I have a column of cells, of which certain values have the prefix "EmployeeID:". I'm trying to identify the cells containing the prefix by evaluating each cell using activecell.offset and value to no avail. I've also tried to use the selection. find, however the first instance of the prefix is continually selected, and does not move on. I'm assuming that I must use the findnext feature, however I'm not having much success.
View 2 RepliesSo I have a list of integers in col A that is a truncated list from col B. I want to select the units in col B that do not appear in col A. I tried this statement
=IF(A2=B2,A2,0)
Since both lists (A and B) are ordered from smallest to largest this only worked until a value that is not in ColA appears in ColB and then all the cells following = O.
I would like to write a macro to examine a range of cells, and over-write some of those cells with a zero.
I want to over write those cells with either a numerical constant, or a formula with only constants, e.g.
"12345" or "= 123+567-(2*5)"
I do NOT want to over write cells that contain links or any functions:
"=page3!a5" or "=sum(a1:b6"
I have a long list (>1000) of increasing temperatures in column A. I use an array formula, {=MAX(A3:A1029-A2:A1028)} to find the largest change between two successive values. What I need to do then is obtain the two values that give rise to that difference (for instance, they might be in A678 and A679). I can't figure out a formula for this.
I can manage it if I insert a "difference" column in B, and use:
=INDEX($A$2:$B$1029,MATCH(MAX($B$2:$B$1029),$B$2:$B$1029,0)-1,1)
=INDEX($A$2:$B$1029,MATCH(MAX($B$2:$B$1029),$B$2:$B$1029,0),1)
but I'd rather keep the number of columns to a minimum.
I have a list of 10k cells with Peoples names in various formats (Title,First name,initials,Surname etc and variations).
I am trying to identify the cells that have within the string the following : 'space','UpperCase Char','LowerCase Char','space' (eg Prof " Dc " Jones).
I need to then change the lowercase char to uppercase.
I have some data that has names but is not consistant i.e
Smith, John
Smith,John
I want a formula that says, if there is a space after the comma do nothing, otherwise insert a space between.
I have figured out the second part so my formula will look like
=if(some logic to identify a space after the comma ,"",already figured out this bit)
I am trying to develop an IF formula based on 2 variables;
1. The value in column Q = 4
2. The value in column AA is between -10% and 10%
When both are true, it should return a value of "YES" (or "NO" when untrue). I am having trouble with the range part. It could be that the range spans negative and positive integers, but I'm not sure. Here is what I've got at the present time:
=IF(AND(OR(Q2=4),OR(AA2<0.10)),"YES",IF(AND(OR(Q2=4),OR(AA2>-0.10)),"YES","NO"))
I have two tables,
one table (TABLE1) contains the name and a mile point a
the other table (TABLE2) contains name, mile point 1, mile point 2, and other data
I want to be able to pull data from TABLE2, based on TABLE1's name and MP. I want to be able to select data from TABLE2 whose name and mile point's fit with the data from
TABLE1
Line
MP A
SYS
100
8
?
TABLE2
SYS
Line
MP1
MP2
DATA
A
100
0
5
BOB
A
100
5
10
KON
B
100
10
15
B
I want to be able to replace the ? from table1 with the correct SYS from table2 based on the MP given
I started with something like: =if(and(name=name,mpa=>mp1,mpa=<mp2)),vlookup...
The problem is this doesn't work because im comparing one to many.
I've collected some data from a GPS logger regarding the speed of an athlete. I want to calculate how many sprints this particular athlete undertook during a training session.
Sprinting is defined as a speed of > 20 kph.
One sprint would be the attainment of one peak >20 kph before decreasing below 20 kph.
It's easy to identify the 3 peaks and thus sprints from the xy scatterplot in the attached file, but I'm struggling to find a way to calculate this.
I'm trying to identify duplicates with a return of "True" or "False". The attached workbook has column F for results (to read PI2 A if in column L, PI2 B if in column R or Both), but I want to query if everyone in column E is in column L or is in Column R and if so which one.
View 3 Replies View Relatedi have a spreadsheet that contains dates spread across different rows and columns. How can I identifying dates for this week and next week by colouring the cells?
example dates that fall within this week will be red, next week will be blue.
I want to sort a spreadsheet based on whether any of the numbers '1', '2' or '3' appear in a particular column.
There are 2 particular rows which I care if they have a '1', '2' or '3' in them, let's say row 17 and 18.
