How can i copy contents of cells in desired format from one workbook to another in the following format with VBA code :
Code:
A!H1 to B!K1
A!H2 to B!L1
A!H3 to B!K2
A!H4 to B!L2
......
.......
I have code to copy sheets from one workbook to another, but how to maintain the order based on the Source Workbook.
Actually what i'm trying to do is copy all the Sheets named start with "_". FYI, i cannot use the Index of Sheets as well.
Code:
i = 0
For Each ws In Workbooks(xWBSource).Worksheets
If ws.Name Like "_*" Then
i = i + 1
sArrSheet(i) = ws.Name
[Code]...
I would like a code that will look for a workbook and then look in cell a5 and return number to a45 of active work sheet.
I would also need it to add a6 + a7 + a8 and return sum to a46
In the attachment, I have two different workbooks named 1099 and SJC. What I would like to automate if possible is to have Column F in 'SJC' autofill by matching the Vendor # (Column A) values to the '1099' Account Number (Column A). The values that need to be copied cover are located in Column C. Hope that is clear enough.
As an example:
I've highlighted one row in yellow to show what I need done. For Vendor No. A1W01 from '1099', the value I need copied over to Column F of SJC is 920.61. I need this automated because I have a collection of files like this that I need to link in this way and they are all quite large (the attached versions are stripped in order to meet the size requirements at this forum).
I am in the middle of writing my first macro using VBA, and have come to a point where I have no idea how to write a piece of code.
Here is an explanation of what the relevant section of the document looks like:
The following is all in Column A: ....
I am trying to copy a column of cells from one sheet to another, but also want to keep all the formatting. The origin sheet has times, but when I copy these to the destination sheet they are displayed as decimal numbers (using the code snippet below). I can change these back to times by formatting the cells using the format painter after the macro completes but I would like the VBA to do this for me. (using 2002 SP3).
View 4 Replies View RelatedI need a way to copy part of contents from a cell, the cell contains product information like size, name and weight of a product, and I need a copy the weight to be put in it’s own cell, here’s a copy of one cell “E65 MAPP SKDV 5 DIGIT 90G ST.K” the information I need from this is “90” the number is always followed by a capital G, but it’s between two and three digits where the lowest is 55G and the highest is 300G. Is this possible?
View 6 Replies View RelatedI would like to copy the contents of a cell from a sheet in workbook 1 into a textbox that is on a userform in workbook 2. This is what I have but I get a runtime error 438:
Code:
ActiveWorkbook.Sheets("ID").Range("a1") = Workbooks("Key.xlsm").userform1.TextBox1.Text
I need a macro to automatically copy the contents of a cell to a text box.
View 7 Replies View RelatedI have 2 inventory reports: what my store has and what my supplier has. I need to copy Tab1:K# to Tab2:T# provided that Tab1:A#'s contents match Tab2:A#'s contents. The A column represents the SKU of the item, but there is a difference in the amount of SKU's in each (my store sells ~6,000 items, supplier has ~10,000 items), so it's not as simple as sort by column A and copy pasting column K to column T.
For instance:
On Tab 1, A2's value is [1], K2's value is [9.38].
On Tab 2, A70's value is [1], K70's value is blank, but I need it to be [9.38], to match Tab 1's respective SKU.
I almost thought I had it figured out with VLOOKUP, but I cant seem to get it right... It doesn't reference the correct number.
Screenshots for reference
First tab, from the wholesaler: [URL]
Second tab, store's stock: [URL]
Basically lets say I have in cell A1 to A10 floor access data i.e. Users who used their ID cards to access a room.
Now the data always starts with either Rejected or Admitted then the user's name and then the card number and the access floor etc. the card currently has.
What I am looking for is that the macro should first check if the cell has Rejected or Admitted written in it - this I can do myself using =Left(A1,8) which should give me the helper column I need.
Then based on this I want it to only copy the name of the individual i.e. it should look in the cell and only copy whatever is written between "Rejected" and "(Card". The cell data is something like this:
Rejected Doe, John (Card #123456) at ABC 123 Floor1/Floor2/Floor3/Floor4 Door 1 [In] [Clearance]
I have a line of code that returns a run-time error 1004 whenever it is passed through. All I am trying to do is copy and paste. I am missing some glaring error? (It is only a selection of the code to highlight the part I am having issues with. "maxdate" and "d" have been set)
VB:
Dim ws, ws1 As WorkSheets
Set ws = ThisWorkbook.Sheets("Data")
Set ws1 = ThisWorkbook.Sheets("Target")
[Code].....
I have a loop function that goes through a list of employees and i want to move their name to a different sheet(monday, tuesday...) so that I know who is in on what day. is there a simple way to have it add the next name to the bottom of the list?
