Is there a way in Excel to identifying certain combinations of numbers? If tried every IF statement I know.
I have an Excel with two columns of numbers and I need to identify their combinations.
18
18
18
19
18
19
18
20
18
18
18
20
The combinations 18 and 18 would return a "LOW" message in the third column, the combination 18 and 19 would return a message "HIGH" etc.
I have 25 random numbers and I would like to get a possible 5 digit combinations of these numbers. Can anybody help me with the possible formula?
View 9 Replies View RelatedI want to sort a spreadsheet based on whether any of the numbers '1', '2' or '3' appear in a particular column.
There are 2 particular rows which I care if they have a '1', '2' or '3' in them, let's say row 17 and 18.
I want to create a formula say in row 20 which would tell me if there is a '1', '2' or '3' in the corresponding cells in EITHER (!) row 17 or 18.
An example to clarify:
Cell A17 = 1
Cell A18 = 2
Then Cell A20 would be = 1 because both A17 and A18 have a '1', '2' or '3' .
2nd example:
Cell C17 = 1
Cell C18 = 0
Then Cell C20 would be = 1 because C17 has a '1', '2' or '3' .
3rd example
Cell D17 = 6
Cell D18 = 12
Then Cell D20 would be = "" (Null - no value) because neither D17 nor D18 has a '1', '2' or '3' .
Note: I am looking just for the numbers '1', '2' or '3' not (!) numbers like 11, 12, 13, 21, 22, 23 etc...
I realise there are a few threads on similar topics but I can't seem to get any of them to work for my scenario. I have two columns with a list of numbers in each. I'm after a function that will scan column A and identify any numbers that also appear in column B. If possible I would like it to then generate a list of these in say, column C.
View 2 Replies View RelatedI have a few hundred word files that I'm porting tables from. I initially imported every table into excel and figured out which table numbers I needed the data from. I only needed certain rows/columns from certain tables.
The code I have works great....if all the word files were the exact same. However, it appears that when different people edited the word documents, for whatever reason, a handful out of the 300 had their tables switched. So in some cases I'm looking for table 5, other times it could be table 6.
My question: Is there a way to identify the tables by text they contain? for example, the table 5/table 6 comment above, in all cases That table has a header cell called "Equipment". Basically I need something like:
"If CurrentTable contains "Equipment" Then set tableNo = CurrentTable" but I'm not sure how to do that.
In the code below wdDoc is a specific word document. tableNo is the variable set to identify which table to import from. I end up pulling data from three different tables that I would need to search for, each with a specific header.
Code:
With wdDoc
tableNo = wdDoc.tables.Count
tableTot = wdDoc.tables.Count
If tableNo = 0 Then
MsgBox "This document contains no tables", _
vbExclamation, "Import Word Table"
[Code] ........
I have 2 columns I need to compare, in column A a list of ref numbers aprrox 62000 rows, with some duplicates. In column C a list of ref numbers 38000 rows again with some duplicates.
I need to be able to compare Column C to Column A. I need to identify the first instance of a ref number that matches from C to A so that I can delete it. The second instance of this ref number I would like keep. I have tried the following with no luck.
=if(countif($C$2:C38000,A2)>1,"Duplicate","Unique")
I have unit measures that are converted across four columns (FT, SQFT, SQM and SQY).
THere are three units in rows (BOX, Skid and Roll). I am trying to identify in a column labeled "Duplicate Volume" with a formula stating "YES" if there are duplicate numbers (volumes) in any of the four conversion columns listed above. I tried to attach an excel file here but the system will not accept it. Hopefully the diagram i make below will be enough to understand the concept:
Unit Name FT SQFT SQM SQY Duplicate?
BOX 0 0 15 0
BOX 0 0 20 20 YES
Skid 0 10 10 10 YES
Skid 0 0 0 15
Roll 100 10 2 1.5
Roll 0 0 40 40 YES
I have over 50 thousand rows of this stuff...so looking at the data to decide if there are duplicates will not happen.
Any formula that i can put in the column titled "Duplicate" that can identify the duplicates with a "YES" in the cell where duplicates are found?
formula to identify consecutive numbers in order, but having trouble figuring out how to identify consecutive numbers in random order.
Cell M1,N1,O1,P1, and Q1 each have a number, 1,4,9,3 and 7.
We have 3 and 4 being consecutive number but they are not in order, would like help in a formula to put a 1 on an empty cell S indicating that there is a consecutive number with a 1 if there are no consecutive numbers then it would give a 0.
The current formula only works if the consecutive numbers are in order, 1-2, 3-4, 5-6, etc...
=IF(SUMPRODUCT(--(N1:Q1-M1:P1=1)),1,0)
I want to do all columns combination that is (C=4^N/(3*N+1); N=4) for numbers 1,2,3,4.
as like this,
1111....2222....3333.....4444.....
1111....2222....3333.....4444.....
1111....2222....3333.....4444.....
1234....1234....1234.....1234....
As i am working on consolidating the Missing numbers manually, whether will it possible for making this automatic.