I want to create a formula say in row 20 which would tell me if there is a '1', '2' or '3' in the corresponding cells in EITHER (!) row 17 or 18.
An example to clarify:
Cell A17 = 1
Cell A18 = 2
Then Cell A20 would be = 1 because both A17 and A18 have a '1', '2' or '3' .
2nd example:
Cell C17 = 1
Cell C18 = 0
Then Cell C20 would be = 1 because C17 has a '1', '2' or '3' .
3rd example
Cell D17 = 6
Cell D18 = 12
Then Cell D20 would be = "" (Null - no value) because neither D17 nor D18 has a '1', '2' or '3' .
Note: I am looking just for the numbers '1', '2' or '3' not (!) numbers like 11, 12, 13, 21, 22, 23 etc...
In Sheet1, If I have Group IDs in Column A and values in Column B as below, is it possible to create a summary in Sheet2 where the MIN value for each group ID is returned?
Sheet 1
A B
1 1
1 4
1 5
2 9
2 3
2 7
3 5
3 2
3 6
Sheet 2
A B
1 1
2 3
3 2
Is there a way in Excel to identifying certain combinations of numbers? If tried every IF statement I know.
I have an Excel with two columns of numbers and I need to identify their combinations.
18
18
18
19
18
19
18
20
18
18
18
20
The combinations 18 and 18 would return a "LOW" message in the third column, the combination 18 and 19 would return a message "HIGH" etc.
I have a list of variables created by a user like this:
BAND ID START END
Band1 06:00 08:59
Band2 09:00 15:59
Band3 16:00 17:59
Band4 18:00 22:30
Band5 22:31 24:29
Band6 24:30 05:59
Seperately I have data from a third party like this:
DATE TIME VALUE
18/05/08 17:22 10
19/05/08 02:15 1
20/05/08 07:14 5
20/05/08 21:36 15
20/05/08 25:43 1
21/05/08 19:15 15
22/05/08 18:26 16
22/05/08 24:59 2
etc.
I need to be able to identify which BAND ID belongs to each TIME in the list so that I can sum the VALUE figures for each BAND ID (e.g. the first time given,17:22, would belong to Band 3). have tried using LOOKUP but I can't seem to get it to work. Additionally, I have a problem with the 30 hour clock. Would I have to stick to a 24 hour clock? This would mean that I would have to find each time from the list that was between 24:00 and 05:59 and allocate it to the previous day because it is important to keep the values that I ultimately derive in the right day of the week.
Our unique identifiers are from SF.com... they have created unique Account ID's.
Comp Name Unique ID
Company A - 5102AA
Company B - 5102Aa
The problem:
Excel does not recognize the capital A and the lowercase a as being different. I need to pull this data out and bounce data across tables for analytics.
The Question:
Is there any way I can get Excel to recognize 5102AA and 5102Aa as being DIFFERENT ID's?
I'm using a cells.find command to locate a value in a file. How do I return the current row number that I'm on following the command?
I'm guessing it is something along the lines of:
MyCurrentRow = ActiveCell.RowNumber
but I know that that is an invalid statement.
In column H I have a list of numbers seperated by a space, the number of lines can change. In column L I have a list of numbers which can change either expand or retract.
I would like to check each cell in column H and if any numbers are not listed in column L then it/they should be shown in column G.
Example1 H2 shows 6 11, therefore cell G2 should show 11.
Example 2 H6 shows 5 6 9 11 therefore G6 should show 9 11
Sheet1 HIJKL1Container ID26 11 135 8 11 245 7 11 355 7 565 6 9 11 675 6 9 Excel tables to the web >> Excel Jeanie HTML 4
I have a worksheet, where in C3:C100 (or even higher) i will have text strings. A lot of these will be repeated, and i want to pick out just one instance of each text string and display it in E3:E10 (or higher).
So, for example, if i had the following values in column C:One
Two
Two
One
One
Three
Seven
Two
Four
Seven
One
Three
I would want the following values in column E:One
Two
Three
Seven
Four
Here is the deal I have 4 columns. Each line gives you the following information:
The Id is the record number, Code_Name is a code for each Fox in the study, date and area is a sub area in a bigger grid. Basically I have an area divided by squares and every time a marked fox enters in one of my squares a new line in the data is created. What I won’t to know is if a fox when in my area of study will return to the same squares or not.
ID
CODE_NAME
Date
Area
Logical
116
SSS1
02-Jan-09
1A1
273
RRR1
02-Jan-09
2A2
2959
BBB1
02-Jan-09
1B1
2959
What I’m trying to achieve is a 5th column were ill get a logical value of TRUE or FALSE if, for each fox in the next available record a fox went back to the same square or not.
