I am try do is a sumif that Excludes a column if it as 100% in there, I have managed to do the sumif (( =SUMIF(A:A,F3,E:E)+SUMIF(A:A,F3,F:F) )) but
I don’t know what to put if I want to ignore it, if it has 100% in a cell
I have attached a test sheet if someone could have a look and try point me in the right direction
It works out a percentage returned if column E / F = the full amount in column k
I have been using CountIfs with a lot of luck until I added one extra criteria that it ignores.
ORIGINAL FORMULA
=COUNTIFS(ADate, ">" & N$2, ADate, "=" & 10000, WBid, "" & N$2, ADate, "=" & 10000, WBid, "
I have many kitchens using the same recipes. I need to distill information down until I've got a summary of how much is being made. Uploaded is a condensed version of the point in the process I'm having difficulty with. This workbook will pull information from 8 other workbooks and give me excatly what everyone made on any weekday.
And from there, with the kind help of this forum, I figured out how to do a SUMIF based on the recipe number. And it summed up all instances of 'Recipe X' being used. However, it continues to SUMIF itself all the way down the page... which is good, because of how recipes are chosen for each kitchen. However, I only need to report one instance of each recipe.
In the uploaded example (and I apologize for the colorful sheet, but it helped me double check what I was working on.) ... I only need to report the PURPLE results elsewhere... the first instance of each SUMIF.
I need a formula to only show me the lines that exclude the initials. Is there a formula to auto-delete or indicate it the text is suppose to be excluded?
I tried using the IF statement but I cannot search for more than 1 exclusion. I actually have about 50 initials I have to exclude.
Example:
TextExcludeCR:1 YearCRCR: Cert equipmentBAAF: (CA) SwitchAFAS/TC: Hot callCFMT: recycle equipmentTC:CR: Cold callBA: Call userCF:Lights out
I've got a worksheet that has chronological quarterly data for which I'd like to do a 5-year rolling average. The layout is: Column A = Dates, Column B = Values, and Column C = 5-year Rolling Average. My problem is that I want to exclude zero-values from the averaging calculation. I tried the following:
={AVERAGE(IF(B1,B5,B9,B13,B170,B1,B5,B9,B13,B17))}
However, Excel will not accept this formula (I assume an array must be contiguous? Please let me know if that's correct).
I am working with averages of ACT scores and Class rank percentages. I cannot figure out how to exclude all the zeros and/or DNR (do not rank) values that are in those columns. For example if I have 10 items, and 2 are DNR, the I want to exclude the 2 DNR's in my average. I tried putting it in the Row or Column area and unchecking what I wanted to exclude and then drag it into the data area, but that didn't work either.
View 2 Replies View Relatedhow to create a formula that creates an average but excludes the top 10% and bottom 10% values?
View 5 Replies View RelatedI am in need of Back-Dating in order to make payments, I am generating dates for me to deposit the payments in a Bank/Finacial Institution/Lender, however the dates generated need to be "X" days in advance if they fall on any Holidays or Week-Offs..
Now, there could be one or more Week-Offs for some Banks/Finacial Institutions/Lenders and not necessarily a Saturday and Sunday..so preferably it should be dynamic...
There would also be some Public Holidays on which the Bank would be closed ...
I would like to find out if a job took more than 24 hour cycle time (eg. 6:00 am to 5:59:59 AM next day). data:
A1 = received date & time (format "m/d/yyyy h:mm")
B1 = completed date & time (format "m/d/yyyy h:mm")
my formula is '=if(B1-A1>"24:00"+0,"Yes","No"). The problem with the formula is that it doesnt exclude weekends nor public holidays. I couldnt formulate a solution using networkdays function......
I have "systems" that have multiple "units". I what to sum values for units that have EXACT MATCH in the system column. Example data is below.
I am trying things like =SUMIF(B:B,"EXACT MATCH",C:C)
How do I express exact match? For example the first 3 in the list I would want to return a value of 9. Note: Lists can have up to 3000 rows and > 1000 system ID's.
