I'm just fiddling around with excel at the moment and have a created a cell with a value of 16. It represents the number of days an event has been running for.
I'm not sure how to make it increase by +1 every day without me having to open excel and change the value in the cell.
in a1 I have a number 1, a2 is a number 2. I want to keep on counting down to number 7691. Just do not know how to do this.
View 5 Replies View RelatedI have a worksheet that I need a piece of code for, Cell E1 is an amendment number that increases every time a new one is put out,
so they can be tracked.
Every time the sheet is saved the value in cell E1 needs to increase by 1.
I should know this and I'm sure its something very simple that just wont come to me. I have two cells, one has "total billable hours" in a month, the second needs to calculate how many days based on that number. So it needs to increase by 1 for every multiplier of 24 in the first cell.
View 3 Replies View RelatedI have cell F15 which is blank by default, and cell D14 which pulls a value from another sheet (D14's value is =Info!X20). For D14's properties I have it set to show thirds (Custom Property "# ?/3"). I want to make D14 increase by 1/3 for every increment of 60 that F15 contains. For example, let's say D14 is 12. If F15 is 59, it won't change. If it's 60, D14 will be 12 1/3, and if its 180, it'll be 13. I think I'm close, but just can't quite get it.
View 8 Replies View RelatedFirst I would like to say that I am not English nor very good to explain myself so hope the title is according to the forums rules. Now to my problem
I would like to to put in for instance the number 100 in cell A and then the number should appear in cell B. I would like to remove the number in cell A without the number in cell B to dissapear. Then add for instance 50 in cell A to get the number in cell B to add up to 150 and so on. How can I do this? I would like to add that cell B is already connected to a different cell. And I am using Vista.
I've got an excel sheet that has a series of successive numbers down the side from 1-15 per sheet. I've done this by putting the cell formulas as previous row +1. (these are being used as unique reference numbers)
I want to be able to print this out multiple copies of this in one instance without having to manually adjust the first number multiple times then print the sheet. I also want it to be automatically saved as the most recent page printed, so that when it's printed the number continues on from the previously printed sheet.
I found a macro online which I have adjusted to increase a cell by 15 each time it is printed (to change the first number of the row). But I've realised that I'm printing the final page twice if I run the macro again. Is there any way to get round this? If I print 1 sheet there is also no adjustment in numbers.
I also haven't got onto the save part.
This is the macro I am currently using:
"Sub PrintSequence()
'
' PrintSequence Macro
' Macro recorded (altered) 8/16/2005 by Roy Wagner
[Code].....
I would like to place in sequence increasing the numbers of one I creak in a cell.
In the formula I determine it I creak and the corresponding frame number to the placed ones.
The problem is that he is accumulated only the greater and not sequencia it.
1803456781101112
1134567810111280
but,80-80
Function ordenar2(Myrange As Range, num As Integer) As String
Dim Myorder As Double
Dim X2 As String
Dim n As Integer
n = 1
Do While n
I have a 2010 Excel spreadsheet where I have a macro set up to print the page. What I need it to do though is to increase a number in a cell and display it each time I print the page.
View 9 Replies View RelatedI have to pay 190000 $ in 180 months. I need a formula to establish an incresing rate for every month. I have a simulation on a paperwork, but I can't figure out the formula. On the paperwork the first rate in the first month is 875,21 $, the second one is 876.99 $, ..., and the last one in the last month is 1258,97 $.
View 5 Replies View RelatedI'm trying to find a formula that increase a cell by 1/3 that will work with auto fill.
For Example if auto-filling a column:
3
3
3
4
4
4
5
5
5
Or if auto-filling a row:
3 3 3 4 4 4 5 5 5
I am doing a hlookup on a range (possibly over 100 rows). My formula is working but my problem is that it takes too much time to go and manually edit the formula to change the row index number and increase it by one. For example the row index number has to change in order to pull in the right data....eg 5,6,7,8 etc up to over 100. Is there a quick way to do this or do I have to manually enter the row index numbers in over 100 rows?
I am attaching a SAMPLE of data. The actual worksheet is much more larger.
Hlookup.xls
I need a series of cells to increase by varying amounts after each month, however this needs to happen automatically so if I send the spreadsheet to someone else, it will update for them automatically. I'm hoping that I can set up a function that will ONLY increase the cells after 4 weeks after they select a date from ANOTHER drop down menu (i.e they select the starting date from cell A1 - then input their starting numbers into other cells which then increase on that same date, 4 weeks later).
The cells that need to increase already have a formula in them as well; as this number is their predicted 1RM based off formulas in other cells.
I will attach a screen shot when able.
