Identify Bottom Left/Right Cell In Named Range
Aug 24, 2006Is there any easy way to identify the bottom left cell in a named range?
View 6 Replies
ADVERTISEMENT
Find The Bottom Left Cell Of A Range
Oct 27, 2008I am trying to find a code that will simply find the last cell in Column A of a named Range (titled: ConditionlFormatArea)?
Also IF I could get a line(s) of code that would just find the last cell in Column A of the Used Area.
I ask for both because I am not yet certain which line of code will work best for me.
When I have that cell located I need to Remove the Conditional Formatting. I think I can get the code for that part.
VBA To Identify Top Left Cell Of A Selected Range
May 4, 2008if a user has selected a range, how do you, in VBA, identify the:
1. Top left cell
2. Bottom left cell
3. Top right cell
4. Bottom right cell
For example if user has selected the range B5:M30, then we would want to identify in the macro:
1. Top left cell = B5
2. Bottom left cell = B30
3. Top right cell = M5
4. Bottom right cell = M30
Top Left Cell In Named Range
Mar 21, 2007I have a named range call "Options".
How do I find the top left cell of the range using a formula? Note: I do not want to use VBA if I don't have to.
Loop Range Of Cells. Top To Bottom, Left To Right
Nov 7, 2006I have a spreadsheet which is going to be populated everyday from figures from another spreadsheet using autofilters and the very useful SubTotal worksheet function. I'll attach a copy of the work in progress, also there will be a macro in here which Everytime the user presses update, it copies a range of cells and formatting and pastes it to the next available cell on the right. I've also drawn the movement of the cells i'd like The reason being, is that its going to give day to day, up to date figures from a datasheet.
The problem i have is that when i come to populate the grid which has been copied, i need a calculations to populate each cell in the Less<1week column, then when it gets to the bottom, move Back to the top, and accross to the right 1, and then populate down again, and so on until the end of the grid in question, i dont think i can use a for/next loop becuase it will be a different column address everytime. I dont really like loops, but i feel this needs it.
Identify Bottom Quarter Of Data
Dec 21, 2006I have a column of data that comes from simple division formulas, E2/F2. I am wanting to take the Percentages given and quickly recognize the ones in the bottom quarter.
100%
75%
23%
39%
50%
N/A
100%
5%
8 items - the lowest 2 (the bottom quarter) should "stand out" - 5% and 23%
I figured two options:
1.) Conditional Formatting - don't know what the formula would be to use
2.) If statement - preferred method.
I would like in the cell next to the percentages for there to be a blank cell if the amount is not in the bottom 25% and if it is I would like the cell to read "Yes"
I thought something along the lines of =if(G2 in range(G2:G100)is bottom(.25),"Yes","") Of course that is not real code. I'm hoping someone will be able to edit that to make it functional. Or guide me in the right direction.
And you may have noticed the "N/A" in the list above. I would like excel to view this as 100%, at the least just ignore it and don't give me an error.
Determining If Cell Is Part Of Named Range And What That Named Range Is?
Aug 16, 2014Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
Copy/Paste Cell To Named Range Named In Adjacent Cell
Sep 4, 2007I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.
The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.
Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")
Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select
i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop
Identify First Cell Of Print Range
May 27, 2008I'm looking for a way to identify the first cell of a page without using the pagebreak function: Sheet6.Range("B" & Sheet6.HPageBreaks(i).Location.Row). The reason being is for overall speed and performance as well as avoiding <out of range> errors on the last break. If I use totalPages = Sheet6.HPageBreaks.Count + 1
to determine the number of page breaks, is there a way to identify the first cell of page i in this way?
How To Identify Last Cell Of Single Column Range
Mar 30, 2013How can I identify the last cell of a single column range . . . i.e. the last cell address of range C1..C15 is C15. The range will have a name of "reg".
View 9 Replies View RelatedAdd X Left Most Characters Of Range Into Cell
Oct 14, 2007I'm trying to figure out why i'm getting this error: "Object variable or With block variable not set" for this
Sub Macro3()
Dim cel As Range
Dim str1 As String
Dim SearchThing As Range
Set SearchThing = ActiveSheet.Range("I34")
str1 = Left(SearchThing.Value, Len(SearchThing) - 4)
cel.Value = str1
End Sub
The error is specifically with this line
cel.Value = str1....................
