I've got a Userform with hundreds of lines of code and I'm getting Run Time Error 424, Object Required when I try to show it - the problem is that it doesn't take me to the line that fails - is there a way I can identify the problem?
View 5 Replies
Creating a macro that will identify the last blank line in column J and insert a line in it? The macro will need to look from the "bottom" as there is blanks cells above the last line.
View 5 Replies View RelatedI have the data to import / read in a pdf, in a doc, or in an Excel worksheet whichever is easier to use. I need to import the data, parse it into the correct cells for that row and then repeat the import until the end of the file. Not all the cells are in each group of data to import, so those cells will be null for that row. Some of the data for one cell may be in up to 14 lines in the data file. I have be concatenating these data rows into one cell. There are 48,000 lines in the file to import or I would do this manually. I am assuming that doing this in VBA would be the most efficient method.
View 11 Replies View RelatedOur small family business has a mailing campaign that we track with excel. However, we're very concerned about users opening the macro-filled master spreadsheet. Instead, we'd like a macro to do everything for them.
When a letter comes back in the mail with a bad address, the user types the Street number and street name such as "1234 Main St" into $A2 of c:dropbox eturned.xlsm, presses the macro button, and it should do the following:
Opens and Searches "Sheet1", "column S", in the file c:dropboxmaster1.xlsm, and finds the LAST instance of the address typed.Selects that entire rowCopies the entire row.Pastes the contents into the row of the active cell in the destination spreadsheet, overwriting what was there before. Such as $2:$2 if the address was typed in $A2.In the master1.xlsm spreadsheet, sets the entire copied row color to "gray".closes master1.xlsm and saves changes.
The end result is that the user now has an identical row of information in their spreadsheet, and the master spreadsheet's row is colored gray indicating it has been completed.
Other notes:I'm open to more efficient steps than this if you have them.There are approx 5,000 records to search through in master1.xlsx at any given time.
I have about 180 workbooks which I need to compile into a Master Schedule.
All the tab 1's are different, these feed into tab 2, which the data has the same formatting throughout. The 2nd tab has the same data for A:F 1 but cells A:2 - F:2 down to row 9 are populated from tab 1, therefore different in each. I am trying to get a Master schedule that lifts the data in the fed cells into a line by line spreadsheet?
Is there a way I can get excel to look at a folder, then every workbook in it, the at the 2nd tab in every workbook, then list the cells as described above? I am not after a consolidation of this data, but a full list?
I'm trying to combine 2 cells that both have text on multiple lines separated by line breaks. I want to keep the formatting so that when both cells are combined, line one from cell 1 and line 1 from cell 2 are on the same line in the new combined cell. This is easy to do when there is only 1 line in each cell but how do you do this for cells with multiple lines? Here is an example of what I am trying to do:
A
B
C
1
First Name:
Last Name:
Address:
John
Smith
123 Harold Street
First Name: John
Last Name: Smith
Address: 123 Harold Street
I need to read or clear all the line in specific range which will be increasing dynamically. Problem is "Selected File List" table range is not specified. New file chosen with browse will be added to "Selected File List" dynamically. Number of file can't be predicted.
vbaStk.JPG
What I've tried so far is, keep track of the browse button click and add the file path to arraylist. After that, (Row number 9 which is start line + arraylist size) to get the number of line of end of the table. But due to some requirement, I want to read the file from excel file. Something like -Read until found blank line or border bottom or something.
I'm new to VBA and I'm not so sure what I'm doing with vba codes
I have this function that works on line 3 and if the conditions are met, the result is 1
=SUMPRODUCT(--(IfColor(B3,$A$76)*(SUMPRODUCT(--(D3D4)))))
Here how it works, if B3 is the same color as the reference cell $A$76 and D3 is different than D4 then the result is 1
I would like this function to work from line 3 to line 60 and return the total of lines where the conditions are met. I'm thinking of a =COUNTIF function but can't get something to work. If there is a simpler way, it's even better. The IfColor is a function I wrote in VBA,
I need the Service Order tab to populate with data from the CPR tab based on the IO#. Since there is more than 1 occurrence of an IO# I need a formula to list the 1st, 2nd, 3rd, etc result of the vlookup in the cell under the 1st.
=VLOOKUP($E$2,CPR!$L$4:$AA$12,2,FALSE),
When I drag this down I get the 1st occurrence of the IO# 777 I need all of them.
