Indicator Variables And Calculating Differences Between Numbers In A List
Jun 8, 2009
I got three columns. The left one is the day number. The middle column is for indicator variables 1 or 0. This is suppose to be chosen by the solver function. I want the third column to show the DIFFERENCE between the "chosen" days. This can be better explained through an example:.......
(extra information: the indicator values are chosen by solver based on several criteria not stated here, but this particular part of the sheet is suppose to refrain the chosen days to have differences between them larger or smaller than a given value.
I have a volume of liquid made from beer and glucose. I know the specific gravity (SG) of beer on its own and glucose on its own and I know the volume and SG of the mixture. What I need to calculate is the volumes of beer and glucose that make up the mixture.
Volume SG
Beer
0.998
Glucose
1.350
[code]....
And by putting figures into B2 and B3 that add up to B4 I can eventually find the numbers that multiplied with their SG and added together equal E4, as in the spreadsheet above. Is there a formula from the information on hand that can just tell me the volumes of beer and glucose that were used to make the volume of mixture at that SG?
Within 4 columns, I have a series of: Start Dates / Start Times / End Dates / End Times I need to create a formula which will give me the sum total of the difference between the data sets.
For example, the time difference between 8am on the 20th March and 1pm on the 21st March is 29 hours OR 1 day and 5 hours. I need a formula which will calculate this for me.
I've got a list of numbers and want to show the difference between the highest number and each of the other numbers. Here's an example: (The first column is the position, the second column is the number and the third column is the difference.)
What I am trying to do is calculate a particular charge based on two main variables the city and weight chosen (each of which will correspond to a particular value) .I have these cities and weights which correspond to a particular price per 100kg when two are selected
My excel data is set up like this
(A).....................(b)......................(c)..................(d)........................(e).........................(F) .......................Weight..................0-999Kg.............1000-1999kg..........2000-4999kg..........5000-9999kg 1. City 2. Toronto....................................$5.50..................$4.00..................$3.75..................$3.50
(I added a,b,c,d and 1,2,3,4 for reference when explaining the formula)
I have a separate row where I am able to enter a weight in one column (A24) and and choose the city from a list in the second column (B24). I need the next column (C24) to display the dollar charge per 100kg from my data that corresponds to the city I have chosen and the weight entered. I am trying to figure out a formula for C24 that allows for instance $5.50 to be displayed when I type in 800kg for A24 and choose Toronto from a drop down list in B24. This row will look like this for reference:
..................A............................ B..............................C. ..................Weight..................City..................Charge per 100kg 24...............800..................Toronto..................$5.50
When we buy company 1 we need to import all of the products into our product database, however many of them are already the same. Each product has a manufacture code, and a supplier code. Company 1 uses 1 code for each product but it could be either a supplier or manufacture code - they don't use a consistent standard.
My company has a list of all supplier codes and manufacture codes for each product. I need excel to compare the 2 companies lists and check if any of the products in their list are in my company's lists. I need excel to make a new list of any products from company 1 that are not already in the company 2 product list. The products that are not already in my list will need to be looked at manually, and so need to be easily identifiable after the matching (ie in their own list or the ability to copy into a new list.
How to generate a list base on the differences of another list. let me explain; I have a list of combination A1:F2200 each row of course the numbers have difference, example:
I have included a small example file. What I would like to do is compare column A - Code on -CORP REC - on first sheet, with column A -code -SUPR REC on the second sheet. Then compare the differences and insert them into the third worksheet - discrepancy -Column A- Code and Column B Name.
Also is it possible to convert all the uppercase names on sheet one to lowercase as I would like the discrepancy sheet to names to be in lower case.
If other threads list exactly this I apologize. I am not really good at using others for adaption. but I can try if you want to direct me
I would like to be able to compare the "standards" in Column A with the Assessment status in Column B and the Assessment period in Column C in order to generate a compact list in another workbook (ideally) or tab (if not). A list might typically contain all the standards that have been M (mastered) during a given Assessment period. I realize that filters would achieve this to a large extent but I was hoping to automatically populate another worksheet or tab.
