I have a workfile, containing dates in column C and values in column G.
The data is imported. In most instances there are no dates in line with the second value. I need VBA code that will insert a the same date in line with the first value below the cell where there is a date....
I would typically consider myself a decent Excel user, but I haven't been able to solve this one. Maybe it's just the lack of sleep now. I am attempting to combine 4 cells into one where the last cell contains a date. Below is the formula I am using:
=B3&" "&C3&" "&D3&" "&TEXT(E3,"m/d/yy")
It works when all of the cells have values, but the only problem I am having is that some of the dates (in column E) are blank. When this cell is blank the default date that displays is "1/0/00." If I add the typical, " " at the end it says the formula has errors. The need for the TEXT(E3,"m/d/yy") for the cells that contain dates is throwing me off.
I have a worksheet with four data columns A,B,C,D starting in row 2. I want to add between every row, exactly 11 blank rows. So if we have:
Code:
A B C D
1 5 3 4
2 7 6 3
3 9 1 3
the end result should be:
Code:
A B C D
1 5 3 4
2 7 6 3
3 9 1 3
Do I necessarily need a macro for this? Or is there another quick and creative way to achieve this result?
I have a spreadsheet that contains dates in column A, the number of rows between each date can vary. Selecting a cell with a date in will activate a checklist in the form of a UserForm.
I am trying to create a macro that will count the number of rows from one cell with a date, to the next cell with a date, and then resize the selection for printing.
So far I have this;
Code:
Sub test()
Application.ScreenUpdating = False
Set InitialCell = ActiveCell
[Code]....
My problem with this code is that when it reselects the InitialCell, the UserForm is reactivated. Is there a way to achieve the same results without having to reselect the InitialCell, and therefore the UserForm wont pop up? I tried adding the Unload UserForm1 line but it doesnt have any affect, the form still pops up.
I have the following formula which counts number of days between dates in two adjacent cells excluding holidays
=NETWORKDAYS(U311,V311,$AA$4:$AA$14)-1
The $AA$4:$AA$14 refers tote range where the excluded holiday dates are stored.
I have included the -1 at the end as it over counts by one day every time. i.e. if the same date is in both cells it counts 1
However if no date is in both fields it count -1 (minus one)
If a date is just in one field it counts a very high number, example below.
-1
16/07/2014
-29879
20/06/2014
08/07/2014
12
[code].....
is there a better formula to use for this? How do I get the result to show ZERO when both cells are empty? can I get the result to show number of days to present date where there is only a date in first column?
I have a formula '= COUNTIF(A1:A5,"<"&TODAY())' that counts the number of expired dates in one column. I want to include a second condition to this formula that will check if another column of dates are blank then they should not be counted. So if for example a1:a2 have expired dates, and b1:b2 have both got dates then they should be included in the count.
View 9 Replies View RelatedI have been using CountIfs with a lot of luck until I added one extra criteria that it ignores.
ORIGINAL FORMULA
=COUNTIFS(ADate, ">" & N$2, ADate, "=" & 10000, WBid, "" & N$2, ADate, "=" & 10000, WBid, "
http://img177.imageshack.us/img177/2797/exceluf7.th.jpg
See above spreadsheet (some data has been blanked out for data protection)
I have column L formatted as a validation list with two options 'Open' and 'Closed'. What I want to happen, is when I select closed from the list, the "Date Closed" cell to the right (column m) changes to the date that Closed was entered, and does not change thereafter.
As you can see in the pic, all the close out dates are todays date. . . I need it to store the date it was closed, and not constantly update it.
How can i make a macro that inserts todays date, tomorrows date, the next day and the day after that??
View 2 Replies View RelatedLooking for assistance in inserting 24 blank rows in between a column of names. And if not too much trouble have the ability to enter the number of blank rows to insert.
Before:
Column A
name1
name2
name3
etc.
After:
name1
blank row
blank row
etc.
name2
blank row
blank row
etc.
name3
blank row
blank row
etc.
I have a simple time sheet that I want to insert weekly dates by the date I have. I don't know the formula for that. I've attached the time sheet. TimeSheet2.xls
View 10 Replies View RelatedBelow is just a part of my very long list of statement that I posted into column A, B and C of excel worksheet:
10
67.12
03-Oct-12
10
85.16
02-Oct-12
[Code] ........
Any formula or macro that can automatically change to below expectation such as inserting 3-blank rows, totaling and sorting the date.
10
85.16
2-Oct-12
10
67.12
3-Oct-12
[Code] .........
I'm making a budget in excel.
I have generated some dates that appear in column a. I want to make a macro that copies lines from sheet 2 and inserts them between the appropriate dates in column a sheet 1.
eg:
A
1/1/01
23/1/01
4/2/01
5/2/01
7/2/01
sheet2:
2/1/01
23/1/01
6/2/01
outcome:
A
1/1/01
2/1/01
23/1/01
23/1/01
4/2/01
5/2/01
6/2/01
7/2/01
the lines will also have 2 other fields for copying (description and amount).
I will also need to copy formulas to the inserted rows in some columns (eg balance) but not all (not the date column).
I'm a novice in VB and can't work out how to solve the following problem:
I have imported NMEA-data in text format from a GPS into Excel. This data is acquired in real-time at 10Hz, which borders what the GPS in capable of calculating. As a result the data isn't quite reliable enough - there are strings missing and some lines have been skipped by the GPS. This is a typical example of what sometimes happens: ...
