I'm desperatl seeking help as im trying to get the following macro to run on all available tabs in my workbook.
Sub Scroll()
Application.GoTo Reference:=Range("A1"), _
Scroll:=True
End Sub
I've tried this script but it does not seem to work
Sub Test()
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
ws.Application.GoTo Reference:=Range("A1"), _
Scroll:=True
Next ws
End Sub
I am working on a macro that copies tabs from the spreadsheet the macro (button) is located in, creates a new book for them, and then pastes values so that no formulas still exist. The problem I am having is with named ranges. The named ranges do not reference the new sheet, but rather the old spreadsheet. This is fine because the new file is solely for presentation, however, one macro (which selects print ranges based on user selected checkboxes) tries to reference the old spreadsheet once it runs. I would like the macro that I currently have working, to also make this macro in the NEW spreadsheet so that it can still highlight the correct print area when used. The macro does not reference the name of the workbook at any point, it is purely "Range("ai10") type references so I don't understand why it is trying to open the old sheet back up.
View 2 Replies View RelatedI have been trying to get Excel (2007) to change the colour of tabs to match other tabs in the workbook
Using this code I get the colour code of the current tab
Code:
x = ActiveSheet.Tab.ColorIndex
But when I use this value in a procedure like this:
Code:
ActiveSheet.Tab.ColorIndex = x
The tab is a different colour!
I have a summary page that includes the titles for each tab within the excel 2003 workbook. I want to use the names of the tabs in the summary page and create it into a formula to lookup fixed cells within the various tabs. Sorry for not uploading an excel doc but I was at work earlier and the thread did not load for some reason, so I am reposting it.
View 3 Replies View RelatedI have a worksheet that I am always adding sheets to by duplicating an already existing tab. The tab ,"Current Invoice", is nested between sheets called "first" and "last". All duplicate sheets will also be nested between the "First" and "Last" tabs. What I would like to do is have a macro that affects all tabs between the "First" and "Last" only, even when the bookend tabs are hidden.
This is what I've started with.
HTML Sheets(Array("First", "Last")).Select
ActiveWindow.SmallScroll Down:=18
Range("U29:U190").Select
Selection.Copy
Range("AA29").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("W29:W190").Select
Application.CutCopyMode = False
Selection.Copy
Range("AB29").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
I would like this Macro to run on 6 different tabs in a worksheet as one Macro. It is currently only running on the active sheet. The tabs that I need it to run on are labeled "Totals" "New" "Used" "Service" "Parts" "Other Income-Ded"
Sub ExpenseAnalysis2012()
Dim rngSource As Range
Dim rngDestination As Range
Set rngSource = Range("D3:E90")
Set rngDestination = Cells(3, Columns.Count).End(xlToLeft).Offset(0, 2)
rngSource.Copy
rngDestination.PasteSpecial (xlPasteValues)
End Sub
create a macro that will delete tabs that ends with the word "OPEN" from a workbook?
View 9 Replies View RelatedI had in my macro toolbox a macro where in column A I listed names for worksheet the macro would then create and name the worksheets from the list in Column. But unfortunately our share drive where I kept the toolbox crashed and all the data was lost.
View 1 Replies View RelatedI'm new to Macros and need your help. I've read online but can't find instructions on completing what I want.
I have a workbook with about 60 tabs that has various numbers of rows. I want a macro that will combine all the rows from each tab onto a new tab.
Is there an easy marco that i can do to acommplish this?
is there any way that i can adjust this code so that if there are not enough worksheets in my workbook to support my list that more worksheets will be made and renamed? Specifically I would like to copy the first worksheet and then rename it based on my list. also... If I have more worksheets than my list requires it can delete unused worksheets?
Sub NameSheets()
Dim i As Long
Dim ws As Worksheet
i = 1
For Each ws In ActiveWorkbook.Worksheets
If ws.Name "Sheet Names" Then ws.Name = Sheets("Sheet Names").Cells(i, 1)
i = i + 1
Next ws
End Sub
I have a list on "Sheet Names" that changes the tab names on each sheet when i run the macro
I am badly in need of a macro that will create 3 tabs using a value in sheet1 cell a1.The tabs created should be unique in the workbook and no sheet has to be duplicated or cancelled.After creating the tabs the macro should also create a list of the 3 tabs created in a sheet called list.
