Increment Number From Cell Value Until Another Cell Value Reached
Dec 7, 2012
We need to reach a cell value by using increment of another cell value. But ideally the results will all be in one cell.
Now to make it a little more advance there could be an overhang of the board in A3 which would need to be deducted from the first increment.
Example :
A1 = 5193mm (Lenght of beam)
A2 = 600mm (Width of board)
A3 = 200 (Overhang)
A4 = 400 - 1200 - 1800 - 2200 - 2800 - 3400 - 4000 - 4600 (End Result, The formula wont do the next sum as it exceeds A1)
Of course the vaules of A1 and A2 will vary but that shouldnt make any difference to the formula.
View 9 Replies
ADVERTISEMENT
Apr 5, 2008
I have a value in cell P1 and is always -ve.
This value is calculated by some tedious calcualtion in some other part of the sheet.
By entering value in Cell P2, the value in cell P1 will progress towards +ve number.
What i want is a formula or Macro to increment the value in Cell P2 by 0.01
until value in Cell P1 becomes +ve...
Below is the example of my manual calculation.
When i have
P2=0 P1=-23.58
P2=0.01 P1=-14.78
P2=0.02 P1= -9.30
P2=0.03 P1= -2.92
P2=.04 P1= 1.05
Since i have achieved P1 to be positive, calculation should stop with value in P2=0.04
I have to do this for 31 column and hence manually doing it takes long time
View 13 Replies
View Related
Jan 16, 2008
We have a form that requires descriptive comments to be entered into several rows of merged cells. My goal is to have the form be able to automatically dropped down to the next row of merged cells when the current row of merged cells reaches a maximum number of characters.
And finally, the last row of merged cells would not allow any more characters than the maximum assigned but not advance to another cell automatically.
The rows I am working with specifically are:
Merged Cells F23:R23; A24:R24; A25:R25; A26:R26;...A29:R29
View 5 Replies
View Related
Feb 26, 2014
I have a spreadsheet with 2100 rows. I am trying to fill one column with a numbering system that fills the same number in for 21 cells and then increases by one. For example:
TRIAL WHOSICK?
110TRUE
15FALSE
113FALSE
117FALSE
17FALSE
12FALSE
16FALSE
14TRUE
18FALSE
[code].....
However, I did the first column manually and wish to fill in my "trial" column for all 100 trials.
View 2 Replies
View Related
Sep 7, 2006
I am trying to get my invoice sheet to automatically increment the invoice number when I open the workbook. I know it is in the code i.e. private sub? but it doesnt seem to work.
View 3 Replies
View Related
May 2, 2012
What I'm trying to do is from a template worksheet that I have in a workbook with other worksheets, I'm trying to come up with code that will create a new worksheet based on the template (copy), increment the invoice number, and rename the worksheet tab to be "Invoice # xxxx" (new invoice number from prev. step.).
I have figured out how to use a button on the template to execute, but as I said my VBA skills are lacking to say the least.
View 9 Replies
View Related
Jan 20, 2009
I'm a business/application consultant for ERP software, and generally pretty solid when it comes to excel. However, I've come across a question for a personal sheet that I can't seem to solve.
In my personal budget worksheet, I'd like to set a budget on a cell-by-cell basis. When the budget is hit, I'd like the text color (or cell color) to change.
I.E. Cell D14 has a budget of $200. When I enter $200 in the cell, the text turns from black to red. I've searched through google with no luck. I have mildly searched this forum, but haven't found my direct answer - I have come pretty close though, in other languages
View 4 Replies
View Related
Jan 16, 2008
Is there any code to pop up a message each time a cell value is not reached. For ex if the resulted formula in A1 is less than 0 to pop up a message "LOOSE"
View 4 Replies
View Related
Feb 12, 2007
I want to Freeze my Header Row (A16 to T16) on my spreadsheet but I can't seem to get it to freeze. I wanted to have it freeze when that row reached the Top of the page but all I can do is freeze it and the 15 rows above it. Can one row be made to be visible at all times? I don't think so as I asked this question before but thought I would start by asking it again...
Now my workaround for that was to put the header row at the top of the page as well and freeze it. This works but when you initially open the spreadsheet it look weird because you see a header row on top and one 15 rows below it.
My question is is there a way to hide row 1 until a specific cell becomes active and then the code can undide the row? I want row one to become visible when the user gets to cell A41. Does anyone know how I can accomplish this or do you have any other suggestions for me to try?
View 9 Replies
View Related
May 6, 2014
I have the following Macro to transpose data from a column into succesive rows. I need it to repeat, until it has processed all data in column A / until it reaches an empty cell in A.
