I have a workbook with a "master" sheet which contains all the data required and has "sub" sheets which segregate the data into different categories, What I need to do is input data on the status of the row in the sub sheets and save it to the related cell in the master worksheet, Is this possible or would I have to do a copy & paste macro?
View 5 Replies
I want to be able to see the average rating for each employee.. Is there a way to put in the rating from one survey and have it automatically add it another cell and then have it clear the first cell?
Here is an example of what I would like to do: Say we get 2 surveys with one rating of 5 and one rating of 10... If I input the 5 into cell Q4 and have it automatically put into cell R4 and then it gets deleted from Q4 but saved to R4... and then I can add the rating of 10 to Q4 and it automatically ads it to R4 and clears Q4 and totals R4 to an average of 7.5.
This way, with each new survey I can just input each rating to Q4 and have it cleared for the next rating and then have an average rating of all the surveys in R4... we do not need to keep track of how many ratings we are getting, just the average rating.
I have attached the excel sheet if you would like to take a look at what I am trying to do..
I have a excel sheet in it. Is it possible? That when in any cell I input data in a cell and press "enter" then it save automatically.
View 8 Replies View RelatedI'm wondering if it is at all possible to have a cell comment automatically update depending on what data is input in the cell (via user input, VLOOKUP, etc.)?
For example, if cell A1 contains the text "CHARLES" with a comment saying "Employee of the Month", and is then subsequently updated with the new text "JOHN" (again, via direct input, a VLOOKUP, data validation, etc.) is there a way to have the comment automatically update to say something else, such as "Team Lead" for example?
I've considered using VBA to accomplish my goal, but am unsure how to compose an effective code to do so. I've also considered perhaps creating a named table filled with all the different comment possibilities I would like to have used in this cell and then inputting a formula in either cell A1, or the comment contained therein, that would then call the corresponding text from that table based on the data in cell A1. Honestly, I'm not sure that what I'm trying to do is even possible;
I have a spreadsheet with 5 columns. A1 to A5
Entries are made into columns A2 to A5 but only ever one entry across all cells
If an entry is made into A2 to A5 the I need a "P" to be placed into A1
I am trying to create a macro which gives me an input box. I need to enter 2 numbers into the input box. It would be as follows:
Input Box Msg 1 - "What is your labor cost?" (NUM1)
Input Box Msg 2 - "What is your productivity rate?" (NUM2)
Then I need the macro to take this info and enter it into a formula which changes according to the row which you are on. (I need the macro to work based on which ever cell I currently have selected). The formula would be this if I currently had a cell on row 10 selected:
=(NUM1*(NUM2*$H10))/$H10
So, if I currently had cell L10 selected, and I ran the macro and put 100 in for "NUM1" and 10 for "NUM2" and my sheet had 20 in cell H10, then the macro would enter the number 1,000 into cell L10. If I had L500 selected, then the macro would enter the final number into cell L500 based on what value H500 contained.
I would like to know if it is possible to transfer values of cells this way?
I've attached the excel file for easier reference.
I am just starting to get my feet a little damp with VBA and I am trying to make a macro that will act whenever any text is entered in any cell within a 3x3 square. Whenever any text is entered in any of those cells I would like it to enter a text ( "X" ) in a cell which is specified by a cell in the spreadsheet (this cell will output which cell the macro should write the text in in this format "A:1" or "C:3"). How can I make the program act only in reaction to the user entering thier text, and also, how can I get the macro to read A:1 and enter the text into that specific cell? Any help would be so awesome, the book I have is really difficult to navigate.
View 9 Replies View RelatedI am working in both 2003 and 2007 Excel.
This is a simplified version of my worksheet:
I have two cells, A2 and B2. When I enter a numeric value into B2, I want it only allowed when certain text values are in A2. I.E.: Allow any value in B2, but only if A1 is either "SYDN or "ADEL".
Now using info found in an old post, I can achieve this with a combination of data validation and code:
=OR(A2="SYDN",A2="ADEL") for the validation and for the code:
[Code] ......