View 8 Replies View RelatedI have a spreadsheet with a table of data. Each row needs to have its data on a separate tab, so they can be presented in idividual reports. Each tab then needs to be given a name which corresponds to the values in the column A from the spreadsheet.
I can generate a new tab with the following:
Sheets.Add After:=Sheets(Sheets.Count)
Sheets("Sheet1").Select
Sheets("Sheet1").Name = ""
But I have a few issues with this... Firstly, the number of new tabs required will change, so it needs to replicate the formula for the number of entries in the reference table. Secondly, this relies on the new sheet being "sheet1" which I'm not happy with in case someone accidently creates a sheet 1 by hitting the new tab button. I then don't know how to give each one a separate name based on column A from the reference sheet.
I am trying to find a library with vb/macros that can hide and unhide all worksheet tabs except one, the formula, and the menu bar.
View 1 Replies View RelatedI'm not very good with macros and I need to create a macro that copies data from one excel worksheet into multiple other worksheet tabs in the same workbook. I have 8 columns and thousands of rows of data. The spreadsheet is sorted by column E.
In column E, there are about 25 different values going down throughout the spreadsheet. I would like the data for each of these Column E categories to be copied over to a new tab in the spreadsheet with the tab name as the value in E. So in the end there would be the main tab, and then 25 new tabs with the filtered data. Does anyone already have a macro that will do this?
I need a macro that import tabs from a file into another file.
View 1 Replies View RelatedI need to create a Worksheet within a macro that has 10 tabs. I had something running, then I made some changes and I got Application-defined or object defined error.
Sheets("Sheet1").Name=Sheetname(1)
Sheets.Add after:=Sheets(Sheets.Count)
I was looping thru this up to 10 now its not working. This isn't too complicated,
Just a quick on i hope. Im trying to create a macro that adds a worksheet/tab and Rename it to the month after the tab already showing.
e.g
if i already have two tabs one dated january and the other named february i require the macro to say march then the next run would be april if you get my drift.
I would like to create a macro that would bring up an input box or preferably a list box that will allow me to input information for a sheet/tab name where where "TBL NPL NGRPL" appears in the code at the end of this message. The macro needs to be available to any new file created
The only worksheet names needed are below.
TBL NPL NGRPL
TBL NPL NIAU7
TBL NPL NIAU8
TBL NPL NIA10
TBL NPL NNDU4
This is the extent of my ability:
Sub Macro1()
Sheets("Sheet1").Select
Sheets("Sheet1").Name = "TBL NPL NGRPL"
Range("A1").Select
End Sub
I created six macros, but there must be an easier way.
I have looked through alot of this board and see the codes to hide all tabs old and new and code for each sheet.
My question is:
Is there a macro that can be used to do this as well. Say a button to hide all tabs and a button to show all tabs or does it only hide/show when the workbook is re-opened?
Macro to Run all tabs in a workbook and prompt a pop up asking about sheet protection for each tab, such as Select locked cells, and select unlocked cells.
View 8 Replies View RelatedI have a macro that takes data in rows 1 through 500 from many tabs and collects them in the summary tab.
I would like to write a macro that only selects rows that have data in Column A. Therefore, reducing the number of rows copied from all tabs from 500 to only a few that contain data that I really need.
This is what i currently have:
[Code] .........
I'm trying to figure out how to create a macro for a project at work. Basically, think of a spreadsheet with 5 tabs, but the information in Tab 1-Column D is the same in Tab-4 Column D and Tab-5 Column D. When I insert a row, though, I have to go to each tab, insert the row, and copy down the formulas from the row above to ensure the flow-through stays true. This can get very tedious.
Does anyone have a template or tips on a macro that would, in essence, work like this:
a) Highlight the row above which a row should be inserted
b) Trigger the macro
c) A row is inserted above the highlighted row in Tabs #1, #4 and #5
d) The information from the row above the inserted row is copied down to the new row in each of the three tabs.
