I require spreadsheet to insert row based on the Value in Column (C). If The value in column C is < 15 then insert Blank Row below the line.
find attached the speardsheet.
i.e. 01.00am has been booked for 14plt which is LESS than 15 therefore i require excel to insert row so i can book addtional delivery during that hour.
TIME
DELIVERY COMPANY
PLTS
REF
[Code]...
I have some code that changes the colour of a cell based on the value of that cell, not sure how useful this is as I could just simply use conditional formatting.
I have a pivot table that is constantly changing values, the column is a result of a number of days...not really relevant.... however If the cell contains a value of greater then 7 I want to insert a .JPG of a lil stop sign, if less then 7 then a little green go sign will be insertedThis is what I have so far..just changes cell color.
Sub DoOnSelection()
Dim oCell As Range
For Each oCell In Selection
If oCell.Value > 7 Then
oCell.Interior.ColorIndex = 3
End If
Next
End Sub
I'm working on a large table which has one unique product number followed the number of rows that I want to add below it (for other variants of the same product number).
The Data looks like this:
Column B Column C
12543 2
13456 2
19543 1
I want it to look like this:
Column A Column B
12543
12543
12543
13456
13456
13456
19543
19543
I have lists of numbers in column A. Based on the number in the cell, I would like to insert RO_ or RP_ before the number. I currently have two buttons for this, one named RO and the other RP and have simply recorded a macro of what I wish to do. However, instead of inserting RO_ or RP_ before the number the macro replaces the hole lot with "RP_10" or "RO_10" as this was the cell i recorded the macro on. How do I make it so it just inserts the Prefix rather than replace the contents of the cell.
Currently my code for one of the buttons is as follows;
[Code] .....
Want to run a script to add rows beneath each row based on the value in one of the cells in that row and then move to the next row of data and do the same.
For example:
Cell E5 = 7, I want to Insert 7 rows beneath row 5, then move to the next row and insert the number of cells equal to the value in column E of that row.
I need to create a macro that will insert exact number of rows based on the value in certain cell. e.g. value in cell F2 of sheet1 is 3...so I need to insert 3 rows down from cell F9 in sheet2 copying data in cells D9 and E9 to inserted Cells / rows.
View 4 Replies View RelatedI have data validation and conditional formatting set for my sheets. However, I cannot figure out something.
I want a "comment" box (just as if I would click on "add comment") to pop up automatically if the user enters a certain value in a cell.
For example, if cell C4="1" then no further action is required. If cell C4=anything other than "1", then the user would be required to enter a comment. I would also like the comment to autopopulate with the users login id.
I will attach the book I am working on for reference, but I do not have any code written for this as I could not figure out where to start.
vba to copy and insert row based on cell value
I have a spreadsheet with serveral thousand lines. I need to add row(s) and fill-in values based on a value in anothe cell; for example,
Based on the value in Column A, a row(s) needs to be added below the row and a count (value) to B needs to be inserted into the cell in Column B. This step needs to be repeated for all rows to the end of the sheet.
I would want to copy and insert the entire row.
LABELAB110
2
1
My current code works, but there's got to be a shorter version to insert rows based on a cell value. Currently my code works on a series of If statements. If the value in the current cell is "2" then goto the next row and insert one line. If the value is "3" then go to the next row, insert, next row insert etc. I'm currently written up to a value of 10, but the coding is getting longer and longer. Anybody got a shorter loop that I could use.
I need to insert a row based the value of in column L. For example, beginning at L10 and down, are values. These are subtotals that are dynamic (as in they move based on how much data is inputted to the worksheet monthly.) I need to insert a row above the value. So if L22 has (2,961.25) in it, I would like to it down and insert a blank row. So on down the sheet.
View 2 Replies View RelatedThere's got to be a way to do this (mail merge style perhaps...) I would like to insert the entry/ies under a heading in a table in one worksheet whenever that heading matches the data entered in a separate worksheet.
Presently I can find no way to do this in Excel.
