I have a 2010 Excel spreadsheet where I have a macro set up to print the page. What I need it to do though is to increase a number in a cell and display it each time I print the page.
View 9 RepliesI've got an excel sheet that has a series of successive numbers down the side from 1-15 per sheet. I've done this by putting the cell formulas as previous row +1. (these are being used as unique reference numbers)
I want to be able to print this out multiple copies of this in one instance without having to manually adjust the first number multiple times then print the sheet. I also want it to be automatically saved as the most recent page printed, so that when it's printed the number continues on from the previously printed sheet.
I found a macro online which I have adjusted to increase a cell by 15 each time it is printed (to change the first number of the row). But I've realised that I'm printing the final page twice if I run the macro again. Is there any way to get round this? If I print 1 sheet there is also no adjustment in numbers.
I also haven't got onto the save part.
This is the macro I am currently using:
"Sub PrintSequence()
'
' PrintSequence Macro
' Macro recorded (altered) 8/16/2005 by Roy Wagner
[Code].....
How to compare two spreadsheets in the same workbook in Excel 2010.
View 4 Replies View RelatedI'm trying to create some vba code that will go into other .xlsx documents, pull all cells with a value in the first 30 columns and then return them as a table. Basically each work crew has a .xlsx spreadsheet containing their schedule and I am trying to bring them all together into one nice little package. If I go to import from external sources then click XML data, navigate to the folder they are in and them click show all files and pick my spreadsheet it imports nicely. Then I go to the next blank cell in column "A" and repeat for the 4 crews. Now I can filter by each crew but all 4 are visible on a single page as a table. I recorded a macro that shows everything I did, but it is not dynamic (the .xlsx source files name changes based on the month) I'm running XP sp3 with Excel 2010
Here is a copy of what I have
Code:
With ActiveSheet.ListObjects.Add(SourceType:=0, Source:=Array( _
"OLEDB;Provider=Microsoft.ACE.OLEDB.12.0;Password="""";User ID=Admin;Data Source=C:Documents and SettingsUSERNAMEDesktopSCHEDULE STUF" _
, _
"FAcrewCurrent.xlsx;Mode=Share Deny Write;Extended Properties=""HDR=YES;"";Jet OLEDB:System database="""";Jet OLEDB:Registry Path=""""" _
, _
";Jet OLEDB:Database Password="""";Jet OLEDB:Engine Type=37;Jet OLEDB:Database Locking Mode=0;Jet OLEDB:Global Partial Bulk Ops=2;J" _
, _
"et OLEDB:Global Bulk Transactions=1;Jet OLEDB:New Database Password="""";Jet OLEDB:Create System Database=False;Jet OLEDB:Encrypt " _
[code].....
Is there a better or simpler way to do this? The tables don't need to be forever linked to their previous spreadsheets so if copy/pasting is a better way than I am all for that as well.
Have very recently been upgraded to Windows 7 with Excel 2010 at work. On printing out a 10 page doucment, (all of which are landscape format), when vewing print preview, the first page is previewed as landsacpe, but subsequent pages are portrait.
If you change format of 2nd page to landscape all subsequent pages switch to landscape.
Have looked at a similar format document created last month and it behaves exactly the same. Whole document landscape but on print preview only first page is...
Excel 2010. I have a workbook that has multiple sheets where some have headers and others do not. Some sheets are static in that no user input is required and others are dynamic so the toal number of pages per worksheet may vary based on how much information the user inputs.
An example:
Sheet 1 is static and requires no input, it does not have a header or a page number. For compliance reasons this sheet must be printed on top of all the other sheets in this policy
Sheet 2 is dynamic. This sheet can range from 2 pages to 5 pages depending on user input. This sheet must have page numbers starting with 1 and it must have a header on page 2 through the last page, but no header on page 1.
I am currently using a worksheet_activate sub to input data into the headers and footers of sheet 2. This works very well and puts the data where I want it to go just by using the "Different First Page" option in the headers design tab.
The problem arises when I select both sheets to print. Excel now thinks Sheet1 is the first page, so the first page of sheet 2 now has a header and the page number beings at 2 instead of 1.
Where I can stop this from happening?
Current sub:
Code:
Private Sub Worksheet_Activate()
' If WS is activated, place information in header
Application.ScreenUpdating = False
'Policy #
[Code] ..........
As I said, this works all well and good for when I'm just printing Sheet2 but when I have to print Sheet 1 & 2 together, it no longer prints the way it should. There are times when Sheet 2 will be the first page of the overall document but there are a few instances where it will be second to Sheet 1 and I run into this issue. Is there a way to specifically reference which headers/footers the code will input the data?
I have a Excel Spread Sheet which has been created, there will be 4 people in 4 different locations who will have access to this spreadsheet and will need to update/amend it through "Dropbox", my question/problem is, how can I link the 4 spreadsheets where information will be updated by one person, but will update all 4 sheets at the same time.
Is this possible and how do I go about it?
