I have a table with a number of columns of data.
Column A cells have a text string that has a number at the start of the line.
The table is constantly adding additional results (rows) every 5 minutes or so.
Can I dynamically identify rows via the number at the start of column A and copy all cells in that row to a different worksheet?
-Problem on all workbook tabs
-Problem persists when port of worksheet data is copied to new workbook.
-New workbook with newly typed data will allow sort.
-Can't get my existing workbook sort to work.
I have a vertical list where every other cell is coloured grey. The values contained in the list are regularly sorted into alphabetical order with new values being added and other being removed.
Is there a way to keep the cells alternate grey & white after I have sorted them? Currently, when I sort, if a cell is coloured grey and is moved down one cell the colour is moved and not just the values.
I have a report I produce where I take an XML file, sort it and run some simple formulas then sort another way and run a few more formulas then update a pivot table. The XML files I'm using have the same headers but vary in length. When I set the macro up for a particular XML file everything works fine. When I import another one (different size) I get the error message:
Run-time error ‘1004’:
Sort method of Range class failed
When I look at the code I see that the range is fixed to the XML file I used when setting the macro up. Is there a way to auto-select the table in the macro so I can run the same macro on any size XML?
I have data in table which look like this
A
B
1
NAME
AV
2
SONA
18
[Code] .........
I Want a formula that will enable excel to give me the number of students with Av.
>= 18
>= 15 but not > than 18
>= 10 but not > 15
In the RANK() function I can rank a value depending on one set of values (one condition), but when you SORT data you can choose a second (and a third) condition.
Is there a way to RANK with two sets of values (two conditions)?
I have a string that I need to sort.
Below code works beautifully but doesn't sort numbers, any advice to get this to sort numbers as well?
Function Alphabetize(ByVal sText As String) As String
Dim sWords() As String, sTemp As String
Dim i As Long, j As Long, n As Long
'-- clean up text
For i = 1 To Len(sText)
Select Case Mid$(sText, i, 1)
Case " ", "a" To "z", "A" To "Z"
Case Else: Mid$(sText, i, 1) = " "
End Select
Next
'-- remove leading and trailing spaces....................
How can I sort two columns of function results using the result value? Excel is trying to sort on the function in the cells rather than the results themselves.
View 9 Replies View RelatedI have 3 columns of data: col. A = name (random order), col. B = Net #, Col. C = Gross #.
I am using =LARGE(C$1:C$4466,ROWS($D$1:D1) to Automatically sort col C in decending order.
I would Like to do another decending sort but only the values in Col C that corespond to a particular name in Col A. Can I imbed a index match function combination within the large function to do this?
Name
Net
Gross
All Sort
SortA
SortB
SortC
SortD
A
508
-200.129
101.685
[Code] ..........
I am working on a simple employee list with names, phone numbers, employee ID numbers, etc. I have created a VBA form to make new entries or change existing entries. The form has 'next', 'previous', and 'close' command buttons that work well, but I would like to have my data sort by employee name after any of the buttons are clicked.
My data is in worksheet "Employees" with employee names in column A beginning on row 2. Here is what I have entered for the 'Next' command button:
I'm currently working on a problem that I'm having with Hyperlinks. Basically I want to copy the destination data that the hyperlink points to onto another sheet.
The main problem I'm having here is that I cant seem to find a suitable method to do this....I had the idea of using the hyperlink.follow function and then copying the data once I'm there and then moving back to the source hyperlink. My only problem with that is that I dont know how to find the cell address that the hyperlink is in, once I have found that hyperlink.
Therefore my question is two-fold:
- Is there a way to copy the destination data using some sort of hyperlink function?
- If not, is there a way to find the cell address within a worksheet, once a hyperlink is found on that worksheet?
I've attached the spreadsheet below to give a better idea of what Im doing, along with the "findHyperlinks" macro,within that workbook, that I am currently working on.
I have following data to sort/filter
Sector
Flt no
origin
[Code]...
Is this possible with excel functions?
Essentially i get a Runtime 5 error on the bold bit of code....
I am trying to define a range .... by using thexlUp function find the last row ( which works ) i then pass this variable into the sort code and get the error its probably very simple to fix, all it does i sort columnA but finds the last cell .... instead of the whole column,,,,
Sub Macro7()
'
' Macro7 Macro
'
' Keyboard Shortcut: Ctrl+e
NumberOfRow = Sheets("Sheet1").Range("A3000").End(xlUp).Row
ActiveWorkbook.Worksheets("Sheet1").Sort.SortFields.Clear
ActiveWorkbook.Worksheets("Sheet1").Sort.SortFields.Add Key:=Sheets("Sheet1").Range("A2", Cells(NumberOfRow)), _
SortOn:=xlSortOnValues, Order:=xlAscending, DataOption:=xlSortNormal
[Code] .......