Unit ID
SYSTEM ID
Qty
MRK0012179
MRK0012179
3
[Code] ......
I have a worksheet (A) similar to the following:
Jan '12, Feb '12, Mar '12 --> Header Row
-5, 10, 2
6, -2, 3
5, -2, -1
I have another worksheet (B) with the same header Row (Jan '12, Feb '12, Mar '12). I need to create formula in cell A2 on worksheet B (right under Jan '12) that dynamically locates the Jan '12 column in worksheet A and then sums the numbers in that column only if they are < 0.
So in cell A2 on worksheet B (under Jan '12) I'd have -5 (only -5 is < 0), in cell B2 on worksheet B (under Feb '12) I'd have -4 (-2 + -2) and in cell C2 on worksheet B (under Mar '12) I'd have -1.
I've tried several variations of sumproduct, sumif, index, etc. with no luck.
I have Excel 2003 and my problem is to execute a SUMIF formula between 1 column (where a simple equal criterion must be verified) and 1 row.Let's suppose that column A contains these values:
A1: a
A2: b
A3: a
A4: d
and suppose that the criterion is the equality with the character "a".
Let's suppose that 6-th row contains these values:
A6: 1
B6: 2
C6: 3
D6: 4
Now, I would like to execute a SUMIF between the first 4 elements of A column (a, b, c, d) using as criterion the equality with "a", and the first 4 elements of 6-th row (1, 2, 3, 4).............
I am trying to use a sumif formula to sum an entire row if it meets the selection criteria
For example if I have months in Column A (appearing more than once), and Various Totals for each month in Columns B, C and D I want to be able to sum the total of B, C and D for every occurence of the month in my list. Trick is I want to be able to avoid sticking a total column in say Column E
I tried SUMIF(A:A,"Month",C:E) but it is only adding up column C
I have a spreadsheet that lists something like this (an easy version of it anyway!)
On tab 1 of my spreadsheet I have a table with lots of data similar to:
Column A Column B
111 12.23
111 14.32
222 48.23
222 28.34
222 10.23
222 33.40
333 23.21
On tab 2 of my spreadsheet I have unique versions of the data Column A on tab 1, for instance:
Column A
111
222
333
I would like to have a formula on tab 2 that can compare column A on tab 2 with column A on tab 1 - if it is similar I want it to total the amounts for all of the values equal.
So for instance, on tab 2 the final data should be this in my example:
Column A Column B
111 26.55
222 120.20
333 23.21
I've seen formulas that are similar.. but the condition is it can only total the rows that match. And preferably can do this from the other sheet.
In the B column i have dates. In the C column i have total hours.
Right now the following code counts how many instances of a date (Dt) are found and makes a decision if it is more than 3.
VB:
IVAL = Application.WorksheetFunction.CountIf(WS.Range("B:B"), Dt)
If IVAL > 3 Then
What i need is to SUM the hours (C column) for each instance of the date (Dt) in the B column, and test if it is greater than 24. so it would be similar to this:
VB:
IVAL = Application.WorksheetFunction.SumIf(WS.Range("C:C"), Dt)
If IVAL > 24 Then
Except that this code attempts to sum the hours of the C column and also wants to recognize the dates from the C column which would not work. I need something different than SUMIF. I need it to Sum the C column for the appropriate dates (Dt) in the B column.
I have a spreadsheet using a SUMIF formula =SUMIF(G:G,A2,D:D) that is working fine.
However, I wish to introduce a "multiplier" column (E). That is, if the corresponding row has a figure in the E column I wish to multiply that figure with the corresponding figure in D.
D E G
6 5 A
5 0 B
4 0 A
A = 6 x 5 + 4 = 34
B = 5
How would I SUM all the results from results 1-5 if say ITEM in column A = C?
SUMIF wont work as it only sums the first column...
ABCDEF1ITEMRESULT 1RESULT 2RESULT 3RESULT 4RESULT 52A1227723B1075554C21772 5A1010 3376A5 23357B133 7 8C7 1 29C555 10B72772
How to use formula approach to get the total figure for A & B
A
1
2
3
B
4
5
6
[Code]....