Sub Macro1()
'
' Macro1 Macro
'
[Code]....
View 3 Replies
View Related
Nov 18, 2013
I have a number of dates (columns) and under each date there is the demand value (Rows). Also, i have a column that has the current inventory. what im trying to do is to keep on adding the demand in one row (i.e multiple dates) until the sum just exceeds the inventory. After that, i would like to return sum the date at which we stopped adding. the point of this excercise is to see at which month will our inventory deplete according to the demand. Below is an example solved by hand.
Demand
Part #
month 1
month 2
[Code].....
View 9 Replies
View Related
Feb 10, 2011
Currently using LEN to simply count 50 characters then it tells the user that they need to move onto the next line.
Is it possible with VBA that after 50 characters reached in the selected cell it forces the user into the next cell below and so on in a loop?
View 7 Replies
View Related
Mar 25, 2012
I am trying to put a message box related to a cell if a threshold values is reached.
E.g.: Cell A: 85
If cell A values moves to 86 I am trying to put in a message that says something like " This value is not allowed". Is there a way to do this ?
View 8 Replies
View Related
Nov 20, 2011
In my excel workbook, I have a customer table and invoice sheet among many others.
As part of my system, there is functionality to grant new customers with a discount on the first purchase. Within my customer table, the last two columns are "Number of Purchases" and "Customer Type" (either single/multiple depending on no. of purchases), which are then used to determine whether the discount is valid or not on the invoice.
Once an invoice has been created, archived and refreshed with the customer selected (via a Customer ID), I would like some code to auto increment the number of purchases on the Customer table for that specific customer to +1.
For example, customer called Bob (Bob-1);
Number of purchases = 1
Customer Type = Single
Discount = Yes
Invoice then created for Bob (using Bob-1 as the unique value), sent off and refreshed. New figures should be:
Number of purchases = 2
Customer Type = Multiple (can be achieved by using IF statement on No. of purchases)
Discount = No
View 1 Replies
View Related
May 21, 2009
Increment all cells located in Column H up by one (the one above it) cell Except for the header cell (since its the header)(H1),
H2 will always be a blank due to the make up of my database so that will not cause the header to be re-written.
Column H is not an entirely filled column and some cells are empty (if this info was needed in optimizing the code),
Im seeking the quickest and easiest way of implementing this since the database is very large.
View 2 Replies
View Related
Feb 6, 2014
I have a spreadsheet that in column A has someones name, in Column B it has a number.
For example
Column A Column B
Bob Smith 1999
I am looking for a macro that will automatically send an email to this address for example test@test.com, when the number in column B reaches 1200.
I need the email to have in the body - "Bob Smith has reached 1200"
I need this macro to run against 20 sheets in my workbook.
View 4 Replies
View Related
Aug 7, 2012
Im struggling how to even start writing this code. What im trying to do is go down column S from row 2 down and sum up each cell until the sum = 700 then delete all the rows below that with some thing in them.
View 2 Replies
View Related
Oct 20, 2006
I would like to click on "B1" (making this a button) and have it add "1" to blocks "B9" and "C9". Both blocks would start out with "0". I would need it to add in sequential order everytime I clicked on "B1". Basically, when I open my document the very first time, "B9" and "C9" will read "0". When I click on "B1", they should then read "1". Then next time I click "B1", they should read "2", and so forth.
View 5 Replies
View Related
Mar 14, 2013
I have a table... One of my cells is called Capacitors and the number of the cell is 202600. This is the default value. How can i increment this value?
For example:
I have capacitors in one cell with this value => 202600.
But I want to put capacitors in another cell and i want the value to be 202600 + 1 => 202601
Another cell with capacitors with 202600 + 2 => 202602
And so on...
Capacitors.JPG
View 6 Replies
View Related
Oct 31, 2008
How do I increment a cell by 1 when data in another cell is changed. In other words...I am logging phone calls made. When I enter the date I made a call I want a cell labeled "times called" to increase by one.
View 9 Replies
View Related
Sep 29, 2005
How do you get a value within a cell to increment, by say, 1, for each and
every worksheet within my workbook?
For example, the value in sheet1 in cell A1 is 100
in sheet2, I input...= 1 + 'sheet1'!A1 in cell A1 (value now is 101)
then, in sheet 3, I input...= 1 + 'sheet2'!A1 in cell A1 (value now is 102)
then, in sheet 4, I input...= 1 + 'sheet3'!A1 in cell A1 (value now is 103)
etc.,etc.,etc.