My wife and I run an apartment complex with 2 employees, a manager and a maintenance man.
We use excel to produce a paystub for these employees twice a month.
There are a number of variables including incentives for renting apartments, overtime, variable hours in a pay period etc.
We have a separate spreadsheet for each employee and a separate sheet tab for each pay period named for the pay date... e.g. the first paystub had one sheet named "Jan 15"... the next pay period the paystub had 2 sheets: "Jan 31" and "Jan 15". The third paystub had 3 sheets and so on.
The paystubs have a column with the numbers for the pay period and then a column with the year to date sum (for straight pay, over time, federal withholding, social security, medicare, state withholding, etc.)
Right now I edit the formulas for all these sums for each payperiod. e.g. =sum('Feb 15':'Jan 15'!B35) for the third pay period is editted to =sum('Feb 28':'Jan 15'!B35) for the fourth pay period.
I would like to be able to just copy the prior spreadsheet and not have to find and replace values in 11 spreadsheet cells for each pay period.
I have figured out how to get the name of the current spreadsheet to appear in a cell on that sheet using VBA... but not how to get that cell content to be part of the arguments for =sum(. on the formula bar...
I want the first 60 rows of column C to be constant meaning C1, C2, C3, C4..C59 and after 60 rows it should start again with C1, C2, C3.....C59 rather than C60, C61, C62. In other words i+1 but after 60 rows i should be reset to 1 and then again increase by 1. how can i implement these changes
[Code] ......
I'm searching for a macro that will allow me to print rows that are constantly changing in number. Attached is a sample of my workbook. The workbook has worksheets by month. There are data from five sales people on each sheet so each sales person has his own section. I have a print button within each section so he can print only his section of the page. No problem creating that macro.
However, at least twice a week the sales people are adding rows or moving a row of data from one month to another month, so the print area is constantly changing.
I have thousands of phone numbers that hundreds of them are look like this:
123456-8 that means : 123456,123457,123458 or this
123456-57 that means : 123456,123457
There are not any standard of numbers after dash (-) in my data.
how can I expand them to new "rows"?
bob 123456-8 ->
bob 123456
bob 123457
bob 123458
I am doing a hlookup on a range (possibly over 100 rows). My formula is working but my problem is that it takes too much time to go and manually edit the formula to change the row index number and increase it by one. For example the row index number has to change in order to pull in the right data....eg 5,6,7,8 etc up to over 100. Is there a quick way to do this or do I have to manually enter the row index numbers in over 100 rows?
I am attaching a SAMPLE of data. The actual worksheet is much more larger.
I need to conditionally format a cell to:
-return red/yellow/green when the value is below/above or within range of targets but dependent on an increasing or decreasing trend.
If the trend is decreasing and the value is above the target is should return red.
If the trend is increasing and the value is above the target is should return green.
For all there is a Threshold.
For example:
Value Target Trend TrafficLight
(A) 79% 90% Increasing RED
(B) 69% 70%-90% Withing Range Yellow
(C) 85% 90% Decreasing Green
Thresholds:
for example (A) - Red: <80%, Yellow: 80%-90%, Green: >90%
for example (B) - Red: 60-90%, Yellow: 50-60%;90-95%, Green: <50%;>90%
for example (C) - Red: >80%, Yellow: 80-90%, Green: <90%
I have a worksheet where over time I add columns that need to be added in a "Total" cell.
=M3+W3+AG3+AQ3+BA3+BK3+BU3+CE3+CO3+CY3
Above example, the cell being added is 10 columns after the previous one.
Question:
What formula can I use to automatically pull the value from every 10th cell starting with M3?
Preferably every 10th cell till a value I determine... i.e every 10th cell but only for the first 15 occurrences.
(Is this anything to do with the Series command?)
I’m trying to make this:
Amount of money: 1000 (changeable)
Beginning # of units: 0,1 (changeable)
Delta: 200 (changeable)
Rate of decrease: 50% (changeable)
0,1 unit should be added for every 200$ increase (1000+200=1200; 1200+200=1400; 1400+500=1900; 1900+256=2156 etc)
0,1 unit should be taken away after decreasing by100$ (because the rate of decrease = 50% (changeable))
After increasing of 1000 + 200, quantity of units should also increase for 0,1, so it should be 0,2 (1200), 0,3(1400), 0,4(1600)….. Amount of money can increase not only by 200, but for any sum. If that sum is (for example) 500, we should increase by 0,2 etc.
But when this some decreasing we are using rate of decrease (for example 50%, (changeable):
0,4 units – 1600
0,3 units – 1500
0,2 units – 1400
0,1 unit – 1300
I'm facing a charting problem and i can not find any solution with a search here, anyway this is the problem: When I choose a week I would like to see the results of the 5 previous week also.
