCH(G6,A1:A100,0) , where G6 = my search cell for the number. This return my cell number from A column , but i don't know how to select that cell from the vba
I had tried with the ActiveSheet.Range , but i had to input the cell which i want to select , or it's there a way to enter the collumn where to find and the cell number to get from my MATCH function ?
I'm trying to find vehicle make and model in a cell containing a lot of text and then display that in the formula cell. For example if A1 is a paragraph that contains somewhere within it "Ford" & "Ranger". I want B1 to display "Ford" and C1 to display "Ranger". I have a list of vehicles makes (column A) and models (column B) on a seperate sheet.
I am trying to check some data (about 5000 rows worth) and don't want to have to go through each row. What I need to do is check whether the 7th number in a string is below 5, and then to return a text result for above 5 and a different result for below 5. For example:
B4: 88050170088 7th value = 7, therefore return "Male"
I have tried =IF(MID(B4,7,1)>5,"Female","Male") but it is not working and I can't figure out why..could also just be making a rookie mistake....
I have absolutely no idea how to get starting on this one. I've got a long string in cell B1. At some point there is the word "oms:SomeString," (without the quotes). I need to know whether SomeString is somewhere in the active sheet or not (the workbook running the VBA-code is not the active sheet). I can't just compare the cell B1 because it contains multiple words. Any hints are very welcome.
I need a vba code that will find all the columns (j) which there cell(1,j) includes the word "Date". the word "date" will be a part of a title, for exmple: "due date", "starting date"
Cells A1:A5 all have a vlookup formula that will pull one of the following into it:
1. The word "NONE" 2. #N/A error since it doesn't exist in the table 3. A text value that has the format 13.55.46.91
I want a formula that will look at these 5 cells and give me #3. That #3 value can only appear once in the 5 cells in any of those 5. The other 4 cells will contain either 1 or 2.
3 always has length equal to 11. It always has periods in those places. The digits do change.
I have at database which i want to search in... The problem is that i wanted to search in specific cells, or ranges. So i made a for loop searching for words in one range.. But it doesn't work.
For i = 0 To antal - 1 Step 1 Worksheets("Søg").Select If Range("B5") = "X" Then Sheets("Database").Select c = InStr(1, Range("B" & 2 + anRow * i), sgbygsag, 1) Sheets("Søg").Select Range("A1") = c End If Next
anRow is the delimiter between to databases. And sgbygsag is the string i am searching for, i have made sure that this really is a string. No matter what I do this code sets Range("A1") to "0".
I have a spreadsheet that I'm using as a call log for a support desk. Sometimes, when the problem is outside of my scope, I have to call in a ticket to a helpdesk.
I want to keep the call log separate from the ticket list, but I want to be able to reference a ticket number for a specific call or vice versa using a command button.
I am currently using this formula - =SUMPRODUCT(--(MONTH(Leads!B3:B999)=1),--(YEAR(Leads!B3:B999)=2013),--((Leads!J3:J999)="Contract"))
This gives me the count of rows that have Jan as the month, 2013 as the year and Contract word in column J. Now I want to add another column to be checked. That column has values in format - Design: X, Design: Y, Design: Z etc.
So I want to have the condition above and the cells that have the word Design.
I'm trying to copy data from one excel sheet to another excel sheet. However, the data to be copied is dependent on the 'client name'.
To explain this further, in the first list I have a detailed report on our clients and the services provided to every employee of that company/client.
However, the sheet two only needs the names of the employees that belong to a specific client.
This can be done manually by setting a fliter on the name of the client/company, but I need to be automated. To ensure only that specific company/client company's employee name is copied.
I'm having some difficulties in defining my formula. I'm pretty sure that this should be possible. I have a table containing values and dates. For each change in dates, I should summarize every value for that date. I cannot use the autosummarize function, because I do not want the sum to be beneath the values, rather in a column to the right of the values.
I have created a formula which checks for a change in date: =IF(C15=C16;0;1) where the C column contains the dates. Basically I say that the Index column should contain a 0 if the date is the same as previously registered, 1 if it is a new date.
The index column is used in some conditional formatting rules, so I would like to keep it anyway.
Could you tell me how I can find a specific sentence within a cell that contains many sentences.
for example
I want to find, "I am new." within a text that contains, "Hello I am Bob. I am new. I live in england."
