I want a message to show up if I have any of 6 selected cells empty? It basically serves as a reminder to fill in all required cells in a sheet that may be located in different cells. How can I write a formula in one cell that will look at all source cells and tel me that some are empty?
NameAgeLocation
Joe******
HeightWeightTime
******3 PM
Formula Here to verify all filled in.
i really want to make it into a range formula but cant work it out.
View 2 Replies View RelatedI have a set of data covering cells A8:C71
Column A lists locations - there maybe upto 6 entries with the same location.
Column C lists a unique serial number.
The list is sorted by column A (A-Z).
For this example say location LONDON has 3 entries, with serial numbers 120, 125, 128.
In cell F1, i want to display the lowest serial number for LONDON
In cell F3, i want to display the 2nd lowest serial number for LONDON
In cell F5, i want to display the 3rd lowest serial number for LONDON
I have tried the following formula, with no success..
=LARGE(VLOOKUP(I9,A8:C71,3),1)
how to shift data in a column down multiple rows while in an IF statement. I am assuming you cannot just simply repeat the insert cell formula.
Here is my code - it's ugly but it was working when I just needed it to move down one cell:
lastrow = Range("A2").End(xlDown).Row
For i = 2 To lastrow
Range("B" & i).Select
If Range("B" & i).Value = Range("B" & i).Offset(-1, 1).Value Then
[Code].....
I have two columns one of which has filenames and the other having values. I need to creating a macro that takes each value from a cell outputs it into a text file and then saves it with the filename of the cell next to the value. I'll need it to go down the columns and create separate text files for each.
View 7 Replies View RelatedI have a workbook with 30 worksheets. Each sheet has 84 rows of data (start in 15 columns (A to O). I would like to create a summary sheet that only shows the most important data from each sheet.
The summary sheet would have 12 lines of headers and formatted crap at the top.
The Summary sheet header columns would be:
Site (A), Date (B) Health (C), Status (D), Critical (E), Task (F),
Dependencies (G), Owner (H), T-Date (I), Task Date (J), Mitigation Date (I)
The data in the sheets are not in that order, of course.
That
1. puts the name of the sheet I am copying from in column A
2. the deadline date in Column B (that date is always in C10 of each worksheet)
3. and copies Cells from Column A,B,G,H,I,O in any row in which the value in A is not "good" into columns C through H. I would like to paste those rows into the summary sheet. I have code that loops through the sheets and rows in each sheet to find the rows to copy. I can copy cell values directly from the active sheet to the summary sheet, but because I am copying a cell at a time, it takes 7 minutes. Yes I am impatient :)
Here is the code snippet where the copying is done:
Dim sh As Worksheet 'current worksheet
Dim DestSh As Worksheet 'worksheet in which to paste summary
Dim Last As Long
Dim CopyRow As Long 'row to copy
Dim LastCopyRow As Long
[Code] ........
ExitTheSub:
Application.Goto Sheets("KMARollup").Cells(1)
End Sub
I think there must be a way to use ranges to build an array of cell values and paste only once but I am lost here.
I have a ss that has item descriptions, quantities and pricing.
Item descriptions are identified by a letter (a, b, c, etc) and in cells C20:c32. These are selected by drop down box. Item quantities are in cells E20:E32.
I want to evaluate cells C20:C32 and determine what letter is chosen. If A is selected in any cell C20:c32 I want to count the quantities for A in cells E20:E32. I can't quite figure out how to do this.
I'm after a formula that will look at a number of cells(that are not in a range) with the word "C" and if they all = "C" then I want the cell to come back with the result "yes" otherwise "no".
View 12 Replies View RelatedI need to see if it is possible to set up an IF statement that can pull information from cells based on the results already available in those cells.
