I have a colum full of durations in 00:00:00 format. I need a forumla to look at these durations, count the seconds and then multiply those seconds by a predfined rate. In effect giving me a second colum full of costs.
I have attached a screenshot f the data, and the rate should be 0.0073p (.73 of a penny)
Autofill column B with sequential values based on whether value in column A changes its value.
I would like to autofill column 'B' with sequential values (i.e. GenoMap1, Genomap2, Genomap3,... GenoMap10, GenoMap11, GenoMap12,... GenoMap104, GenoMap105, etc...), but changing to the sequential GenoMap# only when the value in column A changes.
This is what I imagine.
A1 "Alfiero", B1 "GenoMap1"
A2 "Alfiero", B2 "GenoMap1"
A3 "Alfiero", B3 "GenoMap1"
A4 "Allocati", B4 "GenoMap2"
A5 "Amaranto", B5 "GenoMap3"
A6 "Amaranto", B6 "GenoMap3"
A7 "Amaranto", B7 "GenoMap3"
A8 "Ambrosiano", B8 "GenoMap4"
A9 "Ambrosiano", B9 "GenoMap4"
A10 "Ambrosiano", B10 "GenoMap4"
A11 "Ambrosiano", B11 "GenoMap4"
I listed examples above of GenoMaps higher than 10 and 100 to show how I need them numbered.
I'm using MS Excel 2007 in Windows 7.
I have attached a sample spreadsheet what I want to do is insert a column before the current column A and move the current column D in to it and auto fill for every non blank cell in column B. Also, there are different values in column D such as B03 ,B41 etc so for example, it should auto fill B03 until it comes across either a blank cell in column B or it comes across a B41 and then it should do the same until it comes across a B42 or a blank cell again. This needs to continue till the end of the report.
View 2 Replies View RelatedI have a Listbox that outputs data to Column A. Is there a way to auto populate Column B with 4 items for each Entry in Column A?
The 4 items that will populate in Column B will always be the same.
I have attached an example to better explain what I am trying to describe.
I want to Autofill a Column C to repeat a set of data in Column A, if Column B contains an integer, as shown below. Being able to Autofill this data allows me to have a dynamic table for use on multiple projects that may have a different amount of rows in Column B.
Outflow % Table
25
50
[Code]......
I want to change the following code so that it fills a row instead of a column
[Code] ......
This fills column "A" top down but I now would like to fill row "1" left to right.
I have code to fill down to the last row with data for 1 column Can I adapt the code to fill down more than 1 column. current code for 1 column
View 2 Replies View Relatedthe code as shown below so that in column A of worksheet: Data to Text I need an AutoFill from cell A1 to the last row. The value in cell A1 needs to be: 1
If there are more than 1 records then I need an AutoFill from cell A1 to the last row. However, the value in cell A1 needs to be 1, value in cell A2 needs to be 2, value in cell A3 needs to be 3 etc...
I have a column with numbers ranging from -5 to 250. I want to write a formula to correct the numbers in the next column. If the number is less than 0, I want to replace it with 0,if the number is greater than 150 i want to replace it with 150 and if the number is in the 0-150 range it should be kept the same. Is there a way to use inequalities in a formula to do this??
View 2 Replies View RelatedI have a set of costs in column c (more that shown below) that have an indicator - for example 0 or 30 (there are more).
I need to populate rows 18 and 19 with the sumif - i have other tables where it is a straighforward sumif as the periods align, here though I need to check that the periods (rows 4 & 16) are checked and then the right data entered underneath.
I can't find a way to combine the sumif, with an if statement checking that the period is correct too? ...
The code below inserts a formula into E2, copies it across to column O and then down to the last row. It works fine but if more columns are added obviously it would need to be changed to go up to column P for example.
How can I change this so that the formula will be copied across to the last column automatically and therefore the code will not need to be changed?
Code:
Dim LR As Long
LR = Range("A" & Rows.Count).End(xlUp).Row
Range("E2").Select
[Code]....
I have a spreadsheet with a varying number of columns with data.
Now I like to copy the header over it till the last column that contains data.
If I used the recorded VBA the range is stated in letters (In the sample below column K but this can be any column).
What is the best way to code it in such a way that one gets the headers till the last column used?
