I use the following macro (found it in a forum) below to insert photos in Column A of my worksheet and it works great!
But I need a MACRO that will load hundreds of photos all down Column A. what code needs to be added in order for that to work? Im just a novice and have been searching for a Macro I can copy that will let me load hundreds of photos automatically.
[Code] ......
Looking for a way to insert small photos into a excel spreadsheet.Would it work with data validation or even a lookup table.The photos need to be inserted every 8th row.Is it best to name each photo?I`m not started yet as i not sure if this is even a possibility but if there are ways i will make an attempt...Maybe a VBA code could automatic insert them when a button is selected..they are 2 columns x 4 rows in size the photos
View 3 Replies View RelatedIn the link below, the video shows you can link a photo to a dropdown box. Is it possible to link 2 photos to 1 dropdown box?
[URL] ....
I have two sheets that i am working with sheet1 and sheet2.
I need a macro that will insert multiple rows in row 8 of sheet 1.
I also need it to copy the formula from row 8 sheet1 to every new row inserted.
the number of rows inserted will depend on colum A from sheet2.
*column A contains numbers, and the amount of numbers will vary. The data starts in A11 and continues down.
So for example. if sheet 2 column A11 and A12 and A13 are the only cells that contain numbers, then the macro will add 3 lines starting in row 8 of sheet1 and it will also copy the formulas from that row to every new row inserted.
I'm trying to figure out how to create a macro for a project at work. Basically, think of a spreadsheet with 5 tabs, but the information in Tab 1-Column D is the same in Tab-4 Column D and Tab-5 Column D. When I insert a row, though, I have to go to each tab, insert the row, and copy down the formulas from the row above to ensure the flow-through stays true. This can get very tedious.
Does anyone have a template or tips on a macro that would, in essence, work like this:
a) Highlight the row above which a row should be inserted
b) Trigger the macro
c) A row is inserted above the highlighted row in Tabs #1, #4 and #5
d) The information from the row above the inserted row is copied down to the new row in each of the three tabs.
I am trying to write a formula to insert in a macro for multiple lines of data.
Column B contains the date that I am comparing the date in Column C against. I want to be able to highlight the content on that row if the date in column C is greater than or equal to column B. how to write this?
Sample data:
3/12/20123/12/2012
3/12/20123/1/2012
3/6/20123/6/2012
2/29/20123/2/2012
I would need row 1 and 4 to highlight in red. this is part of a long Macro that is written and includes many other steps, but I cannot seem to make this step work correctly.
I found a macro code in this forum (Macro: Insert Sheet & Name As Cell Text first empty cell it should stop, but I do not know how to do that. (for example: If cells text is: A1: DOG, B1: CAT, C1: MOUSE then macro should create worksheets named DOG, CAT and MOUSE). I would save code to macro.xls file, in that file it would be also worksheet named LIST with cells names A1: DOG, B1: CAT, C1: MOUSE... in first row. But I would like to run macro on other files, so this new worksheets would be created in that new file and not in macro.xls where where macro and LIST are saved.
Sub AddSheets()
Dim strName As String
strName = Sheets(1).Range("A1")
Sheets.Add After:=Sheets(Sheets.Count)
ActiveSheet.Name = strName
End Sub
I am not sure whether "embedding" is the right word. Please have a look at this excel file and tell me how to make such a file? .....
View 7 Replies View RelatedAttached is what I use as a Calendar Macro and it works great for single active cell use.
I have a column for 'Notes' and I can only use 1 cell per item so every time I have an update about a specific item I go the to notes section and put a date and leave few spaces then type in whatever the notes are. Currently I'm doing it manually and I tried to use my macro on the Notes column and what it does is to remove everything in the cell and replace it with whatever date I choose in the calendar.
find a way to use my current Calendar Macro to add a date in the cell instead replacing everything in the cell with a date.
I'm trying to track information pertaining to employees across different worksheets in one excel file. I have one sheet that is the master list of employees. The first column of every worksheet is the same (employees names based on their location) but track different information.
I want to be able to create a macro button that will update all the worksheets if i insert or delete an employee from the master list. When a new row is inserted, the other worksheets should be updated as well with the new name and a blank row to be filled in. And when a name is deleted, the entire row should be deleted as well.
I've been using the following macro ....
View 8 Replies View RelatedIm trying to get the SPECIAL NUMBER to rename the photos(Column C) according to their names(Column B) and tried using index and match but some of them are giving me errors..
RENAME PHOTO.xlsx
I recently installed Excel 2007, and have shared others' joy in searching for things on the ribbon. I tried to record a macro to insert an autoshape. Excel creates the macro, but drawing the autoshape is not recorded. I'm sure I'm missing something obvious ...
View 7 Replies View RelatedNeed code to insert multiple rows. I would like to be able to click a command button and have the number i have entered in a textbox be the number of rows inserted in the spreadsheet above a static cell like A12.
View 2 Replies View RelatedI need to figure out a way to automatically insert rows and copy data on multiple selected sheets. for example, if i insert a row anywhere on sheet 3, i need that same row inserted in the same location with the cells populated with the same data on sheets 4, 6 and 9.