I would like to know how can i insert a blank row in between ACC# when ever a new series of data begins
name Acc # Balance Date
John 2222 200 june 2013
John 2222 344 june 2013
John 2222 700 Sept 2013
Silva 4444 333 June 2013
Silva 4444 333 June 2013
Silva 4444 333 June 2013
Raff 5555 897 June 2015
Raff 5555 897 June 2015
Raff 5555 897 June 2015
Raff 5555 897 June 2015
I've got a spreadsheet that I prepare for a group that has patient data subtotalled by physicians. The problem is that the group uses this data for data entry and wants a blank row between each different patient name within the physicians subtotals and I have no clue how to get there. Any chance there might be some VBA code that could accomplish this?
View 4 Replies View RelatedI need a code that when i place a date in a cell D10 (Example:25-January-2013) it will then add 40 days of dates daily to AP10.In D9 can it also add the weeknumber (every 7 days the weeknumber increases by 1) corresponding to the day date in D10 (iso).Can this be attached to a button.Enter the date in D10 then press the button and the dates auto insert across the sheet daily to AP10.
Can the button say ADD DATE or REMOVE DATES.First date in D10.When the button says REMOVE dates all dates deleted when button pressed and cell D10 then says "add date here".If no date is placed in D10 and ADD DATE button is pressed a warning messagebox appears and says NEED TO ADD DATE .Will not work until date entered.When date entered in D10 "Add Date Here" disappears until REMOVE Date button is selected and again "Add Date Here" is displayed....not sure if this is possible but would be good if achieved. Excel 2010
I need to alter this code in order to do 2 things
1. to leave a blank line inbwteen Shop A's Apples, Shop A's Pears etc
2. I also wanted to total up the price totals....(see example below).So if the last price was in E4, the total of all those prices above would show in F5 ....
firstly i am cross-posting this topic so here is the URL to the same thread in a different forum.
[url]
whats up everybody? i have to use two excel worksheets that someone else already created to make CSV (comma seperated value) files. these CSV files are to be dumped into a database. the problem is that the table has more fields than the spreadsheet does (the spreadsheet has 3 fields - network, mask, size - and the table has 10 fields). i can insert one entire column before (to the left of) network (for the ID field in the table) without a problem, but when i try to insert entire blank columns after size (to the right of the pre-existing columns) it only makes columns for the first 14 rows. i know this because when i save it as a CSV file there are only 6 extra commas for the first 14 rows. is there a way to insert an entire blank column for the entire spreadsheet (as in all the way to the bottom)? i dont want to have to manually type in all those commas. i am using excel 2002.
I am trying to insert a blank row into a table (created using the table function in Excel 2010) without the copying the formulas. Every time I insert a row the the formula is copied.
View 3 Replies View RelatedI am working on formatting a spreadsheet report where the values will change in column A. Here is what I would like to do via a Macro. Compare the cells in column A (e.g., compare A2 to A3, compare A3 to A4, and so on). If the values between the two cells in column A are different, insert three blank rows and set the active cell to the next cell following the blank lines. Example:
if cell A5 is different from A6, insert three blank rows below row 5 and new active cell is now A9 and the comparison would start again. I have been trying to code the macro for this but with no success. Here is the macro I have been working on.
Sub Macro1()
Const NumRow As Integer = 3
Dim StartCell As Range
Dim RowNR, NewCnt As Long
Dim RowCount As Long
Dim Count As Long
Dim intRow As Integer
Dim bFmtComplete As Boolean
RowCount = Application.WorksheetFunction.CountA _
(Range("A1", Range("A" & Rows.Count).End(xlUp)))
bFmtComplete = False
RowNR = 2
Range("A1:J1").Select
' Rows("1:1").Select
Selection.Copy................
Ok so my named range looks like this:
[Code]....
However, I want to ignore the "" cells and the truly blank cells... However, I think all of them will have "" since I have this formula in all of the ones I'm putting in the range:
[Code]....
How do I go about getting these results into a named range so I can use it on validation since validation only seems to ignore truly blank cells and not the "" ones.
I would like to know if it is possible to find the red dates above preferably without a macro.
Check if the below array is empty and then output the date where u have the first non blank value.
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedI have sporadic cell values in a column. I will be describing the lamen logic I use to fill in these blanks manually. Find the first nonblank cell in the column, then look for the next nonblank cell in the column. I count the number of blank cells in between. If even # of blank cells, then I give the first half of the blanks the value of the first nonblank cell and the second half of the blank cells the value of the next nonblanck. If odd # of blank cells, then I do the same with the exception that the odd cell that falls in the middle will be randomly designated the value of the either first or second nonblank cell.
View 4 Replies View RelatedI can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedI presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
Here's what I'm attempting to do: For each column, X,Y, Z, I am attempting
to count nonblanks. However, the data was imported from Access and Oracle,
and Excel treats what appear to be blank cells as nonblanks. I've tested
this theory by highlighting a couple of "blank" cells and deleting them, and
my count changes. So, can I get Excel to put a value into my "blank" cells,
so then I could filter it out, or create a formula that would only count
dates in my columns (which is what I'm after).
This is what I'm looking at:
A B C
1 2/4/2006 2/6/2006 ("blank")
2 ("blank") 12/13/2005 1/7/2006
3 2/20/2006 1/15/2006 ("blank")
In each column if I use a COUNTA I'll get a total of 3, instead of 2 for A,
3 for B and 1 for C.
I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.