Is it possible to keep ending zeros in cells that are formatted for Text or General?
I have a column with numbers like the following: 264400
I need to format this number for three decimals so it will look like the following: 264.400
I need the column to be formatted for either Text or General. Currency breaks a system.
excel formula to keep leading 0's in a cell. ex: "0069" to 0069, "000123" to 000123 and so on.. Attached file for the same.
View 3 Replies View RelatedI use the first six numbers of a SA Identity number to calculate the age of a person as these six digits are actually the year (yy) followed by the month (mm) followed by the day (dd), I am born 01 September 1962, and therefore my first six digits are 620901.
Assume the figure 620901 is placed in Cell A1
Now, in another cell, say A4, I have a future date, but this value is formatted as dd/mm/yyyy. Assume this value to be 01/10/2017.
Firstly, I'd like to know How old I AM at that date and secondly, just because I am battling so, how old I will be on my next birthday, because adding the figure 1 to a total has never been so useless - it just doesn't work! I tried adding all sorts of numbers for months and days in a year but there was no consistency.
So here is my question: Simple - how do I get this to work?
On 1/10/2017 I will be 55, or turning 56 At Next Birthday. I have the following function that gives the answer of 55, but not 56 ANB even after 1 additional year is added to the function (the cell is formatted as yy):
Cell A6 Function = A4-DATE(LEFT(A2,2)+1900,MID(A2,3,2),MID(A2,5,2))
Also, ON my birthdate, 01/09/2017, it says that I am 54, and it has to be wrong because I would have turned 55, unless the function uses time and not just the actual date somewhere. On the next day it does, at least, see me as 55.
how to add calculate what my age will be AT MY NEXT BIRTHDATE for any given date in A4?
Below is a sample. I was given a spreadsheet and it contains fractions formatted as General. I need to do a calculation based on the fractions. Example there is a number in A1 lets say 3 and a fraction formatted as general in a2 1/216 and I need to multiply A1 * A2 but obviously I get a value error. If I go to another sheet and format the cell as a fraction then the multiplication works. My spreadsheet is full of the general formatted fractions.
A1321/2163Â 4Â 5Â 60.0138888897Â 8#VALUE!Spreadsheet FormulasCellFormulaA6=(A1*1/216)A8=A1*A2
I have a set of data that has a company name using commas to separate INC and LLC from the company name. e.g. Acme Explosives, LLC
I'm using Excel 2010, and when I try to use the find/replace functionality to find commas, I get an error message saying "We couldn't find what you were looking for. Click Options for more ways to search.
Short of editing all the fields manually (only about 300, so not too bad), I'm hoping there is a simple way to replace these commas with nothing.
Here's my problem. I need a formula to take the decimals out of a column but keep ending zeros. I have tried find/replace & several formulas but nothing seems to be working. Here is an example of the numbers in the column and the end result I need.
9.66 966
0.50 050
13.09 1309
309.98 30998
I have some data in a column, starting at row 6 that I'd like to find the number of unique text values for. For this I have been using this formula
Code:
{=SUM(IF(FREQUENCY(IF(LEN(A6:A10000)>0,MATCH(A6:A10000,A6:A10000,0),""), IF(LEN(A6:A10000)>0,MATCH(A6:A10000,A6:A10000,0),""))>0,1))}
The data is dynamic so I picked an arbitrarily large number (10000) and the above formula successfully ignores blank fields.
However, I'd like to now find the count of unique text values that end in X. For example, let's say the data are as follows
Dog_Cat
Mouse_Dog
Mouse_Cat
Mouse_Cat
Mouse_Cat
Mouse_Mouse
Elephant_Elephant
How would I go about (in one function) finding the unique values that end in "_Cat", in this case 2 ("Mouse_Cat" and "Dog_Cat")?
I have a whole number in cell C2, but i am formatted it in Cell C3 to always have leading zeros combined with the number in Cell C2, where the result will be 8 digits long. example, my number in cell C2 = 572 but i need it formatted to be 00000572, but if the number was 19 it needs to be formatted to be 00000019 and so on.
View 2 Replies View RelatedI have a spreadsheet where i do need to count cells values that are formatted as text but i do need to ignore the real text in some cells, in this formula i do need to add values depending of the adjacent cell.
I have attached a example : New Microsoft Excel Worksheet.xlsx‎
I have a series of conditionally formatted cells which turn the text in them to red if the value is less than 40. This works fine.
