I am trying to write a formula to insert in a macro for multiple lines of data.
Column B contains the date that I am comparing the date in Column C against. I want to be able to highlight the content on that row if the date in column C is greater than or equal to column B. how to write this?
I would need row 1 and 4 to highlight in red. this is part of a long Macro that is written and includes many other steps, but I cannot seem to make this step work correctly.
I'm looking for a way to write a macro to insert 5 lines at the end of the data in column A. Then I want to copy a range into the newly inserted lines. I would press a button anytime I need this to occur.
Current last line of data A39
Need to insert 5 rows after A39
Then copy range BA30:CB34 into the newly inserted rows.
I have a spreadsheet where I am tracking several entries in a table that will keep growing. Three fields are Data Validation Drop Down Lists. The macro below works well to clear the two lists to the right when the first one is changed by the user.
[Code] .....
I want this to affect the rows below it in the table as they are added.
I have a worksheet that contains data arranged in fields from columns A to J. The relevant columns for the purposes of the macro are columns B (customer codes) and G (sales values). Column B may contain a single instance of a customer code, or multiple (over 50), depending on how active a customer has been. The worksheet always contains many different customer codes with varying numbers of rows for each customer, sorted by customer. What I'm trying to do is write a macro that will loop through the worksheet and insert a blank line immediately after a change in value of column B (customer code), and in this blank line, insert the customer code in column B (which comes from the cell immediately above), a sum formula for all values within a range that relate to that particular customer in column G, and an IF statement in column J that relates to the SUM formula. The loop concludes when there are no longer values in column B.
I have managed to insert blank lines on change in values in column B, but am not sure about the best approach for inserting the SUM formula or the IF statement in columns G and J respectively.
I have an excel worksheet that contains two sets of data. These numbers are then plotted onto a line graph to show the two sets of data against each other.
The graph is working fine, but only for a specific amount of data. The data is split into mutiple lines. From cells A1 all the way to BI1 is one row. I then have information in A4 to BI4. I would like to plot this information on a graph as a single continuous line. Is this possible?
Basically, My graph source is currently =Data!$A$2:$BI$3. This gives me two lines that I want. How do I get the data from A4:BI4 to join up to the first line in the graph.
I have a problem that i don't know how to solve. I have one cell with values like this: 127;71;512;458;1250;722;2154;742;29;350;
and what to put in lines like this:
127 71 512 458
Has i have a lot of data in the cell and everyday it changes, i take several hours doing it manually. I have tried using the command data/ text in colluns but because i have huge data it leaves a lot out. Do you have any idea how to put that values in lines automatically?
I've seen some examples here and I think I understand the consolidation function. However, my query has the added level of needing to consolidate each member:
I have a table of data that looks like this:
SURNAME NINO CODE NO OF UNITS
Smith AB123456C 8AIA 1986.4805
[Code] .........
There are a number of clients that have multiple investments that are shown by an alpha numeric code. I need to consolidate the number of units for each member in to one line. Ideally the output would look like this:
I have code that works well to insert a blank row. I need to remove all vertical lines each time it adds a row. You can see I commented out the line I tried.
Sub InsertRow() Dim LstRw As Long, ChkRw As Long LstRw = Cells(Rows.Count, "A").End(xlUp).Row Application.ScreenUpdating = False
For ChkRw = LstRw To 6 Step -1 If Cells(ChkRw, "A") Cells(ChkRw - 1, "A") Then Rows(ChkRw).EntireRow.Insert 'Selection.Borders(xlInsideVertical).LineStyle = xlNone End If Next ChkRw
I use the following macro (found it in a forum) below to insert photos in Column A of my worksheet and it works great! But I need a MACRO that will load hundreds of photos all down Column A. what code needs to be added in order for that to work? Im just a novice and have been searching for a Macro I can copy that will let me load hundreds of photos automatically.
I have two sheets that i am working with sheet1 and sheet2.
I need a macro that will insert multiple rows in row 8 of sheet 1.