So if you check for the fox RRR1 I have 2 records one in 2 of January in area 1A1 and a second in 7 of January in the same area. For the Fox BBB1 you will see that she was always in different areas and for CCC1 she only came back to one square.
The problem is I have over 400 fox’s and 12000 records and I’m trying to get a way of doing it automatically.
When using the formula '= CELL("format",G3)' the result is ',2' for Euros, US and Canadian Dollars. As you can see in my spreadsheet this does not enable me to calculate sums (ie. Total Canadian Dollars) using the currency format. Is there something other than "format" that would get a more precise result that would differentiate between currencies?
View 7 Replies View RelatedI'm trying to set a range to a particular cell in Col D but I don't know the row number because this can vary depending on the amount of data entered. At present my code looks like this
Dim MyCount As Integer
Dim r1 As Range
'No of rows in Col D
MyCount = Range("A2:D2", Range("A2:D2").End(xlDown)).Rows.Count
Set r1 = Range(Cells(MyCount, 4))
The problem is with my line
Set r1 = Range(Cells(MyCount, 4))
Sheet 1, column A, has invoice numbers from 1 to whatever is needed for the month.
How can I get Sheeet 2 (the following month’s) to automatically start numbering from wherever Sheet 1 leaves off?
I am about to re write my vba project as I can see that I need to make it more robust. One of the main issues I have is that the source XML file is not controlled by me. The quality and content is consistent but sometimes the order of the columns is different. At the moment that totally throws out my macro as it relies on certain columns for certain functions.
Trying to nut out the best way to import an XML file, keep only the specific columns I want - by content not location so then all follow on formula's will work and reference the correct data.
I have one theory that I can't get going. I thought if using defined names based on column headers this would allow me to keep and sort the columns I want. I can't find any examples to support this. I have been looking at the advanced filter but most examples reference exact cells which isn't flexible and leaves open to wrong data being pulled. Since I can't control the source doc what can I do?
I realise there are a few threads on similar topics but I can't seem to get any of them to work for my scenario. I have two columns with a list of numbers in each. I'm after a function that will scan column A and identify any numbers that also appear in column B. If possible I would like it to then generate a list of these in say, column C.
View 2 Replies View RelatedI have a number of workers in one column and how many dvds they have sold for the week in another column. how would I automatically identify the worker from the worker list who has sold the most dvds in that week? is there a formula for this?
View 11 Replies View RelatedI have a cell with a long list of phrases all separated by commas.
So it would appear, chicken, beef, steak, soup, fish
I want to create a rule in a cell to identify if one of those phrases comes up - so if chicken comes up then a 1 would appear.
To make it interesting is it possible to grab two words from the cell, so grab the words chicken and beef from a mass of words in one cell and bring it across.
I have these cells which contain huge amount of text and preferences and I am looking to identify these entities on if they contain these words.
i am trying to both identify the start date and the end date of a series in excel.
if you will, picture a spreadsheet with two rows with data. the top row is comprised of dates in mm/dd/yy (end of month) format. the bottom line is percentages . . . a corresponding % for each date directly above. these percentages add to 100%. in two separate formulas, I would like to identify:
1. the date in which the first %>0 occurs (start date)
2. the date in which the cumulative addition of all months %'s equate to 100% or the date in which the last %>0 occurs (end date)
keep in mind many if not most of the %'s will be 0%.
I am looking for the easiest way to find duplicate Work Order numbers that exist in 2 separate Workbooks. EX. Workbook 1 Sheet one contains the numbers 1-100 in A1:A100
Workbook 2 Sheet one contains X amount of the numbers between 1-100 located.
somewhere in A:A. For arguments sake let's assume those numbers are 3,6,33,87,99.
What would the formula be to return the values that are in both of the workbooks?
I have a list of "GPC" or company identification numbers. And for every campaign being sent to the company it will have the same GPC of identification code. I want a formula that indicates if it is the first time mailing the company (as a result return nothing for column D ""), the second time mailing them, third, or fourth. So basically I need a formula to find the duplicate values and return whether it is the first, second, third, or fourth time that code appears in column A.
The current formula I have is a little off because it checks against the cell beforehand. I'm not sure how to modify the formula or what different forumla I need. Attached is an example. I am looking at column A and trying to return the data in D. You can also see the faulty formula I currently have in place.