If Statement Required For A Cell Range
Dec 4, 2009If C36, C37, C38 or C39 contain a 0 then put 0 if not continue with the the formulae
I have this but I know its not right as this is a sum: =IF(C36:C39=0,0,ROUNDUP((C36/C37)+(C38/C39),0)).
ADVERTISEMENT
Shorter If Statement Is Required To NOT Show The #N/A
Dec 1, 2008When functions like MATCH, LOOKUP, etc are being used the result can be #N/A. An additional IF statement is required to NOT show the #N/A. The Example =if(ISERROR(match ... very long...),"",match ... very long ...) Read =IF(A is Not OK, "", A) A (very long formula) is used twice If your formula is very long the total formula even get twice as long. Is there a way to shorten this?
View 4 Replies View RelatedIF Statement Does Not Produce Required Results: Resulting In Zero Values In Most Conditions
May 25, 2009I have a work sheet which includes a column of numbers representing certain daily events. I am building a user defined function to analyse the trend in the numbers by assisigning values from -2, -1, 0, 1, 2 based on comparison of two days.
Below is the function I built but it is not working, it is resulting in zero values in most conditions. I have attached the sheet which includes the numbers and the function.
Using A Cell Range In An If Statement
Jul 23, 2009I am trying to do a calculation based on the conditions of two cells but one cell I would need the range of the report. Either way, here is my current statement.
=IF(P2:P15 = "Green Building 15",SUM(COUNTIF(C2:C15,"Over AC")+COUNTIF(C2:C15,"Top Lab AC")),0)
I get a Value# error (though it systematicaly works if you check in the funtion area), and its because of the range I am using, is there anyway to bypass thiss issue or can someone give a better calculation.
Value Test Of A Range Of Cell And If Statement?
Feb 17, 2012I am trying to build a macro that test for the value of each cell of a range (in a column), and if found, then the value of the cell of the same row (another column) will be set to 1. If not, then the macro writes a formula to get some data from BBG (this part is ok). this is what I have done so far but I have an error message, telling me "Not Else with out if" .
Code:
Sub Fx()
With Worksheets("DivRelease")
Dim LastLig As Long
[Code].....
IF Statement To Search If Value In Cell Is Equal To A Value In Range
Jul 2, 2014I want to create a simple if statement to search if a value in cell B2 is equal to a value in the range 'CodeCheck'!A1:A92
I have written the code =IF(B2='CODECHECK'!A1:A92,"Y","N")
I am always getting N returned even though I am 100% sure the data in B2 is in the 'CODECHECK'!A1:A92 range.
Formula Required To Return Limited Range Value?
Jun 12, 2014I'm looking for a formula to do the following:
I'm building a table (see attached) where I could have a value in cells D6 to P6 that ranges from 0 upwards. In the respective cell beneath each 'value' cell (D7 to P7) I need a formula that will return a figure of 10 if the value in the cell above is 0.4 or below reducing to 0 if the value in the cell above is 1.0 or above.
Object Required Passing Range To Function
Sep 28, 2007I will post my code and point out where the error occurs.
Sub GetProd()
'Averages Daily Production over the month
Dim WellRange, MonthRange As Range
Dim Month_ As Integer
TotWells = Sheets("R").Cells(1, 2)
TotMonths = Sheets("R").Cells(1, 4)
Month_ = Sheets("R").Cells(2, 4)
For Flag = 1 To TotWells
Set WellRange = DefineWellRange(Flag)
WellRange.Select <-----Used this To check If Range gets passed back properly.
For c = 1 To TotMonths
Set MonthRange = DefineMonthRange(Month_, (WellRange)) <---Error Here
Next c
Next Flag
End Sub ...
So the error occurs in the main "GetProd" Sub at the point when it calls the DefineMonthRange Function, its a 424 "Object Required" Error. Just before this is called I have a "WellRange.Select" which I was using to make sure that WellRange is in fact a range, and it does select the appropriate area.
So My question is of course, why I get an object error even though I am passing a range to a function which is expecting a range?
Object Required Error Setting Range Variable
Aug 22, 2007code is getting an error on the bold line below. My error message is run time error 424 - object required.....