I also need it to copy the formula from row 8 sheet1 to every new row inserted.
the number of rows inserted will depend on colum A from sheet2.
*column A contains numbers, and the amount of numbers will vary. The data starts in A11 and continues down.
So for example. if sheet 2 column A11 and A12 and A13 are the only cells that contain numbers, then the macro will add 3 lines starting in row 8 of sheet1 and it will also copy the formulas from that row to every new row inserted.
I am brand new and I don't know a ton about macros and programming in Excel.
What I'm trying to do here in this attached spreadsheet is at the end of inputting my line, I want to hit the tab (marked in red to make it clear where) button in the cell and have it automatically create another blank line but keep the formulas the same.
Basically I just want to avoid having to right click and insert line and then drag the formulas column by column down which is difficult.
See attached : TEST2_2014 Sales & Commission Spreadsheet.xlsx
I'm trying to figure out how to create a macro for a project at work. Basically, think of a spreadsheet with 5 tabs, but the information in Tab 1-Column D is the same in Tab-4 Column D and Tab-5 Column D. When I insert a row, though, I have to go to each tab, insert the row, and copy down the formulas from the row above to ensure the flow-through stays true. This can get very tedious.
Does anyone have a template or tips on a macro that would, in essence, work like this:
a) Highlight the row above which a row should be inserted b) Trigger the macro c) A row is inserted above the highlighted row in Tabs #1, #4 and #5 d) The information from the row above the inserted row is copied down to the new row in each of the three tabs.
I found a macro code in this forum (Macro: Insert Sheet & Name As Cell Text first empty cell it should stop, but I do not know how to do that. (for example: If cells text is: A1: DOG, B1: CAT, C1: MOUSE then macro should create worksheets named DOG, CAT and MOUSE). I would save code to macro.xls file, in that file it would be also worksheet named LIST with cells names A1: DOG, B1: CAT, C1: MOUSE... in first row. But I would like to run macro on other files, so this new worksheets would be created in that new file and not in macro.xls where where macro and LIST are saved.
Sub AddSheets() Dim strName As String strName = Sheets(1).Range("A1") Sheets.Add After:=Sheets(Sheets.Count) ActiveSheet.Name = strName End Sub
Attached is what I use as a Calendar Macro and it works great for single active cell use.
I have a column for 'Notes' and I can only use 1 cell per item so every time I have an update about a specific item I go the to notes section and put a date and leave few spaces then type in whatever the notes are. Currently I'm doing it manually and I tried to use my macro on the Notes column and what it does is to remove everything in the cell and replace it with whatever date I choose in the calendar.
find a way to use my current Calendar Macro to add a date in the cell instead replacing everything in the cell with a date.
I'm trying to track information pertaining to employees across different worksheets in one excel file. I have one sheet that is the master list of employees. The first column of every worksheet is the same (employees names based on their location) but track different information.
I want to be able to create a macro button that will update all the worksheets if i insert or delete an employee from the master list. When a new row is inserted, the other worksheets should be updated as well with the new name and a blank row to be filled in. And when a name is deleted, the entire row should be deleted as well.
what I need is to insert the data in a cell, and instead of copying this same data to other cells in the same sheet or in other sheets, I need a way so that once I insert the data in one cell, it will be copied to the other cells at once.
For example, if I insert data in the cell [Sheet1,A1], it will be copied to [Sheet2,A4] and [Sheet3,E8] and [Sheet3,I7]
I need to insert a blank row between each row of data under my headers (not the immediate row) until I reach the end of the particular table. I then move down to the next header and repeat the process.
In my userform I have a list of check box's that can be selected. Currently if more than one is selected, they will appear in the spread sheet in the same line one after another with a space between them. How do I make it so they either appear with a comma appearing after each, so the next value appears on the next line below or most perferably the cell turning to a drop down list with the values?