I am currently using =+FIND(AB$1,$V2) where AB1 contains the sentence I am looking for and V2 contains the cell full of sentences. However this returns #VALUE! when the sentence is not found. I want it to return null.
I'm faced with receiving data for time, in a text format, as follows:
Example of possible cell contents...
20secs 40m20secs 2h40m20secs
I'm not interested in the secs value but need to isolate the h (hours) and m (mins) values to use in another formula as numbers. The time could be shown in either of the above formats with either; (a) just secs, (b) mins & secs or (c) hrs, mins & secs... and of course the hours or mins values could be 1 or 2 digits in length. How can I determine (using formula only, not vba) what the values for hours and/or mins are dependent upon what is present?
I have a excel file with two worksheets. I need to find a specific row in column g, cut the entire row, and paste it into sheet2. I have started off by using this code, that I got off of some site. It works wonderfully in finding the specific cell, but just copys and moves the specific cell into sheet2. Whereas I need it to cut and paste the entire row where it finds the cell that begins with a 3 in column G.
Sub Copy_To_Another_Sheet_1() Dim FirstAddress As String Dim myArr As Variant Dim Rng As Range Dim Rcount As Long Dim i As Long
I have a large spreadsheet with about 18000 rows or data and about 60 columns. I need to a macro to find a specific word in a column like "charge" and anytime that word is found in the column to insert a blank cell in front of it.
Currently the sheet looks like this:Fee AChargeFeeChargeFee AChargeFeeChargeFee AChargeFee AChargeNeed to get it to look like this: (so I can sort and subtotal)Fee AChargeFee AChargeFee AChargeFee ACharge
Currently i hav list of info that is long like this.
A 1 B 2 C 3 D 4 E 5 F 6 G 7 H 8 I 9 J 10
How to move row to column example below. Because i want the data to be printed on an a4 paper which can fit around 3 row to save space . If i manually copy paste page by page it is too much.
A 1 D 4 G 7 B 2 E 5 H 8 C 3 F 6 I 9
===
Currently i have macro code which roughly does this.
A 1 B2 C3 D4 E5 F6 G7 H8 I9 J10
Sub test() Dim rng As Range, m As Integer, c As Range Columns("c:E").Delete m = 2 Set rng = Range(Range("a1"), Range("a1").End(xlDown)) Set c = Range("a1") Do While c <> "" 'MsgBox c.Address
Range(c, c.Offset(m - 1, 0)).Copy Cells(Rows.Count, "c").End(xlUp).Offset(1, 0).PasteSpecial Transpose:=True Set c = c.Offset(m, 0) Loop End Sub
What I want to know: Is is possible to have information from one spreadsheet move specific data to another spreadsheet in the same workbook?
for example: I have hundreds of listings of tool measurements.
Date Tool type Measurements
What I want to do is have all the different types of tools and the information from the above line seperated into other spreadsheets. I do not want to sort this information and manually move it I want a formula that will move each applicable tool into that sub sheet. I have tried to use if statements but find that it creates subsheets with the correct tool types but has the spaces in between the parts. how do I eliminate the spaces?
I would like to move the current row of data to another sheet when I change a value in the row from an x to an s. I think I could use an If statement, but if you can move data from one worksheet to another, I don't know the syntax to use.
I have an issue with groups of data in a row, that I need to copy into a new row beneath the original. I need a formula or VBA that will perform this function:
If any data is present in columns AG-AK, then copy that data into a new row below, into cells AB-AF. Also copy column B (this data is always present, it is the name of the project data contained in the original row)
If any data is present in columns AL-AP, then copy that data into another new row below, into cells AB-AF. Also copy column B (this data is always present, it is the name of the project data contained in the original row)
When I use the mouse pointer to select a cell I can't use the arrow keys to move to another cell while the pointer is over the cell and I can't edit the cell while the pointer is over the cell. If I move the pointer away from the cell then I can move around and edit as normal therefore I don't think this is a scroll lock issue.
This issue also happens when I select a tab. If I select a tab and then leave the pointer over the tab I selected then I can't use the arrow keys to move around the worksheet or edit a cell; if I move the pointer away from the cell then I can move around and edit as normal.