View 3 Replies View RelatedI have an Excel invoice set up and working well. It does a bunch of things with macros - e.g. on save it increments the invoice number well as creates a jpeg screenshot for the invoice archives. I have added an additional worksheet (titled 'VAT') to the workbook. The new 'VAT' worksheet has five simple columns; Invoice no, Subtotal, VAT, M.O.T. and Total.
What I need:-
On saving the workbook I would like to add a macro function that copys the final contents of the Invoice no (H2), Subtotal (C37), VAT (C38), M.O.T. (F38) and Total (I38) cells from the 'Sales Invoice' worksheet to the newly created 'VAT' worksheet in the respective columns. I would like this to be cumulative, i.e. continue to add the contents of the afore mentioned cells to the appropriate columns in the 'VAT' worksheet every time the invoice is saved. I would also like to have the Subtotal, VAT, MOT and Total columns summed and outputted in a cell of their own - but hopefully I can handle that.
if colum s has a n then can i copy that entire row to a new sheet
View 9 Replies View RelatedI'm trying to create a very simple order form. It's been a while since I've done this in Excel, and I couldn't find an answer when I searched. (I may be a lousy searcher, though.)
I want the user to enter a quantity in Column E of the "Common Items" worksheet, and have all the rows with quantities copied to the "Order" worksheet. (On the "Order" copy below, I just did a copy/paste to show the desired effect.)
Excel 2007
A
B
C
D
E
F
1
Item Number
Description
Unit
Price
Qty
Total
2
BX-2B1324X
0.9% NaCL 1000ml Bags
CS
$23.52
5
$117.60
[Code] ....
I'm pretty sure this can be accomplished with an If/Then, but I'm lost! Optimally, they'd enter their quantities, click on the Order sheet and hit print.
I have a worksheet where columns C, F, I, L, O record scores within a league. Each row records a persons score in that league and there are two rows per person recording their score and their handicap score. So Person A would be on rows 3, 4, Person B on 5, 6 etc. The persons name is recorded in Column B.
What I would like to do is to have a cell(s) elsewhere in the worksheet which show the highest score in that league and display that score and the name of the person who achieved it. This ideally would need to be done for the highest score and the highest handicap score.
For the life of me I can't even begin to work out how to do that or even know if it is possible in Excel.
So to clarify, lets say the highest score is in cell L7 and the highest handicap score was in M3. The cell(s) containing this formula should then show the name in B7 and the score in L7 and below it the name in B3 and the score in M3.
Setup: I have 2 worksheets with between 8 and 9,000 rows on each
Column A in both worksheets Sheet1 and Sheet2 have an email address in them.
Not all addresses in sheet1 will be on sheet2 and visa versa
Column J on Sheet 2 contains a date
What I need: Column M on Sheet1 is empty
I need a formula to place into Column M on Sheet1 that will
Look at Sheet1:A
Locate the corresponding value on Sheet2:A
Pull the date from Sheet2:J same row into Sheet1:M
i have a workbook with over 600 worksheets and any vba code to do the following.... (each worksheet contains different number of lines)
At the moment the data is in columns a to d
What i need is the data currently in cell a1 (in each worksheet) to appear beside every line in that worksheet
Then i need to take all this data and put it onto one single worksheet .
with some basic code. I want to check the activecell, if it's blank then copy the contents from the cell above, if it's not blank, leave it & go down to the next cell & repeat until last row.
View 7 Replies View RelatedI have a script that copies data to files based on many cells contents but where I am having a problem is creating series numbers for each file.
File-01.txt
File-02.txt
..
File-100.txt
In my current code I copy files to folders by date and each folder I need series of files (Lab Testing series)
In column A1:A100 I have a series of numbers 01, 02, 03 ...100
Column B contains the Files to be saved
C:LAB2012Jan1file-01.txt
C:LAB2012Jan2file-01.txt
C:LAB2012Jan3file-01.txt
C:LAB2012Jan4file-01.txt
...
..
C:LAB2012Dec31file-01.txt
So this works fine
I now need the Script to do is to loop to Column A and select Cell 2 and do the File Copy again on the Next series
C:LAB2012Jan1file-02.txt
C:LAB2012Jan2file-02.txt
C:LAB2012Jan3file-02.txt
C:LAB2012Jan4file-02.txt
...
..
C:LAB2012Dec31file-02.txt
When Complete repeat until it reaches the end of column A
Since my Cells are populated by all the data in the workbook I thought at the end of my copy script I would take the next Cells data in A and put it in Cell H8 where all the constants are for the file names.