The only problem is I also need to reset B2 if A2 changes to invalid data as a result of some other input to that cell (A2). In other words if B2 is showing "1" already and A2 were to change from "SYDN" to say "LOND", then B2 needs to be cleared. If A2 changed to "ADEL" then it doesn't need to clear but it is ok if it does because it is fine to re-enter "1" into B2 again.
I have attempted to attach a sample worksheet : Xl0000003.xls‎
Macro Based on an input cell’s (e.g. B12) setting of “yes” or “no”, format several other cells (e.g. B20:G20, B23:F23, C26:J26) as follows: keep the existing yellow shading if input cell is “yes”, change to grey shading if input cell is “no”. I would like this macro to run automatically whenever the input cell value is changed.
View 2 Replies View RelatedI get a text file daily for routed deliveries containing a barcode, name, address and phone number that I convert into csv and then upload it into a route optimization software. after optimization is complete it has assigned packages to drivers and I export it to excel and print. My sorters are having a difficult time reading the addresses on the packages and assigning them to the proper driver, so I am trying to come up with a way.
My idea is that I can import the barcode as a custom field into the route optimizer and then when I export it, that barcode field will still be associated to that order. I want to scan the barcodes of the package into column C which will reference all of the barcodes in B and when it finds the match, it will return the value in A, the driver assigned to that particular package. This way my sorter will just have to scan the packages and throw it into the proper bag for the driver instead of having to visually scan the printed manifest to match.
I'm trying to work out the way of having a cell give a result based on what has been input into two other cells.
Basically I'm doing up a risk management spreadsheet. I need to have in one cell the LIKELIHOOD of an incident, in the second cell, the CONSEQUENCES of it happening and ending up with a RISK MANAGEMENT ASSESSMENT in the third cell.
I want to tie the values of some cells on Sheet 2 to what's put in into corresponding cells on Sheet 1. Example
If Cell B3 on Sheet 1 has the string "B off" put in, Sheet 2 should automatically get "R1" in cell B12, "B off" in cell C12 and "ID123456" in cell D12. If cell B3 on Sheet 1 is empty, B12:D12 should be blank.
I have two coloumns on a worksheet. In the first column I have data validation drop down list. I want to be able to: if the first column "Other" is chosen then the next cell will allow text for description, if anything other is chosen in the first drop down list cell then I want the next ( text for descritption ) cell to be resticted.
View 4 Replies View RelatedI have Quote Master.xls open
I have a value in AA1 that carries a number
I want to open Quote Log.xls
I want to find the cell in Column A (Quote Log.xls) that AA1 (Quote Master.xls) directly corresponds to
I want to offset from that found cell 3 cells to the right and insert from T7 (Quote Master.xls) into this offset cell. Here is the code so far
Private Sub InputIntoQuoteLog7_Click()
Dim CostSheetBook As Workbook
Dim QuoteLogBook As Workbook
Set CostSheetBook = Workbooks("Quote Master.xls")
Set RFQQNumber = CostSheetBook. Sheets("RFQ").Range("AA1")
Set RFQQStartDate = CostSheetBook.Sheets("RFQ").Range("T7")
Workbooks.Open ("\ACT3ENGVAULT EngineersLsheriffDocuments (2008)Quote System MashQuoteLog.xls")
Set QuoteLogBook = Workbooks("QuoteLog.xls")
Set vOurResult = .Find(What:=RFQQNumber, After:=[A1], _
LookIn:=xlValues, LookAt:=xlWhole, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False).Offset(0, 3)
vOurResult.Value = RFQQStartDate.Value
End Sub
I get an un-numbered error on the .Find
If any text or number is added to a specific cell then a letter "P" is entered into another predefined cell.
Example:
Cell A1 is normally empty but if a number or text is added to cell B1 then a letter "P" is automatically placed into cell A1.
I would like to auto populate a cell (A2) due to the input results from another (A1).
