I'm trying to figure out why i'm getting this error: "Object variable or With block variable not set" for this
Sub Macro3()
Dim cel As Range
Dim str1 As String
Dim SearchThing As Range
Set SearchThing = ActiveSheet.Range("I34")
str1 = Left(SearchThing.Value, Len(SearchThing) - 4)
cel.Value = str1
End Sub
The error is specifically with this line
cel.Value = str1....................
I have the following formula which doesn't work:
=COUNTIF(LEFT(proposedenter,7),LEFT(F127,7))
proposedenter is just a named range. I can see this is wrong but how do I base the count criteria on the left 7 characters of an item that is matched in the range?
I am looking to write a formula in an excell cell to veiw some of the wording in another cell. I know how to say that i want to see the first or last "x" characters in a cell.. But how do i say that i want to see all the info/wording in a cell except the last "x" characters..
View 4 Replies View RelatedI can do this in Excel, but I don't seem to have a single example to hand of how, using VBA, to extract all characters up to but not including, the first space character in a cell.
View 9 Replies View RelatedI have a series of alpha numerics items in Cells A1:A999 (i.e AB0001 to AB0999). I need to be able to perform a search the range (A1:A999), and extract items that do not conform to the standard AB prefix. Example, an item of BC0001 could be present in the range. I would need to have that item, either highlighted or displayed in a different column.
View 2 Replies View RelatedI need a formula, that will, Show the Characters Left of Delimiter (,).
for example:
CABLE, UD SECONDARY #4 DPLX AL
result:
CABLE
I need VBA coding that starts in a cell, moves 5 columns to the left, and then copies the left 8 characters of the string. The Macro should end there, but I'm hoping to be able to then paste those 8 characters elsewhere, say a different programme or web page.
I can move the cell no problem:
ActiveCell.Offset(0, -5).Select
But how to then copy those left 8 characters so it stays in the clipboard at the end of the macro?
The formula needs to be non-cell specific, i.e. I need to use the above selection and NOT a cell name such as A5 etc.
I am trying to write a function that finds and breaks a cell about the first space.
Worksheet is:
=LEFT(name,FIND(" ",name)-1)
Have tried...
Function Firstname(name)
Dim Space As Integer
Set Space = .Find(" ", name)
Firstname = Left(name, Space)
End Function
and also...
Function Firstname(name)
firstname = left(name,find(" ",name)-1))
End Function
I am attempting to utilize the Mid, Left, and Right functions to parse out data returned in a single cell. There are twelve months of data returned with the "title" listed after. I would like to be able to FIND the title and return a specific number of characters of data to the LEFT not the right (as Mid seems to do).
EX.
Cell A1{ 1 2 4 5 3 5 TITLE1 1 2 3 6 7 4 5 TITLE2 3 4 5 2 4 5 TITLE 4 }
Cell A2{ 1 2 4 5 3 5 TITLE2 1 2 3 6 7 4 5 TITLE3 3 4 5 2 4 5 TITLE 4 }
I would like to be able to search each cell for the "TitleX" then parse data out to the left of that title (and if not found, return "").
There are too many different Titles to use IF statements and I cannot change that the data comes to the left of the title.
I want to take a lot of text fields with alphanumeric characters ie. " '49560-960-A908 "
(always beginning with the character " ' ") and display in another cell position 2 thur 6 ie. "49560"
I have a file that contains 3,500 cells with alphanumeric characters...always beginning with ' but I need the 1st 5 numbers after the ' in a second separate column
I am using (in Column "B") the formula: =IF(A2=A3."",1), copied down as required, to uniquely identify entries in Column "A". In this instance "10", "10A", "10B" and "10C" located in "A5" through "A11" are viewed as the same. Is it possible to have the formula recognize the enties in "A5:A11" as a unique entry and therfore have "1" entered into cell "B11"? The suffix, if used will always be A thorugh Z.
View 9 Replies View RelatedI've got a long list of account numbers of varying length and ultimately need to add a dash and a dot into these numbers. Here's an example
12345678 to> 1-2345.678
123456789 to> 12-3456.789
1234567890 to> 123-4567.890
The standard format is always 3 numbers after the . and 4 numbers between the - and .
I can get to this by doing a series of functions starting with this:
=LEFT(A1,LEN(A1)-3)&"."&RIGHT(A1,3) to get 12345.678 or 123456.789
copy/pasting that value into another field and then doing this
=LEFT(E1,LEN(E1)-8)&"-"&RIGHT(E1,8) to get the results above
I can't quite figure out the format to combine the multiple steps/functions into one so that I'm not copy/pasting values and re-doing the function.
I have a named range call "Options".
How do I find the top left cell of the range using a formula? Note: I do not want to use VBA if I don't have to.
if a user has selected a range, how do you, in VBA, identify the:
1. Top left cell
2. Bottom left cell
3. Top right cell
4. Bottom right cell
For example if user has selected the range B5:M30, then we would want to identify in the macro:
1. Top left cell = B5
2. Bottom left cell = B30
3. Top right cell = M5
4. Bottom right cell = M30
I am trying to find a code that will simply find the last cell in Column A of a named Range (titled: ConditionlFormatArea)?
Also IF I could get a line(s) of code that would just find the last cell in Column A of the Used Area.
I ask for both because I am not yet certain which line of code will work best for me.
When I have that cell located I need to Remove the Conditional Formatting. I think I can get the code for that part.
Is there any easy way to identify the bottom left cell in a named range?
View 6 Replies View RelatedI have a 2010 excel sheet containing 14 columns and 45082 rows in total. I am quite illiterate when it comes to writing macros but I know that what I need can be achieved with a set of codes.
To be more clear, I inserted two tables below. The first one represents the current data structure, and the second one is the way I want my data to look like.
