I have a range selected (A4:C15).I would like to deselect the range and make A4 the active cell. Is this possible without a macro?
With a macro, one could use:
Application.Goto Selection.Cells(1)
I generally select a large number of cells and would like to go back to the start cell in the range. I could do it by pressing the left and right arrow keys but is there a shortcut that will allow me to do the same?
I have a 2010 excel sheet containing 14 columns and 45082 rows in total. I am quite illiterate when it comes to writing macros but I know that what I need can be achieved with a set of codes.
To be more clear, I inserted two tables below. The first one represents the current data structure, and the second one is the way I want my data to look like.
Current data structure looks like
Variable 1
Variable 2
Variable 3
[Code].....
Using Excel 2007. Is there a straightforward way to do a waterfall chart?
eg. stacked bars running from left to right.
First Column = 2011 Headcount
2nd Column = stacked bar with additions (by category) - stepping up from the 2011 total.
3rd Column = stacked bar with reductions (by category) - steppind down from the first column + 2nd colum total.
4th column = 2011 exit (which will be at the same height as the bottom of the 3rd column).
Using Excel 2007.
I have shapes in 3 different rnages of cells on a cell worksheet:
R1 = $D$5:$D & lngRows (row=32)
R2 = $G$5:$G & lngRows (row = 51)
R3 = $M$5:$M & lngRows (row = 50)
I need to set the properties of the shapes in each range differently The shapes in R1 are Left + 46 But the shapes in the other 2 ranges need to be just left My problem is in this bit
Code:
'Set properties for each shape in ShapeRange
For Each sh In ws.Shapes
I need to be able to set properties for each range separately instead of the entire sheet. Full code below (only Range $D at the moment - works)
Code:
Option Explicit
Sub AddShape3()
'Purpose: Add small rectangles to database table/fields for
' brainstorming and documenting relationships and queries
'
'Resources:
[Code]....
I am using Excel 2007.
Sheet 1 - I have columns filled with dates (weekdays only) For example 28-May, 29-May, 30-May up to 28-Nov. Above 10 rows below each date columns and each cell has some values.
28-May29-May30-May
0.50.50.5
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0
Sheet 2 - I have Start date defined in B1 Cell, and End date defined in B2 Cell
I need defining the formula to sum all the cell values fall between the date range defined in Sheet 2 B1 and B2.
For Example if B1=28-May B2=30-May, I want the sum of all the numbers come under the range of 28-May to 30-May, with this above example, it should be 19.5.
I'm new to Excel 2007... whilst I'm managing to find most things I'm used to using in 2003, I have an issue in one workbook that I can't figure out.
When I click in some single cells (not all), that cell and several below it automatically highlight as a range... left-clicking initially highlights the cell, but as you release the mouse button, the others below it also highlight.
I'm using excel 2007, here's what I need.
I want to count the number of cells in a range that have text in them (any text at all) but not count them if they have numbers in them or are blank. How would this formula be written?
Column A & B has a list of Supplier Part numbers and Buyer Part numbers as below.
Supplier P/N
Buyer P/N
HGFYE/12
111111
HYEYDH/14
222222
[Code] ..........
Cell D2 is an open cell that any data can be entered into as a search term. What I am trying to do is search for a Supplier P/N that have the characters "H", "G" or "E" in it, so entering "HGE" into cell D2 would display the results into columns F & G as below.
Supplier P/N
Buyer P/N
HGFYE/12
111111
HDGTEY/56
333333
I can easily do a formula for 1 character or a string of characters.
To complicate it further, if the search term has in this example has "YFF", I would like the same formula/code to workout that the result in F & G should show this time
Supplier P/N
Buyer P/N
YHDHFF/58
555555
I am using Windows 7 and Excel 2007.
I have searched and trying to manipulate various formulas with no success...
I am entering an AverageIF formula into cell J15
I want to calculate the average of the folllowing ranges cells J5:J8,J10:J13
However, I want the cell J15 to display blank if cell J14=0
On reflection I am unsure an AverageIF formula is even correct.
How to change the background cell color based on value ranges(s)
I tried conditional formatting but it works between two values only, in my assignment I want to show:
River levels in relation to flood class
>=2m =2.6 =3m major flood (background turns red)
I hope it is possible in Office 2007
I'm creating a configuration tool for instrumentation that has several options. Many of these options are dependent on one another. To summarize, I need to:
*Conditionally lock cells (and populate with "N/A") OR allow selection from drop down list - the list exists, it's the locking and auto-population I'm struggling with
Example: If A1 = No, then B1 = "N/A" and is locked, else allow selection from drop down list in B1
How I can deselect the selected cells before ending the macro. Ihave a workbook containing about 40 sheets, and need to clear the same cells on 31 of them. I have attempted to define a name for the range, and actually got it to work once, however it ceased working on the second attempt, and I don’t know why. I have therefore gone back to the original code as posted below.
