I am looking to insert a row every time any cell in column A = R
This will happen around 50 times.
The inserted row will need to have an R in column A and the number 349273 in column B.
I am trying to insert a row every time a certain value appears in row.
Example attached.Example 1.xlsm
I need to copy the entire row that has the value 2 in column B and insert it in the line above (not fussy). It must be inserted and move all data in other rows accordingly.
HTML Code:
Sub DeleteEmptyColumns2()
Dim Cell As Range
For Each Cell In Range("4:4")
If Cell = "0" Then
Cell.EntireColumn.Delete
End If
Next Cell
End Sub
I am attempting to remove columns in my table of data, using the above code seems to remove some them but not all, is this the best way to loop through a range?
I have tried a range of "sumproduct" and "count if" and I am still not having any luck.
What I would like excel to do is to count what surgery/hospital (B)is referring for what product (F)
help.xlsx
My workbook stores data related to items that are all tracked by barcodes. Im using the following code (as part of a larger set of code) to copy data from rows 6 on in column D, E & G to K from one workbook to another. The data in F (Item Names) is found using a formula, by matching the barcode data in the corresponding G cell (on the same row) to another sheet (where the barcodes and Item names are stored). When the data has finished copying over and EnableEvents gets turned back on the F column mostly automatically fills itself in from the formula.
The issue I have however is in certain circumstances there are some items that either dont have a barcode, or the barcode is missing. In this case the user types "none" (not case sensitive), which opens a userform allowing the user to type in an Item name that gets entered into the F cell, overwriting the formula. I need to copy this data over separately to the new workbook. Im looking for code to find these records from row 6 on (either by searching for rows where G equals "none", or rows where F has no formula, and then copy the data in F over to the other workbook to the corresponding row number but offset by the number of records already present in the active workbook (currently being calculated by wbReturnDataLastRow).
[Code] .....
wb is the ActiveWorkbook that the data is being copied to
mybook is the workbook that the data is being copied from
I have a master data sheet with four columns, A, B, C and D
Column A has the primary data and B,C,D has dependent data values;
So when I insert a new cell in Column A with cells Shift Down, I want mandatorily new cells to be inserted in the same row in col B, C and D as well so that data integrity is maintained;
What I'd like to do is; If column C contains data then insert a blank column and shift column C to the right.
View 4 Replies View RelatedI am trying to count the distinct times a value shows up in a column, if another column has a 2 in it.
For example:
Columns
A, B
2,P25
2,P25
3,P5
3,P6
2,P5
The results shoud be: (2) Because I only want to count the P25 one time.
I'm using Excel 2010
how to count the unique occurrences in column A based on the value in column B. In the example below, I am trying to count the number of unique names in each state (Illinois=1, Colorado=2, New York=2). I would like the formula to count unique occurrences for the entire column A because I will be adding to the list.
..A.............B............C
John......Illinois
John.....Illinois
John.....Colorado
Alex.....Colorado
Alex.....New York
Steve...New York
Steve...New York
I am after a macro to insert a column lets say between column A and B. Once column inserted new column B should be filled by a text say "January" but it should be only filled upto the data of column A so if column A has data upto A600 then column B should be filled from B1 to B600.
I tried recording but it fills data upto B65000+.
I have two columns, Column A which is a list of numbers and Column B which is a list of different sports. What i want is a formula that adds all the values in column A where the adjacent cell in column B equals a given sport (i will use Golf in this example).
View 2 Replies View RelatedI want to create a macro which inserts a new colum after the last colum with data.
View 3 Replies View RelatedThis is an extract from my workbook.
11661681192203
I need a formula in column d that will return all the missing values between for example b1 and c2 and b21 and c21. The catch is that the numbers in column b and c can be anywhere but row b will always have the starting number and next to that cell the ending number in column d.
a further condition is that it must only calculate the missing number if the value in column a=1. if it is blank than nothing must be calculated.
I've seen a few examples of macros to delete the row if the first letter is something, but not if the first 2 is equal to something.
I'm looking to go thru every row that contains data and look in Column B to see if it starts with P4 or P5. If that's true, then delete the entire row.
i have numbers in column A1:A556, i want to insert a row below every column that has a number so that they can have double spacing.
View 1 Replies View RelatedI need to match data in cell A to cell B and then if they equal I need to copy the adjacent cell C to cell X . How do I set up a macro to do this automatically? I have over 5000 cells to compare and match up.. I have Office 2003.
View 7 Replies View RelatedI would like to know how to use a VBA code to insert today's date into a specific cell (B9) when any cell in column B (B2:B8) has changed.
View 3 Replies View Relatedformula that would count the instances in Column C, where Column A contains "LH" or "RH" as part of the word, and column B equals "Either".
View 5 Replies View RelatedA colleague recorded this macro to insert a row into a column of data which a graph is plotted from to automatically update the graph each time more data is added. I can't figure out how to simplify the VBA and stop it adding a row on row 57 rather than the bottom of the graph.