Can I have a picture appear next to what is typed in the cell next to it. I have a drop down list of the different pictures I have, I want to select, for example, "star" from the drop down list, can I have a picture of the star appear in cell next to it? I have all the pictures of the words in my drop down list.
View 1 Replies View RelatedI'm trying to create a macro that takes data from one row and inserts it into a new row. Attached is a workbook with a before and after example of what I'm trying to do.
Each row has a security transaction that includes principal cash and interest. The data needs to be formatted so that each transaction has one row for principal and one row for interest.
Principal is identified by the tran code PAYDOWN in column C. Interest is identified by the tran code INT. However, the raw data generated includes both interest and principal under the tran code PAYDOWN.
There could be 100 or 1000 transactions generated based on the day.
I am trying to write a macro which will insert a blank row at the end of each year(A column) (Last cell i.e Dec 95 and so on).
I have attached the file for the same ....
i'm sure this can be done but i cant get an angle on the method. i want to use VBA to put a formula into cell G3 based on the users entry in cell D3 so, for example the user enters M in cell D3 and the VBA code puts the formula "if D3="M",A3,0"into cell G3
i know i could use a formula in the cell but i want it to work with multiple entries so i figure VBA is the way to go.
The first three columns of a spread sheet we use if function to insert values to these cells based on the next three column values. We have already done it using IF function. However, the same function should happen through macro by referring to the column headers.
Example 1:
If in column E header (E1) ‘Contract_Status’ and E2 cell value is ‘FAIL TO PAY’ then A2 value should be ‘No Owner’, B2 value should be ‘Terminated’ and C2 value should be ‘FTP’
Example 2:
If in column E header (E1) ‘Contract_Status’ and E3 cell value is ‘TERMINATED’ then A3 value should be ‘No Owner’, B3 value should be ‘Terminated’ and C3 value should be ‘TERMINATED’
Example 3:
If in column E header (E1) ‘Contract_Status’ and E4 cell value is ‘EXPIRED’ AND column F header (F1) ‘Contract_Renewal_Status’ and F4 cell value is ‘Cancelled by Customer’ then A4 value should be ‘No Owner’, B4 value should be ‘Renewal Cancellation’ and C4 value should be ‘cancelled’
Inserting Rows and Headings. Is it possible to automatically insert Rows and Headings based on the Cell value of a particular column ? For example column B consists of a field called, 'Assigned Group'. Column A consists of a field called, 'Fault description'. Column A needs to have a heading depending on the value of Column B. One row also needs to be inserted above the heading.
View 6 Replies View RelatedI have three columns - "Start Time", "End Time", and "Elapsed Time". Elapsed time is just end time - start time. What I would like to do is insert rows based on elapsed time.
For instance if start time is 6:00 and end time is 6:10, then elapsed time is 0:10. In this case I would like to insert 10 rows below. Basically I want to insert 1 line per minute (based on elapsed time).
I need a macro that will do the following scenarios.
1. I have two workbooks.
a. The first contains a sheet with " Names" listed in column A.
b. The 2nd contains a sheet with "Names" listed similar to first workbook. The only difference is that the 2nd workbook contains 2 other columns, "Age" in B and "Address" in C.
2. Only the 1st workbook is opened.
3. When I click a name in the 1st workbook, it will look for a match with that of the 2nd workbook.
a. If there's a match, it will copy the corresponding "Age" and "Address" and display them as comment to that name in the 1st workbook.
b. Else, it will display a comment that no record was found.
I will have a list of unique values. For each unique value, there is an indicator that tells me how many lines of information I need. Based on that criteria, I need a macro to insert that many rows and populate it with text. This will ultimately become a look up table that I will just use index/match function to populate.
I've attached a sample sheet. I'm not sure if I need a macro to insert rows or a macro to paste a copied range. Or maybe I need a mixture of both with a formula to calculate the number of cells I need?
Column B contains geographical Areas. Column C contains a list of business departments.
North Env
North Env
North Ops
North Sales
North Sales
North Sales
South Env
South Maint
South Ops
South Sales
South Sales
South Sales
Etc.