I have a worksheet that contains about six different tabs. When this form is completed some users might want to have certain tabs copied into a different workbook. Unfortunately each user might want to copy different tabs. I was wondering if there was a Macro that I could write that would ask the users which tabs they want to copy into a new workbook.
View 4 Replies View RelatedHow do you add a macro to a cell that works wen the user tabs out the cell?
View 9 Replies View RelatedI havae the following macro which i recorded in Excel. I want this Macro to run after another macro that groups data and creats tabs. The following macro will then add a column and run an array formula. I think this can be done in a loop but i'm not sure how to do it. This is working but takes a long time and times out by the time it reaches the last tab.
Application.Run "TotalHrs"
Columns("I:I").Select
Application.CutCopyMode = False
Selection.Insert Shift:=xlToRight
Range("I4").Select
ActiveCell.FormulaR1C1 = "Invoiced Amount"
Range("I5").Select
Columns("I:I").EntireColumn.AutoFit
Selection.FormulaArray = _
"=INDEX(VLookup!R2C2:R242C4,MATCH(RC[-3]&RC[-2],R5C6:R2500C6&R5C7:R2500C7,0),3)*R[3]C[-1]"
Selection.Copy
Range("I6:I1000").Select...................
I am trying to create a workload spread sheet for work I need to have the same looking spread sheet 365 times but also need each sheet to be dated, EG (tue,01/04/2014 through to tue,31/03/2015) I can create 365 tabs that have the same spread sheet on and I can create dates but not do both at the same time, it isn't fun doing copy and paste 365 time.
View 1 Replies View RelatedI have never written a macro and when I record one I usually have trouble with the relative references.
I am trying to write a macro to transform formulas into values every month.
I want to transform formulas:
- across a range of tabs: each tab is exactly alike and is named page-1 to page 25
- on a different column every month (same column across all tabs)
- on the same rows: L168 to L227 and L266 to L277 (same rows across all tabs)
I have 2 workbooks. The workbooks have 36 tabs for each department. Workbook 1 are current charges for the departments and workbook 2 is the revenue for each department. I would like to take the top 2 rows from workbook 2 and add them to workbook 1 at the bottom of each tab. I was able to get it to work to a specific row but the workbook 1 has variable rows for each tab.
View 3 Replies View RelatedI am trying to do is write a macro that will pull two tabs labeled "XXXXMarch" "XXXXPTD" (the x's represent numbers) from each file within a designated folder and copy them into a master file.
View 2 Replies View RelatedI work with contracts and have to report the sales for each contract by customer number, name, address, product code or sku, sales amount, quantity, and invoice date. Each contract number is associated with a product group and within that product group are a laundry list of product codes or skus.
Customers are often on different contracts for different products and may purchase some or all of the products on that contract. When I run a query from the system to extract this data, I get one sheet that contains 20,000 lines that have to then be sorted and seperated into different tabs based on the contract number. Keep in mind that a customer may be listed multiple times because each line in the query represents a product code and an invoice date.
I currently have a macro that will format the reporting such that it sorts the data, however, what it doesnt do is look for each instance of a particular contract number and separate it into different tabs.
So below are two examples: April and May 2008 Reports
April 2008 Report
Contract 1 contains 5,000 lines of data - extract into new tab
Contract 2 contains 5,000 lines of data - extract into new tab
Contract 3 contains 5,000 lines of data - extract into new tab
Contract 4 contains 5,000 lines of data - extract into new tab
Total lines = 20,000
May 2008 Report
Contract 1 contains 7,500 lines of data - extract into new tab
Contract 2 contains 5,500 lines of data - extract into new tab
Contract 3 contains 8,000 lines of data - extract into new tab
Contract 4 contains 9,000 lines of data - extract into new tab
Total lines = 30,000
So for the April Example, I would like excel to take this one list and break into 4 new tabs based on the contract number and carry over all of the data into that tab.
Where this may become difficult is that there may be more lines of data one month and fewer another. Im not sure if there is a function that will tell excel to stop when it reaches the last line for one contract number and to start a new tab for the next contract number. (see the month of May example)