View 7 Replies View RelatedExcel Function Required To Allocate Project Cost Between Two Date Range
Dec 9, 2013Attached is a spreadsheet wherein I'm trying to extrapolate project costs across various months based on working days in a month subject to start and end dates of the project. Need an accurate formula to spread the cost.
Days & Cost Allocation Example.xlsx‎
Required Entry In Cell
Nov 30, 2006I have a cell in which I want either a Y or a N entering. I do not want this cell to be left blank.
I can add a validation so that nothing but Y or N can be entered but it doesn't stop it being left blank. I entered an N (as a default) forcing the user to change it to a Y if needed but I don't want them to be able to delete and leave the cell blank.
If Statement In Macro: Macro To Change A Range Of Cells Colours Based On A Single Cell?
Mar 16, 20071st - Need a macro to change a range of cells colours based on a single cell having a value greater than 0.001. ie. cells A1 - G1 need to change to grey based on cell F1 having a value greater than 0.001 entered in it?
2nd - Also a macro for deleting the text contents of cell C1 based on cell F1 having a value greater than 0.001. Therefor if cell F1 has a number greater than 0.001 it changes the colour of celss A1 - G1 and also deletes the text in cell C1?
If Statement Within If Statement (recognize The Cell)
Oct 1, 2008I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
View 2 Replies View RelatedCell Validation Code (If Then Else) Not Working As Required
Jul 10, 2012I have the following code to check the date of birth entered into cell C18 and to alert the inputter if the age is either under 16 or over 25.
VB:
Sub AgeValidation()
Dim age As Integer
Dim dob As Range
Dim AgeMsgAnswer16 As String
Dim AgeMsgAnswer25 As String
[Code] .....
It works to some extent in that the correct message box pops up if the age is under 16 and similarly if over 25. If answering Yes on either message box then the correct thing happens. Its what happens if the inputter selects No thats not right. If the age is under 16 and the user selects No in answer to "Is this correct?" then the code is clearing the cell contents and showing the calendar again but is also popping up the 'Over 25' validation message box which then won't go away until Yes is selected. Also there are then multiple copies of the calendar open.
What I need the code to do is look at the date selected from a popup calendar in c18 and decide if that age is within the 16-25 year old range. If it is outside that then the inputter needs to be alerted to it. I can't use the inbuilt data validation because there are some scenarios where it would be acceptable to have an age outside of that range but we want to cover inputting errors as well as double checking the age.
When a msgbox pops up to alert the inputter and they choose "Yes" to say the date of birth is correct then I want the focus to go to cell C20 ready to input the next piece of information.
When the inputter selects "No" on the message box, then I want the original date to be deleted and the calendar to reappear so they can select another date. So effectively resetting the field so they can start again choosing a date like when they first entered the cell.
VB Code Required To Move Macro To Next Row Down Cell
Apr 18, 2014I have 'sheet 1' (data collection sheet) and 'sheet 2' (form filling sheet)
I've recorded a macro which sends data from 'sheet 2' to 'sheet 1' (linked to a submit button on 'sheet 2')
I want the macro to allow the next form filled information to be transferred onto the next line down on 'sheet 1'.
The current code is:
[Code] ......
VBA Code Required To Pick Value In Upper Cell?
Feb 25, 2014I want a macro fill the value which is on the upper cell.
eg:If A1= Code and A2 is blank, A2 should be filled with A1 value which is 'Code'.
In the attached, I want C3,C4,C5 to be filled with 'A' which is in C2,
likewise I want C7,C8 to be filled with 'B' which is in C6 and C11 to be filled with 'C' which is in C10, likewise the data has to be filled in entire C col.
Formula Required To Pull Some Info From Cell
Apr 15, 2008i have a list of names which also contain e mails addresses after the names, they are displayed as (In column B onmy spreedsheet)
Armani Stevens/GB/companyname/GB@soso
what i need from the above is just the name (up tp the first backslash)
so i would need Armani Stevens and disregard the rest.
What i would then need to do is to take the name and then see if the names is in the list which is situated in column A,
so to sum
once i have Armani Stevens extracted from Coulmn B i would want to see if this name is in Column A
Names are obviously of all different lengths and there is always a space after the first name and surname
Data Validation: Multiple Formulas Required In 1 Cell?