Code:
Sub Button1_Click()
'
' Button1_Click Macro
'
'
Rows("56:56").Select
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Range("B57:F57").Select
[Code] ........
I am making a deposit sheet schedule, which has 10-15 batches of deposits that are entered one after the other, vertically. Each deposit entry can be allocated to many different expense accounts, so a deposit will be 500 with 400 to rent, 50 utitilies, etc. So I need multiple summation rows
So, I want to add a sum row beneath each set of deposits.
My problem is that each deposit is a different amount of rows long.
I was thinking of doing something like this:
'totalRow() is each row where the summation formulas will go totalRow(0) is not an actual sum row, but tells me where the first row of data lies.
For Each cell In Range("H" & (totalRow(x - 1) + 1) & "", "J" & (totalRow(x - 1) + 1) & ":N" & (totalRow(x - 1) + 1) & "", "P" & (totalRow(x - 1) + 1) & ":AB" & (totalRow(x - 1) + 1) & "")
cell.Formula = "=sum(Range(""A"" & (totalRow(x - 1) + 1) & "":A"" & (totalRow(x) - 1)"
Next
I don't know how to reference the ranges I want to sum, because I don't know how to increment the reference to the column (i.e. changing A to B to F to G, etc.) with the Range().Formula construct.
I was thinking of using R1C1 somehow but I'm not as familiar and I don't think you can use r1c1 & Range() at the same time.
I have a sheet where there is a column showing all the totals of previous entries, however a couple of the cells shouldn't total but just show the last entry.
The cell is for an ongoing count of year to date applications received.
Can anyone tell me a formula that would look for the last data entered in a row and return that value
I have a dataset that i want to update, to do this I want to insert 8 rows after each row that has a value in Column C 2000. The set has 600,000 rows, comparing countries (cty, cty2) from 1980-2000. I want to make room for information up till 2008. I see lots of codes for doing this but I will also need help with actually inserting into my spread sheet.
View 3 Replies View RelatedI'd like to find out the formula where numerical valued between 1-2000 equals True and numerical under 0 equals False. Examples are in the attachment.
View 3 Replies View RelatedI am trying to insert three columns within a large amount of data. I am using Excel 2003 edition. The three columns need to measure max, min, and standard deviation of month long ranges and the data goes all the way back to 1993.
Currently, I have a column that has the correct ranges but finds the average for each month
(=AVERAGE($H7214:$H7243))...
And many more ranges as it dates back all the way to '93. Is there a possible way to insert these three columns with their respective commands (=MAX... =MIN... etc.) while keeping all the ranges from the AVERAGE column.
In effect, I am looking to solely switch the begining of the column command
(=AVERAGE($H7214:$H7243)) to (=MIN($H7214:$H7243) etc...
While keeping all of the specified ranges from the AVERAGE column.
Im using this to loop through ID's for my code.
Sub Test2()
' Select cell A2, *first line of data*.
Range("A2").Select
' Set Do loop to stop when an empty cell is reached.
Do Until IsEmpty(ActiveCell)
' Insert your code here.
' Step down 1 row from present location.
ActiveCell.Offset(1, 0).Select
Loop
End Sub
How can I set a cell value = to what cell I the loop is currently on?
I have a formula =IF(D87=0,"",E87(D87-E87)/ABS(E87)) that returns a blank if D87 is Zero. if D87 and/or E87 is also Zero how would the formula look?
View 2 Replies View RelatedI have sheets that return their name with the following formula:
=MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,256)
All good, but on my summary sheet (that is summarising the data in each sheet) I want a cell to return me the name that each sheet is called, but simply saying ='SheetName'!B1 is not working
So how to I get the cell on my summary page to return me the text of the cell that is using the above formula.
I have created a file in which other users use on a daily basis to input their time in and time out hours per activity. There are 16 rows allowing them to input up to 16 activities completed in a day. More often than not they do not use all 16 rows. My issue is that these users are very computer illiterate and will often delete the zero that is in their time in or time out hours on unused rows. This results in their total time displaying "####" I have explained to each of them multiple times to input a zero and their problems will be corrected, but they can't seem to grasp that concept.
How to allow the users to input their times, but if they hit delete on a cell and the cell is blank for it to automatically populate the cell with a zero no matter what the user does. I have all other cells with formulas on the sheet locked, but if I lock these cells then they can't input their times.
I have a round formula,
=round(D65-E65,4)
The issue with this formula is if D65 is 0...then the result is a negative number. Just for clarity,
D65=0, E65=10%.....
So I end up with -10%. I can't have a negative number so I'm looking if the result is negative then the cell just equals 0. Is this possible with an IF formula?
I am familiar with the macro DeleteRowOnCell, but I want to delete rows when a cell in a selected column has a formulae which is returning empty text. I tried the macro DeleteRowsFastest without success.
View 2 Replies View Related