Split Cell And Insert (not Replace) The New Cells
Mar 4, 2009
I need to make sure that splited cells do not replace content of other cells. For example, if A1 has "SDR232, SDR634", this code will split them and put A1 to be "SDR232" and A2 to be "SDR634". BUT what it does is that it actually replaces whatever I have in A2. Is ther anyway to avoid replacing the content of A2?
Sub tst()
Dim X As Variant
X = Split(Range("A1").Value, ",")
Range("A1").Resize(UBound(X) - LBound(X) + 1).Value = Application.Transpose(X)
End Sub
View 9 Replies
ADVERTISEMENT
Jun 17, 2009
I have a list of first names and surnames, the first name and surname are in one cell together but seperated by a commer.
For example in A1 would be Steve, Jones
What I want to do is have this split into two new cells. So in A2 I would have his first name and in A3 his surname. Formula to do this is what I cant get to work.
View 2 Replies
View Related
Apr 24, 2012
I would like to know if you can split 1 single cell into multiple cells in 1 column?
View 11 Replies
View Related
Jul 10, 2009
macro of the attached sheet.
Actaully i want a macro which are splits one cell data into deiffernt cells or rows.
View 9 Replies
View Related
Mar 23, 2013
the question: i'd like to split a large cell in to smaller, fixed-size cells (columns) by a standard formula.
example: consider cell A1 = 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' i'd like a formula that created B1 = 'ABCDE' C1 = 'FGHIJ' D1 = 'KLMNO', etc
I used =Left (A1, 5) and got A1 = 'ABCDE' easily enough. I'm stumped at coming up with a formula that provides the next 5, and the next 5, etc.
the setup: if you want to know why i really need to solve the question i'm asking rather than using the split cell function:
i have a large set of data from a vendor. ideally, this worksheet will be used for other vendors that submit data similarly.
the script i'm writing takes a specific format--which i can't logically hold the vendors to. so, my specific formatting is on one sheet, referencing the data from each vendor on another sheet.
there is one field of data from vendors that is large ( >4000 characters, typically). however, this field makes my SQL server puke. i need to break this field down in to chunks of 1000 characters, and then re-concatenate after it leaves SQL to its final destination.
because i want to use some script automation to reuse this project, i'm reluctant to just use the split cell function to break up the data. rather i'd like to use whatever data is provided, and referentially split it up in my pre-formatted data.
View 2 Replies
View Related
May 6, 2013
Other than using text to column feature, how to split values in a cell to multiple cells. For example; in cell A1 I have something like this:
text1
text2
text3
text4
There is no comma or seperation. What i want to do is:
B1: text1
C1: text2
D1: text3
E1: test4
View 2 Replies
View Related
Aug 11, 2013
Ihave data in column "B" like bellow & i want split that one cell data to different cells base on space. i mean after each space data should add to next cell ( from column "C" data can split). (formula or macro)
41981 (C-2313) TEX-120 3000 M - Poly Poly Core - Silver Falcon
41981 (C-2313) TEX-60 3000 M - Poly Poly Core - Silver Falcon
42684 (C-3899) TEX-120 3000 M - Poly Poly Core - Silver Falcon
View 1 Replies
View Related
Nov 8, 2013
I have many columns in my current spreadsheet but I have two columns that I want to split in to two project names.
Currently I have one column with: Project A/Project B And the second column with the total cost of Project A AND Project B combined
The thing is that I can easily just create a new line but that would mean all the data in the other Cells remain the same and the only two that will be different are the above two columns. I will be maintaining alot of rows so I was hoping I do not have to create two rows for every new item then to merge both rows in reach column every time I have to put in a new Item.
I am hoping to have for example the below
Name Comments Project Cost
-------------------------------------------------
Item 1 This item relates Project A $150
to upgrade of Project B $120
SAS system
----------------------------------------------------
Currently I have it as
Name Comments Project Cost
-------------------------------------------------
Item 1 This item relates Project A/B $270
to upgrade of
SAS system
---------------------------------------------------
View 2 Replies
View Related
Jan 20, 2007
Is there a way to split a single cell in to two cells?
