If 1 Row X 5 Columns Matches With Another 1R X 5C
Nov 14, 2009If a row starts with T3:X3 matches up with the rows in range T6:X8605 then goto that matching row... perhaps could be done with a macro?
View 9 Replies
ADVERTISEMENT
Find Matches In Columns
Oct 27, 2008I have two lists of email addresses in columns and I need to find the matches between columns and have those addresses returned to perhaps a third column.
View 2 Replies View RelatedFlag Matches Across Several Columns
Jan 8, 2007I have many small spreadsheets of data organised into 4 columns and anything upto 250 rows. I want to be able to test if all the cells along each row have the same data in each of the 4 cells, so 4 occurences of the same thing. Each row of data will be different. (I'm not intertested in matching the data going down the column).
However, I won't know with each spreadsheet what is the exact data I will be looking for - if all 4 cells don't have the same data, that is fine as this will then require my manual attention which is the purpose of my project.
I just want to avoid having to check through lots of rows of data where all the data does already match.
The data will usually be text but it can be IP addresses and numbers too. I need a formula or set of operators to use for is exercise.
Display Matches From 2 Columns
Nov 30, 2007i have one work sheet. Column A contains 800 names bolumn B contains 15,000 names.
I need to compare column A to column B then if the name exists displat the names in a seperate column.
Find Sub String Matches Between Two Columns?
May 30, 2014I am trying to match words in two separate columns that are not exact matches. any formulas or codes I can write to do this.Below is an example.
Column A
3m Corporation
Apple Inc
Allstate Corp
State Farm
Comparing Columns And Matches Display
Jan 27, 2009I have two columns of card numbers (16 digits) in text format, as column A and column B. In column C, I'm trying to figure out how to compare column A and B for matches, and display the match in column C, if there is a hit.
View 4 Replies View RelatedMoving Columns So That The Data Matches
Jul 21, 2009I need to line XYZ to XYZ as well as the information attached to XY&Z
i dont really know how else to explain it but i was hoping there was a macro or something out there that i could use to do this would make it a lot easier
Compare Columns; Remove Matches
Aug 13, 2009I've been searching for a method to compare two large columns of numbers and remove replicates from the "main" column. Column A has all the numbers that are in column B and many more. I want to remove all the numbers from column A that are in column B. The result being two columns with no matching numbers. (or a third column that has only the numbers from 'A' that are not in 'B').
My search results on this forum have found results that compare rows for matches & can make deletions; and also one method that could mark all the entries that were duplicates in both columns, but nothing to remove them. The datasets I am using have over 400k entries in some columns, so manual removal of marked ones is not feasible. I need an automatic deletion method.
Macro That Matches Up Two Different Columns Of Data
Jun 23, 2014I have a macro that I am working on which I have gotten stuck on. It compares Column A and Column C and any numbers which match are pasted into Column D.
What I am getting stuck with is I need to copy and paste the data for column B to Column E as well. So in other words.
If column A and B match then the number from Column A that matches B will be pasted in column D along with the value that is right next to it in Column B.
Attached File : MatchingMacro.xlsm
Compare 2 Columns For Close Matches
Jul 3, 2007I want to compare two columns (from two different files, but copied into a new sheet) for duplicates or identical entries. But here's the trick, each entry contains atleast a number of digits. I'm not quite sure how to find items that may be 80% identical (in the right order, but might be messing a digit, or there is a dash or a 'o' instead of a '0'). I know how to do it in C++ or Java, but not quite sure how to do it in VBA/macro. Here's an example of what I meant. Let's say column one has the following:
0244-34
9393-O0
3932-44
and second column has
939300
493384
938923
If I was comparing second column to first column, it can pick up the 9393-O0 one because it's close enough to 939300.
Compare 2 Columns On 2 Worksheets For Matches
Oct 24, 2007I know there is a forumla to compare a small database to a list, but can't find it (I used to use French Excel).
Here is an example :
In a sheet, my small database :
(in two different cells)
Value1 and ValueA
Value2 and ValueB
Value3 and ValueC
etc...
In another sheet, my list :
I have a list where there's a lot of Value1, Value2... in one column, and in the next column, a lot of ValueA, ValueB....
