I've got a list of numbers and want to show the difference between the highest number and each of the other numbers. Here's an example: (The first column is the position, the second column is the number and the third column is the difference.)
1 - 20
2 - 18 - 2
3 - 15 - 5
4 - 14 - 6
5 - 11 - 9
I got three columns. The left one is the day number. The middle column is for indicator variables 1 or 0. This is suppose to be chosen by the solver function. I want the third column to show the DIFFERENCE between the "chosen" days. This can be better explained through an example:.......
(extra information: the indicator values are chosen by solver based on several criteria not stated here, but this particular part of the sheet is suppose to refrain the chosen days to have differences between them larger or smaller than a given value.
I need to find the difference between 2 excel spreadsheets. They both have the same columns.
View 10 Replies View RelatedI have columns of black data that I manually go through and find regions that have cells with values that are 0.06 or more different.
I then turn these regions into blue colored regions.
Is there any way you can design a macro that goes through the spreadsheet and FILL COLOR YELLOWs a cell who is 0.06 or more less then the next cell down?
This would be so much easier on my eyes, since I usually have 80 columns and 1500 rows of data.
The blue coloring I still have to do manually because my human instinct is sometimes important there.
I would be using the FILL COLOR YELLOW cells as quick markers for my regions of interest.
I have taken over this spreadsheet for my work, and it is basically a statement in excel. What I want to do is find a list of invoice numbers in column B populated from a remittance, and then replace column F to say a specific thing depending on check number and date paying for that invoice. So if a check printed today I would have it replace column f to say paid 1/31/13 check # xxxxx. Currently I am searching for each invoice indivudually and then replacing with check number and date. There are about 200 invoices per month that I deal with, and it is a big waste of time!
For example from this
invoice #1 / reconciled (DATE)
invoice #2 / reconciled (DATE)
To this:
invoice #1 / paid (DATE) check # (xxxxx)
invoice #2 / paid (DATE) check # (xxxxx)
I am trying to find the median of a set of numbers on a column that correspond to dates on the left column. I want a monthly median average of the numbers on the right which correspond to the dates on the left. So for example. I want to make an equation that gives me the median of all the numbers on the right if they fall within the range of a certain month(in this case October). I've tried These:
=IF(COUNTIFS(A:A,">=10/1/12",A:A,"
I am looking for a formula that will find the lowest 5 number group in column A with a total value from column B under $100 in the below table.
1 $28.75
2 $28.00
3 $27.75
4 $24.75
5 $25.50
6 $25.25
7 $25.25
8 $16.50
9 $24.75
10 $26.50
11 $24.50
12 $27.00
13 $26.50
14 $23.50
15 $23.00
16 $19.25
17 $20.75
18 $25.00
19 $20.50
20 $20.50
21 $17.75
22 $22.50
23 $20.50
24 $19.75
25 $20.00
26 $10.75
27 $11.25
28 $5.25
29 $13.00
30 $9.00
I have been given a task to compare a set of the current months employee records to last months employee records. The goal is to a) find employees who are still in our group but may have changed managers b) find employees who are no longer in our group and c) find employees that are new to our group. Once this information has been compared between the two workbooks, it needs to be exported to a new spreadsheet that needs additional columns added for formatting in order to import the new spreadsheet in a tracking tool.
For example, last months spreadsheet includes the tracking tool ID column and has a row for each employee. For an employee that is currently with the team they would need the tracking tool ID to be put in the newly generated spreadsheet. Additionally the current employee might have changed managers and that needs to be updated. A new column needs to be added to the new spreadsheet that shows that a current employee is "Active". For employees that are new to the team they won't have a tracking tool ID because they are new but would still need to be considered "Active". And for the employees that have left the group, they would also need the tracking tool ID from the old employee record but would need a column that would mark them "InActive" since they are no longer with the team. My last step is that I want to add a column called "Team" that would iterate through each employees managers and assign them to a specific team based on the manager that they have.
