Ignore 1st Value In ComboBox
Jan 23, 2008
I have a small problem. Basically what I need to do is this: I'm setting the initial value of my combobox to say "Select a Payer". The combobox has a list of insurance payers. When one is selected by the user they click a button and on another sheet is displayed thier selection in a Pivot Table. Unfortunately, when the user selects nothing (the combobox stays at "Select a Payer") problems occurr.
What I want is to use if combobox1.value = "Select a Payer" then combobox1.value = {the first actual Payer in the list}. Index number 1 ?
View 4 Replies
ADVERTISEMENT
Dec 3, 2011
I need to add items to a combobox without adding duplicates or empty data. I am able to add without empty data but how to ignore the duplicates.
Here is what I have...
Code:
Dim GL As Range
Dim ws1 As Worksheet
Set ws1 = Worksheets("Main")
For Each GL In ws1.Range("MainGL")
If IsEmpty(GL) Then
'do nothing
Else
ComboBox2.AddItem GL.Value
End If
Next GL
View 3 Replies
View Related
Jun 26, 2007
I have in column D starting D9, I have numbers starting at 1, and may finish at 100. But there could be duplicates, 1,2,3,3,4,5,6,6,7,7,8,9,10,10,11,12,13,.........
I would like to only copy the range D9 to H (End of column D), ignoring all the duplicate numbers, to another sheet.
So on the second sheet, it would be 1,2,3,4,5,6...... with the data copied from E,F,G and H.
View 9 Replies
View Related
Mar 30, 2009
Am trying to get dynamic population of 2nd combobox based on match from criteria in combobox 1.
if column a = bears and column b = colours of bears then
when I select bears in combobox one, combobox 2 would populate with colors of bear.
I am think of having a combobox 1 change event that evaluates each row in a specific range (does it match the criteria?) if so, then add 2nd cell (column b) of that row to the combobox 2.
I know it would probably involve match and offset, add item and loop, but I am not sure what the syntax is.
View 9 Replies
View Related
Mar 30, 2014
I need to populate two combo boxes from excel sheet, the data will be like below:
Column A Column B
A 1
A 2
A 3
A 4
A 5
B 100
B 101
B 102
So from the above data, one combo box should hold unique values A & B.
On selecting a value from the 1st combo box A or B, respective values should be populated in 2nd combo box.
So the data should be like below:
If A is selected in the 1st combo box, then 2nd combo box should only show the values 1,2,3,4 & 5.
If B is selected in the 1st combo box, then 2nd combo box should only show the values 100,101 & 102.
Friends I need it in a macro and one important point is, this is dynamic and it is not static and the data can be more.
View 1 Replies
View Related
Dec 8, 2009
When I make a comboBox selection from the dropdown menu, the menu stays down until the last statement of the comboBox code is finished. How do I make the dropdown disappear immediately after the selection is made?
View 9 Replies
View Related
Jun 20, 2009
try and achive is when a user selects a item from the 1st Combobox the 2nd Combobox is the populated with the cell that is to the right of the selected item.
for Example if a user selects AAB from combobox1,, Combobox2 should populate with Belly.
Maby using combobox1_Exit for the excercise.
View 14 Replies
View Related
Sep 28, 2013
I created a UserForm then linked ComboBox1 to range A2:A, TextBox2 to range E2:E, and ComboBox3 to range M2:M of the same worksheet, named Sheet3. The row contents in Column A, Column E, and Column M are associated. Therefore, when the UserForm is active I want to be able to select a row from Column A in ComboBox1 and have the UserForm pull the contents from the same row of Column E into TextBox2, and Column M into ComboBox3. Here is what I have so far, but its not quite doing it.
Code:
Private Sub UserForm_Initialize()
Sheets("Sheet3").Activate
Dim ColARange As Range
[Code].....
View 2 Replies
View Related
Jun 12, 2006
I have a table, headers "FirstName" and "SurName".