I want to check in my list : if I have Value1, then, on the same row (next column) I have ValueA, if I have Value2, then, I should have in the same row (next column) ValueB....
And if I have Value1 and in the same row (next colum) ValueB, I want some kind of "Error" text.
Can't find this function nor (of course) the criteria to use it correctly.
Compare 2 Columns And Return Matches
Aug 12, 2008I have two columns, one with the target text (D:D) and one with text I want to compare it too (A:A). If the text in column (D:D) matches the one in (A:A), I want to return the value in (B:B). I attached a sample of the problem i'm dealing with.
View 5 Replies View RelatedTotal Number Of Unique Matches In Two Columns
Nov 11, 2008Column A = numerical IDs, multiple entries, may have duplicates that should only be counted once in comparison
Column B = numerical IDs, multiple entries, may have duplicates that should only be counted once in comparison
Need: 1 cell that compares all of the A range to all of the B range and returns a a percentage of repeats. So, if there are 50 entries in A, and only 40 are unique, and B includes 10 repeats (unique, not multiple), then the returned value would be 25%.
How To Find Matches Between Two Columns And Copy Cells In Row
Jan 15, 2013I've just started with VBA and are trying to figure out following:
I'm using a validation list where the user choose one of twelve alternatives. The option she or he made is found in one or more rows in column B. If there is a match between the alternative in the validation list and in column B I want to copy some of the cells in the same row as the match in column B (to be exact, I want to copy the cells in column E, J, N and P) to another sheet.
I've succeeded doing this with one row but I don't know how to do without using that same code over and over again until Excel has made it trough all the rows. And there is over 200 of them.
Finding Partial Matches Of Text In 2 Different Columns
Mar 18, 2014how to find partial match of text in 2 different columns.
For example:
Column A:
Boston
Chicago
Los Angeles
New York
Detroit
Miami
[code].....
I want to be able to create a column that finds all the matching cities from A in B.
Compare Columns Across 2 Sheets & Copy Matches
Sep 10, 2009I have two sheets with pretty much the same content but not exactely. I need to compare the data from the first sheet to the data in the second sheet in this way:
data from column b (numbers) in the first sheet needs to be compared to data in column b in the second sheet. if this dosen't match it needs to go to the next line.
if the match is positive it needs to compare the data from column d on the first sheet to the data on the second sheet same column and copy the data from the first sheet's column d to the second sheet's column d. But only if the data in column d on the first sheet isn't blank. If it is it should leave the data on column d second sheet intact.
Count Data That Matches Criteria In 2 Columns
Feb 20, 2007I am trying to use a "=COUNT(IF(..." formula to count the number of hourly employees that have start dates older than 3 years. Column A has the start dates and column B has the salary status (S/H). =COUNT(IF(AND(A2:A1000<DATE(2004,1,1),B2:B1000="H"),A2:A1000)) This formula returns 1 no matter what I change the data to.
View 3 Replies View RelatedCompare Multiple Columns & Copy Matches
Dec 2, 2007I am trying to compare mutiple columns of data, match them and copy select data. Find matching cells in 2 different columns and copy select info into that row. See file attached
View 7 Replies View RelatedCompare 2 Columns To Another Sheet & Highlight Matches
Dec 23, 2007I have a workbook with two sheets imported from different sources. Sheet 1 is an AdHoc query from an Oracle 10g based program. Sheet 2 (PBIC 8 in my file) is a report generated from a property accountability program. The information from Sheet 2 is manually inputted into the Oracle program that generated Sheet 1.
I would like to have a macro that would compare the cell contents in columns "RegistrationNbr" (column S) and "SerialNbr" (column T) with the cell contents in Sheet 2 (PBIC 8). The match in Sheet 2 could be an identical match or part of a longer string. The matching cells in both sheets should be highlighted.
One thing to be considered is the column names in Sheet 1 will always be the same but the column letter designation may change base on the fields selected in the AdHoc query.
I didn't realize my file was too large and didn't upload.