B C D
Atex ID#(unique id) Campaign name Site
Row 7 1st occurrence of IO# 777
Row 8 2nd occurrence of IO# 777
Row 9 3rd occurrence of IO# 777
I have a worksheet that I need to be able to easily copy and paste the formula/formatting from the row above, but not the Values entered, (if any). I am using columns A to DG.
I just really need to be able to copy all the formula in these cells down - nothing exciting or fancy.
I've tried formatting as a table as per some searches and that was difficult! My column headings changed, and when I inserted a row, two of the formula's wouldn't copy down - plus the shading and borders went wonky in places.
Currently I am using Excel 2000. I did a search and couldn't seem to find the answer I was looking for. Hopefully someone can help. It would be greatly appreciated since I have been trying to figure out how to do this for days.
I am trying to create a worksheet that will pull info from a row on one sheet to another sheet based on the name; then continue to list the info on each line afterward until there is no more of the that particular criteria. See below (this is just an example to simplify the data but would need the same process):
This would be the data on sheet 1:
Name Bonus Commision
Tom $45 $50
Mary $25 $75
Mary $30 $80
Tom $60 $50
Tom $90 $25
What I would like to do is have 2 more sheets. One would be Tom's sheet and the other would be Mary's sheet and it would look like this:
Tom's Sheet:
Tom $45 $50
Tom $60 $50
Tom $90 $25
Mary's Sheet:
Mary $25 $75
Mary $30 $80
I am not completely familiar with all of the functions in Excel and compared to you guys I am a complete novice.
Is this possible to do in Excel without using a macro?
i hv following code
(i use generate macro)
my question is how to arrange the code from one line to multiple like :-
following code show in excel macro environment is one striaght line.
' Create new var on yr , and replace 2006 to CY06.
ActiveCell.FormulaR1C1 = _
I've attached a model with my problem highlighted in COLUMN S of the REPORT tab. The model is an example of what the output should be, but if you run "Full Report" (Command Click 1) you'll see that when the VBA code gets to the penetration operation, it fails to paste the value. The identical code works perfectly in the "Subs Report" (Command Click 2). This is the code in question as part of a for loop:
View 2 Replies View Relatedif i run my macro that saves a sheet as a certain name and then prints it, it works, but if i run my macro and the file already exists it asks me to overwrite it. If i select yes it prints it and carrys on with the rest of the macro, (good). If i select no the macro fails. How can i get it so if i hit no, it runs the rest of the macro after the print command?
View 2 Replies View RelatedHaven't done a LOT with forms, but this should work (in my mind) and doesn't.
I'm using a ComboBox linked to a named range of "DATES" for a user to select a date. All I want to do is find that date in column A of the Sheet1.
The code below will enable you to browse for a picture and insert it at cell location O9. It works great in excel '03 but when sub is ran in '07 it places the picture at about cell D5 and not really even lined up perfectly with that cell. Does any one have any idea why this is happening and how to make the sub work correctly in '07?
View 6 Replies View RelatedI have a TextBox on a multipage on a userform. When used, entries are trapped by
Private Sub tbxCrew_Change()
Call OnlyNumbers
The code then successfully shifts to the following
Private Sub OnlyNumbers()
If TypeName(Me.ActiveControl) = "TextBox" Then
At this point, it decides that TypeName(Me.ActiveControl) = "MultiPage", not "TextBox" and skips over to End Sub allowing me to enter both text and numbers in the TextBox.
I am having issues with a Select Case failing at the end. Here is the code:
Code:
Public jan As Double
Public feb As Double
Public mar As Double
Public apr As Double
Public may As Double
Public jun As Double
[Code] ........
I have bolded the font on where it fails. If I delete the bolded lines the code runs perfect.
Before upgrade to Microsoft 2007 this code worked well (for 3 years). I marked it well with big space & comment where it gets hung up. The line says: With Application.Filesearch. All is well up to that point. I have another program that seems to have a problem when it comes to "With Application" as well. It must have to do with the upgrade, because my programs have been used daily, and it was right after the upgrade that it got buggy. All of the users were upgraded to Microsoft 2007 at the same time.