Find Matched Value In A Range For Named Cell Then Copy Range Cells Below
Aug 6, 2013I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
Excel 2010 :: Shifting Cells Left And Then Up If Left Cell Is Blank?
May 8, 2014I have a 2010 excel sheet containing 14 columns and 45082 rows in total. I am quite illiterate when it comes to writing macros but I know that what I need can be achieved with a set of codes.
To be more clear, I inserted two tables below. The first one represents the current data structure, and the second one is the way I want my data to look like.
Current data structure looks like
Variable 1
Variable 2
Variable 3
[Code].....
Match Named Range To Range/Cell Address
Aug 25, 2006I know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?
View 4 Replies View RelatedExcel 2007 :: Deselect All Cells In Range Except Top Left Cell
Apr 13, 2013I have a range selected (A4:C15).I would like to deselect the range and make A4 the active cell. Is this possible without a macro?
With a macro, one could use:
Application.Goto Selection.Cells(1)
I generally select a large number of cells and would like to go back to the start cell in the range. I could do it by pressing the left and right arrow keys but is there a shortcut that will allow me to do the same?
Dynamic Range Used Named Cell Range
Jul 7, 2014Line of code that will Select a Named Range in this case I have Named a CELL "DataSummary" Need to use that named range by selecting 30 columns and 54 rows.
Range("DataSummary),(??,??) doesn't work.
Named Ranges On Multiple Sheets With The Same Named Range & I Cant Figure Out How To Do This
Jun 2, 2006I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies View RelatedNamed Range/cell
Nov 24, 2008I want to go to places defined in a sheet.
the first works on my computer but not on another.
The second two do not work yet but think i am on the right track
For Each Cell In Named Range
Aug 27, 2009i'm looking at copying the values in a named range to a certain set of Cells when i alter a drop down.
i know how do the majority all i'm stuck with is create a "For each" loop with the named range like so:
Named Range In A Cell
Jun 26, 2009Might it be possible to revise the parameters of a range name via the contents of a cell?
For instance:
A1 B1
Date A1:A10
If I change the contents of B1 to A1:A15 can that redefine the parameters of the range named Date from A1:A10 to A1:A15?
Making Named Range The Last Active Value Used Within Another Named Range?
Jul 19, 2013I'm trying to make my named ranges remember the values of the last active cells used within another named range. The purpose of this is to make my charts dynamically change dependant on two criteria selected. My spreadsheet currently updates itself as and when I change the active cell within a single named range, dynamically changing the chart data by using Lookup based on the active cells value. However I want to get away from having several charts showing, I would like to have a single chart which dynamically changes based on a second selection. So the first selection is for a department (Facility) which changes the chart data relevant to that department, the second selection is to dynamically change the chart shown for the pre selected department.
Picture2.jpg
Using the following code when updating just one criteria with several charts
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Application.Intersect(ActiveCell, [MeasureType]) Is Nothing Then
[valMeasurePicked] = ActiveCell.Value [code].....
which works fine but I'm not sure how to add a second selection criteria because my code uses Activecell. I thought that the VBA needed to set the last used value of a range as a variable and therefore allow the second criteria to be selected but am not sure how to put it into practice.
Run Macro On Double Cell Click If Cell Part Of Named Range
Feb 6, 2008I have a sheet where i have many differently named areas (like state1_1 and state1_2) When I doubleclick on a cell then a macro should run with following criteria: 1) Macro will run if the doubleclicked cell is part of any range in the list. Here I mean that names of ranges which belong to that list start with word state (like state1_1 and state1_2). No other ranges should not be in that list. If the cell is not in the range that is part of the list, then nothing should happen.
View 2 Replies View RelatedLook Up Text In Cell From Specified Named Range?
Jan 8, 2014I've got a workbook set up. One tab has a bunch of named ranges, let's say Tables 1-6. The second tab has vlookups for selected values from a sharepoint data pull (in order to parse through the sharepoint stuff, most of it is nonsense).