Transfer Duplicates Based On Matches In X Columns
Mar 13, 2008I am working on a list of agents and I want to get rid of the duplicates. I know I could use conditional formating to highlight the duplicate names but it conditional formating won't allow me to find duplicates based on three cells in a row. My code below works to an extent but it misses some of the duplicates in the list and I don't know why. I have check the cells of the duplicates and they are an exact match.
Sub SearchDups1()
Dim rFnd1 As Excel.Range
Dim rFnd2 As Excel.Range
Dim iCount As Integer
Dim iEnd As Integer
Dim sAdr1 As String
iCount = 2
iEnd = WorksheetFunction.Match("zzzzzzzzzz", Sheet2.Range("D:D")) + 1
Do
Set rFnd1 = Sheet2.Cells(iCount, "D")
Set rFnd2 = Sheet2.Columns("D:D").Find( _
What:=rFnd1, LookIn:=xlValues, LookAt:=xlPart, _
SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=True)..............
List Exact Matches In 2 Columns On 2 Sheets
Mar 14, 2008Most likely another very basic on...
2 worksheets.
Worksheet 1, holding all data in column C.
Worksheet 2, the value in column B.
In need for a function that list all exact matches of the values in worksheet 2 column B that are found in Column C of worksheet 1.
I got this VBA code that checks for the string in worksheet 2, column B, but it is a Instr, and I need a exact match and only the exact match. Is this difficult to modify and how?
Or would this be a regular array function?
(I would not need a macro, since the data change constantly and I prefer function as they update easily)
Function matchArray(ByVal testString As String, ByVal dataRange As Range, Optional IndexNum As Long) As Variant
Dim outRRay() As String
Dim rangeArray As Variant
Dim xColl As New Collection
Dim xVal As Variant
Dim rIndex As Long
Compare Two Columns For Single Character Matches
May 20, 2008I have two excel sheets exported from two sources of information. Both sheets contain 1 column which is the primary data, ie, there is no duplicate of that information. Each information in these column represent 1 device in the real world.
Now, for example:
In one sheet, I have: SDV0620B
In the other sheet, I have: SSDV-B0620B
Please note that, both data actually represent the same device. What I now need to make sure is that, I ccan identify each corresponding data from the two sheets.
So, here is the problem that I am facing, identifying two data which are same but has two different representation techniques. (since the data are from two different sources)
I came up with the idea that, if I can check the sequence of characters with one column to another, then I might be able to pull it off.
For example,
we take SDV0620B, and match the sequence of character with SSDV-B0620B.
therefore, first is S (from SDV0620B)
match with SSDV-B0620B
then, D
match SSDV-B0620B
then V
match SSDV-B0620B
and so on, until the end.
And if the 1st sequence is found in the second sequnce of characters, then it is called a match! Hope I have explained it clearly. I have provided a file with some of the data copy and pasted out, to give you an idea of what the values look like.
Compare 2 Columns With Adjacent Data And Align Matches?
Jun 27, 2014I have two sets of data from columns A:N (O is blank) & P:AC. Column A & P are account numbers. I want to compare columns A & P for exact matches, there will never be any duplicates in either of these columns by themselves. If there is a match I would like that entire row to align, if there is no match I would like a row to be inserted. I have attached a copy of a worksheet of what I am looking to have done.
View 2 Replies View RelatedFind Matches In Multiple Columns And Return Header
Oct 29, 2012Lets see if I can put this into words.
I am trying to find matches of a specific cell in various columns. Example:
Header 1 -------Header 2----------Header 3
-ABC123-----------abc123--------------abd123
-abd123-----------hjk321---------------hdn234
-Abc123-----------dsd123--------------sds332
If I searched for the value "abc123" I want it to return Headers 1 and 2 in a seperate column. It would not matter if the same value is in one column multiple times
So the results would show me the Column Heading for anything that reads: "abc123", "ABC123", "AbC123", "aBC123"
Is this possible?
Comparing Two Columns And Returning Any Word Matches Found
Mar 21, 2014I have two lists, one has 250 items, the other 4500, both contain a String
I need to compare any word within a cell in the short list, against any word within a cell in the long list.
The returned value needs to display both the short list item, as well as the long list item for manual comparison by an analyst.