My questions are a) how can I deselect all the cells and b ) how can I use a defined name for the range so that I can use something like clear contents and not have to select the cells?
(I have also cleared all unlocked cells previously, but I have some unlocked cells in the other sheets I do not wish to clear).
Subnewmonth()
' newmonthMacro
IfMsgBox("This deletes all data, do you wish to continue?", vbYesNo) = vbNo Then Exit Sub
Sheets(Array("1","2", "3", "4", "5", "6","7", "8", "9", "10", "11","12", "13", "14", "15", _
"16", "17","18", "19", "20", "21", "22","23", "24", "25")).Select
Sheets("1").Activate
Sheets(Array("26","27", "28", "29", "30","31")).Select Replace:=False
[Code] ..........
How do i deselect grid-lines in Excel 2003 so as the sheet is clear.
View 6 Replies View RelatedI have a spreadsheet which is going to be populated everyday from figures from another spreadsheet using autofilters and the very useful SubTotal worksheet function. I'll attach a copy of the work in progress, also there will be a macro in here which Everytime the user presses update, it copies a range of cells and formatting and pastes it to the next available cell on the right. I've also drawn the movement of the cells i'd like The reason being, is that its going to give day to day, up to date figures from a datasheet.
The problem i have is that when i come to populate the grid which has been copied, i need a calculations to populate each cell in the Less<1week column, then when it gets to the bottom, move Back to the top, and accross to the right 1, and then populate down again, and so on until the end of the grid in question, i dont think i can use a for/next loop becuase it will be a different column address everytime. I dont really like loops, but i feel this needs it.
I'm using Excel 2007. I would prefer to stay away from the scripting side of the house if possible. This is basically a 3 day forcast weather chart. The top is the actual weather data, the bottom portion is a color coded reflection of how the weather affects various things.
This product is created in excel, but will be embedded into a powerpoint. It will be updated daily. Here is what I would like. I want the color chart at the bottom to update automatically based on the data I enter above. I have a grasp that I can update the color through conditional formatting, although im not exactly sure what that will look like with all of those cells.
I also figured out that I can insert the letters in those lower cells with something similar to " =IF(C6>90, "T", "") " which would put in a 'T' for Temperature when the temperature got above a certain degree.
I run into a problem when I have multiple factors affecting a single cell. For instance on the example in day 2 of my image. Personnel are affected by Temperate AND UV Index. How would I set up that cell to pull that information from both of those cells and display it accordingly? I would prefer the letters to stay separated by the comma, but I could live without that. The default cell color will be green, with the potential to be yellow or red. I left a few examples of possible situations on day 2 and 3.
I need a cell formula that will (a) identify the highest N values in an above specified column range, (b) color the interior of those N cells (I suspect that this is not possible), and most importantly (c) return the average value of N corresponding cells, where the corresponding cells are located on the same rows as the identified N high value cells but in a specified column to the left (not necessarily adjacent)
Does anybody know what this formula would look like?
Example:
-----------------------
...| A | B | C | D | E | F |
-------------------------
1 |....| * |.........| 7 |...
-------------------------
2 |....................| 2 |...
-------------------------
3 |....| * |.........| 6 |...
-------------------------
4 |....................| 1 |...
-------------------------
5 |....| * |.........| 5 |...
-------------------------
6 |....................| ? |...
-------------------------
? = average of B1,B3,B5 where (N = 3) and (specified column to the left = B)
I have a named range call "Options".
How do I find the top left cell of the range using a formula? Note: I do not want to use VBA if I don't have to.
I'm trying to figure out why i'm getting this error: "Object variable or With block variable not set" for this
Sub Macro3()
Dim cel As Range
Dim str1 As String
Dim SearchThing As Range
Set SearchThing = ActiveSheet.Range("I34")
str1 = Left(SearchThing.Value, Len(SearchThing) - 4)
cel.Value = str1
End Sub
The error is specifically with this line
cel.Value = str1....................
if a user has selected a range, how do you, in VBA, identify the:
1. Top left cell
2. Bottom left cell
3. Top right cell
4. Bottom right cell
For example if user has selected the range B5:M30, then we would want to identify in the macro:
1. Top left cell = B5
2. Bottom left cell = B30
3. Top right cell = M5
4. Bottom right cell = M30
I am trying to find a code that will simply find the last cell in Column A of a named Range (titled: ConditionlFormatArea)?
Also IF I could get a line(s) of code that would just find the last cell in Column A of the Used Area.
I ask for both because I am not yet certain which line of code will work best for me.
When I have that cell located I need to Remove the Conditional Formatting. I think I can get the code for that part.
Is there any easy way to identify the bottom left cell in a named range?
View 6 Replies View RelatedMy question requires me to do a Vlookup question that needs to get the information in the next two cells over from the left most cell. In short I need to put info from two different cells from the same row and look up value into one cell.
