I have a macro that takes quite some time to run, 3-4 minutes is it possible to have a % progress indicator in the status bar to let me know how much of the process has been completed so far?
View 5 RepliesI want to use a msgbox as a progress indicator for a routine in an application. I cant figure out how to do this.
View 5 Replies View RelatedI have a sheet with work tasks on. Column I shows the completion date for each project. In column J I would like an automated response linked to todays date. Can we use row 2 as our example? So I need in this case cell J2 to show the following:
- If todays date is more than 5 days before the completion date (in cell I2) I would like the cell J2 to show "IN PROGRESS"
- If todays date is less than 5 days before the completion date (in cell I2) I would like the cell J2 to show "AT RISK"
I am using the following to import a text file w/ ~86000 lines into Excel: ...
View 9 Replies View RelatedI’m trying to implement a progress indicator into my spreadsheet. I used John Waltenbach book, but I’m not able to get it up and running.
Basically what I’ve got so far is a user form which appears directly when the spreadsheet is open....
I want to put progress indicator for data input in Excel.
The data input is in cell A1 until A10, and B1 until B10.
So, I need two progress indicator (for cell A & B).
I have a macro that calls 3 other procedures during its run. I have the positon set in the UpdateIndicator sub
With ProgressIndicator
.Top = Application.Top + 300
.Left = Application.Left + 400
end with
and the Userform StartUpPosition property set to 0 - Manual (though I did experiment with the other settings as well.
The issue is that when the series of subs are running, the Indicator jumps and shifts (by 10 or so pixels down and right) and sometimes blinks off completely as each new sub is being called and subsequently returns to the initial macro.
It is accurate and does what it's supposed to do, I just find it annoying and that it probably looks a bit unprofessional (and unstable) to the eyes of some coworkers who use the macro as well.
is it possible to show progress indicator if macro execution take some considerable time say more than 10 seconds?
View 2 Replies View RelatedIm forgetting how to code something for this ....
View 7 Replies View RelatedI have a macro that calls the Calculate event. My problem is that the workbook is rather big and so the calculate takes some time. The user cant see the Status bar as I am working in full screen mode and useing Userforms that fill the entire screen.
I want to be able to display the progress (eg: Calculateing 35%) to the user.
Is there any way that a macro can "read" this info from the statusbar or from somewhere else?
I have been looking for a macro (and have failed to find one) that would give a progress bar in status bar as a percent of the macro run time, e.g
If I had a macro that took say 5 minutes (which I would know in advance) to run is there a way to have a progress bar in status bar that would progress incrementally as a percentage of the 5 minutes or even simpler break the 5 minutes into 1 minute increments?
I have a query around dates and current project status.
I1 Contains the Current Date
C4 Contains Due Date
C5 Contains 4 Possible Selections. Not Started, In Progress, Awaiting Feedback,
Complete
What I want the formula to do is.
IF Current Date is greater than Due Date AND Current Status is either Not Started or In Progress then return Overdue.
I've written it as follows, but it doesn't seem to work?
=IF(I1>C4,IF((C5="Not Started",IF(C5="In Progress"),"Overdue",""),""))
I have some vba code that currently copies a status table out of a worksheet, into a temp file for an email. The status table in excel has a column D which can have different status. I want to select everything in the table except rows that are 'Descoped'. Currently my code looks like:
Set rng2 = Sheets("Execution Status").Range("B2:F420")
This picks up everything without looking at the status. I want to change it so it doesn't pick up the rows where Column D contains 'Descoped'.
In pseudo code I would describe it as:
Set rng2 = Sheets("Execution Status").Range("B2:F420") where value in D5:D420 is not equal to 'Descoped'.
I have tried:
Set rng2 = Sheets("Execution Status").Range("B2:F420").Value "Descoped" and nothing gets selected.
Im consolidating datas from muliple excel files to single data base excel file.Am having macro and it is working fine for me.But when am loading data to data base file the excel files are vibrating.To avoid this issue i want to Set the progress bar which should indicate the progress of the data loading.
View 12 Replies View RelatedI'm trying to create a userform with a progress bar. The progress bar does NOT need to be 'real' and accurate, but simply act as a timer to illustrate to the user that the program is running some quick calcs.. Again, basic progress bar, with about about a 4 second completion time..
(using excel 2010 VB)
In Excel 2003 the Status Bar is missing. I know to go to Tools, Options, View to view and hide the Status Bar however as i cannot see Tools (as Status Bar missing) is there another way to get the Status Bar back?
View 2 Replies View RelatedFrom time to time, the status bar in excel 2010 is not showing (I don't mean the information is not showing, I mean the bar is not there at all). In previous versions I would go to view>status bar...
how do I get the status bar back in excel 2010?
i want to know how to show the progress of code exceuted in an excel sheet. like when we download a file from web or server it shows the staus of the file transfer.
View 2 Replies View RelatedUses excel 2010 to track the project in the form of project status report. Basically it has to look simple yet tracking should be in the form of progress bar etc.. Our aim is to track a 3month project.
View 1 Replies View RelatedI have a macro that runs through about 40,000 records which can be quite time consuming. I currently have a status bar that shows the percent of work complete, but I'd like to add something that shows an estimate of how much time is remaining and how much time has passed. Below is the first loop in my code that uses the progress bar. You'll see that I modified the progress bar to include "Label 2" which shows the current record of the total record count, I'd like to add "Label 3" to show something like "2:30 elapsed, 1:15 remaining".
I'm using Excel 2010 on Windows 7 (64 bit).