For example, if I enter A1 with "100%" then I want A2 to auto populate with "Complete". And just the same for other percentages; if A1 was input with any range from 1% to 99% it would populate A2 with "In Progress". And if A1 was to equal 0% then A2 would be "Not Started".
my spreadsheet to return the word unit if cell a18=1 or the word units if its over 1 but i also want the cell to remain empty if there is nothing input into cell a18 is this possible
I have a table of data for items, and in one column I have links that go to webpages for those items. I need to pull the value from a particular cell and input that within a text link in another cell. For example:
A1 has the value "K111"
in D1 I need to have a link such as "<a href="http://link/K111>Click Me></a>"
You'll notice it's link with the K111 value input in it. I need to replace the K111 code that will put the value there. I know how to do this normally but not when it falls within other text. Is this possible?
I've written a spreadsheet and am wondering if there is a way to permit data entry in a cell, contingent upon another cell being populated.
In simple terms, you can't enter data in cell X, until cell "Y" has been populated with something.
Any way to trigger a macro in one cell whenever there's an input in another cell.
Attached is the example excel of what I want to achieve.
macro trigger.xlsx‎
Is it possible to input a cell address in a VBA macro by clicking in that cell?
View 9 Replies View RelatedI will try to be as clear and concise as possiable and adhear to the forum rules. I'm not a excel wizz, though I know the bascics and am willing to learn, I have a list in column A, in thise list there are repeated words eg the word sugar is repeated in A23, A45, A56 etc. In column B i have condition format so when i type a 'x' it turns the cell color from red to green.
What i am trying to do is if i enter the 'x' in column B in relation to the word - in this case sugar - it will automatically enter a x in all the other cells in B that has the word in there corresponding A column that matches the orginal 'x'. So for example if the word sugar is repeated in A23, A45 and A56 regaredless of where i enter the 'x' in the b column, weather its B23, B45 or B56 then cells i didnt manually enter the x will auto update in corresondance to the word...
what code can be used to be place in a Command Button on a worksheet that will use the value in a cell, change it to the directory where it have to be saved and save it to the value of another cell. Example:
On a worksheet called "Customer", at cel A1 will be the customer's name and at cell A2 will be the asset number. Now let's say a directory does not yet exist on the root for this customer, a new directory must be created in the root directory by using the name in A1, and the workbook must then be copied and saved under the value of A2.
Save As new woorkbook from Input Name
I have one line with input box
Macro to save as "xxx" Input box "___".xls
in the same folder as the original file?
xxx is defalut part of file name and input box for user to add criteria about file.xls
ie.. xxx_critera.xls
I've got a large file containing hundreds of rows of data. Groups of these rows have a header identifying the project they are relevant to (P1, P2, P3, etc.). I'd like to freeze column A & row 1 such that when a user enters "P3" (arbitrary project header) into cell A1, excel automatically scrolls to the cell in which "P3" is located. Ex: if the header "P3" is located in cell X99, when "P3" is entered into cell A1, I want excel to automatically scroll to X99 such that X99 is visible where B2 would be visible in a new document (one cell to right and one cell below A1).
View 3 Replies View RelatedI am looking for some macro code to create an Input box which will prompt the user to enter a specific date (not todays date so NOW function is not appropriate). This will in turn cause the file to be saved in a specific folder with the date becoming the name of the saved file.
I have a spreadsheet that requires an entry into an Input Box before the rest of the workbook is created. Users click on the button, an Input Box appears and they must enter data. Once the data is entered and they click OK the file is created and saved to their local drive with the name ".xls" and then the sheet closes.
What I want is to have the file that is created be named as whatever the user enters into the Input Box field.
I need to:Turn off "save" and "save as" command barsPrompt user for a unique filename Save file to a specific directory on the network common to all "p:dataprc"Requery user if filename exists and if they DON'T want to overwrite.Return to worksheet (there is only one) if the user cancels from the message box.Turn commandbars back on The macro runs from an on screen button
I get bug errors on NO or CANCEL when clicked in the message box. This is my current
Private Sub Workbook_Open()
Application.CommandBars("Worksheet Menu Bar").Controls("File").Controls("Save As...").Enabled = False
Application.CommandBars("Worksheet Menu Bar").Controls("File").Controls("Save").Enabled = False
End Sub
Sub SaveMe()
'
' Keyboard Shortcut: Ctrl+z
'
Dim BaseDir As String
Dim NewName As String
BaseDir = "p:dataprc" ...........
