IF Statement: Compare The Third Octet Of Two Ip Addresses
Jun 24, 2009
I need to compare the third octet of two ip addresses to make sure they are identical. In case you're not familiar with what i mean:
ex 192.168.1.2
192.168.1.3
I need to make sure that the red part is the same. So, I need a function that will only look at this part of the ip address and then tell me true or false if they are the same or not. Each ip address is its own cell so I am only comparing two different cells.
View 10 Replies
ADVERTISEMENT
Jun 17, 2008
I have 2 columns to compare which has almost same data but in different formats or sources. I need to update a 3rd columns as 'Yes or No' by checking the checking the data in both the columns. For ex. - Column A has data as - "BIENZ, STEPHEN R"
and Column B has data as - "SALTZER MED GRP/BIENZ". Now as 'BIENZ' is same in both columns so 3rd column should get updated as 'Yes'. There are 3000 rows which needs to be compared in this way.
View 5 Replies
View Related
Apr 25, 2013
I have a cell (B10) that has an IP address in it. I want cell B11 to automatically reflect the same first 3 octets of B10, but the last octet accumulated by +1.
Example: 172.23.0.128 would be in B10. I would like to have a formula in B11 to increment B10 by +1 to show 172.23.0.129.
View 7 Replies
View Related
Jun 11, 2007
how can i compare a range, which may contain multiple cells of the same information ie 1s and 0s with a separate cell, if they match, return a message box?
View 9 Replies
View Related
Feb 27, 2012
Desired output is to compare a value in one table to a value in another table based on the same values in associated columns in each table and produce a "True" or "False".
In each worksheet, the information should be similar but I want to compare them.
Worksheet#1 = "ABCD"; Column A = Lot#; Column F = "Defect T"
Worksheet#2 = "EFGH"; Column B = Lot#; Column R = "Defect T"; Column I = "Inspection level"
I want to find the lot # from cell A2 in worksheet "ABCD" in column B of worksheet "EFGH" AND column I in "EFGH" = "1st Inspection". At the same time, I want to compare the cell in F2 in worksheet "ABCD" to the value in column R that correlates to the same row where the lot#s match.
Is it possible to use a nested IF statement to match the cells?
View 4 Replies
View Related
Jul 28, 2009
I am currently using an Intersect statement in a worksheet module to perform two things:
1. Insert a time stamp into row 2 when row 1 has a price inserted
2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user.
If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
View 5 Replies
View Related
Feb 21, 2014
Basically I have two sets of data. One will be new each week. I'd like to use the non-changing data as a base to compare new data to. The formula would need to match multiple values, including a 'time between', and then return whether a minimum rate has been met.
SampleRateExamine.xlsx
View 3 Replies
View Related
Apr 21, 2007
I have a few hundred addresses in excel in the following format
NameAddress1Address2Address3AreaCityPin
Is it possible for me to change that into
Namee
Address1
Address2
Address3
Area
City-Pin
View 10 Replies
View Related
Jul 8, 2014
I have an excel sheet that has a lot of APN (parcel numbers) on it. I would like to run that through the assessors page [URL] to get the address and owners name. It seems like a very simple thing to do, but... How would I make it run each parcel through the assessors page to get the name and address information.
View 1 Replies
View Related
Feb 26, 2007
I have a list of addresses (including street numbers and names), but want to select out addresses that match another list of street names only. I have only used vlookup before, but because one list included street numbers as well, I can't find exact matches.
I am using excell 2007.
View 9 Replies
View Related
Jul 8, 2008
I have a form in which a user selects a Suburb, a State and a Post Code (each from a Data Validation List)
Suburb /Town StatePost Code
The 15,000 Suburbs with their associated Post Code and State are correctly sorted on a seperate worksheet in their 3 columns.
The Objective: To determine if the User has correctly chosen the correct matching Suburb, State and Postcode from the 3 Lists.
Problem: I know it is possible to concentate the 3 together and have one List but I do not want to do this I want to meet the objective.
When using VLOOKUP, because their are many Suburbs with the same name and different Postode.... or Same Postcode with different Suburbs etc I am finding it difficult to get an exact match because the VLOOKUP selects the first correct value it finds.
Question: Is it possible to write an IF statement with VLOOKUP to get an exact match across the 3 fields?
View 9 Replies
View Related
Mar 5, 2009
I'm working with a pre-existing list of vendors and currently the addresses for each are in one column. I would like to separate by city, state, zip. I was thinking of text to columns but since the addresses are not all aligned that won't work.
View 9 Replies
View Related
Jul 10, 2006
Any quick way to sort this list of IP addresses?
10.198.16.206
10.198.16.220
10.198.16.248
10.216.100.21
10.216.101.22
10.216.102.21
10.216.103.24
10.216.104.23
10.216.105.22
10.216.105.32
10.216.106.21
10.216.106.31
10.216.107.27
10.216.108.27
10.216.109.23
10.216.11.101
10.216.110.27
10.216.111.21
10.216.111.24
10.216.112.29
10.216.113.49
10.216.113.52
10.216.117.20
10.216.11.101 comes after 10.216.109.23 when Excel sorts the data. I understand the problem is that these are not numbers, they are text.