Current code
VB: If CheckBox1.Value = True Then ws.Cells(iRow, 2).Value = ws.Cells(iRow, 2).Value & " " & CheckBox1.Caption If CheckBox2.Value = True Then ws.Cells(iRow, 2).Value = ws.Cells(iRow, 2).Value & " " & CheckBox2.Caption If CheckBox3.Value = True Then ws.Cells(iRow, 2).Value = ws.Cells(iRow, 2).Value & " " & CheckBox3.Caption If CheckBox4.Value = True Then ws.Cells(iRow, 2).Value = ws.Cells(iRow, 2).Value & " " & CheckBox4.Caption If CheckBox5.Value = True Then ws.Cells(iRow, 2).Value = ws.Cells(iRow, 2).Value & " " & CheckBox5.Caption If CheckBox6.Value = True Then ws.Cells(iRow, 2).Value = ws.Cells(iRow, 2).Value & " " & CheckBox6.Caption
Spreadsheet current cell appearence if all 6 are selected ' Chinnook EH101 Lynx Puma Sea King Fixed Wing'
Required appearence: Chinnook EH101 Lynx Puma Sea King Fixed Wing
I have a column of cells with Customer info and address in each row, that I need to move into multiple columns. ie Cust name, acct #,address, city,state, zip the problem is ALL of the info for each customer is in ONE cell.To be clear, cell B1 has complete name address etc for one customer, B2 has the info for another, B3... on and on. To complicate matters as in the example, there is not a pattern in the lines. the first example shows the info beginning on the 2nd line of the cell, but the 2nd example shows info in the first line. I have tried the text to column fixed width. Didn't work because names and addresses are of varying lengths. Then I tried delimited, but there isn't a common separation between different data. I am using excel 2007. FYI I did go through many many threads and found some that were close to my problem but not close enough to work.
" JOES TOWING SERVICE [0123451] 123 STREET
CALEDONIA FL 12345 " "BUBBA / SHOP ACCURATE AUTO SUPPLY INC [0234567] 21234 HYDRAULIC DR
I'm new to Macros and below is my requirement.I need to split my data into multiple rows based on count and the first row should have the value but the other rows should have a value as zero.
I have a challenge where in have a list of about 4000 rows and each cell have mutiple lines. ( i know there is a thread about this but that did not address my issue).
So my data is as follows - (I have attached teh sample file)
"Pari bom - GP and CFO 02547895452 pari@gmail.com
papa bom - GP and CFO 23365789541 papa@gmail.com
mama bom - CFO 2587412589 pari@gmail.com
nana bom - CFO 2587412589 nana@gmail.com
masi bom - CFO 2587412589 masi@gmail.com
"
I want to be in a position to seperte each line in exclusive rows and then seperate teh name, number and the email ... the later eing easier but cant get my head around seperating the cells.
share a macro to copy cells from range C20:C300 and paste them in C2 on multiple lines. If possible two lines gap between each cell's value when they are pasted in C2.
I have an excel spreadsheet set up as shown in the attachment. When I insert data by using the macro (Insert farm), for some reason it puts a NA in a cell (C17). I then select the cell click into the formula and click enter and it works. how can this be fixed. Look at the excel spreadsheet to be able to understand.
I have a data set that I wish to look up the data from one column and if it is greater then 0 write it in another column separated by commas. Here is an example:
The data is dates that a service was provided and how many time that day it was done and not everyone gets the service on the same days. I would like to summarize the days of the month that service was provided not number of times into 1 cell.
A B C Row 1 November Row 2 1 5 15 Row 3 1 0 2 Row 4 0 1 3
November is in A3
If A2 is greater then 0 I want to write A1 A2 If A2 and A3 is greater then 0 I want to write A1 A2, A3 If A2 is 0 and B2 is greater then 0, I want to write A1 B2
I've got a problem that's causing me a headache. i have a document with 1 column and 4000 rows (its an export from active directory).
I need to do a search cell by cell (so A1 - A4000) for any cells that contain the text "changeType". When a cell is found, i need excel to insert a new row above the current cell and insert the text "modify" into the new row (in the first column).