View 9 Replies
View Related
Feb 6, 2007
I have some data that is imported, it's about 25,000-30,000 characters and 2,300- 3,500 words, it all comes in as one cell, A1, if I do a text to column on it I will loose everything past column IV. Is there anyway a macro can take the data and put each word in a cell by its self starting in A2? The words a have a space between them.
View 9 Replies
View Related
Jan 13, 2014
I am receiving a new report from an external system. Unfortunate the system delivers many information within one cell, and it is not possible to reconfigure. These information are separate by a semi-colon or a semi-colon + space. separate the information in separate cells?
View 1 Replies
View Related
Sep 19, 2009
I have a spreadsheet that I have to extract from a web based report at work. The problem is that the column that contains the department name also contains the department code in brackets. For example cell A2 will have: (DE) Department A and cell A3 may be (DEPT) Department B.
Now as seen in the example above a code can range from 2 to 4 letters. I wondered if there was a way in code that would search for the ')' character and copy that to the M column and then copy the department name into the N column. So M2 would have 'DE' and column N2 will have 'Department A'.
Also in column G contains the grade name and grade point which are separated by a '/' I would like this to be copied to 2 separate cells say O2 and P2 and so on.
I know this can be done by a formula but I have to do this every month and it would be nice to just click a button to run a macro in my personal.xls file.
The row number various and are usually several thousand. I have attached a sample spreadsheet that only contains 4 rows of data.
View 7 Replies
View Related
Jun 3, 2008
How do I split data in one cell into three cells?
example:
From
(A1)100 CARIBBEAN VILLAGE DR
To
(B1)100
(C1)CARIBBEAN VILLAGE
(D1)DR
Not all the data is the same, some have more words than others.
View 4 Replies
View Related
Aug 7, 2008
What I got going on is a program I use for reporting is shooting out information.. while most of the information it sends to an excel workbook is sectioned by cell, there is a good chunk of information that's dumped into 1 cell. Is there a macro, or something, I can do to separate the information in this single cell, into separate cells? Auto Merged Post Until 24 Hrs Passes;Here is an example of the report. You'll notice a bunch of information in the 'Description' section. What I want to be able to do is run a macro that will seperate the 'Item Number', 'URL', 'Serial Number', 'Model Number', and 'Details' information into seperate cells.
View 2 Replies
View Related
Oct 26, 2013
Original table:
Column1
Column2
Column3
Column4
AAA
DDD
A1
X123, Y123, Z123
[Code] .......
View 1 Replies
View Related
Apr 11, 2014
My data set consists of 10,000 rows and 5,000 columns. I want to search the Used Range and replace all cells which say "NaN" and make them blank.
Any code i currently use takes way too long.
View 14 Replies
View Related
May 5, 2009
Search multiple cells for certain string and then replace the text of the entire cell with new text. For example the text may contain:
"A Chestnut Leather Satchel Binocular Case "They'll Fight Over When You're Dead" (Binocularcase-SL-CH)"
I want to search for SL-CH and once that is found I want to replace the contents of the entire cell with the following: Satchel Chestnut (SL-CH)
View 4 Replies
View Related
Jul 26, 2007
I need some sort of code to check through a selection of cells in a column and make those cells "zero" whose value is equal to the first cell in the selection. e.g., let's say I have a key value entered in cell e6 = "2.99".
E6 F6 G6 H6 I6 J6
2.99 5.25 2.99 2.00 2.99 5.00
So the macro should be able to check the value in cell E6 (i.e. = 2.99) against values in cells from F6: J6 and any cell having the same value as cell E6 (2.99) should be made = 0. So, in the above example cells G6 & I6 will have "0" value after the code has been executed. I have close to 50 rows going down starting from cell E6. For example, E7 has a value which has to be checked against the range starting from F7 to J7 and so on and so forth.
View 3 Replies
View Related
Jun 30, 2013
I'm working with a document that has several cells which require double carriage returns within cells. The location of each space is marked with an @ sign. A few weeks ago, I found an article online that explained how to do a find replace where the find value was '@' and the replace value was a series of numbers/characters that created a carriage return. When I doubled the carriage return code I got my two spaces. If I remember correctly, the string that I entered still appeared in the cell, so I needed to clean up afterwards by replacing that string with ' ', but it still left the line break.
