I need a formula to only show me the lines that exclude the initials. Is there a formula to auto-delete or indicate it the text is suppose to be excluded?
I tried using the IF statement but I cannot search for more than 1 exclusion. I actually have about 50 initials I have to exclude.
Example:
TextExcludeCR:1 YearCRCR: Cert equipmentBAAF: (CA) SwitchAFAS/TC: Hot callCFMT: recycle equipmentTC:CR: Cold callBA: Call userCF:Lights out
I am try do is a sumif that Excludes a column if it as 100% in there, I have managed to do the sumif (( =SUMIF(A:A,F3,E:E)+SUMIF(A:A,F3,F:F) )) but
I don’t know what to put if I want to ignore it, if it has 100% in a cell
I have attached a test sheet if someone could have a look and try point me in the right direction
It works out a percentage returned if column E / F = the full amount in column k
I've got a worksheet that has chronological quarterly data for which I'd like to do a 5-year rolling average. The layout is: Column A = Dates, Column B = Values, and Column C = 5-year Rolling Average. My problem is that I want to exclude zero-values from the averaging calculation. I tried the following:
={AVERAGE(IF(B1,B5,B9,B13,B170,B1,B5,B9,B13,B17))}
However, Excel will not accept this formula (I assume an array must be contiguous? Please let me know if that's correct).
I am working with averages of ACT scores and Class rank percentages. I cannot figure out how to exclude all the zeros and/or DNR (do not rank) values that are in those columns. For example if I have 10 items, and 2 are DNR, the I want to exclude the 2 DNR's in my average. I tried putting it in the Row or Column area and unchecking what I wanted to exclude and then drag it into the data area, but that didn't work either.
View 2 Replies View Relatedhow to create a formula that creates an average but excludes the top 10% and bottom 10% values?
View 5 Replies View RelatedI am in need of Back-Dating in order to make payments, I am generating dates for me to deposit the payments in a Bank/Finacial Institution/Lender, however the dates generated need to be "X" days in advance if they fall on any Holidays or Week-Offs..
Now, there could be one or more Week-Offs for some Banks/Finacial Institutions/Lenders and not necessarily a Saturday and Sunday..so preferably it should be dynamic...
There would also be some Public Holidays on which the Bank would be closed ...
I would like to find out if a job took more than 24 hour cycle time (eg. 6:00 am to 5:59:59 AM next day). data:
A1 = received date & time (format "m/d/yyyy h:mm")
B1 = completed date & time (format "m/d/yyyy h:mm")
my formula is '=if(B1-A1>"24:00"+0,"Yes","No"). The problem with the formula is that it doesnt exclude weekends nor public holidays. I couldnt formulate a solution using networkdays function......
I have been using CountIfs with a lot of luck until I added one extra criteria that it ignores.
ORIGINAL FORMULA
=COUNTIFS(ADate, ">" & N$2, ADate, "=" & 10000, WBid, "" & N$2, ADate, "=" & 10000, WBid, "
I'd like to create a drop down list in data validation from a column of data that contains numerous duplicates.
For example, let's say column A contained hundreds of transactions with either North, South, East and West, how could I create a drop down list in another cell that only had four selection options?
I am currently using an Intersect statement in a worksheet module to perform two things:
1. Insert a time stamp into row 2 when row 1 has a price inserted
2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user.
If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
View 2 Replies View RelatedI am attempting to use a previously Set variable as part of the next Set statement, pretty unsuccessfully at present.
My purpose is trying to look up
Code:
tb_SelJobID.Value
from a userform in Col Z then look across the row to Cols D,I,N,S & W (different types of work) to see if
Code:
TbSelYr.Value
matches the year selected then insert a formula in the row to the left. Then loop down to the FinalRow.
Currently my Set Found1 statement does not recognise my Found10 value. I know it will be my syntax as it always is. I have cut down the following code to display where the problem areas are, Found1 thru 5.
Code:
Sub CmdGo3_Click()
Dim Row As Range
Dim FinalRow As Long
Dim Found1, Found2, Found3, Found4, Found5, Found10 As Range
Application.ScreenUpdating = False
[code]....
Windows 7 with Excel 2010
I have an Excel Sheet which I use as Database. The database has 11 columns and I insert data with the following function:
Code:
Sub testInsert()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim i As Integer
Dim strTest As String
strTest = "test"
[Code] .......
Now I want to retrieve this data. i.e. I want all F1 where F2 and F3 are 0 AND I want them ordered descending. I'm trying to achieve this with:
Code:
Sub testSelect()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim mrs As New ADODB.Recordset
Dim strTest As String
strTest = "test"
[Code] ....
The result I am getting looks like this:
9
8
7
6
5
4
3
2
15
14
13
12
11
10
1
I assume, that the data is interpreted as String instead of an integer. But I explicitely stated the data as Integer when storing the data into the DB.
I have created a very long switch statement, which is too long to be placed in one row in VBA. I have attempted to put a space and underscore at the end of one line and continue the statement on the row below by placing a comma at the start of the second line. VBA will accept my efforts, but when I run the statement in the immediate window, the following error appears.
"Invalid procedure call or argument"
I understand that there are certain rules where I can split a switch statement onto two lines, yet I do not know what they may be.
I am looking to have one formula containing two If Statements that minus.
=IF(B6="investment",C6,0)-IF(B7="gross",C6,0)
So the result of If Statement 1 minus the result of If Statement 2.