Range("A1:B1").Select
Selection.AutoFill Destination:=Range("A1:K1"), Type:=xlFillDefault
So yesterday I created a thread [URL] ..... that would clear a specific content if a date (or rather a day) matched the criteria.
Today I'm continuing with that document and need to sum the columns if the date in a row is the correct month and year.
Ex. Row 1 contains the date "yyyy-mm-dd" and row 2-5 contains empty cells or the value x. The x values are all random placed.
So, I want to sum all the "x" for February 2014.
I'd rather use a formula here than a macro/VBA-code but anything will do. I have tried myself with =sumifs and =sumproduct but with no success.
See attached file for example and for my =sumproduct formula.
Excelforumexample1.xlsxβ
I have started a user form called submit stock. What i am trying to work out is if i can use this form to enter the data to the worksheet using the form to specific columns depending on the first choice.
View 8 Replies View RelatedI want to create a Macro that uses IF statements to enter the CORRECT VALUE into COLUMN βQβ in the ACTIVE WORKSHEET. I am providing an example of what the data set looks like at the very bottom of this post. I want to use a Macro as oppose to Formula in the worksheet because I want to turn the Macro into an Excel Add-In.
I want the Macro to do the following THREE THINGS:
1. IF the Value in COLUMN L is β0β THEN enter βn/aβ into COLUMN βQβ
2. IF the Value in COLUMN L is β2β THEN enter βn/aβ into COLUMN βQβ
3. IF the Value in COLUMN L is β1β THEN use a formula that looks like this:
= O8 + ( ( O8 / P8 ) * (First SUM the HOURS in COLUMN O for all the ROWS that have the SAME VALUES in COLUMN C and H and a β2β in COLUMN L and then MULTIPLY that Result against those rows with a β1β in COLUMN L whose COLUMNS C and H values match up exactly with those of the Summed Hours). The RESULT of the FORMULA would be entered into COLUMN βQβ. Once you look at the example at the bottom of this post it will definitely start making sense. I highlighted rows 8 β 11 for you in red in the data set at the bottom of this post just to center the attention on the rows I am talking about.
Here is an example of how the formula will work:
I will use ROW 8 from the data set below as an example. From the dataset I know CELL O8 equals 10 and CELL P8 equals 76. Now I will SUM the HOURS in COLUMN O ROWS 10 and 11 for ALL ROWS that have the SAME VALUES in COLUMN C and H in this case the values are βTimesβ and βPMβ and contain a β2β in COLUMN L which happens to equal 3, then that 3 should only apply to those rows with a β1β in COLUMN L whose COLUMNS C and H values match up exactly with those of the Summed Hours. So now I plug that into the formula: =10+((10/76)*(3)) and MY RESULT which will go into COLUMN βQβ IS 10.395.
Here the DATA SET:
Col A Col B Col C Col D Col E Col F Col G Col H Col I Col J Col K Col L Col M Col N Col O Col P Col Q Col R Col S Col T
Row 1 B ID Name Org Div T Number Model Make S Function E Function Type Description P ID OG Hours Sum EA P Hours Sum P S Hours EQ
This is what is happening in Column Q Explanation of Formula
Row 2
Times
Cont
2
28 28 n/a
n/a If formula populates Column Q cells with "n/a" if Column L cells contain a "0" or "2".
Row 3
Times
Cont
1
404 1194 413.4740369
O3+((O3/P3)*28) You get the Sum "28" by adding all the "P Hours" in Column O that match these 3 values:
1. The "Org" value of "Times" in Column C
2. The "S Function" value "Cont" in Column H
3. The "P ID" value "2" in Column L
[Code] ...........
I'm trying to autofill data in a column from one sheet to another in the same workbook. My goal is to be able to paste data in one sheet and have it appear in another sheet.
View 2 Replies View RelatedI have a spreadsheet that lists numbers in a column. They increase 1 number at a time, however the same number is listed 24 times before increasing to the next. Scaled down to 3 times it would look like this: 111, 222, 333, 444, 555, each one of those individual numbers would have their own cell. When I highlight the column and drag down, it starts doing decimals..how do I get it to recognize it? sample.xlsx
I want to drag it down to continue the pattern. Right now, I type a couple of numbers and drag to finish the section.