The values and number of these departments will vary. I want to insert lines to sum the totals at the bottom of each geographic area based on the number of different departments. So, for this example, for the North three lines would be inserted. For the South, 4 lines would be inserted.
when a cell in column "K" is clicked, an input box gives the user the choice of entering a number between 1 and 12. That value then inserts row(s) based on input value ..
View 6 Replies View RelatedI am having a product style code in Column A2:A301 from 1 to 300, and I want get picture in next cell ie column B2:B301 based on cell value A2 from a selected folder. Below mention is the snapshot for the same. I am having a product style code in Column A2:A301 from 1 to 300, and I want get picture in next cell ie column B2:B301 based on cell value A2 from a selected folder.
A B
Style_code Picture
1
2
3
4
a macro/code to accomplish the following:
I would like to insert a row if:
Difference in values in Column B are more than 2 .... OR ...Difference in values in Column C are more than 2
Specimen
Value 1
Value 2
[Code]....
In the above table, rows would be inserted after specimen A, B, D, and E.
I have a list of 130 names in column A. I have a number value between 0-10 in column B (next to the name). I need to insert the number of rows defined by the value in column B, below each row that I already have (if the value is 0, then the row needs to be deleted). The inserted rows have to be filled with the name value from the row above.
For example - before macro:
Joe Bloggs 2
Adam Wilson 10
Peter Andrews 0
Claire Burrows 6
After macro:
Joe Bloggs
Joe Bloggs
Adam Wilson
Adam Wilson
Adam Wilson
Adam Wilson....................................
I have a spreadsheet with four columns of text.
In column A, i have multiple levels followed by a letter (i.e. Level 1A, Level 1B etc).
In column B, i have some other details and then so on and so forth.
In column C/E/G lets say, i want to copy the information from column A to show only items that appear as "Level 1" (not "Level 1A", i only want it to check for things without the letter at the end). Then the same in column E but with "Level 2" and so on and so forth.
Column A...Column B-Column C...Column D--Column E...Column F--Column G...Column H
Level 1A....Metals----Level 1A....Metals ---Level 2A....Integral---Level 3A....Television
Level 1B....Energy----Level 1B....Energy--- Level 2B....Flowers---Level 3B....Kitchen
Level 1C....Synergy---Level 1C...Synergy--Level 2C....Full
Level 2A....Integral---Level 1D....Orders
Level 2B....Flowers
Level 1D....Orders
Level 3A....Television
Level 3B....Kitchen
Level 2C....Full
I also have data in Column B that is to do with column A (i.e "Level 1A" - "Metals") and so on with the following columns. I want the items that are in column B to also move over to column D when the things from Column A move to Column C, so at the end it will appear as below so it appears as above.
where i have a products list and respective pictures in a folder. What is should do is to get the relevant pictures appear on the screen when i select the relevant name.
View 1 Replies View RelatedI need to create extra rows of duplicate data. The number of duplicate rows depends on the number of semi-colons in the 15th column (column O).
Sheet 1 is the original working file. Sheet 2 is the result of how the executed macro for the first 2 lines of data. The first line in sheet 1 has 7 semi-colons, so there should be 7 rows of duplicate data created in sheet 2. The second line in sheet 1 has 6 semi-colons, so 6 duplicate lines, etc.
I have a sheet that contains the following columns:
Invoice, Document #, Date, PO #, Part #, Part Description, Quantity, Net Amount
Based on the quantity in the row I need to copy the row, and insert it n-1 times. So if the quantity is 5, I need to copy and insert the data below the original row 4 times for a total of 5 rows of data.
I plan on firing the macro with a button as the data will change month to month.
Using Windows 7 and Excel 2010
I have 2 workbooks open, one called "Temp" and the other called "CRM 2"
My active workbook is "Temp". I am trying to insert a value into the active cell in this workbook, based upon the value of a checkbox in the other spreadsheet. Here's my
If Windows("CRM 2.xls").SelectedSheets.CheckBox6.Value = True Then Selection.Value = "By Phone"
I've tried variations on this such as:
If Windows("CRM 2.xls").ActiveSheet.CheckBox6.Value = True Then Selection.Value = "By Phone"