Macro Code To Filter Out 'Exact Matches' In 2 Columns
Nov 29, 2006I have a large worksheet in drive C: called 'hits.csv' that has manufacturer part numbers in column G and column L.
I need macro code to find all rows in the worksheet where the part number in each cell in column G is exactly the same as the part number on the same row in the corresponding cell in column L. The macro should then delete/remove all rows where there is no exact match.
Note: The part number in every cell in column G is the only thing that is in each cell in that column. However just to warn you that the part number in every cell in column L is at the beginning of each cell, followed by a space and then a description of the part.
Once it has done the above, I would also like this macro code to open a worksheet called 'partnumbers.csv' in drive C:. It should then compare the part numbers in column A of this file with the part numbers in the above worksheet ('hits.csv'). The cells in Column D of the file 'partnumbers.csv' all contains a price. Where the macro finds an exact match on the part numbers in these 2 files, it should copy the price from the cell in column D in the file 'partnumbers.csv', into Column K of the other file, 'hits.csv' where the match exists.
Match 2 Columns Across Two Sheets & Copy Rows Of Matches
Jan 20, 2009I would like to match column data in a source spreadsheet to column data in a target sheet. If a match is found, I would like to copy the corresponding row range from the source sheet to a separate, third sheet. For values where no match in found in the a target sheet, I would color the unmatched cell in the target sheet red. If a match was found, the cells would be colored green. The data in the Source sheet is in column A, while the Data in the Target sheet is in Column T. The data will be pased in the third sheet in Column T preserving original formats
I have this code, gleaned from several postings on this forum that somewhat works. The problem is that I get false mismatches (i.e. some cells get colored red even when there is a match and the data got copied to the third sheet) even though there are no duplicates. I have made sure that the formats are identical in both Target and Source sheets to try to fix this. Also, I don't want to cut the entire row , but just copy and paste a row range onto a third sheet. The column and row ranges are variable. I am attaching a file.!!
Sub CutRows()
Dim i As Long, k As Long, n As Variant, r As Range
Application. ScreenUpdating = False
With Sheets("Source")
Set r = Range(.Cells(1, 9), .Cells(65536, 6).End(xlUp))
End With
k = 0
i = 6
While Not IsEmpty(Sheets("Target").Cells(i, 20))
n = Application.Match(Sheets("Target").Cells(i, 20).Value, r, 0)
If IsNumeric(n) Then
Sheets("Target").Cells(i, 20).Interior.ColorIndex = 35
k = k + 1
Sheets("Source").Rows(n).Cut Sheets("Sheet3").Rows(k)
Else
Sheets("Target").Cells(i, 20).Interior.ColorIndex = 3
End If
i = i + 1
Wend
Application.CutCopyMode = False
Application.ScreenUpdating = True
End Sub
Compare Columns On Different Sheets, Return Matches To Third Sheet
Mar 21, 2007I've got two worksheets ("June" & "July"). On both worksheets, column A is comprised of ID numbers and column B contains dollar amounts. I need to compare the ID numbers in Column A on each worksheet, and if they match I want to copy the ID number and the amount to a third worksheet ("Results").
View 3 Replies View RelatedCompare Columns Across 2 Workheets Copy Cell Next To Matches
Jan 19, 2008I have this code that compares two columns on two different sheets when it finds a match it then puts the match on that sheet your running it from in my case sheet 2. However i want to change this slightly and im having a hell of a time. I want to match but when tha match happens i want it to copy the cell next to the match.
Sub Find_Matches() ...
Comparing Two Columns On Different Worksheets And Adding Rows Where Matches Occur
Jan 18, 2014Essentially what I want to automate is a check through one list on the Sheets("Notes") in column A, with another column B on Sheets(template). If there is a match I want to insert a part of the row that the match occurred on Sheet("Notes"), and insert it above the row where the match occurred on Sheets(template).
Here is my code so far, currently I keep getting a "Application-defined or object defined error" on the line
VB:
Sheets("Notes").Range(Cells(i, 2), Cells(i, 11)).Copy
VB:
Sub add_notes(template As String)
Dim Rng As Range
Dim i As Integer
[Code].....