Sub Rpitracking()
'Collects data from records
Application.ScreenUpdating = False
Dim MyCandidate
Sheets("PI Tracking").Activate
Set Level = Range("I5:I100")
Sheets("PI Tracking").Range("J5:Z100").Select
Selection.ClearContents 'Clears info pulled from records
Sheets("PI Tracking").Range("5:100").Font.ColorIndex = 0 'Colors all rows black
Application.ScreenUpdating = False
Application.Calculation = xlCalculationAutomatic
Range("ID").Offset(1, 0).Select
Selection.QueryTable.Refresh BackgroundQuery:=False
'Application.Calculation = xlAutomatic
For Each Cell In Level
Cell.Select
If Cell.Value <> "" Then 'Checks to see if Application date us there
If Cells(Cell.Row, 9).Formula <> "" Then 'Checks to see if app date is there
MyCandidate = Cells(Cell.Row, 2) & " " & Cells(Cell.Row, 1)
I am trying to remove values in column D if the value in anyone of the rows in column D is zero, here is the macro, for some reason it only removes some of the zeros, if I run it multiple times it eventuelly removes all the zeros:
Sub Removezeros()
Dim rct As Long
Dim i As Long
rct = Application.WorksheetFunction. CountA( Range("d2", Range("d65536").End(xlUp)))
For i = 2 To rct
If Cells(i, 4).Value = 0 Then
Cells(i, 4).EntireRow.Delete
Else
End If
Next i
End Sub
I downloaded a file from Excel-Logic site called :finding_dupes.xls.I can open this file in Office XP & Office 2007,but cannot open it in Office 2003.It just opens it and then hangs.I am attaching this file.
View 7 Replies View RelatedI have a number of Macro's that work in excel, but when I assign them to a userform I've created they hang... They activate, but where the macro requires a cut/copy, filter etc of data in the worksheet the code Breaks and I have to debug. Very frustrating because they work fine in excel. Its just the introduction of the user form which is giving me trouble. Is there a way of turing off the userform, getting the macro to run, and then reopening the userform... I've tride Userform.hide... but it doesn't seem to work.
View 5 Replies View RelatedI have a spread sheet with product codes on and 5 different prices types but they have only pulled through 4 times so need to insert a 5th line for each product code
View 2 Replies View RelatedWith the attached spreadsheet i cannot workout how with the line graph not to continue the line if there is nothing in row 10 of the table.
for eaxmple if there is no value in cell M10, i would like the actual addtion line to stop at the last value on the graph that was in L10.
I have a multiple line texts I want to convert it in single line like for Example:
The following contents is to be converted in a single line
contents:
[aaaaaaaa] [bbbbbbb]......so on
[cccccccc] [ddddddd]......so on
[eeeeeeee] [fffffffffff]......so on
Result:
[aaaaaaaa] [bbbbbbb] [cccccccc] [ddddddd] [eeeeeeee] [fffffffffff]....so on
I have a spreadsheet where on a weekly basis data is copied in to various tabs. I then have a "formula" tab where I have a single line of formulas which look up the various data tabs and extract the results I want to show.
Currently each week, before I import the new data into the various tabs, I copy the last row in the "formula" tab and paste to the line below it. This contains all the working formulas. I then paste values only on the line that I copied, thus "locking in" the values it calculated with that weeks data. This means that each row then contains the results with that week's data, and this will grow week by week.
What I am looking for is a formula that automates this process. So let's say that row 30 is the final row of data on my formula tab, it contains the formulas I want to use. I would need a macros that does the following:
1. Looks up last row (row 30)
2. Copies last row (row 30)
3. Pastes to next empty row (row 31)
4. Pastes values only to second last row (row 30)
I'm not too great with writing macros, I've found plenty that can find the last row, but I can't get them to work to highlight that row.
I have a chart sheet with a line graph that contains two series: I want to change their thickness, but I am not able to format it with VBA.
View 6 Replies View RelatedI'm working with matrix in vba and i'm trying to put all values of a specific line in that matrix in a line in excel. For example:
Matrix =
1 2
3 4
and i want Range("B1:B2") = 3 | 4 (the second line of that matrix).
Is there any way of doing this without perfoming a loop?
[something like Range("B1:B2").value = 'range'(matrix(0,0) , matrix(0,1)) ]
I have a macro that sends a sheet via email when the engineer has completed it and clicks a button. I added a filter to some of the results to remove blank lines and now the macro will not work. The problem is that if I remove the filter so that the macro does work, I end up with blank lines again.
View 4 Replies View RelatedHow can I let the Sub carry on to next instruction if Macro1 fails?
Private Sub Workbook_Open()
Call Macro1
' If Macro1 Fails go to next macro
Call Macro2
'If Macro2 Fails go to next macro
Call Macro3
'If Macro2 Fails go to next macro
Call Macro4
End Sub
