I am just looking for a way to use the find function but only to display results that end in what I am looking for. For example i am trying to find a sequence of numbers/letters that end in a. If I do a find it displays results for anywhere there is a . in the sequence. I would like just the ones that end in the.
I have a series of text - domains actually (i.e. goldintre.cr.usgs.gov.) - and I need to extract the text that appears before the first period in one cell, and the text that appears after the first period. Both have to be without the periods. So in the above example the result should be 'goldintre' in one cell and 'cs.usgs.gov' on the other.
why when a column is copied do blank cells no longer become blank. i have a macro below that writes data to a column based when cells are balnk it skips them. it works great except for when you copy a column the cells are no longer blank.
Sub RET_DATA() For i = 1 To rs.Range("L65536").End(xlUp).Row Lastrow = Range("A65536").End(xlUp).Row Cells(Lastrow + 1, 1) = rs.Cells(i, 17) Next i End Sub
How to modify a custom cell format to make data entry easier.
My goal is to have the output look like this: 'A12B-C20D: SET 10: Text string here'
Inputs needed are:
1-3 digit number between A & B 1-3 digit number between C & D 1-2 digit number after SET Text string of variable length
Where I am stuck. So far I can get "A12B-C20D: SET 10:" to show up properly when 122010 is input. The custom format I am using looks like this: "A"##"B-C"##"D: SET "##": "
When I try to incorporate the "@" symbol the first part of the formatting goes away and the output shows up as "122010 Text string here".
I have tried: "A"###"B-C"###"D: SET "##":";;-;_@ "A"###"B-C"###"D: SET "##": ";;@ "A"###"B-C"###"D: SET "##":";_@ "A"###"B-C"###"D: SET "##": ";;;@
I have created a form that will be used my many people. The first person will enter their information and click a button to transfer their data to a second workbook, as well as send the workbook via email. At a later time, someone else will add more data to the emailed form and transfer this to the database in the second workbook. What I need is to be able to find the row in the second workbook containing the data transferred the first time and add the data that was put in later to the same row as the original.
I need to replace a full column with a certain word. It needs to start at a specific cell and needs to replace the full column until it hits an empty cell. I can't do a find and replace because the words in that column are all different words.
For example:
I need it to replace all of column F starting at F2 with a specific word and it needs to keep replacing until it hits an empty cell.
My workbooks have a column of state names that I need to replace the names with abbreviations. I am doing it manually with the Replace (Ctrl+H) right now, and it's very time-consuming since I'm doing it with numerous, large workbooks. I would be very grateful if there's a quicker solution. The state column is always the same (I). The states are United States and Canada, but I could edit if there's an existing solution from a different country, or modify a simliar work-around.
Could you tell me how I can find a specific sentence within a cell that contains many sentences.
for example
I want to find, "I am new." within a text that contains, "Hello I am Bob. I am new. I live in england."
I am currently using =+FIND(AB$1,$V2) where AB1 contains the sentence I am looking for and V2 contains the cell full of sentences. However this returns #VALUE! when the sentence is not found. I want it to return null.
how to allow both these codes to work on say sheet 1. I can get one to work just fine. So, any tips on how to get them both to work on the same sheet would be great.
Private Sub Worksheet_Activate()
End Sub
Private Sub Worksheet_Change(ByVal Target As Excel. Range) With Worksheets("Sheet1") If Not Application.Intersect(Target, .Range("n1:n200")) Is Nothing Then If Target = "S" Or Target = "s" Then Target = "Submitted" If Target = "A" Or Target = "a" Then Target = "Approved" If Target = "I" Or Target = "i" Then Target = "Investgating" Else End If End With End Sub
We have a spreadsheet in use at the moment which has various lines of information, each line has a customer name, id, request and various other bits of information which needs looking into.
The infomation is arranged onto weekly sheets and is managed manually. Once the customer request is complete, we grey out the background colour. Some outstanding issues background colours are either left blank, yellow or red, depending on whos doing them.
I was wondering if there is a search criteria that we could use that would search through all the sheets in the workbook and find any customer queries that are not greyed out and display them on the results page.
I have an Excel spreadsheet with 3 columns (A, B, and C) and 600 rows. Each cell in A and B contains a 6-diget number. Column C is empty.
I want to determine whether the number in A1, A2, ….A600 appears anywhere in column B. If A(n) does appear in column B then I want to enter a symbol (say a Y) in C(n). If A(n) does not appear in column B then I want to enter a different symbol (say N) in C(n).
What is the formula I enter (and where) that will do that?