View 4 Replies View RelatedI have a spreadsheet with a worksheet for each month, so as a new month begins I add a new worksheet using a macro
Each worksheet has 5 columns:
A = Vendor, B = Date, C = Debits, D = Credits, E = Balance
Row 30 contains the totals for columns C, D, & E, cell A30 contains the text Totals
The problem I have is occaisionally extra rows are added so the totals may not be in row 30
Is there any way that the macro can be changed so that it looks for the word Total in column A and then reads the contents of the corresponding cell E? to transfer that total to cell E2 on the next worksheet
I have a listbox on a worksheet which is linked to a named range, the named range is a results from a database query. Now the problem I have is everytime the query is refreshed the listbox expands in size. Is there anyway to stop the listbox from growing thus 'locking' the size??
View 4 Replies View RelatedI'm trying to build a formula to form a price-list. I have some basic prices from a supplier and want to build my prices with a simple rule: the higher the basic price is (column A), the lower my profit margin (in %) should be (column B). Example:
Basic value is $50, my price is $75 (50% margin)
Basic value is $100, my price is $130 (30% margin)
Basic value is $150, my price is $172,5 (15% margin)
And so on...
I forgot most of what I've learned on Excel at my university (long time ago...), so I tried to do it by using simple thresholds, with "if" function:
I've got an excel sheet that lets people choose between 2 choices. I'm using scroll bars to make it easy for them to choose and visualize their preference with as little mouse clicks as possible. The scroll bar is only one sided though, meaning it starts from a min value to a max value.
I would like a scroll bar with a of 0, with the value increasing positively as the user scrolls to the left, and the value also increasing positively as it scrolls to the right.
I would like to have a sheet where there is a cell designated as "start number" (where any number may be entered) and a cell designated as "how many times". I would then like to be able to click a button and excel generates a list of sequential numbers starting from the number designated in the "start number" cell as many times as is designated in the "how many times" cell.
View 2 Replies View RelatedI have a list of jobs being displayed using the following code. All sheet names that start with AJ, CJ and PJ within the workbook are how the list is created.
Sub ListSheets()
Dim sht As Worksheet
Dim lRow As Long
Dim rCell As Range
With Sheet1
Set rCell = .Cells(2, 12)
End With
For Each sht In ActiveWorkbook.Worksheets
Select Case UCase(Left(sht.Name, 2))
Case Is = "AJ", "CJ", "PJ"
lRow = lRow + 1
rCell(lRow, 1) = sht.Name
Case Else
End Select
Next sht
End Sub
what i want to do is create a drop list within each job sheet within the workbook that will display the names of the jobs above. Now the thing is I cannot choose the range like normal from data - validation - list as I will not know how many job names will be displayed so I dont know how many cells to include in the range.
I have to find the union of 2 columns in excel and club those 2 columns into a single column with values in the increasing order.eg: column 1- 0 2 4.. , column 2- 1,3,5.. final result in column 3 should be 0 1 2 3 4 5...plz let me know the code for this that i can run in VB editor(- excel 2007)
View 9 Replies View RelatedSo I am putting togther a process matrix template for a Value stream analysis. I would use brute for and simple tricks to make this work but I am handing it off in two weeks to a student and I want this to be as strait forward and as easy to use as possible.
________C_______D_______E________F______G___
_____Part#1___Part#2___Part#3___Part#4___Part#5
Drill 1___1_______2________0_______3_______0__
Drill 2___0_______3________0_______1_______1__
Drill 3___0_______0________0_______4_______2__
Lathe 1__0_______1________1_______0_______0__
Lathe 2__1_______4________4_______0_______1__
Lathe 3__0_______0________5_______1_______0__
The first worksheet has a list of about 180 machines running vertically, and enough space for 20-50 part numbers to plugged in running horizontally across the top. The next three worksheets have the machines organized and grouped together by processes. I planned to use an Index-Match such as =INDEX('Individual Machines'!D$6:D$194,MATCH("Drill 1",'Individual Machines'!$C$6:$C$194,0))
The goal would be to get the user manually fill in the first worksheet, and then allow the user to use the vertical autofill function to fill in data on the later worksheets. This would provide a flexible template that can be re-used for different and various product families.
So populate something like this with a downward autofill for the number of times the part# hits a machine.
_______Drill 1___Lathe 2___Lathe 3___
Part#1___1________1________0____
Part#2___2________4________0____
Part#3___0________4________5____
Part#4___3________0________1____
Part#5___0________0________1____