Adding Comma As Delimiter Before Number In Cell For Entire Worksheet?
Oct 7, 2011
I do receive invoices from my vendors. They send me an invoice in PDF formate. I am using able2extract software to conver the PDF to excel. It is working great but most of the times my vendors enters the items/Case in the description field. Like the example below:
"Bajri Rotla 11 oz.(24)"
I would like to place a "," in between the last character and begining of the first number. In the above case it will be after "a" (in Rotla) and before "1" in (11). If I can do this then I can apply texttocolumn from excel and use "," as delimiter and separate item name from size and case/Pack. Then can use another "Texttocolumn" and separate size and case/pack. If there is a VBA code that can be written for this it would make my life a whole lot easier.
Following are 3 images that I have copied from actual data.
1. Original PDF invoice data that I receive from my Vendor
2. Image of the excel file before formating. This is the format from "Able2Extract" (3rd party software that I use to convert PDF to excel. Works great!!
3. Converted Excel data sheet. This is the way I want to format the data.
I have a worksheet with about 20 columns of info. First of which is a primary key. Call it "Job Number." I would like to create a macro that runs down the list of primary keys searching for a specific Job Number I ask for in the new worksheet, in A1. It then copies and pastes the entire row where it found that job number into the new worksheet starting at row 6.
I found code on this site after searching a long time that has worked well in a larger macro I'm writing for use in Excel 2003 usage. However, I'm stumped on how to achieve the following on the attached sample: find and remove the number in A2 from the list in E2 then count the individual numbers seperated by commas in E2 and post the results in G2 Repeat the same sequence for C2, D2 and F2
I have the following text, in which I need separated into three columns.
Column A) Company Name Column B) Address Column C) Phone Number
I was thinking perhaps I could replace "-------" to just one "-" and use that delimiter to separate the phone number.
Then Use *** Company Name Here *** --> *Number Variable* and filter the rest..
But I don't see it being able to work.Here is the text I'm looking to format (Mind you there is about 8,000 Records. And, it's all formatted like below. (Company Name, phone number being on different lines and phone number being separated by dash's
Is there a way to have a drop down or some sort of input cell that would change the look and format of the entire worksheet? Not sure how to pose the question?? For example.
What I'm working on is a departmental forecast sheet.
I want my department heads to be able to all look at the same excel file, then be able to input or select their department from a drop down. Once the department is selected that would call for excel to bring up the forecast for their specific department (**Each departments sheet is a little different).
Sub Test() For Each Cell In Sheets(1).Range("J:J") If Cell.Value = "131125" Then
This works great except that it pastes formulas. I would like to paste values only. I've tried " PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False" and it gives me an error.
This is an easy one but I suck at Visual Basic... I have a routine wich adds stuff to a header in my worksheet CalcSummary:
Private Sub Workbook_BeforePrint(Cancel As Boolean) With Worksheets("CalcSummary").PageSetup .LeftHeader = Worksheets("CalcSummary").Range("l2") _ & Chr(10) & Worksheets("CalcSummary").Range("l3") .RightHeader = Worksheets("CalcSummary").Range("l4") _ & Chr(10) & Worksheets("CalcSummary").Range("l5") End With End Sub
How can I edit it so that it works the way it is now, but ALSO adds the stuff on worksheet CalcSummary to the header on, say, Sheet1. I've guessed several things - none of which actually work
What I would like to do is do a summary sheet that does a little math. I can make it add but only one row at a time. Here is the general idea...
The fields of the summary sheet are 'PromoCode', 'AdvertisingCosts', 'Labor' for example. And I want to add the currency fields (add, as in math addition) of 'AdvertisingCosts' and 'Labor'.
The fields are on another sheet. What I am hoping can be done is that all those fields for every row can be made to work without having to hard code each one.
Also I would like to have it update with any NEW rows that arise. Like if the existing rows were 'row1' and 'row2' and then some other time 'row3' is added that 'row3' automatically gets included on the summary sheet.
I am trying to add a formula to a defined column in a a table. I get a method range of object error. I previously used the .value and a for loop to enter the forumlas into each cell but I would like to use a different approach. It's basically looking at the compelted column to see if the check box is checked. Here's my code.