First I would like to say that I am not English nor very good to explain myself so hope the title is according to the forums rules. Now to my problem
I would like to to put in for instance the number 100 in cell A and then the number should appear in cell B. I would like to remove the number in cell A without the number in cell B to dissapear. Then add for instance 50 in cell A to get the number in cell B to add up to 150 and so on. How can I do this? I would like to add that cell B is already connected to a different cell. And I am using Vista.
We have just refreshed our entire printer fleet to Xerox printers and as part of the project we have selected all defaults to B&W and duplex.
On a multi sheet excel file, If we click print then choose entire workbook and then change the print options to colour, it prints the only first worksheet in colour, and all the others in mono. i have read that excel treats each worksheet separately and does not cascade the changes made made in the first worksheet even if all sheets have been selected.
How can I get them all to print in colour?
We can set up another printer and change the defauts to colour but we dont want to go down that road and have 2 printers installed for each model.
Is there any code out there can will/ can change the properties of the first worksheet and cascade this throughout the workbook.
We use XP and W7 workstations and office 2003, 2007 and 2010. By the end of the year all workstations will be W7 and Office 2010.
I am using Excel 2010
I have over 800+ pages of chart that only takes up 6 columns and around like 9000+ rows.
I wanted to print this chart on paper and need hardcopies. However, the chart in its current setup prints only on the left half of the page leaving the right half empty.
How do i make use of the full space properly? Each chart has a "page number" on it so I want the chart to print continuously from one half of the page onto the next half and then the second page, third, etc.
Here is a visual demonstration of how things currently are and how i'd like to get them to be:
As you can see, This is the first of many charts and its numbered Page 9 and next one is page 10.
Pic1
How this looks when i try to print, it's only on the left side. right is all blank
Pic2
How i want it to look like upon printing
Pic3
As you can see in the last picture, once page 14 chart has no space it automatically continues chart on right side of page and then moves on to print rest.
[URL]
I have a 2010 version of MS Excel. I have roughly 10000 cells that I need to separate into two columns from one cell.
Here is an example of one cell "John Smith 888-8888".
I am using excel 2007 or 2010.
I need to divide the numbers on sheet 1 column D. This column contains numbers and blank cells so I need to divide by the actual number of cells that contain only numbers. I will be referencing the divided numbers on sheet 2 in a monthly summary format.
I have a cell containing alpha and numeric. I would like to extract the highest number in the cell
the cell looks like this
the answer I would like is
====G99876554321000
9
T1111111100000000
1
I am using Excel 2010
How you can print cells that have a large amount of text continuously on every page (like in an MS Word document)? I have cells that end up with a lot of text, but excel will push the next text heavy cell to the next page leaving you with a few inches of white space on the previous page. Is there a way to just continue the printing of one cell onto the next page to make all the pages even? It takes up extra paper and looks bad when printed...
View 3 Replies View RelatedI have been attempting to cobble together code from different forums for the past several hours to make a macro to unhide a specific number of worksheets based on a cell value, and have failed miserably thus far. Here are the specifics of what I have going on:
Microsoft Excel 2010
Workbook Name: TASERR Model - 06-26-13.xlsm
In this workbook, I have a worksheet called "Input". In cell C21 of that worksheet, workbook users will fill in a number between 1 and 50 (I have the value for that cell limited to those numbers through data validation). Based on the value in that cell (C21), I want to make a macro to unhide that specific number of hidden worksheets. I have 50 hidden worksheets which are named "Route (1)", "Route (2)", "Route (3)", etc.. If the value in cell C21 is 7, I want the worksheets named "Route (1)", "Route (2)", "Route (3)", "Route (4)", "Route (5)", "Route (6)", and "Route (7)" to unhide. If the value in cell C21 is 3, I want the worksheets named "Route (1)", "Route (2)", and "Route (3)" to unhide. I'm sure y'all can see the functionality I'm going for at this point.
I have a problem that when I try to convert text to number and format the number without 2 decimal places as seen on the link I have given below, Instead of 1607.947, I get 1607947. I have Excel 2010 loaded. The details are in below picture.
[URL]
I am doing a hlookup on a range (possibly over 100 rows). My formula is working but my problem is that it takes too much time to go and manually edit the formula to change the row index number and increase it by one. For example the row index number has to change in order to pull in the right data....eg 5,6,7,8 etc up to over 100. Is there a quick way to do this or do I have to manually enter the row index numbers in over 100 rows?
I am attaching a SAMPLE of data. The actual worksheet is much more larger.
Hlookup.xls
My wife and I run an apartment complex with 2 employees, a manager and a maintenance man.
We use excel to produce a paystub for these employees twice a month.
There are a number of variables including incentives for renting apartments, overtime, variable hours in a pay period etc.
We have a separate spreadsheet for each employee and a separate sheet tab for each pay period named for the pay date... e.g. the first paystub had one sheet named "Jan 15"... the next pay period the paystub had 2 sheets: "Jan 31" and "Jan 15". The third paystub had 3 sheets and so on.
The paystubs have a column with the numbers for the pay period and then a column with the year to date sum (for straight pay, over time, federal withholding, social security, medicare, state withholding, etc.)