Occasionally however a value of less than 40 will need to be entered along with the letter 'v'.
ie. 39v
I'd still like this to be coloured red, but it's obviously coming out as black.
Is there a way to sort this out?
edited to add : Im actually using a separate cell to enter the value 40 (as the value can change).
I have a series of worksheets that are formatted for data imported from various scripts.
What I want to do is parse through each worksheet and cell, when the cell has numeric data, I want to clear the cell.
I do not want to clear the cells on the following conditions:
Cell has Text
Cell has Formula
Cell has date, month or time
I'm trying to make an excel formula that generalizes product names based on their format. So the general format would be XYZ08/T13. I know a ? is equal to a general letter, but is their a symbo that specifically means letter or number. I'm running into problems using the ? because the formula ends up identifying additional items that are not products as products.
View 9 Replies View RelatedI need to be able to open or import a csv file and have the data be seen as text, not numbers. I can export programming from a phone system as a csv file, modify it and import it back into the phone system. some fields such as "seconds" are in the format 00. Excel sees it as a number and converts it to 0, which causes an error when I try to import again.
I have tried changing the csv to txt and copying it to a blank worksheet and then recording a macro using text to columns, but each export can be laid out differently, so a fixed array doesn't work. there can be over 100 columns so doing it manually and changing each column to text can be quite tedius.
I am trying to find a way of replacing a whole amount of data, over 1000 items, initially each cell contains this >>> 056001 Not Set, I am trying to remove 'Not Set', but the big problem I am facing is that Excel also removes the leading 0 or zeroes, when it finishes removing ... I tried several things, like changing the column to Text, and then paste the data from another column, because I read the Text format is preserved, nothing, as soon as the column is pasted it changes back to General, if I change it back to Text again, and then apply a Search and Replace, each cell is changed to 56001, which is not what I intended, the only way I have seen it works is if I manually remove the string, then it works and is changed into the text format and number as text, as I intended to
View 1 Replies View RelatedI have a group of cells in E2:E4 that are 144.00 in, 240.00 in, and 72.00 in and are formatted as general.
I get these values when I export data from an AutoCAD program to Excel and I want to sum these values to get the total length.
I want to sum the three values and have the result be the same (i.e., ###.## in). The number of values can go to 30, so I need a simple line of code, =SUM(???)
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
I have a procedure that allows me to view and make changes to data in a table. I list the current values for the item in one column and use simple formula to copy that value to another column where if there are changes that need to be made, the formula is simply overwritten. The Macro is then selected using a command button and the formulas are all overwritten using copy/paste values to keep from writing out the formula to the data table. These values are then all written back to the data table, current values are overwritten with whatever is in the update column, new data or old data.
I have one cell out of 48 that has decided to march to the tune of a different drummer. The format changes from General to Text and the formula written from the macro is what shows up in the cell instead of the value of the formula. Never a big disciplinarian, I have to wonder if I have been too lenient on the cell and this defiance is the price I have to pay.
The sheet is protected only allowing entry into the cells available for update.
Here is the bit of code that affects this cell (starting from a format of General:
Code:
Sheets("Product Data").Cells(ItemRow, 3).Value = Sheets("Update").Cells(6, 8)
Sheets("Update").Cells(6, 8).FormulaR1C1 = "=(RC[-6])"
I just don't see anything that would change the format, and these are the only two lines that even reference cells(6,8).
I tried to set the format for the cell from within the Macro, but with the sheet being protected, it just dumps me out to my error message.
I am just looking for a way to use the find function but only to display results that end in what I am looking for. For example i am trying to find a sequence of numbers/letters that end in a. If I do a find it displays results for anywhere there is a . in the sequence. I would like just the ones that end in the.
View 2 Replies View RelatedHow to modify a custom cell format to make data entry easier.
My goal is to have the output look like this: 'A12B-C20D: SET 10: Text string here'
Inputs needed are:
1-3 digit number between A & B
1-3 digit number between C & D
1-2 digit number after SET
Text string of variable length
Where I am stuck. So far I can get "A12B-C20D: SET 10:" to show up properly when 122010 is input. The custom format I am using looks like this: "A"##"B-C"##"D: SET "##": "
When I try to incorporate the "@" symbol the first part of the formatting goes away and the output shows up as "122010 Text string here".
