I want to link cells B1 thru B16 to Cells F1 thru F16 receptively.
However, at times I need B1 thru B16 to show other columns 1 thru 16.
I would like to type in the column designation in A1, ie. F,G,H,I.....and have the values of those columns shown in B1 thru B16.
I've created a bar chart that I want to add some text boxes to. I want the text boxes to read what is in Cell A1 for example as the information in that cell will change over time.
How do I create a link between the information displayed in the text box and what's in Cell A1?
i need a macro which puts the formulas into the cells as per attached.
the number of rows between the "beam" can be variable
the number next to the beam will be variable.
the number of "beam" rows is vaiable
my thoughts where to do a find"beam" and refernce the cells address the create formulas off those points but dont have the skill to code this
beam macro.xlsx
I have 5 columns set up: A,B,C,D,E
D is the sum of A and B
E is the sum of A,B,and C
As I add in a new column to the right of C (call it C2), I need D (which has shifted over one) to sum A,B, and C.
I also need E (which has also shifted over one) to sum A,B,C, and C2.
Essentially I need a function in a cell that will be able to reference two cells to the left even as more cells are added.
The first three columns of a spread sheet we use if function to insert values to these cells based on the next three column values. We have already done it using IF function. However, the same function should happen through macro by referring to the column headers.
Example 1:
If in column E header (E1) ‘Contract_Status’ and E2 cell value is ‘FAIL TO PAY’ then A2 value should be ‘No Owner’, B2 value should be ‘Terminated’ and C2 value should be ‘FTP’
Example 2:
If in column E header (E1) ‘Contract_Status’ and E3 cell value is ‘TERMINATED’ then A3 value should be ‘No Owner’, B3 value should be ‘Terminated’ and C3 value should be ‘TERMINATED’
Example 3:
If in column E header (E1) ‘Contract_Status’ and E4 cell value is ‘EXPIRED’ AND column F header (F1) ‘Contract_Renewal_Status’ and F4 cell value is ‘Cancelled by Customer’ then A4 value should be ‘No Owner’, B4 value should be ‘Renewal Cancellation’ and C4 value should be ‘cancelled’
Can anyone help? I need to achieve the following involving the insertion of rows from a specified value reference within the worksheet to which the rows are being added.
The original data would look like:
ABCDEFG1PeterABC, DEF, GHI32DavidABC, DEF23SamABC, DEF, GHI, JKL44TomABC, DEF25
The number of rows to be inserted under each entry is listed in column "C" (which is a count of the separate entries in column "B".
The output data following the application of the "solution" would need to look as follows:
ABCDE1PeterABC, DEF, GHI3ABC2DEF3GHI4DavidABC, DEF2ABC5DEF6SamABC, DEF, GHI, JKL4ABC7DEF8GHI9JKL10TomABC, DEF2ABC11DEF
Where the specified number of rows have been inserted underneath the original entry and the separate values in column "B" have been listed in consequtive cells, relating to their original entry in column "D".
Can anyone suggest code to achieve this outcome?
I have referenced data in two colums on a sheet A and B. Column A contains the latest data, each month i insert new column (moving column A to column B). However all of my references continue to follow the original data (eg will change from column A to column B). this happens despite using Absolute references. (=$A$1). Is there a way to lock these cell references to only ever display column A etc?
View 2 Replies View RelatedI want to insert a cell reference into the code below to replace the hard coded "100500" so the value in cell A1 replaces the criteria below. Is this possible ?
Rows("3:3").Select
Selection.AutoFilter
ActiveSheet.Range("$A$3:$B$17").AutoFilter Field:=2, Criteria1:="100500"
Range("A3").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
Range("A22").Select
ActiveSheet.Paste
I need to open a customer-submitted workbook which has a list of items in column B, marked by an 'X' in column A on selected rows. Each customer's list is tailored to them with, say, 25 rows each.
I have a master list with identical formatting but which has the data from ALL lists combined.
I want to insert an 'X' in column A of my master workbook for any matching items for which there is an 'X' in column A of the customer's workbook.
I could do this with a formula in column A of my master list, but each customer's workbook has a unique filename and I don't know how to make the formula use a changing lookup array, so I figured this is something that I have to accomplish with VBA.
A 'Days Attended' cell (N8) and a 'Days Absent' cell (O8). N8 needs to count the number of "Present" values there are on another worksheet. The other worksheet has dates across the top and names down the side.
When i use
=COUNTIF("Attendance!C9:Z9", "Present"),
and the next date comes along the formula changes to
=COUNTIF("Attendance!D9:AA9", "Present")
ie. the reference moves a column across - the new date's absent or present is not counted. Using =COUNTIF(INDIRECT("Attendance!C9:Z9"), "Present"). is no good because when i add a new name i need the row reference to move down as a row is inserted. ie. both person's formulas count the same row. So, my question: I need the columns to stay the same - C:Z (leyway for future dates) and the rows to change as i insert or delete people from the system.