Further a Userform with 2 Comboboxes "FirstName" and "SurName"
I'd like to choose the FirstName (say Jack) in the "FirstName" combobox, and based on that get the choice of the Surnames of all my Jacks in the "SurName" combobox.
Actually my sheet has much more fields and comboboxes, but i think my problem is just that I do not find a way to populate them dynamically.
View 9 Replies
View Related
Feb 8, 2008
How can i Loop through a combobox's values and compare to a string value and then set the listindex of the combobox to that value?
View 5 Replies
View Related
Nov 27, 2012
I have created a userform in which there are numerous Text and Combo boxes. In ComboBox 1 I have, in effect, a list of named ranges in a spreadsheet.
I want the RowSource for ComboBox 2 to equal the item selected (named range) in ComboBox 1.
VB:
Private Sub UserFormcriteria_Click()
Set ComboBox2.RowSource = ComboBox1.Value
End Sub
View 8 Replies
View Related
Jan 23, 2009
I want to fill two Combobox (cmb 2 and 3) dependent on what the user has chosen in a first ComboBox (cmb1).
The first combobox ist based on on the first sheet, and the second and third combobox shall be filled with values from other worksheet corresponding on combobox 1 selection.
I attached a xls to this post to explain better.
View 14 Replies
View Related
Dec 2, 2009
I have a userform with a combobox that has three items to choose from: Blue, Red, and Yellow. When a user selects one of those options, I would like another combobox to appear on my userform with a specific list for that option.
View 2 Replies
View Related
Apr 9, 2012
I'm trying to make a userform that has 2 combo boxes. I have just 3 columns right now.
Procedure GrpADA-QSI DescProcedure GrpAnesthesia And
Drugs9210-LOCAL ANESTH/NO SURGAnesthesia And DrugsAnesthesia And
Drugs9212-TRIGEM BLOCK ANESTHCrowns And BridgeAnesthesia And
Drugs9215-LOCAL ANESTHESIADenturesAnesthesia And
[Code] ........
I copied and pasted Column A into Column C and then removed duplicates. I named Column C 'ValList' and placed it in the RowSource for ComboBox1. What I now want is for ComboBox2 to populate based on my selection in ComboBox1. There are no duplicates in Column B. Duplicates are in Column A.
I also named Column A 'Proc_Grp' and Column B 'ADA_QSI_Desc'
For the properties in Combobox2, I left the RowSource empty. (that's correct right?) Because there's going to be a code that links Combobox2 to Combobox1... I think...
View 6 Replies
View Related
Apr 8, 2007
is it possible to perform calculation such as sum,multiply value of 2 combobox and get it shown at 3rd combobox/label at userform initialize stage?
View 9 Replies
View Related
Dec 7, 2009
I am trying to figure the sum of cells B12:B28. However some of the cells in the range have a #N/A error due to a VLOOKUP function that is pulling data from a different sheet. Currently the data it is pulling is a blank cell, but will at some point have a value in it. How can I make the SUM function ignore the #N/A?
View 5 Replies
View Related
Apr 22, 2009
I have a column of numbers that are calculated by a formula that doesn't always come up with an answer and returns the value #NUM!. See the attached XLS. The answer to the sum function is always #NUM! if a #NUM! is included in column of values put into the SUM function. I currently work around this issue by redoing the column with the SUM statement to avoid the #NUM!'s. Is there a logical test that can be applied to solve this issue? an I add another column that reset the #NUM! to ZERO and then SUM that column?
View 4 Replies
View Related
Feb 3, 2014
I want formula to leave cell empty if there is 0 somewhere but to real value if there is something else.
So far I figured how to do the first part.
=IF(A1;"0";"")
View 1 Replies
View Related
Apr 6, 2009
I have Dynamic named ranges (SUMPV)
SUMPV is range I31:I300
I use the following formula to sum up.
=SUM(SUMPV)
The problem is that sume cells night produce #value thus giving an error in the Sum formula.
I tried the =SUMIF(SUMPV,"#N/A") but not working..