In Column "A" I have Multiple Duplicate Invoice Numbers and followed by the Different Transcation numbers in Column "B".
In Column "D" I have Each Invoice Numbers and in Column "E" Total Transaction Numbers i.e., no. of times each Invoice have Transactions.
In Column "F" No. of times we received the Transactions.
Here i need to manually need to update each Invoice's Missing Transaction number in Column "H" in single cell with comma separated to each Missing Transaction numbers.
Example:
Before : (Column "A" & "B")
Invoice NumbersTransaction NumbersInvoice NumbersTotal Transaction NumbersReceived Transaction Numbers
A2014000351501 A201400035150 3 2
A2014000351502 A201400035494 13 12
A2014000354941 A201400035881 12 11
A2014000354942 A201400035884 19 17
A2014000354943 A201400035888 14 13
A2014000354944 A201400037613 5 1
A2014000354945
[Code]...
Instead of doing this manually can we have the VBA to auto Update these missing numbers.
Here by i am attaching sample file.
I have stamps of 2 denominations: .32 and .33
I want to know how I would write/format a spreadsheet that would tell me what are all the possible outcomes between the two numbers and what the components of these two numbers would be.
For example.
(8 * .32) + (3 * .33) = 3.55
So somewhere I would be able to see that in order to achieve 3.55 I need (8) .32 stamps and (3).33 stamps
Lets say I have 10 numbers (1,2,4,5,6,8,9,12,19,13). Now, I am trying to get a list of all possible combinations (single digit, two digit, 3 digit, 4 digit... 13 digits).
Assume that the 10 numbers (this is a variable, it can sometimes be 9 or 11 etc) are in column A and I want all the possible combinations in column B.
I want to output every combination of a set of numbers. These permutations must include combinations that use only a few of the numbers as well as all eight...ie.
1,
1,2
1,2,3
as well as 1,2,3,4,5,6,7,8
The macro below is from
http://www.j-walk.com/ss/excel/tips/tip46.htm
This only produces combinations using every number. I'm not sure how this macro works but hopefully someone with better know how could run with it or break it down for me!
I only need to achieve this once but am pretty sure doing it manually will cause error and or madness
Dim CurrentRowSub GetString() Dim InString As String InString = InputBox("Enter text to permute:") If Len(InString) < 2 Then Exit Sub If Len(InString) >= 8 Then MsgBox "Too many permutations!" Exit Sub Else ActiveSheet.Columns(1).Clear CurrentRow = 1 Call GetPermutation("", InString) End IfEnd SubSub GetPermutation(x As String, y As String)' The source of this algorithm is unknown Dim i As Integer, j As Integer j = Len(y) If j < 2 Then Cells(CurrentRow, 1) = x & y CurrentRow = CurrentRow + 1 Else For i = 1 To j Call GetPermutation(x + Mid(y, i, 1), _ Left(y, i - 1) + Right(y, j - i)) Next End IfEnd Sub
getting All permutation and combinations of 4 letters and 4 numbers?
View 2 Replies View RelatedI need to be able to create a list of all combinations (where position doesn't matter, therefore its not a permutation) of a list of numbers with repetition enabled. I need to provide anywhere up to at least 10-15 numbers if possible and they are integers normally between 1 and 72. Example: (for numbers 1, 2, 3)
VB:
1
2
3
[Code]....
Am looking for an easy way to produce a list of combinations (maximum 6 numbers) from a range of numbers listed in 6 different columns:
Example
Column A contains : 1,2,3
Column B contains : 7,8,11,15
Column C contains : 12,16,18,19
Column D contains : 17,30,31
Column E contains : 30,31,32,33,34
Column F contains : 37,39,40
The rules are:
In each combination of 6 numbers, numbers should always be taken from ALL 6 columns. In each combination, numbers cannot repeat.
show me a formula to arrive the results.
I have 7 cells containing strings but not numbers on a row.
Now I want to list out all the combinations of drawing out 3 cells out of these 7 cells while the remaining cells that haven't been drawn out could also be listed out one column next to the drawn cells.
For example, I got 7 cells like this.
A B C D E F G (each letter in ONE cell)
And I want to list out all the combinations like this:
ABC DEFG
ABD CEFG
ABE CDFG
ABF CDEG
etc.
For more details, please refer to the attached sample (an .xls file being zipped).
I attached partial file so you can see what i mean. I pasted only a few combinations cause the file was to big and i wasnt able to attach it...there are 142506 combinations . But you can see what i mean. A VBA or a macro on the worksheet will do the job?
View 9 Replies View RelatedWhat I am looking for is to select between 7 and 15 numbers in total, I want all the possible 6 digit combinations for this.
EG: if I choose 2,9,11,13,15,17&26, it would look something like this
2,9,11,13,15,17
2,9,11,13,15,26
9,11,13,15,17,26
And so on.
If I chose more numbers (10) 1,2,3,4,3,6,7,8,9,10 it would start something like this
1,2,3,4,5,6
1,2,3,4,5,7
1,2,3,4,5,8
1,2,3,4,5,9
1,2,3,4,5,10
And so on.