I have tried:
"A"###"B-C"###"D: SET "##":";;-;_@
"A"###"B-C"###"D: SET "##": ";;@
"A"###"B-C"###"D: SET "##":";_@
"A"###"B-C"###"D: SET "##": ";;;@
I have recently found that when I copy ranges (usually containing formulas), I only have the option of copying these ranges as text ( or vales). I can no longer copy formulas , (or formats, col width etc) in my excel worksheets.
This problem has only recently occurred and applies whether i have one or many spreadsheets open.
How I can deselect the selected cells before ending the macro. Ihave a workbook containing about 40 sheets, and need to clear the same cells on 31 of them. I have attempted to define a name for the range, and actually got it to work once, however it ceased working on the second attempt, and I don’t know why. I have therefore gone back to the original code as posted below.
My questions are a) how can I deselect all the cells and b ) how can I use a defined name for the range so that I can use something like clear contents and not have to select the cells?
(I have also cleared all unlocked cells previously, but I have some unlocked cells in the other sheets I do not wish to clear).
Subnewmonth()
' newmonthMacro
IfMsgBox("This deletes all data, do you wish to continue?", vbYesNo) = vbNo Then Exit Sub
Sheets(Array("1","2", "3", "4", "5", "6","7", "8", "9", "10", "11","12", "13", "14", "15", _
"16", "17","18", "19", "20", "21", "22","23", "24", "25")).Select
Sheets("1").Activate
Sheets(Array("26","27", "28", "29", "30","31")).Select Replace:=False
[Code] ..........
I have written below code
Sheet1.Cells(1,2)=Shett2.Cells(2,1)
and my sheet1 cell has a value which is bolded and after running above code the sheet2 cell is displaying unbolded value
how to copy the format as well
Is it possible to sum cells that contain numbers converted to text? I used TEXT function to convert them because I needed to format them (to display three decimal digits, if number < than 0.05, three digits otherwise). But now SUM Formula doesn't work.
View 4 Replies View RelatedI have two columns with entries consisting of numbers. I'm trying to match between the columns but some names dont match because of the formatting.
Example
065 matches 065 (I have that green triangle on the cell that indicated "The number in this cell is formatted as text")
However 120 doesn't match with 120 (only one of them have that green triangle)
I tried to format all the cells as text at it seems the match only works when the green triangle is available. The green triangle seems to only show its self when I double click on the cell. I have thousands of entries so that doesn't work. I also tried to use the "Text to Columns" but it coverts entries like 002 into 2 which I dont want.
I want to be able to "count" apples and oranges. Is there a way to record a particular text in a text formatted cell and count it. e.g. 10 cells, 3 say "apples", three say "oranges", 4 say "plums". I want excel to keep track of the three types of fruit when I change them and give me a running number of each.
View 2 Replies View RelatedI want to find strikethrough text and replace it with blanks. In my sheet there are cells that contain both strikethrough and normal text. I tried using the 'Find and replace' tool, specifying the format. I've attached a picture with the settings from the Replace window.
The problem is that Excel finds the cells that contain strikethrough text, but replaces with blank ALL the cell content. I would like to replace only the strikethrough text from the cell and leave the normal text as it is!
I have a graph that pulls data from a toggled list. Values include currency, percentages and general numbers. The data is set up as text to report as currency, percentages and general numbers. Is it possible to have a graph read these text values?
View 1 Replies View RelatedI am in need of a formula.
I am subtracting one number from the other and if the result is negative, “Short” otherwise “Add”, I want to use subtracting result in the formula. So for example A1 has 50,000 and A2 has 40000 so the formula in cell A3, should say add $10,000.
Or something like this, =IF(A1-A2>0,”ADD”,”SUBTRACT”,”&TEXT(A1-A2,”$#,##0.00”)
The solution below to look up numbers in an array formatted as 10 characters as text.
=VLOOKUP(TEXT(A1,"0000000000"),LOOKUPTABLE,2,FALSE)
This has worked well except now I have received the data and the text I want to lookup has been reformatted (previously leading zeros) to the number with trailing spaces, still a total of 10 characters but the above formula no longer works. Is there an easier workaround other than using "Find" to locate the position of the first space.
I had a hard time to put a suitable title to this query, not sure if above is good enough for my query. I am entering combination of text and number in a cell using a formula. I am wondering if it is possible to add formula which can format number such that it is displayed in accounting format. Example:
Expected output = Trial 1,000
Using this formula
="Trial "&Sheet1!A1
where A1 in Sheet1 = 1000
Output is Trial 1000