I want to write some VBA code that simulates the double click of the square in the lower right of a selected cell. When you double click it, it fills every cell in column A until the first blank in column B. I was able to find this code searching around:
Code:
Selection.AutoFill Destination:=Range("A10:A" & Range("B10" & Rows.Count).End(xlUp).Row)
Selection.Copy
The issue with the above is that it copies the data all the way down to the LAST row in column B with data.
I want to have the macro stop when it finds the FIRST blank cell in column B.
Just as an example, the last row of data in column B is 100, but in row 67 the cell is blank, so I want it to stop at row 66.
On Sheet1 I have a small list of names in column A and a number next to the name in column B. This number may vary.
What I want to do is on Sheet2 in column A repeat the name based on the number from sheet1 in column B.
Now the sheet is shared among all of us and macro are out. Is this something that is possible with a function?
I have the following VBA code that will copy data from one workbook to another.
Sub copytoanotherworkbook()
Dim smallrng As Range
Dim destrange As Range
Dim destWB As Workbook
Dim Lr As Long
Application. ScreenUpdating = False
If bIsBookOpen("P&WM Estimate Tracking Sheet.xls") Then
Set destWB = Workbooks("P&WM Estimate Tracking Sheet.xls")
Else
Set destWB = Workbooks.Open("N:Estimate SheetP&WM Estimate Tracking Sheet.xls")
End If
Lr = LastRow(destWB.Worksheets("Tracking Sheet")) + 1
Set sourceRange = ThisWorkbook.Worksheets("Links").Range("A1:L1")
Set destrange = destWB.Worksheets("Tracking Sheet").Range("A" & Lr)
sourceRange.Copy
destrange.PasteSpecial xlPasteValues, , False, False
Application.CutCopyMode = False
Application.ScreenUpdating = True
End Sub
The problem I am having is that when it copies the data to the last line of the destination workbook, I have a formula in column I of the destination workbook that calculates days remaining. How would I go about creating an autofill to fill the formula to only the last row of data? I've read some posts on this, but I don't think they deal with what I need.
I have an worksheet that refreshes every day from a .csv report. I would like to be able to have a comments column at the end that users type in. The problem is how to keep the comment next to the row it was on before the refresh.
When it refreshes there will be new rows, rows that are no longer there and all in a different order.
There is an Order Number column that can be used as an ID column.
B. start time C. end time D. Total time (military time)
Example: 2300 - 0300 = 4 hrs worked.
=IF(C19-B19>0,C19-B19,1+C19-B19)
I have a row for every date the hors is worked.
I cant seem to get the total hours to calculate correctly at the bottom of column D for a total hours worked in a particular pay period. It calculates a total up to 24hrs then reverts to zero. I have tried [h]:mm =SUM(XX:XX) and just about everything else I can think of and cant get it to calculate a correct total over 24 hrs.
I am trying to auto fill this formula down a column but it doesn't keep the C4,D4,E4...ETC to stay constant
I manually did these two correct ones
=SUM(C5*C4+D5*D4+E5*E4+F5*F4+G5*G4+H5*H4+I5*I4+J5*J4+K5*K4+L5*L4+M5*M4+N5*N4
+O5*O4+P5*P4+Q5*Q4+R5*R4+S5*S4+T5*T4+U5*U4+V5*V4+W5*W4+X5*X4+Y5*Y4+Z5*Z4+AA5*AA4)
=SUM(C6*C4+D6*D4+E6*E4+F6*F4+G6*G4+H6*H4+I6*I4+J6*J4+K6*K4+L6*L4+M6*M4+N6*N4
+O6*O4+P6*P4+Q6*Q4+R6*R4+S6*S4+T6*T4+U6*U4+V6*V4+W6*W4+X6*X4+Y6*Y4+Z6*Z4+AA6*AA4)
when I drag it down it incorrectly looks like this:
=SUM(C7*C6+D7*D6+E7*E6+F7*F6+G7*G6+H7*H6+I7*I6+J7*J6+K7*K6+L7*L6+M7*M6+N7*N6
+O7*O6+P7*P6+Q7*Q6+R7*R6+S7*S6+T7*T6+U7*U6+V7*V6+W7*W6+X7*X6+Y7*Y6+Z7*Z6+AA7*AA6)
I want C6,D6,E6 to be C4,D4,E4 ETC
DATA
DATE
PRICE
DATA
20120621
118.1000
[Code] .......