View 9 Replies View Relatedwhat I need is to insert the data in a cell, and instead of copying this same data to other cells in the same sheet or in other sheets, I need a way so that once I insert the data in one cell, it will be copied to the other cells at once.
For example, if I insert data in the cell [Sheet1,A1], it will be copied to [Sheet2,A4] and [Sheet3,E8] and [Sheet3,I7]
in inserting 8 rows as per the attached spreadsheet highlighted in orange, and labelling them, obviously, the year after the one above it.
View 10 Replies View RelatedI have a spreadsheet with about 10,000 lines/rows of text and I want to insert 4 lines/rows under each of these. way to do this efficiently without having to insert under every line/row?
View 9 Replies View Relatedhow to insert multiple tabs in the workbook?
i try this
Code:
Option Explicit
Sub Add_Multiple_Tabs()
Dim Tabs As Variant
Dim I As Byte
[Code]...
I am writing a simple VB app to allow my analysts to export data from a SQL table into an Excel spreadsheet. I have the following
lngRow = lngRow + 1
Do While Not rs.EOF
lngCol = 1
For Each objField In rs.Fields
objExcel.Cells(lngRow, lngCol).NumberFormat = "@"
objExcel.Cells(lngRow, lngCol).Value = objField.Value
lngCol = lngCol + 1
Next
rs.MoveNext
lngRow = lngRow + 1
Loop
The code works perfect... except... it takes far too long (as one would expect from iterating through 11,000 records cell by cell)
Is it possible to set the values for an entire row with one statement (or even better, the whole sheet at once), like maybe I have a string that is tab delimited or something
Does anyone have codes to insert and delete multiple rows. I need to run a macro where a dialog box pops up requesting number of rows to insert and delete.
View 9 Replies View RelatedI need have a folder with subfolders.
I need a macro to go into each subfolder: Open each excel workbook (which will usually contain one sheet), and insert a blank new row at the top of each sheet (without overriding existing row), filling it with headings like January, Feb....December.
way to automatically insert rows and copy data on multiple selected sheets. for example, if i insert a row anywhere on sheet 3, i need that same row inserted in the same location with the cells populated with the same data on sheets 4, 6 and 9.
View 9 Replies View RelatedI have a string of numbers ex. 1234, 5678, 91011 in 400 rows. Before each string I would like to add 88.
View 4 Replies View RelatedExcel 2007.
Insert - Object allows me to insert a object (display as icon is used). Is it also possible to insert multiple objects in one go? Via this option I can always only select 1 object.
I've a set of 10-digit numbers within a cell, which need to custom formatted in a particular format.
i.e., '1234567890' should be custom formatted to '123-456-7890' (for this i'm using the custom format 000-000-0000)
However, when I have multiple 10-digit numbers like shown in the trix (click here), i'm not able to format them because they are all comma-separated.
Do LMK if there is a workaround
I need to insert a blank row between each row of data under my headers (not the immediate row) until I reach the end of the particular table. I then move down to the next header and repeat the process.
My starting data looks like this:
HEADER
DATAROW1
DATAROW2
DATAROW3
-emptyrow-
HEADER
DATAROW1
DATAROW2
DATAROW3
I need it to look like this:
HEADER
DATAROW1
-emptyrow-
DATAROW2
-emptyrow-
DATAROW3
-emptyrow-
[Code] .....
I am trying to a input a list of cells in a column depending on what option i select from a drop-down list (or validation list) eg. If in A1 I select "fruit basket" (from a drop down or validation list) I then want this option to input in Column B Items located in another dynamic range eg. Apple, Banana, Orange, Grapes.
I have attached a sample of what I am trying to do to help explain my situation.
I find these forums a great key to learning the intricacies in Excel.
I am trying to automatically insert multiple (100) worksheets using VBA. The names I need each worksheet to be named are in a list in a separate worksheet in the same workbook. I found this site: http://www.mindspring.com/%7Etflynn/excelvba3.html and have been trying to adapt the following
Sub AddSheetWithNameCheckIfExists()
Dim ws As Worksheet
Dim newSheetName As String
newSheetName = Sheets(1).Range("A2") ' Substitute your range here
For Each ws In Worksheets
If ws.Name = newSheetName Or newSheetName = "" Or IsNumeric(newSheetName) Then
MsgBox "Sheet already exists or name is invalid", vbInformation
Exit Sub
End If
Next
Sheets.Add Type:="Worksheet"
With ActiveSheet
.Move after:=Worksheets(Worksheets.Count)
.Name = newSheetName
End With
End Sub
I am having difficulty iterating the code from cell A2 to A102.
I've got a long list of account numbers of varying length and ultimately need to add a dash and a dot into these numbers. Here's an example
12345678 to> 1-2345.678
123456789 to> 12-3456.789
1234567890 to> 123-4567.890
The standard format is always 3 numbers after the . and 4 numbers between the - and .
I can get to this by doing a series of functions starting with this:
=LEFT(A1,LEN(A1)-3)&"."&RIGHT(A1,3) to get 12345.678 or 123456.789
copy/pasting that value into another field and then doing this
=LEFT(E1,LEN(E1)-8)&"-"&RIGHT(E1,8) to get the results above
I can't quite figure out the format to combine the multiple steps/functions into one so that I'm not copy/pasting values and re-doing the function.