Current data structure looks like
Variable 1
Variable 2
Variable 3
[Code].....
I have a range selected (A4:C15).I would like to deselect the range and make A4 the active cell. Is this possible without a macro?
With a macro, one could use:
Application.Goto Selection.Cells(1)
I generally select a large number of cells and would like to go back to the start cell in the range. I could do it by pressing the left and right arrow keys but is there a shortcut that will allow me to do the same?
I need to do a sumif range A:A does not contain 484- as the first four characters of the cell. The 484- is not the only part of the cell containing that text. How would I do this? Ex:
A
16-1700.049820-F704264.59484-0068400F704264.59484-0101928264.5916-525129.00
=Sumif(A:A,Does not begin with 484-,B:B)
I have a column that is giving unwanted value . dont know the reason as that excel file has been created by some other guy and I just started working on it .
My Question is how to move to 2 cells left(A for example) from from that unwanted value column. and check if
A is equal to cell above it , means B Cell(Row above A but same column).
As my excel file is totally based on Forms, Macros, I am not quite familiar with macros.
Is there any way to put if condition in one cell (column) and drag it all the way down which should work for all the values in these 3 column.
And also if A=B then I want to make that unwanted value cell="".
Here is my spreadsheet
A B C D 1 Matt 5 4 75 2 Joe 25 23 66 3 Ron 31 33 82 4 Jim 22 45 91 5 Steve 99 100 11
I used the large function to find the top 5 greatest numbers. I have them ranked in another area below the first set of numbers.
100
99
91
82
75
I need to find some sort of formula to return the name for the appropriate number. For example, I need the cell immediately to the right of 100 to return Steve; 99 to say Steve; 91 to say Jim. The INDEX/MATCH formulas used for left lookups works only for a column. I would have to set the index/match formula individually for each column to the right of the top 5 numbers, and that defeats the purpose. I might as well just find the numbers and connect the names all by hand.
Each row contains a series of values which are not sequential.
For each row I want a formula which gives me the location (i.e. column 10) within that range of the first negative value, searching from left to right.
I have a spreadsheet which is going to be populated everyday from figures from another spreadsheet using autofilters and the very useful SubTotal worksheet function. I'll attach a copy of the work in progress, also there will be a macro in here which Everytime the user presses update, it copies a range of cells and formatting and pastes it to the next available cell on the right. I've also drawn the movement of the cells i'd like The reason being, is that its going to give day to day, up to date figures from a datasheet.
The problem i have is that when i come to populate the grid which has been copied, i need a calculations to populate each cell in the Less<1week column, then when it gets to the bottom, move Back to the top, and accross to the right 1, and then populate down again, and so on until the end of the grid in question, i dont think i can use a for/next loop becuase it will be a different column address everytime. I dont really like loops, but i feel this needs it.
I am trying to SUM the total task done per date. The problem is, (for the sake of this problem) the DATE is in Column B and the Task Total is in Column A. I know that SUMIF is not possible because the SUM RANGE should be always on the right side of the CRITERIA.
My question is, is there other formula other than SUM IF to figure this out? or I have no choice but to Interchange the data in a matter that SUMIF function will run.
I am having trouble filling a formulae series to the left on one spreadsheet, the fomulae being references to another sheet.
For example, I have two sheets 'Mtce Options' and 'Base Case'. In 'Mtce Options' I have the following formulae
A B C
1='Base Case'!A15='Base Case'!D15='Base Case'!G15
I want to fill to the left, incrementing the column references by a factor of 2 each time, eg. next two should be ='Base Case'!J15 and ='Base Case'!M15.
However, if I autofill to the left by highlighting A1, B1 and C1 or just B1 and C1 all I get is an inappropriate reference such as ='Base Case'!D15 or ='Base Case'!F15, respectively, in D15.
i have a range of cells which is nxn where n>1. i want to place a header 2 rows above this range which is aligned on the left. this is what i tried:
View 3 Replies View RelatedI need a cell formula that will (a) identify the highest N values in an above specified column range, (b) color the interior of those N cells (I suspect that this is not possible), and most importantly (c) return the average value of N corresponding cells, where the corresponding cells are located on the same rows as the identified N high value cells but in a specified column to the left (not necessarily adjacent)
Does anybody know what this formula would look like?
Example:
-----------------------
...| A | B | C | D | E | F |
-------------------------
1 |....| * |.........| 7 |...
-------------------------
2 |....................| 2 |...
-------------------------
3 |....| * |.........| 6 |...
-------------------------
4 |....................| 1 |...
-------------------------
5 |....| * |.........| 5 |...
-------------------------
6 |....................| ? |...
-------------------------
? = average of B1,B3,B5 where (N = 3) and (specified column to the left = B)
So we have people's names in a table. First name in one column and last name in another column. We have a 3rd column where we can use 8 characters to do a combination of First 5 of Last Name + first 3 of first name. However, if someone's last name is only 3 or 4 characters, we'd then want to take more from the first name to fill out the 8 characters.
So:
Charles Johnson -> Johnscha
John Smith -> Smithjoh
Willian Wu -> Wuwillia
What's the best way to do that without creating some crazy formula with tons of if/thens?
I'm trying to do a quick find and replace across a range of cells to remove Chr(10) and Chr(13) characters. For some strange reason, some of the cells are being good and duly allow the removal of said characters and some are not - they stubbornly refuse to remove with no error message. The ones that are not allow removal if I copy the individual cell to a new sheet.
Sub removeCharNew()
'Dim x As Integer
Cells(1, 1).Select
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlDown)).Select
Cells.Replace Chr(10), ""
Cells.Replace Chr(13), ""
End Sub
i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows
View 3 Replies View Related