My general idea has been that I need to loop through all of the employee names or numbers from this months records for comparisons to the names of employees from last months records. Once a match has been found I need to copy the entire row from the current months to the new spreadsheet. That way I will get the latest info or "row" for a current employee and that would also handle finding if they have a new manager. Next I need to pull over the tracking ID from the last months records, create a new column called "Status" and make the employee "Active" and create a "Team" column showing the team.
For employees that are no longer on team, I need to copy the whole row from the latest employee records, pull over the tracking ID from the last months records, update the "Status" column and make the employee "InActive" and populate a "Team" cell showing the team. And lastly for the new employees, I need to copy over the row from this current months spreadsheet. They wont have a tracking ID (It will populated when the Excel file is imported in the tracking tool) and I need to update the Status column to "Active" and also provide their "Team". After the new spreadsheet is generated I am done. The file can be imported. And the next month I need to kick off this script again.
I have two lists of data as below, and I want to find a match after excluding "Ltd" or "Limited"
example
If Cell A1 is "ABC Limited", and Cell B1 is "ABC Ltd"
This should show as a "match", otherwise it should show error.
I am using the following code which works in microsoft 2002, but not in 2000. When I run it in 2000 it says " Named argument not found." The debugger highlights the line Set C through delete.
Sub DeleteRows()
Dim c As Range
With Worksheets("Sheet1").Range("A1", Worksheets("Sheet1").Range("A" & Rows.Count).End(xlUp))
Do
Set c = . Find(What:=" ", After:=[A1], LookIn:=xlValues, _
LookAt:=xlPart, SearchOrder:=xlByColumns, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False)
If Not c Is Nothing Then c.Resize(12).EntireRow.Delete
Loop While Not c Is Nothing
End With
End Sub
I have data like this,
Member
chr
location
web
1
50000
[Code]....
Now i want to select member column values based on the differences in values between members of location column should be 50000, it means if select web then my next selection should be SEB because next value (i.e web + 50000) is 100000 and it is matching to SEB in members column.
expected results
web
1
50000
[Code]....
i had a worksheet in which i had a column Named Cheque No. i want to print the missing cheque no's in a series of cheque no's.The logic here is that there will be different series of cheque nos for different transactions.Just check out my worksheet.
View 9 Replies View Relatedis there an IF formula to compare values in two columns, say Column A and Column B have "Action recommended" and column B has "Actual action taken", both columns should have the same texts, in cases where there is no similarity, the formula should count the cases.
View 3 Replies View RelatedI'm developing a spreadsheet for a nonprofit that provides feedback on their major fundraiser/auction. I'm trying to create a formula in a cell that will look at the bidder #'s in column B and add the value of the their purchased items found in column C and return the number of the bidder that has the largest total value of purchases.
This can be done with a pivot table and give a table of all bidders, their total amount paid for items, and the number of items purchased.
I need a function or VB code to parse through a column of numbers and find a repeating pattern. The column has some initial numbers that do not fit the pattern and I need those returned along with the repeating pattern.
I am trying to calculate Change for following set. The Calculate field below shows how to arrive at the change. Any logic that I can use to get to Change? Match AccountID and find change in Value from Wk =1 to Wk= 2 without using pivot table option
Wk
AccountID
Value
Change
Calculate
[Code]...
I am using excell 2007 and 2010
I need to find the average numbers on sheet 1 column D. Column D contains numbers as well as Blank cells. The info will be presented on sheet 2 in a monthly view. In other words i need to ssearch awithin a date range and determin the average of those numbers. This works on some months but return a DIV/0 erro most of the time.
=AVERAGEIFS('2N Stats'!$I:$I,'2N Stats'!$E:$E,">=2/1/2011",'2N Stats'!$E:$E,"
PART 1
- A record is created
- The record is modified once/several times
- Only the original record and the last modified record needs to be kept
PART 2
- The differences between the original and the last record need to be highlighted in the spreadsheet.