How can I input a formula...then copy and paste it into my sheets without
having to go to each and every worksheet to input the formula?
View 9 Replies
View Related
Feb 27, 2012
iam clicking on A6 than that show in that cell 2
if i click on b3 it will show 3 and so on
View 2 Replies
View Related
Apr 24, 2014
I'm a structural design engineer and I want to develop my own spreadsheet to calculate required area (mm^2) of reinforcement bars in concrete to avoid concrete cracking due to temperature rise in summer. Available input are min area of reinfor (cell A3), crack width limit (A1) and calculated crack with (A2). For example.....
A1= Crack width limit 0.2mm. A2= Calculated crack 0.28mm (which is higher than the limit 0.2mm; therefore min area of reinfor A3= 1450mm^2 is insufficient to stop concrete from cracking). Now......to stop cracking, I want cell B1 to take 1450 from A3 and keep increasing it until the condiotn A1>=A2 is met and I want cell B1 to display that increament( lets say 1780mm^2). I hope you do get what exaclty I want to do in excel
I don't have much experience in Excel so I don't know anything about Macro/VBA coding etc. Can we do a simple thing like this B1=IF(A1>=A2,A3,somthing here to keep adding a value to A3??) OR do we have to give pragamming code???
If it has to be Macro/VBA, complete coding with an instruction where to write it.
NB: There are several calculations done with manual inputs within the sheet to derive the A2 (0.28mm) value
View 9 Replies
View Related
Nov 17, 2006
I currently have a Macro which increments a cell by 1, as follows:
Sub Up_One()
ActiveCell.Value = ActiveCell.Value + 1
End Sub
Sub Down_One()
ActiveCell.Value = ActiveCell.Value - 1
End Sub
How do I amend this so the selected cell 'goes to' cell A4 before carrying out the macro above?
My employees keep forgetting to click in cell A4, and the macro will simply increment whatever cell you're in at the time of click...
View 4 Replies
View Related
Nov 24, 2006
Im trying to write a very basic macro that will let me increment a cell value from 0 to 20. in this instance im trying to make cell a40 change from 0 to 20 and im trying to make it increment by 1 every time and then go back down from 20 to 0. In this code i need to be able to see the changes happening as i will be showing the incrementation on a graph.
View 2 Replies
View Related
Dec 15, 2006
I am working on a Loop, I have most of it working except incrementing the cell.
I have this,
PartN = Worksheets("Parts").Range("A3").Value
then the loop. what I can't figure out is I need for A3 to increment by one row until the loop is done. i.e. loop runs as A3, then A4, then A5 etc.. until the specified number of the loop is reached (which is basically the number of rows I have)
I tired something like
Dim CellN As Variable
CellN = "A3"
Do Until xxx
PartN = Worksheets("Parts").Range(CellN).Value
then before the Loop statement at the bottom I put
CellN = CellN + 1
but I get a type mismatch error
View 3 Replies
View Related
Sep 11, 2007
I am experimenting one way to solve one problem, but to do this I have to Name some cells with some values, thing that normaly in VBA is symple but I have never done before in coding. May be my problem is because what I am doing is not valid with the vlookup but if you can take a look to my file. The problem is that when I run the Macros the Named Cells are totaly out of place...
Sub Lookup()
dercell_unit = Range("C65500").End(xlUp).Row
Range("B" & dercell_unit, "E2").Select
Set Rango = Range("B" & dercell_unit, "E2")
For i = 2 To dercell_unit
Names.Add "VALrsa", "=$C" & i
Names.Add "RESOLdds", "=$D" & i
Cells(i, 7) = Application.VLookup(Cells(i, 2), Rango, 4, False)
Next i
End Sub
View 3 Replies
View Related
Sep 26, 2007
I have figured out how to get the average. My next problem is getting the dates to increment. I want the time and date to go as follows: 07/12/07/9:00 then 07/12/07/10:00 ...... 07/12/07/23:00, 07/13/07/0:00 like this.
View 7 Replies
View Related
May 2, 2008
I need to add or subtract a specific amount daily from a sheet with little or no manual intervention.
View 9 Replies
View Related
Aug 7, 2008
I've created a sheet that I would like to place a check number in say cell C4 and set this number to start at 1001. Now when I select to print 20 pages for example I would like the Cell C4 to equal 1001 for the first page and then page 2 in C4 have the number increase by 1 to 1002 and so on.
If I could figure out away to use the header/footer &[page] command on my worksheet I would be all set but I can't seem to figure how to use that outside of the header/footer.
View 7 Replies
View Related