Column B is built using
=IF($C1="","",$I$1&$G$4&$D1&""&$I$8&$H$8)
=IF($C2="","",$I$1&$G$4&$D2&""&$I$8&$H$8)
I'm using excel 2010 and windows XP with a moderate amount of experience tinkering with macro programming. I know what I need is very doable but I can't get my head around what the code would look like. I must not be wording my searches correctly because most of what I'm getting for results are iterative programs based on a cells value which isn't what I need.
I'm trying to build a macro that will check a cell (C3) and based on the contents of that cell copy a column (I) to one of 12 different columns (K:V). So if the value in C3 is 1 it should copy I to K, if the value is 2 it should copy I to L, and so on.
I would like a macro that copys the contents of a cell and pastes it into the column before it and continues to copy that same number downward as long as the cell next to it contains numbers. So: ....
View 9 Replies View RelatedS/W Environment: Excel 2010
Some of my worksheets are permission protected. They will allow me only to view the sheets - No editing, copy, cut, sort, add filter, etc. Is there a way to hack this and copy data (including formating) into other / new worksheets?
I have data beginning in cell A6 and continues through cell A13 for this instance. I want data in cell A6 on sheet 1 to be copied to cell B1 in sheet 2; data in cell A7 sheet 1 to be copid to cell C1 sheet2 and so on till all of the data in the continuous range beginning in cell A6 of sheet 1 has been copied to row 1 beginning in cell B1 of sheet2. This seams relatively easy but below is my failed attempt at this.
Code:
Sheets("Data Request").Select
Dim DATAREQUEST As Long, TYPESRws As Range
TYPES = WorksheetFunction.Max(Range("A" & Rows.Count).End(xlUp).Row)
DATAREQUEST = Range("A6", "A" & TYPES).Rows.Count
Sheets("Data Retrieval").Select
For i = Range("B1", "1" & DATAREQUEST).Columns.Count To 1 Step -1
Sheets("Data Retrieval").Select
[B1] = i
ActiveCell.Offset(1, 0).Select
Next i
Need VBA macro that will copy & paste (Special > AS VALUES) from one of two (Data A & B) sheets based on the contents of a validation cell ($D$4) in a third (Report) sheet? The destination starting cell would be $F$11. ALSO - I'd like to have the Named Ranges "DataAExtract" & "DataBExtract" used in the code (for the COPY region) so I can see an example of how to reflect my actual named ranges in my working file.
The reason for doing this is that the "c.Characters...." lines in my conditional formatting macros (attached) are not working on cells containing formula output (in my working file the Report page is all populated by VLOOKUP results), but the macros run fine on hard-coded values. In my attached workbook, I'd like to have the "NEW" macro for the copy & paste step fire first in the sequence of macros running after the FORM button-click (control located in cell $D$5 of the Report sheet), whether that's by writing a new macro and calling mine before the new one ends, OR by consolidating all of my macros plus the new one into one smooth progression.
With this low-tech approach I can get updated VALUES into the report area once the user selects a data source and a customer on the report sheet. The COPY ranges in my working spreadsheet will update based on the selections made in the report page. I tried recording a macro and then modifying the recorded code to add the "If > Then" functionality I'm looking for, but I'm pretty green when it comes to VBA code and syntax.
I have 2 workbooks. 1 is where data is entered called wksPB, the other is like a database workbook. The wksPB has data to be feed from column B to F and there is a dropdown.
what im looking to do is, if the combobox value is selected as Decline then it should display a messagebox that reference value in cell B is denied. if combobox value is Agreed then the macro should search the database workbook for the text entered in column b of wksPB and then copy data of C:E of wksPB to H:J of database sheet where that text is found and also the approver name in wksPB C24 to the approver cell of where that text was found. I've reached till finding the text but what I get my head twiting on is how to copy the text from wksPB column B:F to database sheet column H:K. Im attaching the sample workbooks and the code where ive reached till.
[Code] .....
Attached Files
Replacement Records - 2014.xlsx
forum file.xlsm
On one workbook I have "column A" that lists serial #'s, one serial number per cell. What I need is to be able to take all the non blank data from that column and copy it to another workbook with all those serial #'s in 1 cell numerically sorted and separated by commas.
View 1 Replies View RelatedI have numerous spreadsheets that I need to open and unhide a sheet, that has XML data stored in cell A1. What I need to do is copy that data in cell A1 and paste it into a text document and save that as an XML file saved as the XLS workbook name with a date stamp.
I'm running into many issues, the main issue is the saving as current file name, and the formatting of the text/XML file.
Here is my current code, which doesn't reference the current file name and is just very generic. Once I get the saving as file-name correct and the formatting of the xml file correct, I will work on it a bit more.
Code:
Sub Test()
Dim Rng As Range
Dim wb As Workbook
Set Rng = Range("A1:A2")
Set wb = Workbooks.Add
With wb
Rng.Copy
[code]....
I have attached a workbook stating my problem.
file1.xlsx