- This has to be repeated for a whole bunch of rows
Currently I am manually deleting the rows and eye-balling the changes. I'm using Excel 2002. I have ASAP Utitilities as well. Although macros are cool, I was hoping I could try with an Add-in or software.
There are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
I have two columns of numbers (this week - Column A and last week - Column B). What I need to do is look at the numbers and pull two lists out in Columns C and D. In columns C a list of the numbers that are missing from last week in column D numbers that are missing that were added from the previous week. The two lists consist of about ten thousand rows of data.
******** language="JavaScript" ************************************************************************>
Microsoft Excel - Book3___Running: 14.0 : OS = (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp
(A)boutA1=ABCD1This WeekLast WeekMissingAdded
21002103110311002310271032103210274103310331034104051035103410361055610371036
165571038 81040 91055 101655 Sheet1 [HtmlMaker 2.42]
I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
This is what I need:
Columns B, C, D & E are all populated with 3 digit numbers.
I would like column F to automatically populate with any of the 3 digit numbers that share two numbers, i.e.
F2 might look like this (using 00 as the pair):
001, 040
F3 might look like this (using 01 as the pair):
701, 051, 110, 001, 120
F4 might look like this (using 12 as the pair):
123, 721, 281, 912, 112, 120
etc...
Say column A has either numbers or text in each cell, I need a macro to only get each number in each cell that is not a duplicate of a number in any previous cell and list each number found down column B.
View 5 Replies View RelatedThe first 7 digit number is the input to a certain equation. This equation outputs the 7 digit number after the space.
Input (7146127) ==> Equation ( Unknown) ==>Output (2871082)
These are some data that I have ( inputs and outputs). I was wondering if there is anyway to find this equation. I can get more data if that helps in finding the equation.
71461272871082
53820056426572
61070709150530
75833373805331
55466908456008
49264716615511
12387558353260
20013928484175
67975657084961
38006283229553
68973249414920
65179634653276
66971872613128
59646203411273
69785611400836
58284602307740
64723009925464
57930863495088
58816593932906
62736335606616
52119154778580
60043359437317
61921553996320
51507747216899
13197956063818
64210347411256
65399671193442
55656585589500
55148886441637
30850639587521
69081133766387
54139417804940
53408393698534
62310293191095
30512556590168
14514168265124
89078208134056
85177364363577
68714858216023
17584065849687
52691521917548
9840524785846
59268687494601
89374963791119
45989738961270
65040033345415
15061518946940
55392084949214
45103824265242
84181944909073
I have a column of variances, these contain both negative numbers and positive numbers. I want to gather a sum of all the negative numbers and positive numbers separtely. Basically saying all the positive overeages = this amount And all the negative shortages = this amount. you can see the attached sample.
View 3 Replies View RelatedI want to delete rows in whole list and numbers of rows to be deleted I have in for example C column. How to do it?
View 9 Replies View RelatedIs it possible to delete a column of numbers then replace those numbers from adjacent columns and the adjacent columns are then filled with the numbers adjacent to them
View 9 Replies View RelatedI'm working on a spreadsheet with about 400 rows and 10 columns. All the numbers in the columns are formatted as text, which doesn't allow me to use AutoSum. I have selected the cells and formatted them as number with no decimals, but AutoSum still doesn't work because the formatting hasn't changed and they're still formatted as text. I know if I double click each cell, the cell changes the format from text to number, but that will take a lot of time to change 400 cells in each of the 10 columns. What can I do to quickly reformat the cells from text to number?
View 1 Replies View RelatedI'm trying to pull some numbers from another column. I want to pull the numbers that have an X separating them like 7X125, 48X192, and 27X90.
Example:
FA, VF-2000-3-7X125-18-A, AFS
FA, VF-2350-48X192-6-RGB, FC
FA, VF-2020-27X90-18-A,RFI, FEX, ACP, 2IT
These telephone numbers have changed so I want to add new numbers to the numbers in column with red color
View 3 Replies View Related