View 11 Replies
View Related
Jul 6, 2009
I have 2 issues i am trying to work through, i have a spreadsheet with 3 data sheet tabs, the first issue i have is in Data sheet 1 I have a lot of duplicate addresses, I was wondering if there is a way to filter out the duplicate addresses so that only one of each address is showing.
Issue 2 that i have is a lot more complicated, In data sheet 1 i have a list of medical providers that reimburst at 110% or more, each address on that list needs to get 1 letter mailed to them, but i have to keep track of how many are going to each region, i.e. Columbus, OH region, Cincinnati, OH Region, Toledo, OH Region, and Cleveland, OH region. So what i want to do is create a 3rd data sheet that keeps track of total letters sent by region, but was wondering if it was possible for this info to be automatically transfered from data sheet 1 to data sheet 3. I don't need all the information in data sheet 1 to tranfer to data sheet 3. All i need is for data sheet 3 to read off the City field in data sheet 1, and calculate 1 letter sent to that region.
I dont even know if this is possible, but it is way beyond my realm of excel knowledge which isn't much.
Any help would be appreciated. I am trying to attach the spreadsheet, however it isn't allowing me to attach it, i keep getting a database error, when i upload it. It is under the max size limit too. Not sure what's going on.
View 9 Replies
View Related
Jun 19, 2014
I have a table that looks like this:
| A | B | C | D | ...
1 | fu | bar | lab |...
2 | rab| uf | luv |...
3 |...
All of my values are within the Range "A1:C2"
I would like to have a variant array which contains the addresses of this range.
Things I tried that didn't work:
If my variant is V and my range is R,
v = r returns an array which contains
fu|bar|lab
rab|uf |luv
V = R.Address gives me
A1:C2|A1:C2|A1:C2
A1:C2|A1:C2|A1:C2
What I actually want:
A1|B1|C1
A2|B2|C2
i know this can easily be done with a loop, but the table I want to use this on is huge, and a loop takes hours to execute.
View 1 Replies
View Related
Mar 14, 2014
I have two columns of from and to addresses in excel.These are complete addresses with apartment name and pincodes. how can I obtain the distance in km between the two addresses (Both are in the same city) I have used the code in the following [URL].However it seems to give me 0.
View 10 Replies
View Related
Jun 14, 2009
Imagine i have 2 columns: Open and Close, both of these got numbers like
1 ---- 2
3 ---- 1
4 ---- 10
and so on. I had to make a function which checks if some number is in between any of those Open and Close numbers and count how many, for example: im searching for number 1.3, so according to previously drawn table i would get answer of 2, because 2 is in between 1----2 and 3-----1, i achieved this by a simple function:
=IF(OR(AND(Bendras!$J$1>=Table1[[#This Row],[Open]],(Table1[[#This Row],[Close]]>=Bendras!$J$1)),AND((Bendras!$J$1<=Table1[[#This Row],[Open]]),(Table1[[#This Row],[Close]]<=Bendras!$J$1))),TRUE,FALSE)
this generated an additional column with TRUE and FALSE values which i counted with:
=COUNTIF(Table1[T/F],TRUE)
and got the answer.
so now then preparations are ready i need to make a function which would for example if the number i was searching was in 10th and 45th rows find the MAX/MIN values of Close column between those rows(hope i made my self clear)
this is how i was hoping to do that : first of all make a new array of all cell addresses from "Close" column which were "TRUE" from the first function i wrote and when do w/e i like with those cell addresses in other functions.
View 12 Replies
View Related
Jan 15, 2010
Sheet1, Column3 is filled with property addresses, if available (some are blank). I need two columns on Sheet2, Column3 needs to be the street number and Column4 needs to be the street name.
Because it is not 'fixed length', I can't use 'RIGHT' or 'LEFT'
I have attached a sample file. There is other data/information on the sheet, but I can process the rest without help. I will be moving:
Sheet1, Column1 to Sheet2, Column2
Sheet1, Column2 to Sheet2, Column1
Sheet1, Column3 to...as described above...
View 14 Replies
View Related
May 22, 2007
In the address list, some addresses have individual names, some have all Smith or Jones, and some have Smith, Jones, Garcia.
(See attached file)
How can I mark them as "individual", "Family", Household"?
View 14 Replies
View Related
Oct 22, 2008
I have to separate reports. The first report lists the address in 5 columns (house #, Street, City, State, Zip), and the second lists it all in one column. Right now I have to manually check the second report against the first report to see if any of the addresses match. I do this daily, and it's rather time comsuming.
View 4 Replies
View Related
Apr 30, 2009
I am trying to do is summing a range based on a text value that corresponds to a cell address. I have a adddress cell value in say a1 = A$1$ and in a3 = A$10$. If I do a sum function where I want to use these cell values i.e. I use this formula but it does not seem to work, any insights?