I have a question and wanted to know if it was possibe and if so how. I wanted to link cells from one workbook to another (Which I know how to do) the problem im having is the linking works but why doesnt the cell color chang like it is in the workbook im linking from? Example: If A1 has text (Me) with the cell being green then the linked workbook would only have the text (Me) and not the green cell.
View 4 Replies View RelatedI have values on master sheet and want to link those values to source documents in the same workbook. But the values on master sheets are made up of more than one value on another sheet.
For example on master sheet I have $137,000 that is made up of values in P7 + Q7 + P57 + Q57 on source sheet. If user wants to see where this number is coming from; the user will click the number to go to source document.
On a single valve I linked to the source sheet to a single cell. One thing I was thinking, using conditional format, so if one of the cells is selected in source document the other cells that combine the total of the master sheet cells should be highlighted, just my 2 cents.
I have one cell with $20,000 hard coded (cell A1). In another cell I want the cell to say "20,000 Capital Raise" (cell B1). And i want B1 to link to A1 so that if i change the number in A1 it will also change in B1.
Here's what i have in B1 so far: ="$"&J6&" Capital Raise"
This produces "$20000 Capital Raise" in cell B1.
So the only thing i'm trying to figure out is how to get the comma in the $20,000 so it will read "$20,000" instead of "$20000".
I have lets say 12 months of data. I have formulas that reference the latest 6 months. When I insert a new column to input a new month, how can I make the formulas include the new months without manually updating them.
EXAMPLE:
12 months of data exist in cells B3:M3 going from B3(oldest) to M3(newest). Formulas reference latest 6 months of data in cells H3:M3. When a new month hits, I insert a column after column M.I would like the formulas to now reference cells I3:N3 which is now the newest 6 months.
I have a workbook that uses the values that a user had entered into 3 cells to calculate multiple other charts/diagrams on multiple sheets within the workbook. Each sheet would show what the user had entered in the 3 cells to allow them to see what is being used to calculate each table. Is it possible to link these cells so that the user can change the 3 values without having to go back to where he originally entered the 3 values?
For example, a user has entered in 3 values in Sheet 1. A formula in Sheet 2 displays what is entered by the user and uses these calls in Sheet 2 for calculations. When the user wants to change the three values, he would have to navigate to Sheet 1 and enter in the new values to have the workbook recalculate all the tables. Is there a way to link the three cells from Sheet 1 and Sheet 2 so when the user is on Sheet 2, he has the opportunity to change the values on the current Sheet without having to navigate to Sheet 1 to do so?
i want to match a cell data with a range of cells and if matches return the cell reference in another cell
View 3 Replies View RelatedI am currently creating a formula/function to insert a value in once cell into many cells using excel 2003 , for example: cell A1 has a value 100 000 000, and the value is going to be inserted, into B1,C1,D1,E1,F1,G1,H1,I1,J1.Each cell will only have one digit only so B1 will have 1, C1 will have 0, D1 will have 0 and for the rest of the cell will have the same thing instead of whole value.I tried this thing with the MID function and it works as long as the source value cell is 9 digits(filling the cell from the B1toJ1), it became my concern when I changed those value less then 9 digits,say 8 or 5 digits where the cell will receive the value are B1 to F1 if 5 digits or B1 to I1 if 8 digits, the rest of the cells are blank.
Are there any possibilities, solutions if the inserted value can be started from C1 to J1 for 8 digits or F1 to J1 for 5 digits etc (less than 9 digits) instead of B1 to I1 (8 digits) or B1 to F1 for 5 digits?
Cell C3 has "Joe"
Cell X44 is a VLOOKUP that retrieves "Joe"
Let's say Joe goes on vacation. The workbook user goes in and puts a blue fill in C3. Cell X44 would also need to change automatically.
What's needed to make this happen?
Have a formula
=INDIRECT("[LincolnRollingYearRecords2012"&$I$1&".csv]LincolnRollingYearRecords201220!A29")
that when I copy and paste down the page, the last field "A29" does not update to the next cell .... ie "A30" etc
How to make this update as I copy and paste down the page.
I need to make sure that splited cells do not replace content of other cells. For example, if A1 has "SDR232, SDR634", this code will split them and put A1 to be "SDR232" and A2 to be "SDR634". BUT what it does is that it actually replaces whatever I have in A2. Is ther anyway to avoid replacing the content of A2?
Sub tst()
Dim X As Variant
X = Split(Range("A1").Value, ",")
Range("A1").Resize(UBound(X) - LBound(X) + 1).Value = Application.Transpose(X)
End Sub
I need to put an extra "spacer" cell in each row that contains either 8 or 9 blank spacer cells in columns A through H or A through I, respectively, so that everything in those rows shifts to the right by one column. The problem is that all the other rows don't need any extra spacer cells. There is no pattern to the rows that need the extra spacer cell (such as every 5th row, or something).
View 3 Replies View RelatedI have a loop that executes roughly 7.7 million times when my VBA program runs. Neednless to say it take a long time to run - usually a couple days.