What I am trying to do is write a formula for cell E2 that:
-Step 1: Looks into whichever range the user specifies, 1-6 (probably using the indirect function).
-Step 2: Searches the specified range for text found in cell F2 (a string of text with values from one or more of the ranges 1-6)
-Step 3: Returns the text.
Selected Cell Within Named Range?
Dec 23, 2008I want to use the Worksheet SelectionChange event to update part of my worksheet/UI depending on what cell(s) the user has selected.
As an example, if I have two named ranges - $A$1:$B$10 and $C$1:$D$10 - I want to detect whether the user is in range 1, range 2, or neither, then update elements of the UI.
Get The Value Of A Single Cell In A Named Range
Mar 20, 2009I have a workbook with a named range myrange, cells a2:a1001. I have counter as a named range, mycount cell z2. I want to get the value of myrange at cell address mycount and put that value elsewhere using vba.
View 2 Replies View RelatedPassing Named Range From Cell Into VBA
Jun 6, 2014I'm trying use a worksheet that contains named ranges as the source in a macro that will dynamically create pivot tables. The named range could be anything so it can't be hardcoded in the vba and has to come from the worksheet.
In my example, the string strI = "policy" which I know because the msgbox displays the string.
Code:
Dim strI As String
strI = Chr(34) & rngIn.Cells(1, 4).Value & Chr(34)
MsgBox strI
Application.Goto (strI)
But when I try to use strI in place of a hardcoded named range, it always gives me (Reference is not valid) error using the string variable in the following code but never when it's hardcoded in as "policy".
Code:
'This errors out
Application.Goto (strI)
'This works
Application.Goto ("policy")
Single Cell In A Named Range
Nov 6, 2008I have a large amounts of named ranges each of about 100 rows 20 column's each in its own sheet and I need to be able to refer to a singe cell in that range.
I want to do this so that I can use an offset to get another cell value relative to the cell in the named range.
F9 contains a hyperlink to the named range and is the same as the named range but with spaces.
A couple of things that I have tried are below:
=OFFSET(INDIRECT(SUBSTITUTE($F9," ","_")),1,0)
=OFFSET(VLOOKUP("bob",INDIRECT(SUBSTITUTE($F9," ","_")),14,FALSE),1,0)
Neither of these work, I am asuming it is because I dont have a specific cell reference named for the offset?
VBA - Replacing A Cell Ref With A Named Range
Jul 14, 2009I have code that was working with cell references. I replaced one of the cell references with a Defined Name that I applied to the cell that was previously referenced in the code. The code does not work with the Defined Name now. In the code below, the Name "FeeType" was previously where the cell reference was. I have attempted to fix the reference by changing the use of " 's ....
View 9 Replies View RelatedNamed Range Name In Cell For Use In Formula
Aug 31, 2007I want to be able to do is to have a text value in a cell which will be the same as a named range and can be called from a formula in another cell. For example, I have three named ranges: JAN, FEB and MAR. Instead of having a formula which might read: =VLOOKUP("bill", JAN, 1, 1)
I would like to have in cell A1 the text value "JAN" so that the formula can read:
=VLOOKUP("bill", A1, 1, 1)
Then I can change which named range is used in the formula but changing the value in cell A1. When I try to do this, the formula just looks up the value as if cell A1 was the range rather than taking the value from A1 as the named range.
Set Variable To Named Range Or Single Cell
Nov 30, 2008The problem exists with the lists I use. I have a "settings" sheet, where users can choose from preset values to run in the program. E.g. "Urgent", "Semi Urgent" and "Non Urgent" (there are a lot more values, but those will do for now." and the idea is to run them 1 at a time.
However, I've now determined that 99% of the time, they're going to be run 1 after another, that is to say run the program once for "Urgent", then again for "Semi Urgent" and then again for "Non Urgent". So I'd like to loop through these. Again, not a problem, you'd think.
So I added a new value to the list; "All" which users can select to invoke a list. Again, not a problem, I already have the list as a named range, "DmgList" and I can cycle through it. I ran the following test code to see if it would work in theory...