SUM(Text(a1;"Text"):Text(a2;"Text"))
View 2 Replies
View Related
Apr 1, 2012
I'm trying to write a Macro that searches all non-blank worksheets of multiple workbooks in a folder for any IP addresses contained within then returns them all to one master spreadsheet.
I've already come up with the code to open each workbook from the master. What I really need is some direction for how to go into each non-blank worksheet and search each one, placing all IPs that are found into a single column in their respective worksheets, say column D for example.
Since I'm not looking for a specific value I assume I'll need some wild card like *.*.*.*
View 7 Replies
View Related
Aug 5, 2013
I have a list of email addresses with the periods stripped before the .com, .net, etc.
How to insert the period to go from example@mailcom to example@mail.com? Obviously the email addresses are of different lengths, but it's always 3 characters after the inserted period.
View 3 Replies
View Related
Jan 6, 2014
When I move the range rDes, another range rOrig with the same address gets changed. How can I prevent this?
Code:
Sub Macro1()
Dim rSrc As Range
Dim rDes As Range
Dim rOrig As Range
Set rOrig = Selection
[Code] ........
View 3 Replies
View Related
Apr 10, 2014
I have tons of addresses that I need to separate into different columns. It should be easily done by using Text to Column but the format is different so it didn't work.
1198 W 1520 N
CLINTON, UT 84015-5301
1198 W 1520 N
CLINTON
UT
84015-5301
798 HOMESTEAD AVE
HOLYOKE, MA 01040
798 HOMESTEAD AVE
HOLYOKE
MA
01040
16765 KENUIL CT
BRIGHTON, CO 80603-8481
16765 KENUIL CT
BRIGHTON
CO
80603-8481
The addresses are copied from a website so it is formatted as 2 lines. Tried to copy and paste (values only) to another sheet and the format was like this:
1198 W 1520 NCLINTON, UT 84015-5301
No space between "N" and "CLINTON".
View 2 Replies
View Related
Sep 4, 2007
This time I have exported messages from Outlook to Excel in an attempt to extract email addresses that are held within the body of the email. An example ofthe email body is this:
This is the qmail-send program at lon5.mailcustodian.co.uk.
I'm afraid I wasn't able to deliver your message to the following addresses.
This is a permanent error; I've given up.
:
212.
All of this is held in one cell with line breaks as shown above. Is there a way of getting Excel to recognise an email address and plonk it in the cell nextdoor? Something like 'find the @ symbol and extract before and after until a space is reached'?
There are a lot of different styles of email body, therefore find and replace would be a very time consuming excersise.
View 9 Replies
View Related
Oct 22, 2007
In column AB i have a massive list of email addresses i want to capitalise the first letters of fist name and surname like:
adam.adam@nowhere.co.uk becomes Adam.Adam@nowhere.co.uk
But they could also be like this adam.2.adam@nowhere.co.uk so they wont always be in the same format.
I have a formula in another column which snatches the name from the email address then a maco which creates a mail based on this i need the email address first and last name to be capitilised so the mail created has the correct case: Dear Adam and not Dear adam.
View 9 Replies
View Related
Jan 4, 2008
I have voter registration pdf where I can open the table of info into excel when I can edit it. When I try to sort the addresses from low to high. example I have 3 main st, 20 main st, 78 main st, 300 main st. When I try to use sort to arrange them from low to high it does not work correctly do you think I am having a problem when adobe opens it to excel or am I doing something wrong?
View 9 Replies
View Related
May 12, 2008
i have a 2D array of numbers (7 columns x 30 rows which doesn't change size nor place in the book).
I have the address of the "starting" and "ending" cells of the area I need to sum (often in more than one row) squeezed between other tables which must not be part of the calculation.
How can i get the sum i need without macros?
Ex:
||A|B|C|D|
|1|1 7 5 0|
|2|5 6 8 4|
|3|2 6 7 4|
|4|8 4 5 3|
Sum from B2 to C4 = (6,8,4,2,6,7,4,8,4,5) = 54
View 9 Replies
View Related
Apr 25, 2007
I'm trying to draft together a simple VBA script or even =HYPERLINK string to utilize a range of cells in Excel for the To: field in an Outlook email.
I have 7 columns each with categorized for different individuals in different departments.
Instead of dealing with contact groups, I have created a spreadsheet that breaks down the departments and supplies the email address for everyone in the department.
So, what I want to do is make a link or button for each group that when it is clicked on will open a new email via outlook with all of the addresses in the appropriate range in the To: field.
Example:
Cell: A1 is the heading
Cell: A2 is the link/button you would click on
Range: A3:A255 would contain the addresses.
One other thing, I'm not positive if this is an issue or not...The script might need to add the customary semicolon and space after each address added to the To: field...As needed when using multiple addresses in Outlook.
View 9 Replies
View Related