Nov 23, 2009I currently am using Data Validation drop-downs (which are identically referenced) in a number of cells (From J10 to J19). Each entry refers to a Crew departure &/or arrival time (based on an Aircraft schedule) and crew Subsistence & allowance ($17 per day). Referenced from “K10:K19” is USD currency:
DAYS:CURRENCY:
“J10:J19” “K10:K19”
“FULL-WEEK”(References 7 Days) = “USD 120.00”
“SATURDAY (DEPART)”(References 2 Days) = “USD 35.00”
“SATURDAY (ARRIVE)”(References 6 Days) = “USD 100.00”
“TUESDAY (DEPART)”(References 5 Days) = “USD 85.00”
“TUESDAY (ARRIVE)”(References 3 Days) = “USD 50.00”
I am trying to establish a way to specifically; select a particular day in the Data Validation drop-down menu (J10:J19) and a formula automatically converting the result to “USD Currency” for each of the 5 alternatives?
So in other words, each data validation cell will have 5 matching formulas pertinent to each specific orientation (Day)?
E.G.Select “FULL WEEK” from the drop-down option and “USD 120.00” is revealed / converted?
Select “SATURDAY (DEPART)” from the drop-down and “USD 35.00” is revealed?
... “SATURDAY (ARRIVE)” = “USD 100.00”
... “TUESDAY (DEPART)” = “USD 85.00”
... “TUESDAY (ARRIVE)” = “USD 50.00”
The closest I have managed (with no real success) is as per the following formula:
IF(T26="FULL_WEEK",X26,IF(T26="TUESDAY_(ARR)",X27,IF(T26="SATURDAY_(ARR)",X28,IF(T26="TUESDAY_(DEP)" ,X29,IF(T26="SATURDAY_(DEP)",X30)))))
I would be so incredibly grateful if somebody could help me (in laymen’s terms)?
Range Select Statement To Select A Cell
Jul 7, 2008I want to put a range select statement to select a cell and count down 10 cells and copy.
View 9 Replies View RelatedMacro To Find Required Data Than Copy/paste In Specific Cell Address
Nov 4, 2009I want to copy some data from internet and paste it in to worksheet location Range A1:A30. the data look like following information.
LocationKuwaitP.O.Box:4819 SafatAddress:ShuwaikhTel:-22253580Fax:-24343645Category:CONSTRUCTION COMPANIES
the above information have following header ie. Location, P.O.Box, Address, Tel, Fax and Category.
every time one of the header inforamtion is missing ie. Address or P.O.Box, Or Fax, due to this problem every time cell address of information aganist header is change. supose in first copy/paste Tel inforamtion is in A15, but second time it may be on A13, and 3rd time it may be on A17 and so on.
I want to make a macro which search header ("Location", "P.O.Box", "Address", "Tel", "Fax", "Category" ) from a Range A1:A30. than down two steps to copy header information (75325412) and paste in fixed cell location C1:C5 (C1=Name, C2=Location, C3: P.O.Box, C4=Address, C5=Tel, C6=Fax, C7=Category) in same sheet. and repeat the steps to copy information aganist header from all header in Range A1:A30.
IF Statement Between A Value Range
Jan 13, 2007This is hard for me to articulate, so hopefully someone will understand what I'm trying to do.
I'm attempting to construct a formula in Excel, that basically says: IF the value is between these two numbers, multiple them by this percentage, or if the value is between these numbers, multiple it by this percentage.
So, let's say cell A3 equals 10,000,000, A2 equals 5,000,000 and A1 equals 1,000,000... Also cell B3 equals 10% and B2 equals 5%. We'll say that number X is in cell C1. If the number X is between 10,000,000 & 5,000,000 it should by multiplied by 10%. If number X is between 5,000,000 and 1,000,000 it should be multiplied by 5%.
I've tried a formula similar to: IF(C1 (Rng(A3:A2), C1*B3) ---- Meaning that if the number is between 10,000,000 and 5,000,000, multiple the number by 10%.
Using MID On Range In For Each Loop With IF Statement?