What I am seeing at the moment in the cell is FALSE and what I want to see is the sum.
If A1 shows 10:00am and A2 shows 4:00pm, then A3 calculates the total number of hours: =(A2-A1)*24
But if A1 shows "Off," then A3 shows 0: =IF(A1="Off",0,(A2-A1)*24)
Now, if I want to change "(A2-A1)*24" to another if-statement, how do I do this? I can always set up a hidden cell (A4) that contains the results of the first if-statement, and then say: =IF(A1="Off",0,A4). But can I do this without going through all the trouble of setting up hidden cells?
Each row represents a call. If a call in column A equals "CW" and it has the highest duration (H:MM:SS) value in column B, then provide me the date (MM/DD/YYYY) for that call that is stated in column C.
i.e.
Column A --- Column B ---- Column C
AB ------------ 0:02:22 ----- 04/14/2007
CW ----------- 0:03:13 ----- 04/16/2007
CW ----------- 0:01:42 ----- 04/13/2007
Thus, the value that should be returned is "04/16/2007".
I have a problem with a formula inserted with control+shift+enter
The formula is
MEAN(IF(' VALIDATION'!$G$2:$G$59999=D30;'VALIDATION'!$E$2:$E$59999))
In the Validation sheet I have the column G with values 0 and 1, and another column E with numeric values.
Changing the value of cell D30, the formula will calculate the mean of the values in column E that have a value equal to D30 in column G.
The problem is that this function works when D30=1 and not when d30=0, in this case the formula returns N/D.
I have tried using also text values instead of 1 and the formula works . The problem is only when D30 is 0
I am trying to have a cell in sheet "Summary" count the number of cells in column DX of sheet "Analyses" that are greater than 0, provided that the value in column A of "Analyses" corresponds with the value in B8 of sheet "Summary."
(In "Analyses," there are 106 subjects, each taking up 64 rows. So, columns 1-64 correspond to Subject 1, columns 65-128 correspond to subject 2, etc. In column DX, each subject has 64 values that are either 0 or greater than 0. In "Summary," each subject has one row that summarizes the 64 trials. I want a single cell in the "Summary," sheet to reflect the number of times each subject produces a value greater than 0 in column DX of "Analyses.") I tried using this formula, but it did not work correctly:
=COUNTIF(IF(Analyses!$A$1:$A$10000=Summary!B8,Analyses!$DX$1:$DX$10000,""),">0")
(Summary!B8 = 1, so I am trying to calculate the number of values in DX that are greater than 0 only for subject 1.) When I press enter, this yields a value of 384. This is impossible, given that subject 1 only has 64 possibilities of yielding a value greater than 0. Subject 1 has 2 values in column DX that are greater than 0. I tried making this an array formula by pressing Shift+Ctrl+Enter, and that just gives me a #VALUE! error.
What I'm trying to have happen is when I enter a cost ($50,000-$240,000) in Sheet 1, I want the fees (cell B2) to correspond to what they are on sheet 2. How should I set up an if statement for this?
View 3 Replies View RelatedHow do I write an if formula for the below example. X = A Week Number. If(X is between 1 and 4,"Y","N").
View 2 Replies View RelatedHere is what I have right now, =if(i3:i133="MLB"&if(b3:b133="W",c3:c133))
Basically the statement needs to contain two "ifs". I have a column that has MLB, CFB, NFL, etc and a column that designates wins and losses. So, what I am trying to make it do is say if i3:i133="sport" AND if b3:b133="W" then add those up.
I have a sheet where A2 is machine name A3 needs to put a -1 if A2 is either Machine 1 or Machine 2. I looked and cant find what I need. I know this should be a no brainer but having problems. here is what I have
=IF(A2="Machine 1",-1,"") or IF(A2="Machine 2",-1,"") this doesnt work
I have also tried something I found
=IF(OR(A2="Machine 1",A2="Machine 2"),-1,"")
How do i say if x is not equal to #value! in a formula? In the context of...@search() returns #VALUE! when the search string is not found. So: =OR(SEARCH("price",$A4) **NOTEQUALTO#VALUE!** ,SEARCH("pricing",$A4) **NOTEQUALTO#VALUE!**)
View 5 Replies View Related=IF(ISBLANK(G9) or ISBLANK(H9),"",(G9+H9)/F9)). How can I get the above if statement to work?
View 4 Replies View RelatedIf d6 and d7=0 then put 0 but if one of them contain any other value then roundup as below based upon the cell with the different value. I current have this formulae:
=IF(Parameters!D6=0,0,ROUNDUP((Parameters!D6*1000)/Parameters!D11,0))
I am trying to do and IF within an IF like i could do in java. Although i unsure now to whether this can be done within VBA and whether the syntax i am using is correct.
The situation is that i have to two cells with a list of information within them both.
For example cell (2, B) has options 1, 2 and 3 & cell (3, B) has options a, b and c.
If option "1" is selected then either option "a", "b" or "c" can be selected that will therefore show different information in another cell within the worksheet.
I want to create code that will check if a number of cells is empty and if they are to call a sub. If any of the cells are not empty then call another sub.
I am looking to get my vb code to do a simple thing, i need it to look at a date on my excel doc and to flag a messagebox that it cannot run due to date passed only if the date is exceeded and to stop at that point.
View 4 Replies View RelatedI have a bit of code in which I am trying to use the or statement. I've tried a couple of methods but neither seem to work. Is "or" a valid command in VBA?
View 3 Replies View Related