HTML Code:
Sub IdentifyGS()
POData.Activate
For CurrentRow = 2 To LastRow
[Code] .......
I'm working with a file from SharePoint (FileA), "FileA" goes out to Sharepoint and opens "FileB" (if not already open) then copies information from "FileA" to "FileB". However if "FileA" is left open, or someone else has it open I am unable to open "FileA". How in VBA can I check to ensure I don't have it open locally (if so swich and continue), checkout and open in SharePoint (if not already open) or Prompt with options to force checkin, checkout to copy info?
Simple VBA copy I used:
Workbooks.Open FileName:= _
"http://sharepoint.baaa.com/sites/SCDT_DSD/Weekly_Releases/11.%20Combined%20Weekly%20Task%20List/1/Automated_Status_Update.xlsm"
Sheets("1").Select
Range("A1").PasteSpecial Paste:=xlPasteValues
Is there a way to count the times a loop has occurred and be able to present a running total in the status bar of MS Excel?
Code:
Sub Master_Phone()
'
' Select cell A2, *first line of data*.
[Code].....
I am having with Excel 2007.
When I hover the mouse over a cell with comments, the status bar displays a message; for example "Cell A12 commented by A satisfied Microsoft Office user".
I only get this message for one column. The cells in all other columns give my first and second name as the author of the cell comment.
Why it is only effecting one column. I have been unable to change the annoying "commented by A satisfied Microsoft Office user" to my own name.
Is there a macro that can do this? I tried two macros I found online, both from a few years back, but neither of them worked.
I'm using Excel 2002 and looking for a way to get rid of the red comment indicator in entirety. While I get that it's not possible there appears to be a workaround which I took off the Contextures website.
Sub RemoveIndicatorShapes()
Dim ws As Worksheet
Dim shp As Shape
Set ws = ActiveSheet
For Each shp In ws.Shapes
If Not shp.TopLeftCell.Comment Is Nothing Then
If shp.AutoShapeType = _
msoShapeRightTriangle Then
shp.Delete
End If
End If
Next shp
End Sub
I have a table with employees' persinal data including birthdays. My aim is to insert an indicating field that would show whether the birthday is gonna come soon.
It shold have several states:
number of days left if the birthday is current or next month
"not soon enough" if the birthday will come in more than 2 months (later than next month);
"happy birthday" if it is today;
"the past weekend" if it was the past weekend and it is Monday today.
What can you suggest?
I don't know if this can be done. When i put on an autofilter in a spreadsheet, and I filter on a particular column, the autofilter arrow is highlighted in blue to show that I have filtered this column. Is there anyway I can change the colour of this indicator from blue to say red?
View 3 Replies View RelatedI am trying to have a Number Line representing age of retirement.
I want to have a cursor on it Positioned on the number line which will move to desired age as I change the value of Cell representing Age.
Can this be done on Excel. I think so. Using User form or any thing like that will be ok as I need it for presenting a report.
I work for a farm where we receive fresh produce from harvesters daily. I created a workbook with worksheets(ws) for my daily inventory counts according to product type and separate worksheets for each day of the week showing the orders shipping for that particular day.
I collaborated the data from the inventory count ws and the ws for each day into one ws called Harvest. I am trying to figure out how to keep a running total of what needs to be harvested vs. what is in inventory so that I can show my harvesters what new product is needed to fill orders for today forward, after subtracting what is available in inventory, and showing the amount shipped for past days . Another part that's throwing me is that harvest brings in new product daily and sometimes they bring in a surplus.
Here is an example:
Lets say today is Tuesday and my Inventory ws shows we have 50 kale in inventory - cell D10
Monday ws shows an order for 50 kale, cell D14
Tuesday ws shows an order for 100 kale, cell D14
Wednesday ws shows an order for 100 kale, cell D14
Thursday ws shows an order for 100 kale, cell D14
On my Harvest ws, Since today is Tuesday, how would I keep the Monday cell showing 50 kale as the amount shipped on Monday, Tuesday cell showing we need 50 kale to be harvested to add to the 50 in inventory and fill the order of 100, Wednesday cell showing that we need 100 kale harvested, and Thursday showing that we need 100 kale harvested?
If Harvest brings in a surplus of 100 kale on Tuesday so we have 100 kale in inventory on Wednesday how do I get the Harvest ws to now show that Monday cell should still show 50 kale shipped, Tuesday cell should show 100 kale shipped, Wednesday cell should show that we don't need any kale harvested since we are using the 100 surplus in inventory, Thursday cell should show we need 100 kale harvested.
I've a long list of value with indicator which I need to compare with an entry after which it need to return a text indicator. I'm using IF and MATCH function.
Following is the code I use:
=(IF(MATCH(C1,$D$5:$D$29,0)<=5,$E$9,IF(MATCH(C1,$D$5:$D$29,0)<=10,$E$14,IF(MATCH(C1,$D$5:$D$29,0)<=1 5,$E$19,IF(MATCH(C1,$D$5:$D$29,0)<=20,$E$24,IF(MATCH(C1,$D$5:$D$29,0)<=25,"Not Found"))))))
I've attached an excel file with an sample. Btw, Is there anyway I can omit the length of IF & MATCH function by using other function.
I got three columns. The left one is the day number. The middle column is for indicator variables 1 or 0. This is suppose to be chosen by the solver function. I want the third column to show the DIFFERENCE between the "chosen" days. This can be better explained through an example:.......
(extra information: the indicator values are chosen by solver based on several criteria not stated here, but this particular part of the sheet is suppose to refrain the chosen days to have differences between them larger or smaller than a given value.