ABCDEFGHIJKLM1Non FeaturedGoodGoodIdentical IMEIsGoodNeeds RLM NumGoodGoodGoodChk DOA BoxGood32Non FeaturedNo ExchangeGoodGoodGoodNeeds RLM NumGoodGoodGoodChk DOA BoxGood23
What I need is a formula in cell M1 that will check each cell B1 thru K1 for the data "Good". If it does not equal "Good", then I need the checks true/false value(s) to show the reason shown in the other cells.
In other words, for row 1, i need a formula where the outcome would be "Identical IMEIs" because D1 is the first box in the set that does not equal "Good". Then if D1 was corrected to "Good", the outcome would then be "Needs RLM Num".
I tried to do it in sections such as {=IF(B7"Good",B7, then the next check )} but the number of statements exceeds the number of IF statements that can be nested. And I really need the formula to fit in one cell.
how to write a formula or function to add up adjacent totals in column B that match the "name" in column A?
For example:
Mary's name is entered multiple times in column A and her earnings are recorded in column B adjacent to her name. How do I add up her totals only with a IF statement?
How do I set up the formula bar so it doesn't cover the column headers?
View 1 Replies View RelatedI am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedI have a couple of spreadsheets that has several columns each containing several hundred thousand rows of codes. To quickly analyze this data, I am trying to come up with a conditional formatting formula to highlight the respective cells when specific values occur next to each other. A particular code will show up in many cells, but the code that is the respective adjacent cell is always different. I need to know when row A contains, for example, '9928559' and row B contains '36415RT'.
View 3 Replies View RelatedI have 2 columns of data and want to be able to merge as follows
COL A COL B
4123567 123.45
4125467 900.56
4356456 456.32
need to get result of
COL a
4123567
123.45
4125467
900.56
4356456
456.32
I am trying to merge text, in four adjacent cells in the same row (say cells A1,A2,A3 and A4), into a single cell (say cell A5).
I would like a comma or full stop and then a space between each item merged (cell A5).
The text to be merged may appear in any one of the four cells (cells A1 to A4). Those cells without text are blank.
Only where all 4 cells are blank, will I need cell 'A5' to indicate this.
The formula needs to be relative as I will need to copy the formula down the spreadsheet so that it applies to additional rows.
I’m trying to make my life a bit easier, by adding a few macros and formulas to the spreadsheet (Everything was done completely manually before I got here!!!).
What I would like to do is take two columns, which contain a start and end time for work shifts, and colour them GREEN once I have entered a name in the Worker column (Along side the two with the time), and also to fill a cell with a Yes or a No. I’m aware of auto conditioning, and I’ve tried to have a play to get this to work, but I just can’t work it out.
I have posted a link to an image which shows what I want. I hope I've explained it well enough!
http://img530.imageshack.us/img530/6239/excelspfk0.jpg
I would like a macro that when run, finds empty cells in a column within the used range and fills them with the same formula in the other cells in the same column but relative to the row.
I have a basic understanding of VBA so if someone can set me on the right track i'll have a go myself as i appreciate this would take a while to write out from scratch.
I am working with an excel spreadsheet. There is a column for "name", and then the next column is for medical condition.
If the same patient has multiple (say, 4) conditions, the rows for "name" are combined into a single cell(let's say, a cell going from row 2 to row 5, witha a single name in the combined cell) , with the next column having four different cells adjacent to the single cell (cell 2 has "bleeding", cell 3 has "fever", cell 4 has "diarrhea", and cell 5 has "rash"). Some patients have only single conditions, single cells.
Will this mess up COUNTS and COUNTIF?
Is there a way to split the combined cell2-5 for ''name" into four cells all containing the same name?
I am trying to create a formula which looks in 1 cell to determine 'IF' it states either "BUTT CUT" or "DIE CUT" and then does a VLOOKUP in a table array for each which ever column relates to asnwer to 'IF statement.