Please remenber I would like to be able to secelt between 7 and 15 number and be given all the possible combinations.
I would like it to be in one sheet but if that can not be done on as many as it takes.
It would be good if I could just type the required number into A1,B1,C1 and so on and they just gave the combinations required.
So I have a list of integers in col A that is a truncated list from col B. I want to select the units in col B that do not appear in col A. I tried this statement
=IF(A2=B2,A2,0)
Since both lists (A and B) are ordered from smallest to largest this only worked until a value that is not in ColA appears in ColB and then all the cells following = O.
I have a column of cells, of which certain values have the prefix "EmployeeID:". I'm trying to identify the cells containing the prefix by evaluating each cell using activecell.offset and value to no avail. I've also tried to use the selection. find, however the first instance of the prefix is continually selected, and does not move on. I'm assuming that I must use the findnext feature, however I'm not having much success.
View 2 Replies View RelatedI have some data that has names but is not consistant i.e
Smith, John
Smith,John
I want a formula that says, if there is a space after the comma do nothing, otherwise insert a space between.
I have figured out the second part so my formula will look like
=if(some logic to identify a space after the comma ,"",already figured out this bit)
I am trying to develop an IF formula based on 2 variables;
1. The value in column Q = 4
2. The value in column AA is between -10% and 10%
When both are true, it should return a value of "YES" (or "NO" when untrue). I am having trouble with the range part. It could be that the range spans negative and positive integers, but I'm not sure. Here is what I've got at the present time:
=IF(AND(OR(Q2=4),OR(AA2<0.10)),"YES",IF(AND(OR(Q2=4),OR(AA2>-0.10)),"YES","NO"))
I have two tables,
one table (TABLE1) contains the name and a mile point a
the other table (TABLE2) contains name, mile point 1, mile point 2, and other data
I want to be able to pull data from TABLE2, based on TABLE1's name and MP. I want to be able to select data from TABLE2 whose name and mile point's fit with the data from
TABLE1
Line
MP A
SYS
100
8
?
TABLE2
SYS
Line
MP1
MP2
DATA
A
100
0
5
BOB
A
100
5
10
KON
B
100
10
15
B
I want to be able to replace the ? from table1 with the correct SYS from table2 based on the MP given
I started with something like: =if(and(name=name,mpa=>mp1,mpa=<mp2)),vlookup...
The problem is this doesn't work because im comparing one to many.
I've collected some data from a GPS logger regarding the speed of an athlete. I want to calculate how many sprints this particular athlete undertook during a training session.
Sprinting is defined as a speed of > 20 kph.
One sprint would be the attainment of one peak >20 kph before decreasing below 20 kph.
It's easy to identify the 3 peaks and thus sprints from the xy scatterplot in the attached file, but I'm struggling to find a way to calculate this.
I'm trying to identify duplicates with a return of "True" or "False". The attached workbook has column F for results (to read PI2 A if in column L, PI2 B if in column R or Both), but I want to query if everyone in column E is in column L or is in Column R and if so which one.
View 3 Replies View Relatedi have a spreadsheet that contains dates spread across different rows and columns. How can I identifying dates for this week and next week by colouring the cells?
example dates that fall within this week will be red, next week will be blue.
In Sheet1, If I have Group IDs in Column A and values in Column B as below, is it possible to create a summary in Sheet2 where the MIN value for each group ID is returned?
Sheet 1
A B
1 1
1 4
1 5
2 9
2 3
2 7
3 5
3 2
3 6
Sheet 2
A B
1 1
2 3
3 2
I would like to write a macro to examine a range of cells, and over-write some of those cells with a zero.
I want to over write those cells with either a numerical constant, or a formula with only constants, e.g.
"12345" or "= 123+567-(2*5)"
I do NOT want to over write cells that contain links or any functions:
"=page3!a5" or "=sum(a1:b6"
I have a list of variables created by a user like this:
BAND ID START END
Band1 06:00 08:59
Band2 09:00 15:59
Band3 16:00 17:59
Band4 18:00 22:30
Band5 22:31 24:29
Band6 24:30 05:59
Seperately I have data from a third party like this:
DATE TIME VALUE
18/05/08 17:22 10
19/05/08 02:15 1
20/05/08 07:14 5
20/05/08 21:36 15
20/05/08 25:43 1
21/05/08 19:15 15
22/05/08 18:26 16
22/05/08 24:59 2
etc.
I need to be able to identify which BAND ID belongs to each TIME in the list so that I can sum the VALUE figures for each BAND ID (e.g. the first time given,17:22, would belong to Band 3). have tried using LOOKUP but I can't seem to get it to work. Additionally, I have a problem with the 30 hour clock. Would I have to stick to a 24 hour clock? This would mean that I would have to find each time from the list that was between 24:00 and 05:59 and allocate it to the previous day because it is important to keep the values that I ultimately derive in the right day of the week.