Aug 8, 2013I am trying to loop through a range, checking for a cell to contain one of two characters and then put a value in a cell to the side (well 3 away) of it. Im getting an error for Type mismatch on line:
VB:
If CellContent = "h" Or "v" Then
the data in the cell is an along the lines of '12.34.56.43 som-thi-vh-ng1'
VB:
Dim MyRange, MyCell As Range
Dim CellContent As String
Sheets("Sheet1").Activate
[Code]....
If Statement For A Range Of Numbers
Aug 28, 2009I have tried over and over to get a point value from the percentages posted below but my formula will not return consistent results. Am I doing something wrong.
94% - below 1 Point
95%-96% 2 Points
97% 3 points
98%-99% 4 Points
0% or 100% 5 Points
Reference Cell is AG2 and is .99 but for some reason I return a 5
=IF(AG2=0,5,IF(AND(AG2>0,AG2<=0.94),1,IF(AND(AG2>=0.95,AG2<=0.96),2,IF(AG2=0.97,3,IF(AND(AG2>=0.98,A G2<=0.99),4,5)))))
Nested If Statement Within Range
Apr 7, 2009I dont know how to nest and if (if that is the right way to go about it). this is what I have ....
View 10 Replies View RelatedIf Statement With Range Of Numbers
May 2, 2012Need all numbers in between the ranges set. So if I input for example 8765 then the cell still comes up with 18.
IF Cell E25 is 0-7200, then 12, If cell E25 is 7201-14400,
then 18, if cell E25 is 14401 - 21600, then 22,
if cell E25 is 21601-28800, then 28, if cell E25 is 28801 - 36000, then 34.
If Statement Continuing Through Range?
Jun 21, 2012so on sheet 1 i have a list in column b (as below) and in column G I want to put a note "not included" if the cell matches what is in sheet 2:
AAA
BBB
CCC
DDD
EEE
On sheet 2, column A I have a list of items that I want to not include which I want to be able to add/remove/adjust over time. For example:
DDD
EEE
FFF
LLL
I can get it to put in the correct text into sheet 1 with the following but I don't know how to get it to look through all values on sheet 2 and then only enter the "not included" on sheet 1 if it is listed on sheet 2.
So far I have
Sub checksheet()
For Row = 1 To 428
For col = 2 To 256
[Code]....
This only does it for what is written in cell A3 on sheet 2 and does not keep going down the list in sheet 2.
I think I need to define the range better on sheet 2 and ask it to look through that, but im not too sure.
If Statement With A Range Selection
Aug 9, 2007I was making a simple spreadsheet as I'm taking practice tests for some IT certifications and the spreadsheet I was making was to chart out my progress.
I had a range of scores in some cells and one of the formulas I used so that I didnt have errors in the sheet like div/0 went like the following:
=if(b5:b50="","",sum(b5:b50)) this seemed to work really well for the one section, however I tried to get a little fancy as always and I think I messed something up. Beneath that I tried to separate each practice test with the same sort of formula resulting something like the following:
=if(b30:b40="","",sum(b30:b40)) this however just returned an error #value. I dont understand why the first formula worked and the second didnt. Then again, I'm not really an excel guru, back in college I was really good with it but I dont really remember much.
If Statement With Selected Range
Aug 10, 2007I'm trying to create an if statement that have 2 criterias. Here's what I've created:
=IF(COUNT(F2:F4)=('2007Open'!H2:H4),COUNT('2007Open'!B2:B4)=8,'2007Open'!H2:H4)
This statement is returning the #VALUE error.
I guess what I'm trying to do with this statement is to count how many values are not equal to 2007Open!H2:H4 and meets another criteria of 8.
Date Range In An IF Statement
May 19, 2009I'm trying to create an IF formula that returns the month as text between a certain date range in a different column.
For example
Between the 25-APR-09 and 23-MAY-09 I want to display "May" 24-MAY-09 and 27-JUNE-09 "June"
And so on so forth, the column with the dates in it is in date format.
If Statement, All In Range Are Not Null
Mar 21, 2007I need a formula that will return "true" only if ALL cells in the specified range are not Null (<>""). I'd like to assign a value (% complete) only after all tasks under a phase have been given a completion date.
View 7 Replies View Related