I'm trying to use the Sumif formula when the "Sum_range" parameter is dynamic. I can identify the column number (by using "match" formula) but I have no idea how to use this information as a parameter in my SUMIF.
View 2 Replies View RelatedI am trying to setup formula so I can enter column letter and sumif should update with proper sum range to be summed ...
View 4 Replies View RelatedI know how to use array formulae to create a unique list, i.e.{=INDEX($G$1:$G$760,SMALL(IF(ROW($G$1:$G$760)=MATCH($G$1:$G$760,$G$1:$G$760,0),ROW($G$1:$G$760)),ROW()))}
however this is giving all the unique items from column G and I only want the unique items that have a non-zero value in column H as well. This would be the sumif of all instances that would have to be zero. I've tried to crack it and I've tried to search for solutions but so far no joy.
I'd like to create a drop down list in data validation from a column of data that contains numerous duplicates.
For example, let's say column A contained hundreds of transactions with either North, South, East and West, how could I create a drop down list in another cell that only had four selection options?
A1:A10 = Criteria Range 1
B1:B10 = Criteria Range 2
C1:E1 = Criteria Range 3
How to sumif all 3 criteria are met?
I have a set of costs in column c (more that shown below) that have an indicator - for example 0 or 30 (there are more).
I need to populate rows 18 and 19 with the sumif - i have other tables where it is a straighforward sumif as the periods align, here though I need to check that the periods (rows 4 & 16) are checked and then the right data entered underneath.
I can't find a way to combine the sumif, with an if statement checking that the period is correct too? ...
I'm trying to create a SUMIF statement that that has an embedded OR statement within, and am unable to make it work.
Basically I want to say if "column Q" equals one of 2 criteria ("cat" or "dog") then sum the corresponding number in "column P" I've tried the following statement, but it is just resulting in a zero:
=SUMIF(Q9:Q32792,OR("cat","dog"),P9:P32792)
I've seen support on statements with multiple criteria in DIFFERENT columns, but not if searching for multiple criteria in the SAME column.
In the attached workbook, see the "P & L" tab, cells I30 to I48. The idea of the formula I have placed into these cells is to drag out the figures from column I in the "Trial Balance" tab of the workbook. A similar formula is used succesfully in the "balance sheet" tab in Column B. I don't understand why the formula doesn't work in the cells i've specified in in the " P & L" tab it seems to work for I8 and the rows immediately below it "revenue".
UK Trial Balance May 2014 V2.xlsx‎
I have a download from an accounting general ledger which has the following:
Column A: Category Description
Column B: Country
Column C: Department
Row 1: Months
Note: Each row contains the last 12 months worth of costs
As the categories/criteria can appear multiple times, and there are thousands of lines, I have been using SUMIFS to calculate totals my required combinations (eg. Travel expense, Germany, Sales department)
Every month, the information refreshes to show the most recent 12 months worth of data. And this means I need to manually update my formulas to correct the month column headings, as everything moves by 1 month.
Would something like a SUMIF with a SUMPRODUCT work? Eg. if current month = July, then it would sum everything from the July column automatically?
I have a column of contract numbers of varying length. I want to run a sumif of all of the values on my reference sheet that have the contract number beginning with the contract number in my listing. All of the the contract values in my reference sheet are very long. Since the numbers I am working with vary in length, i don't know how to match this string in the sumif function
I want something like this
=SUMIF('Reference Sheet!$A$5:$A$13410,LEFT("", LEN('Select Contracts'!$C6))='Select Contracts'!$C6,'FINALIZED DATA'!$H$5:$H$13410)
Is there a way to refer to the range in the sumif function,
I am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.
View 9 Replies View RelatedI want to sum values in a column only if the year of the date in the adjacent column is <= to the year in cell F61. the column to evaluate is in the format d/mm/yyyy, and F61 is just yyyy. What I want to accomplish but it doesn't work:
=SUMIF(year(I9:I57),"<="&F61,H9:H57)