I have 3 columns (data, date & price). What I would like to do is find the last populated cell in 'date' column and autofill it based on column 'data'. The tricky thing is that the date form is text and while autofilling manually it changes.
I have over 9,000 rows of data. In column A, I have different values that I need to populate down to associate with values in other columns. I can't simply autofill all 9,000 cells in column A at once, because the values that need to be filled down change at irregular intervals.
My end goal is to be able to filter out values in column B to show their association with the value in column A, but I need column A fully populated.
So I need a way to fill A2:A7 with value from A1 (I don't care about B7 being empty, I can still have Martha in A7 with no adverse affects). But I need the fill to continue through 9,000+ rows where the number of rows to fill is inconsistent between value changes in column A (Martha-5, Sarah-3, Beth-4, Donna 3), and there are over 400 unique values in column A.
This is definitely more involved than I am familiar with, but any simple way for me to identify and list which of the 400 bakers made scones..
A
B
1
Martha
[Code]....
Master Template
Project 1
Project 2
Task 1
1 - Mar
28 - Dec
Task 2
2 - Mar
2 - Jan
Project Due
5 - Mar
4 - Jan
Above is a table we have for high level tracking on specific tasks due for projects.
What I want to do is: If the last cell in a column = Jan then it will automatically copy the whole column and insert it into a Sheet named January and have it automatically update. Below is the end result.
January Template
Project 2
Task 1
28 - Dec
Task 2
2 - Jan
Project Due
4 - Jan
1. I need a macro to find a unique number, say a 10 digit number starting with 4100.. and move it 1 row down and 3 rows to the left. It needs to look only in one column (E) for this number. This row contains several unique numbers, variable number of blank cells between them, all having 10 digits and starting with 4100.. - So the macro needs to repeat this for every unique number.
2)Once it does this, I need it to autofill the unique number in all the cells in column A until the next unique number is reached.
I have been struggling to find where my code is throwing up an error 1004 on the last line of the below code. I have a number of tables which will update automatically from Pivot tables on another sheet.
So the first part of the code is adding in the new column and then I want to autofill the date into the headers of the column which I thought the below would do, but I just don't understand why I keep getting the error. My data is dynamic as it will grow month by month which is why I am using R1C1 referencing.
Sheets("PNN Table").Cells(9, 16384).Select
ActiveCell.End(xlToLeft).Select
ActiveCell.Offset(0, -2).Select
Selection.AutoFill Destination:=Range(Selection, Selection.Offset(0, 1))
I try to do something like this
VB:
Sub autofill()
Range("A1").Select
Selection.autofill Destination:=Range("A1:A1048576 "), Type:=xlFillDefault
End Sub
but i need to select first cell in every 20th column and then execute autofill till the last row that excel provides. I can only do this manually but I have for now 125 columns to fill or to write some monstrous code. Unfortunately I do not have the knowledge to do this in a smart way and I guess there is an elegant way to solve this problem.
So I am putting togther a process matrix template for a Value stream analysis. I would use brute for and simple tricks to make this work but I am handing it off in two weeks to a student and I want this to be as strait forward and as easy to use as possible.
________C_______D_______E________F______G___
_____Part#1___Part#2___Part#3___Part#4___Part#5
Drill 1___1_______2________0_______3_______0__
Drill 2___0_______3________0_______1_______1__
Drill 3___0_______0________0_______4_______2__
Lathe 1__0_______1________1_______0_______0__
Lathe 2__1_______4________4_______0_______1__
Lathe 3__0_______0________5_______1_______0__
The first worksheet has a list of about 180 machines running vertically, and enough space for 20-50 part numbers to plugged in running horizontally across the top. The next three worksheets have the machines organized and grouped together by processes. I planned to use an Index-Match such as =INDEX('Individual Machines'!D$6:D$194,MATCH("Drill 1",'Individual Machines'!$C$6:$C$194,0))
The goal would be to get the user manually fill in the first worksheet, and then allow the user to use the vertical autofill function to fill in data on the later worksheets. This would provide a flexible template that can be re-used for different and various product families.
So populate something like this with a downward autofill for the number of times the part# hits a machine.
_______Drill 1___Lathe 2___Lathe 3___
Part#1___1________1________0____
Part#2___2________4________0____
Part#3___0________4________5____
Part#4___3________0________1____
Part#5___0________0________1____