View 9 Replies
View Related
Oct 18, 2005
I am currently creating a formula/function to insert a value in once cell into many cells using excel 2003 , for example: cell A1 has a value 100 000 000, and the value is going to be inserted, into B1,C1,D1,E1,F1,G1,H1,I1,J1.Each cell will only have one digit only so B1 will have 1, C1 will have 0, D1 will have 0 and for the rest of the cell will have the same thing instead of whole value.I tried this thing with the MID function and it works as long as the source value cell is 9 digits(filling the cell from the B1toJ1), it became my concern when I changed those value less then 9 digits,say 8 or 5 digits where the cell will receive the value are B1 to F1 if 5 digits or B1 to I1 if 8 digits, the rest of the cells are blank.
Are there any possibilities, solutions if the inserted value can be started from C1 to J1 for 8 digits or F1 to J1 for 5 digits etc (less than 9 digits) instead of B1 to I1 (8 digits) or B1 to F1 for 5 digits?
View 14 Replies
View Related
Mar 5, 2012
I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
View 4 Replies
View Related
Mar 18, 2009
I am trying to create a macro where it finds a a certain word in a column for example C. What i want it to do is find anything that says FWD_EUR and then replace that cell (e.g C2) with CASH_EUR_FWD and after it has done that it replaces the adjacent cell (e.g. D2) with EUR_FWD. I then want this to do the same with FWD_USD to CASH_USD_FWD and adjacent cell to USD_FWD.
View 2 Replies
View Related
Oct 16, 2013
I want to link cells B1 thru B16 to Cells F1 thru F16 receptively.
However, at times I need B1 thru B16 to show other columns 1 thru 16.
I would like to type in the column designation in A1, ie. F,G,H,I.....and have the values of those columns shown in B1 thru B16.
View 2 Replies
View Related
Aug 25, 2008
I need to put an extra "spacer" cell in each row that contains either 8 or 9 blank spacer cells in columns A through H or A through I, respectively, so that everything in those rows shifts to the right by one column. The problem is that all the other rows don't need any extra spacer cells. There is no pattern to the rows that need the extra spacer cell (such as every 5th row, or something).
View 3 Replies
View Related
Feb 9, 2013
I would like to have my macro code search column A (supplier numbers) and split the rows into groups of rows of 5 or less and then insert 3 blank rows between each group of rows. The split needs to start on a new supplier number and cannot split a supplier number into two different groups. Here is a sample:
Supplier
Invoice Date
GL Date
Invoice Amt
[Code].....
View 1 Replies
View Related
Apr 1, 2014
I will have a list of unique values. For each unique value, there is an indicator that tells me how many lines of information I need. Based on that criteria, I need a macro to insert that many rows and populate it with text. This will ultimately become a look up table that I will just use index/match function to populate.
I've attached a sample sheet. I'm not sure if I need a macro to insert rows or a macro to paste a copied range. Or maybe I need a mixture of both with a formula to calculate the number of cells I need?
View 9 Replies
View Related
May 18, 2009
I have over 16000 cells with different information in them, each cell is unique. There are parts of these cells that have similar information.
I am looking to search part of the cell, and replace the whole cell with my new description, so I can run pivot tables on it.
View 9 Replies
View Related
Jul 31, 2006
Here's my problem. I have a cell where there are many data strings seperated by ",". Each data string has a seperate value of its own like for e.g:
A2: aa,ab,ac
String Value
aa 1
ab 1
ac 3
What I want it accomplish is that, split the A2 cell into the different data string entities seperated by ",", then get the corresponding value of each of the data string entity, and to take the average of all the values of the different data string entities.
View 9 Replies
View Related
Dec 22, 2009
Here is the scenario:
A B C D
BananasApplesOrangesTotal113=A1+B1+C1
I need to reference the formula in D1 with the cells headers names.
In a perfect world, it would take
=A1+B1+C1:
and produce:
=Bananas+Apples+Oranges
View 9 Replies
View Related
Nov 17, 2008
The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))
View 9 Replies
View Related