View 2 Replies View RelatedI have a macro that activates a cell on row 30. The active cell could be either E30, F30, G30 ... etc.
I need a macro that sums all values from cell D30 to (and included) the active cell and returns this value to cell B1.
In my column B, I have different words like Balance, Notes, Expense, etc. Is there anyway I can look into column B, and if I get the word Expense, then take the number directly to the right of it (from column C) and SUM it? Not sure if it matters, but let's say I want to put it in cell C2. I figure this will allow me to do this like insert, delete rows in the future, but my equation in cell C2 will still add up what I need.
View 2 Replies View RelatedI have a column of cells with Customer info and address in each row, that I need to move into multiple columns. ie Cust name, acct #,address, city,state, zip the problem is ALL of the info for each customer is in ONE cell.To be clear, cell B1 has complete name address etc for one customer, B2 has the info for another, B3... on and on. To complicate matters as in the example, there is not a pattern in the lines. the first example shows the info beginning on the 2nd line of the cell, but the 2nd example shows info in the first line. I have tried the text to column fixed width. Didn't work because names and addresses are of varying lengths. Then I tried delimited, but there isn't a common separation between different data. I am using excel 2007. FYI I did go through many many threads and found some that were close to my problem but not close enough to work.
"
JOES TOWING SERVICE [0123451]
123 STREET
CALEDONIA FL 12345
"
"BUBBA / SHOP
ACCURATE AUTO SUPPLY INC [0234567]
21234 HYDRAULIC DR
LOCKWOOD OR 45678
"
I have an excel spread sheet and on the last column on the right hand side I have some comment boxes but when I hover over them they pop up to the right of the cell, and then they are off the screen.
Can I alter it to make the comment box pop up to the left side of the cell.
[Code] ....
Is it possible to adapt this code to get me the desired results or will it have to be a separate one.
Also i'm not sure if I have the code right because if I run the macro then open a comment box in the (M) column as in the code the comment box is the default size then if I run the macro again once I have the little red tick in the corner of the it changes to what the code says.
Working in Excel 2007. I am using excel for a data log (basically) and want it to format all empty cells in a row yellow if there is data in column A
Basically, If i have a value in A2, I want any empty cell between B2-G2 to be filled in yellow (as an idicator to the inputter that the cell needs to be completed).
there is already conditional formatting on these cells, which i want to maintain for the non-empty cells. I also have "0" as a value, so I couldn't use the basic conditional formatting setting it =0, it highlighted cells with $0.00, which i do not want.
I am trying to get two cells to be used to adjust other cells on the same sheet repeated times.
In a inventory sheet I have 5 columns as such , A1 previous balance, B1 Qty received, C1 qty on hand, D1 last cost, E1 current avg cost What I want, is to be able to enter my weekly received items in the B1 Qty received and the new cost in D1 Last cost cells and have them calculate my current average E1 and update my qty on hand C1 total. This in itself is not the biggest challenge. I was asking if there is a way that after the E1 current average cost and C1 qty on hand are updated by that formula, that the next time I enter a new B1 qty received and new cost in D1 Last cost cell they will update again basically without changing the earlier calculations achieved .
Example: Today I have item X with a A1 previous balance of 10 , with a D1 last cost of $1, and E1 current avg cost $1
I want to receive B1 10 more today at $.50 D1 last cost, which ideally would end up showing
A1 previous 10 (or 20 if adding) , C1 Qty on hand 20, D1 Last cost .5, E1 current avg $.75
Next week I want to receive B1 10 more at $.25 D1 last cost , which then would update showing
A1 previous balance 10 (or 30 if adding), Qty on hand 30, Last cost $.25 and E1 current avg $.58
I have two sheets with data. I wont excel to look for a value in colum A in sheet 2 the value to look for is defined in colum a in shet 1. If value is found it should insert in sheet one the value that is in the cell next to the found value. The data is not sorted. I have attempted and failed with using different functions.
View 1 Replies View RelatedI am using Excel 2007, and here is my scenario. I have a spreadsheet with a different sheet for each month of the year. I want certain cells in a month's sheet to mirror or be equal to the same cell in the previous sheet so that if I change the value of a cell in April, the same cell will automatically be changed in May.
An example is that I have a cell with the value of "Comcast". If I want to change that value in April to "Directv", I want it to automatically change in May, too.
Now I know that I can individually program a cell to be equal to a cell in another sheet and it will do exactly what I want. The problem is that I have about 60 cells in each sheet that I want to mirror the same cells in the previous sheet, and I don't want the entire sheet to mirror the previous one. So with 11 months/sheets with cells mirroring the previous sheet, individually programming 660 cells and switching between sheets to do that would take a very long time.
So my question is this. Is there any way to select multiple cells and have them all mirror the same cells on a different sheet without my having to program each cell individually?