This is as far as I have got but even this won't work:
=IF(I15="BUTT CUT",=VLOOKUP(J15,V13:Z22,2,FALSE))
I'm looking to work out an IF statement based on a series of dates entered to give 1 of 3 possable outcomes. Where:
A1: todays date (exmaple =NOW())
B1: due date (exmaple 10/02/09)
C1: completion date (example 12/02/09)
D1: status (overdue, outstanding or completed)
D1: =IF(A1>B1,"overdue",IF(A1<B1,"outstanding",IF(C1<=>A1 & B1,"completed")))
I know the last part is totally wrong (symbols arranged in that manner), but to clarify i would like the date entered in C1 to override the other statements in the fomula to make it read "completed". If no date is entered in C1 then the formula will return either "overdue" or "outstanding" depending on the other dates in A1 and B1.
I need some formula to sum data with adjacent row and multiple 10 number, For example :
name
cost
expected result
mike
5
45 = 5 + (4x10)
4 (x10)
deby
3
27 = 3 + 4 + (2x10)
4
2 (x10)
sisca
6
6
I am generating a chart through a macro. I am using 4 non adjacent range and the end point of the range is represented by a variable as the end point is not fixed. I am using following code.
Row = 5
StartPoint1 = "C19"
EndPoint1 = "C" & 19 + Row
StartPoint2 = "E19"
EndPoint2 = "E" & 19 + Row
StartPoint3 = "G19"
EndPoint3 = "G" & 19 + Row
StartPoint4 = "I19"
EndPoint4 = "I" & 19 + Row
ActiveChart.SetSourceData Source:= Sheets("Summary").Range( _
"StartPoint1:EndPoint1,StartPoint2:EndPoint2,StartPoint3:EndPoint3,StartPoint4:EndPoint4"), PlotBy:=xlColumns
Code:.....
I am constantly editing this (we currently have over 100 accounts) and therefore the totals are changing.I have a formula for Total but I need formulas for the other two, based on when the cells in columns F and J are blank or have dates in them: For active, the total is the sum of all numbers in column M but only when there is a date in column F and a BLANK in column J. For yet to enter, the total is the sum of all the numbers in column M but only when both column F and column J are blank. At the moment, my accounts run from row 6 to row 142, with the first line of totals in row 145, however this is constantly expanding.
I have multiple sheets cataloging multiple vehicles' mileages in multiple areas (one sheet per month). I want to reorganize this data by Vehicle ID rather than month.
Here is an example spreadsheet to help explain
I have attempted this by writing this formula ...
As per the attached file – I am trying to mark (with an X) the first 5 Adjacent cells which SUM up (and above) 480. As you will see, in some instants, one of the 3 formulas is correct. I am looking for a formula to work correct IN ALL situations.
In Col. A I marked (light Blue Background) the FIRST 5 cells which meet the Condition. In Col. F are the sum results and those which meet the Condition
are in Bold RED.
I need to have three rows link to each other. The first column cell A is a paste link and is always changing. The second B is a vlookup referenceing A and finding it in a changing table...the source for the paste link. C needs to follow the other two cells and remain "attached" to it. However, C has to be a cell that is hardcoded somewhere, meaning that C is not found in the source data and must be determined by a person. I have tried to link the sheets through vlookups and other formulas, however, this only works when the data is sorted and nothing new is added. I need a static sheet that can take in new values. I need to create some sort of relationship between the cells
View 14 Replies View RelatedSee the attatched spreadsheet. I can not seem to figure out a formula that will calculate the totals for each type of data.
My goal is to have a sum for each location for # of audits, Critical Counts, and Major Counts.
I have list of names of people in a billboards league. Directly to the right of everyone's name in the adjacent cell is their "win percentage". These percentages are sorted in descending order and I need the names to move along with the adjacent cell as the percentages change. When i merge the cells things get really messy.
View 1 Replies View RelatedI need the syntax that allows me to reference the cell directly beside my target cell for each row in a column
Like:
Col A Col B
S D
T F
S F
If i was targeting Col B
In the following spreadsheet, I'm trying to automatically count the amount of times an A code (A1 or A2) or B code (B1 or B2) appear under each person's name in the K1:M5 table.
View 3 Replies View Related