View 9 Replies
View Related
Jun 9, 2006
I have a userform where I have 2 comboboxes. The first combobox shows the the first column (only 1 of each) and the second comboBox shows me the secondary list that correlates to the valuse in the first from column B. Now I have a text box that I am trying to get the value from column C depending on what I have in the first 2 comboboxes. What is the easiest way to do it? This is all in VB since it is a UserForm, and using Vlookup seems to be too many lines if I go that route. Is there a way to use Index and Match in VB where it would be more efficient? I attached just a sample of how the data would be layed out in the Excel sheet.
View 4 Replies
View Related
Mar 22, 2009
I am using a lookup function to return nalues to a column. Some of the values returned are ### and I cannot SUM this column. I either need to adjust the lookup formula to not return ### or adjust the SUM function to ignore ###.
View 5 Replies
View Related
Apr 27, 2009
I need the folwing formula to ignore any 0 in column Q, and rank only values of 1 or greater.
=RANK(Q6,$Q$6:$Q$20,1)
View 3 Replies
View Related
Nov 13, 2013
I have specific cells A5, C5, D5, F5, H5 that I require and average value for but need to ignore those cells that have a zero value in the averaging.
View 5 Replies
View Related
May 5, 2014
I have a huge data set that simplified looks like the one below.
I would like to write a vlookup formula that ignores vlookup-value="need manual input", "", and "N/A", and instead continue to find the next lookup value that is not equal to "". if no match at all or only match to "" or "need manual input" I want the output to be "need manual input"
So, in worksheet 1 cell B1 i want to generate value 73530C10 (lookup-table cannot be sorted)
Worksheet 1
A
1
Bob
2
John
[Code] ..........
View 5 Replies
View Related
Feb 12, 2008
Is there anyway I can change a sumproduct so that ig ignores any errors?
The formula I am using is:
=SUMPRODUCT(--(data!$L$2:$L$7441='Level 2'!$D3),--(data!$P$2:$P$7441='Level 2'!H$1))
View 9 Replies
View Related
Aug 4, 2006
How can I get this formula to ignore a zero value and continue looking to the left until it finds a whole number?
= LOOKUP(9.99999999999999E+307,N77:X77)
View 3 Replies
View Related
Jul 23, 2014
I have a sheet (example attached) I need a formula to recognise only the numeric values either by automatically deleting the words or by entering the numbers in another corresponding sheet, either would do.
View 5 Replies
View Related
Mar 2, 2014
Let's say I have a set of values (A1:A10) where each contains a number, with a varied amount of decimal places (some may have 0, some may have 10)...how can I make a formula in cell B1 that averages A1:A10, ignoring the decimal places (rounding to the nearest whole number)
For example, if this was A1:A10
93.11
94
92.12321
95.1
96.7
98.1
99
100.03
88.6677
85.6675
If I did the Average (=AVG(A1:A10)), I would get 94.2498. But I don't want this, I want the formula to take into account the numbers rounded to the nearest whole number, meaning, I want to take the average of..
93
94
92
95
97
98
99
100
89
86
Which would give me a value of 94.3.. In this example, there isn't much of a difference, but I was simplifying the numbers for time sake
View 1 Replies
View Related
Mar 9, 2009
The summary page summarises the source data into how much revenue each department has made over 12 months.
However the formula in Summary worksheet column B will only total up the amounts if the month in the Source worksheet column B is the 1st of the month. How do I change the formula in Summary worksheet column B to purely go by month and ignore the day?
View 4 Replies
View Related
Mar 16, 2009
I am using the vlookup function to pull in values from another sheet that I will call sheet2. I am using a cell reference for the lookup value on sheet1.
On sheet1, the value in the reference cell has a superscript "1" that corresponds to a footnote at the bottom of the page. The corresponding lookup value on sheet2 does not have any superscript. Is it possible to make the vlookup function ignore the superscript for the purpose of the lookup?
View 14 Replies
View Related