Set ntidRange = Application.Range(tn & "[NTID]") Set dtRange = Application.Range(tn & "[Date]") Range(ntidRange).formula = "=IF([@COMPLETED]=TRUE,Login!K2,"""")" Range(dtRange).formula = "=IF([@COMPLETED]=TRUE,Now(),"""")" 'For Each c In ntidRange.Cells 'c.formula = "=IF([@COMPLETED]=TRUE,Login!K2,"""")" 'c.Offset(0, 1).formula = "=IF([@COMPLETED]=TRUE,Now(),"""")" 'Next
i have a question about adding a number to a cell. This is the problem. Each day we track contacts we made in a spread sheet. how could i, lets say type 2 in a cell that already reads 42 and once a tab away from the cell it would change to 44 (add in the background 42+2=44).
I want to create a formula that will refer to the cell I want by adding a number to the cell reference, not to the contents of the cell. For example, lets say that the cell C11 holds a value of 22. I want to add 4 to C11 to get my formula to reference cell C15, I don't want it to add 4 to the contents of C11 which is 22 and would give me a result of 26. I have a large spreadsheet and I can't just fill down the way I have it now and I don't want to have to retype the formula every time.
Im trying to develop a formula that sequentially numbers in column a depending on if there is a value in column B
We have documents at work that have alot of text with random spacing between that needs a sequential reference number so would like the formula to be able to look at the value in column b and if its not blank add a number . I would like this number to be the previous cell above + 1
the formula ive started looks something like =if(B10""), ???????,""
can not get excel to reference cell the last cell above with data.
First I would like to say that I am not English nor very good to explain myself so hope the title is according to the forums rules. Now to my problem
I would like to to put in for instance the number 100 in cell A and then the number should appear in cell B. I would like to remove the number in cell A without the number in cell B to dissapear. Then add for instance 50 in cell A to get the number in cell B to add up to 150 and so on. How can I do this? I would like to add that cell B is already connected to a different cell. And I am using Vista.
I'm prepping this file to be pushed through mail merge. The sheet has 25,213 rows.
Column I contains a long string of character (for the purposes of my project the field is called Subjects) and $ used as delimiters (approx 70 or as few as 1). This column needs to be split apart by $ and the separate Subjects that result from splitting apart by $ needs to be placed on a separate line. Once each Subject is on a separate line, all of the Subjects need to be lined up in Column I, one under another (the obvious result at this point is GREATLY increasing the number of rows in the sheet). Next, all of the data that is contained in each Subject's originating row will be copied to each of newly created rows (without copying over the Subject contained in column I).
After writing this all out, I realize (once again).
I am trying to extract the first letter of each word in a string. The string can contain either a space or a "/" as a separator. e.g. blue green or blue/green. If there is no space or "/" in the string, I need to return the 1st 2 characters.
I'm using the following formula but it is returning #VALUE!
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories:
Requirement: 10358 Title: Customer requirement 1 Text: This describes the requirements for a product for the customer[code].....
The text of the categories may begin in column A or B
What I need is a macro that will search each worksheet for a category, e.g., "Configuration:", copy the row where the keyword "Configuration" is found, and then have that row transposed and pasted to another WorkSheet (e.g., "Extracted Data") cell.
Data extracted from the next Worksheet would begin a new row in "Extracted Data"
Example: Requirement1 Title Text Verification Method-Level ... Requirement2 Title Text Verification Method-Level ... Requirement3 Title Text Verification Method-Level ...
The Requirement# is best extracted from the WorkSheet tab since some of the worksheets are missing this information. I can provide an example spreadsheet, however, I was not able to figure out how do that in this post.
I found a thread similar to this problem:
find and copy row
However, it only finds, copies and pastes for one keyword.
Is there any way to change the decimal point from the usual period symbol (.) to a comma (,). The reason being, i have a structural design spreadsheet and the new terminology is just so, changed from 00.00 to 00,00 I have tried cell formatting but it just uses a comma (,) for numbers in their thousand and it wont do what i need.
I need some direction on how to proceed with dismantling an address cell. I have a workbook that one field is an address label field. What I mean is the entire address is entered in one field just as it would appear on an envelope. I need some suggestions on how to break this apart and create individual fields for the individual parts.
I frequently review DAT files. These DAT files use a variety of characters as delimiters. I'm trying to devise a macro that will perform a text-to-column operation, using the content of a specified cell as the delimiter.
Here's my code, which uses - (ASCII 0254) as a delimiter:
Code: With Sheet1 Range("A1", ActiveCell.End(xlDown)).Select Do
Instead of having the delimiter hard-coded, I'd like my macro to use whatever character I enter into Sheet3.Range("i5") as a delimiter. That way, I can easily change my delimiter character as necessary.