On a multipage user form, a combobox control allows the user to select a value from a list, which automatically populates textboxes with other fields from the same list. This works perfectly. I tried to set up another combobox that would work in the same manner, but referencing an entirely separate worksheet and returning the appropriate values from that list to its related textboxes. My problem is that both comboxes are automatically populating ALL the textboxes, ie combobox1 returns the correct information in its related textboxes, but also changes the information in the textboxes related to combobox2. Combobox2 does the same in reverse. I can at least see and understand why this is happening - the combobox code for both is telling ALL textboxes with numerical tags to update.
Private Sub cmbPAYERefFirst3Digits_Change() Dim rFoundSource As Range
I am looking to produce a formula that shows if a number is "found" or "not found".
I have list of over 1000 numbers in one column (1 number per row) . I am trying to identify if those values are present in a range of numbers from another worksheet(also in a single column). My challenge is that the range of numbers that I am looking in has multiple values, separated by commas in a single cell. Looks like it was from an Access data dump.
I have a worksheet that contains thousands of patient appointment entries, there are more than one entry with the same patient details contained in the worksheet. For example; sometimes a patient will reschedule a appointment, this causes another entry to added for the new appointment. When the patient attends this appointment, the appointment status changes to Seen. But the original entry still stays Rescheduled. This there a way that we can look for identical infomation in some selected columns that match the original entry but have different infomation in some other columns:
E.G. The cells in columns A,B,C,H have identical infomation than the original entry but the cell text in column D equals to "Checked" or "Cancelled" and the cell date in column G is higher than the original entry date. If the result is true then tag the original entry as Invalid
changing two variables a various amount of times and running the same procedure and copying the resutls into another sheet. Seems like a perfect place for a macro. However, these variables can be chosen from a list that the user wants. So why not build in a listbox for each one. Now I have two listboxes one for variable A and one for variable B.
The procedure in theory goes something like this we change variable A from the base case and then run the procedure for variable B, get the results, then run the scenario again but changing only variable B abnd repeat. Then once, all of the variable B scenarios are done, I want to change the variable A and then repeat and so forth.
That is the background and my main problem at this point, is that have these values in two listboxes, I know how to do the for each loops and such, however, I do not know how to do them for values in the listbox.
How do I identify the values selected in the respective listboxes and then pull them so I only use them for the for each loop?
I have a list of over 300+ email addresses. If there is a way that I could pull out the ".com" (Find & Replace: Which is not working in any format, Text, Custom, General.) then pull out the text from the right to left until I get to the "@" into another cell and drag that down that would make it so much easier. Is there a formula that will pull data and then stop at a CHAR code? @ =CHAR(64) These email addresses are all different lengths. (personal to corporate email addresses.)
Example: moe10134@hotmail.com
Looking for something like this: Replace ".com", =LEFT(9) or whatever will take out the "moe10134@" and the ".com" leaving only hotmail.
What I'd like to do is copy text down in column A but when a cell in column C says something like 'end of data' I'd like the copy to pick up the next row in Column A and copy down until 'end of data' and so on.
Or maybe copy text down in Column A until the text changes in col A.
i run a Excel spreadsheet that adds payments that are made, and i have a row put there so i can make notes. sometimes these notes are quite long and if the cell to the left of it is empty the text will continue going across these cells and make my spreadsheet a real mess to understand. how do i make text stay only in it's given cell?
I have been working on different formulas to return the text string between the first and last space and have been unsuccessful. Is this possible?
I have tried several combos or Left and Right, I have been able to get the values after the first space, and the values before the last space, but not between the spaces.
String: Y60 ~C CULT NUCLEUS 3X2 SPRING WST BK XL
Desired results: D60 CULT NUCLEUS 3X2 SPRING WST BK
I'm working on a text prediction project classifer model and would like to remove the stop words before I stem the document to get the important topics.
I found the thread that Stanley solved really useful. However, I have a lot more stop words that I'd like to remove, which I couldn't make work with the previous code (I'm completely new to this!)
I have a simple macro that copies data from worksheet to another. I only want this macro to be run once per day by the user. One of the cells that gets copied is the value found in the formula "=today()". My thought is that the macro could look for the existance of the current date in the pasted data (meaning the macro has already been run once today), and if the date = today, then a message pops up warning the user that the macro has already been run once today, and ask if they're sure they want to continue.
Any easy way to accomplish what I'm attempting to do? The current date gets pasted into a worksheet name "PriorDay" in cell C5.
In a userform i have created an textbox. The user types some text in it and after clicking an OK-Button this text must be copied to a cell To allow multiple lines (enter = new line in textbox) i have changed the textbox property EnterKeyBehavior to True. The problem is that after copying this textbox1.text to a cell in see square blocks in the cell.
line1[] line2
instead of line1 line2
I use the following code to copy the text into a cell:
Private Sub CommandButtonOK_Click() Dim TextboxText As String TextboxText = TextBox1.Text ActiveCell.Value = TextboxText Unload Me End Sub
how to avoid this [] (should be like alt-enter in a cell)