The inner-most loop contains a line of code from way back in my early vba programming days when I knew even less than the small amount I know about programming now (and if you can follow that sentence you might be able to understand some of the spaghetti code I write :-) ).
for k = 1 to n
if Worksheets("Personell").Range("D" & Trim(Str(k))) > dtCompleted then ...
Would it be faster to use this syntax (which I just found out about):
if Worksheets("Personell").Cells(k,4) > dtCompleted then ...
It would cut out 2 functions calls, trim() and str(), so it would be faster, right?
I am almost embarassed to post the Range("D" & Trim(Str(k)) line of code because it looks so convoluted now, but that's how I learned to program, just fumbling through until it ran...
So in short, I just wanted to confirm that the cells() syntax run faster before I spend an hour editing and tested.
I want to apply conditional formatting to a range, but only to the number of rows in the sheet (to avoid formatting blank rows). I am not sure how to insert the row count into the range select.
NumRows = Application.WorksheetFunction.CountA(Range("A1:A65536")) gives me the number of rows, but how do I get that into
Range("A5:F18").Select
18 being the number I want to substitute the row count for.
I'm wondering if there is a way of linking to cells by looking up part of the link in another cell. E.g.In Sheet1, cell A1, i have some data that I want link to from Sheet2. Normally I'd do that by using "=Sheet1!A1" in the cell in Sheet2.
But I'd like to lookup the "A1" part of the link from two different cells in Sheet 2. Something like: =Sheet1!(Text from B1 in Sheet2 AND Text from A2 in Sheet2)
or: =Sheet1!(Sheet2!B1&Sheet2!A2). So that if Sheet2!B1 would contain an "A", and Sheet2!A2 would contain a "1" the resulting link would be the correct "=Sheet1!A1"
I want to find the cells 30 past the reference cell and the corresponding value:
i.e. =Sheet1!D312 to =Sheet1!D342 (=Sheet1!D(312+30))
or
=Sheet1!D312 to =Sheet1!E312
is there a way to automate this without having to manually edit each formula?
I will have a list of unique values. For each unique value, there is an indicator that tells me how many lines of information I need. Based on that criteria, I need a macro to insert that many rows and populate it with text. This will ultimately become a look up table that I will just use index/match function to populate.
I've attached a sample sheet. I'm not sure if I need a macro to insert rows or a macro to paste a copied range. Or maybe I need a mixture of both with a formula to calculate the number of cells I need?
I'm preparing an accounting model for my office use. How to solve the copying of formula to all other cells.
The detail is here:
Sheet 1:
1) I've entered a number 1000 in L2
Sheet 2:
1) I've entered a values in columns D,E,F,G
2) Calculations :
at G2 : the formula is =D2*Sheet1!L2
The problem is when I Copy the formula in G2 through G3, G4, G5........... it changes to =D3*Sheet1!L3, =D4*ValidData!L4, =D5*ValidData!L5 and so on... but it should be =D3*Sheet1!L2, =D4*ValidData!L2, =D5*ValidData!L2, so that the L2 value shall be constant for calculations in all cells.
I am trying to find a way to automatically highlight all the cells specified by the cell references in a column on another worksheet (which will constantly have new values added).
On the attached sample, the 'Data Before' tab shows the base data before any highlighting. As cell references are added to the 'References' tab in 'column A' I want the respective cell to be highlighted on the 'Data Before' tab resulting in the 'Data After' tab and each time a new cell reference is added to the 'References' tab, the respective cell is then highlighted on the 'Data Before' tab.
I would like to have control over the highlight colour so that a different highlight colour can be specified for each date change, i.e. all cell references that are shown on the same date are the same colour but where the date changes a different highlight colour can be specified.
Highlight by Cell Reference.xlsx
Any other way of subtotaling data. I am an inventory analyst and do monthly/quarterly totals and averages of inventory used, and need a quick way to fill the blank cells with the part # that is below them, as shown below. I need the part #'s so I can then use CONCATENATE() and pull data from multiple time periods so the part #/year will match up down the page.
FILL P100012008360 FILL P100012009286 FILL P10001201072P10001718 FILL P1000220089,075
FILL P1000220091,124 FILL P1000220103,225 FILL P1000220116,375P1000219,799
FILL P10002PL20089,234 FILL P10002PL200912,150P10002PL21,384
how do I go about linking cells?
Example:
Lets say I have a workbook with 6 sheets on it and the sheets names are:
Sheet1
Sheet2
Sheet3
Sheet4
Sheet5
Status
And we will just use cell A1 through sheet1 to sheet5 and the status sheet to grab the numbers from sheet 1 through sheet5
Sheet1 through sheet5 will have numbers in cells A1
Sheet1 : 586
Sheet2 : 436
Sheet3 : 621
Sheet4 : 610
Sheet5: 561
And in the status sheet I would like to find the highest number from these 5 sheets and put it in cell A1 status sheet and have it linkable like when it finds the highest number it will put it in cell A1 on the status sheet and when I click on the A1 cell in the status sheet I would like it to goto that sheet that has the highest number it found and maybe highlight it or something.