I recorded a macro to perform a graphing operation which will be used in a For-Next Loop which will run eight times. I need to modify the “ range” portion of one of the recorded lines to allow the graphing data to be dependent on variables I have set up as integers. See the applicable part of the recorded code below.
Dim firstrowno As Integer Dim ltcol As Integer Dim lastrowno As Integer Dim rtcol As Integer
‘code which sets the values of the above variables Is Not shown
I am trying to write a function that will compare the text of cell "A2" to the text of cell "B2" and display cell "A2"'s text characters that didnt match from cell "B2" in column C. Can anyone help me out with writing this formula?
I am starting a project that will involve finding how old people are using the difference of two years. Cell A1 will contain the function that automatically obtains the current year from the PC clock (or a manual input). Cells B1...B6 will contain text (names). Cells C1...C6 will contain the month of their birth. Cell D1...D6 will contain the day of their birth. And cells E1...E6 will contain the year of their birth. Cells F1...F6 will have the formula to calculate the difference between A1 and its respective cell column E.
The only functions I know are =(TODAY) which does not give me just the year. Also, I do not know how I would be able to do the calculation [e.i., =(TODAY) - 1988].
I need it to cycle through whole numbers for three variables whose range I can define. I need this macro to test the result of all possible combinations of A, B and C, as is shown in the attached file. The initial range boundaries for each variable are as follows:
VariableABC Minimum1408 Maximum510012
So the macro should start with the following combination (1,40,8) then (2,40,8) then (3,40,8) etc until it reaches (5,100,12). I need the results for each combination to be posted at a separate sheet next to the corresponding combination.
I have a file with a number of variables and wanted to know if there is any way to print out the list, from say the locals window or somewhere else. Empty values are fine, I'm just trying to compile a listing for our external documentation.
I have 8 items in a drop down list that all have the same variables that i've listed on a separate worksheet. I want to select one item from the drop list and then have only its variables appear. And then when I change the item from the drop down list all of the variables will update for that item - and have them displayed always in the same cell.
I'm using Excel 2002 and looking for a way to get rid of the red comment indicator in entirety. While I get that it's not possible there appears to be a workaround which I took off the Contextures website.
Sub RemoveIndicatorShapes()
Dim ws As Worksheet Dim shp As Shape
Set ws = ActiveSheet
For Each shp In ws.Shapes If Not shp.TopLeftCell.Comment Is Nothing Then If shp.AutoShapeType = _ msoShapeRightTriangle Then shp.Delete End If End If Next shp
how to store the variables selected in a list box for future use in the macro?
I've got code as follows:
This is in my main module
'These set up the global variables Public SelectedRegion As Variant 'I've also used string Public NewTabName As Variant 'I've also used string
'This links the list box to the values in a hidden tab named "Regions" and shows the form WSForm.RgList.RowSource = "Regions!A1:A10" WSForm.Show This is in my coding for the form itself (list box & buttons)
'Code for my "Cancel" button Private Sub cmdCancel_Click() Unload Me End Sub
I have an Incomes & Expenditures spreadsheets. When I add an expenditure to the sheet I can choose which category of expense it is from a drop down list of expenses. At the lower part of the sheet away from main section I have a list of the categories which I would like to have monthly totals alongside. with the formula?
I have a sheet with work tasks on. Column I shows the completion date for each project. In column J I would like an automated response linked to todays date. Can we use row 2 as our example? So I need in this case cell J2 to show the following:
- If todays date is more than 5 days before the completion date (in cell I2) I would like the cell J2 to show "IN PROGRESS"
- If todays date is less than 5 days before the completion date (in cell I2) I would like the cell J2 to show "AT RISK"
I have a table with employees' persinal data including birthdays. My aim is to insert an indicating field that would show whether the birthday is gonna come soon.
It shold have several states:
number of days left if the birthday is current or next month "not soon enough" if the birthday will come in more than 2 months (later than next month); "happy birthday" if it is today; "the past weekend" if it was the past weekend and it is Monday today.
I have a macro that takes quite some time to run, 3-4 minutes is it possible to have a % progress indicator in the status bar to let me know how much of the process has been completed so far?