Right now I edit the formulas for all these sums for each payperiod. e.g. =sum('Feb 15':'Jan 15'!B35) for the third pay period is editted to =sum('Feb 28':'Jan 15'!B35) for the fourth pay period.
I would like to be able to just copy the prior spreadsheet and not have to find and replace values in 11 spreadsheet cells for each pay period.
I have figured out how to get the name of the current spreadsheet to appear in a cell on that sheet using VBA... but not how to get that cell content to be part of the arguments for =sum(. on the formula bar...
I want the first 60 rows of column C to be constant meaning C1, C2, C3, C4..C59 and after 60 rows it should start again with C1, C2, C3.....C59 rather than C60, C61, C62. In other words i+1 but after 60 rows i should be reset to 1 and then again increase by 1. how can i implement these changes
[Code] ......
I am doing a hlookup on a range (possibly over 100 rows). My formula is working but my problem is that it takes too much time to go and manually edit the formula to change the row index number and increase it by one. For example the row index number has to change in order to pull in the right data....eg 5,6,7,8 etc up to over 100. Is there a quick way to do this or do I have to manually enter the row index numbers in over 100 rows?
I am attaching a SAMPLE of data. The actual worksheet is much more larger.
I have a worksheet where over time I add columns that need to be added in a "Total" cell.
=M3+W3+AG3+AQ3+BA3+BK3+BU3+CE3+CO3+CY3
Above example, the cell being added is 10 columns after the previous one.
Question:
What formula can I use to automatically pull the value from every 10th cell starting with M3?
Preferably every 10th cell till a value I determine... i.e every 10th cell but only for the first 15 occurrences.
(Is this anything to do with the Series command?)
simple example.
A1 = 155
I need to print 3 pages where B1 is equal to 50 and 1 page where B1 is equal to 5. A1 may change, but B1 will always be multiples of 50, plus whatever is left over.
Cells L5 - L65 have percentages. B5 - B65 Have the associates names. I want to write something in another cell that looks for the highest percentage and then prints the name as the highest.
View 11 Replies View RelatedRecorded macro. The hope is to insert a excel formatted table a set number of times. I have found a loop code that references a Cell A1 and repeats that amount of times. So if A1= 10. There should be 10 tables inserted. However on the second time there is a fault with the table name. I need the name to change each time the loop is run. ie Table1, Table2, Table3 etc up until the loop stops (A1 contents).
I am using excel for windows 2010. The macro that i have so far is below.
Sub LoopTest()
Dim n
Dim V
Range("A1").Select
V = ActiveCell.Value
[Code] ........
How to select the value from each cell/row from excel sheet and transfer it to notepad and print it.
View 1 Replies View RelatedI need to put a number as a text. It is 14 digits long (35071245130000). If I change it from a number to a text, it re-formats to a scientific number (3.50712E+6).
I can not use the ' in front of the number because it makes all of my vlookups mess up.
The reason I need this changed is because I have a several databases/excel spreadsheets that are being linked through Access. The number is stored as text in the other databases. Because of this, the spreadsheet with the number is not recognizing the number version and the text version as the same.
How to make excel show this full number when formatted as text?
I have Excel 2010. I do not remember having this problem with other versions at my previous employer.
I have to find the union of 2 columns in excel and club those 2 columns into a single column with values in the increasing order.eg: column 1- 0 2 4.. , column 2- 1,3,5.. final result in column 3 should be 0 1 2 3 4 5...plz let me know the code for this that i can run in VB editor(- excel 2007)
View 9 Replies View RelatedI have a report that is generated from a manufacturing process that looks like the example below. the report is 40 pages long when all the data is printed. i am looking for a way to only print this range if a dimension is "out of tolerance". if the dimension is within tolerance, there is always the "garbage" text of plus and minus. if every row is "within tolerance" in the range the cells in the OutTol column would all contain the "garbage" text but it will not always be identical. so, in summary, actual OutTol values = print and all "garbage" = not printed.
NomActDevLoTolUpTolOutTol
Y-0.956-0.9480.008-0.0030.0030.005
Z-1.413-1.4130.000-0.0030.003---*|++++
DIA0.4220.4240.002-0.0030.006----|+*++
POS0.0160.0110.005
I work on a daily basis with spreadsheets in excel. The number of columns is the same, but every single spreadsheet has a different number of rows. I recorded this macro in a table with 1196 rows and I would like to use this macro also in other tables with a different number of rows.
Sub City2()
'
' City2 Macro
'
'
Selection.Copy
Cells.Replace What:="POMPANO", Replacement:="Pompano Beach",
[Code].......
I'm using the following:
B23=IF(A23="","",DATEDIF(A23,I3,"y"))
Where:
A23 = a date of installation
I3 = TODAY()
B23 = a number of years
It currently calculates correctly if the number of years correctly if it's older than 1 year. If under one year, it yeilds 0. I would like B23 to show 1 if the current formula yeilds 0.
I want it to yeild a 1 if the current calculation is 0.
Windows 7 Ultimate / Excel 2010