I need to create a custom function that can do the following without modifying the selected range. If I have data in a row, I need a function that can give me the following result:
Original unsorted data:
79
45
23
56
1
The custom formula will not modify the selected range, and after saving it or copying somewhere and sorting it, it will provide the following result: if N or count(range)=5 , and p=1, average(second and third smallest values of the range)=34; and if N=4 (lets say that we errase the number 1 data point in the range), average(third and fourth smallest values of the range)=67.5 So it is basically a sort and then getting the averages of specified row numbers depending on N or count(range) Here is what I have.
I'm missing how to create a variable with the sorted range and how to use an index to refer to the rows I want to average:
Function CSORT(r, p)
Application.Volatile
'rs or something similar that will contain the sorted range r
Dim rs As Range
'Sort rs (The following line one doesn't work, so I need one that does)
rs = Application.Range(r).Sort
Dim p As Integer
[code]....
I'm trying to do is pass the contents of a listbox to a function to sort it into alphabeticalorder. I get a error saying object required
Sub PopulateAll()
Dim lgLastRow As Long
Dim lgRowCounter As Long
Dim intCounter As Integer
Dim olb As MSForms.ListBox
For intCounter = 0 To UBound(vAllEnv)
Me.lstAll.AddItem (vAllEnv(intCounter))
Next intCounter
Set olb = frmOptions.lstAll.........................
what I do with excel: I have an excel sheet that has over 18,000 rows in it. Since it would be a nightmare to scroll around to find what I want, I use the Custom Sort and Filter options under Editing>Sort&Filter. So for example, I can omit 17,800 rows using a specific setting so that I can work with a more reasonable 200 rows. Moreover, the 200 rows comes from all over the spreadsheet. Meaning their row numbers are not always consecutive.
Here's the problem: Whenever I try to copy anything from this "edited or filtered" excel sheet, the resulting paste is not an exact copy. Excel perfectly copies the first rows up until the point where the row numbers ceases to be consecutive. So, the copy function messes up somehow when the data being copied comes from a different section of the original 18,000 rows.
In case this isn't clear enough...
Let's say that the original file has rows 1,2,3,4,5,6,7,8,9,10
Once I filter/custom sort, I see rows 1,2,3,8,9,10
When I try to copy/paste 2,3,8,9, excel copies 2,3, but messes up the rest of the 8,9. And I end up with a totally useless copy that's generally shorter than it's supposed to be.
I'm looking for a macro that can sort emails by 2 very distinct ways, with 1 special find function as well. Not too much eh? ........
View 9 Replies View RelatedI was just recently forced to create my first UDF and after how well it worked I now am very interested in learning more. I am trying to create a function to sort a range by the values in a specific column and return the range. I know this should be really simple but for some reason my code dies whenever it gets to my inner-most loop. I need to use this in a larger function but for now this is my only question. I did find that Excel 2007 has built in Functions for this but my company still uses 2003.
My
Public Function SortRange(rngToSort As Range, valCol As Integer)
Dim Swapper As Variant
Dim i As Integer, _
j As Integer, _
k As Integer
For i = 1 To rngToSort.Rows.Count
For j = 1 To rngToSort.Rows.Count - i
If rngToSort(j + 1, valCol) < rngToSort(j, valCol) Then
For k = 1 To rngToSort.Columns.Count
Swapper = rngToSort(j, k)
rngToSort(j, k) = rngToSort(j + 1, k)
rngToSort(j + 1, k) = Swapper
Next k
End If
Next j
Next i
SortRange = rngToSort
End Function
I have a list in rows where I have a ranking formula =COUNT($G$5:$G$81)-(RANK(G5,$G$5:$G$81)+ COUNTIF($G$5:G5,G5)-1)+1 When I sort the rank, ascending. All of the unique numbers sort ascending, but the non-unique numbers sort descending
ex) 1.751
2.52
3.753
418
417
416
Using DataEntry sheet for data.
Trying to rearrange the data to DataFormatedProperly sheet.
So far all I can accomplish is DataFormatedWrong sheet.
Edit: Not sure what happened but file was NOT understandable before. It should be correct now.
Is it possible to make excel sort ascending or descending but from mid way through alphabet and then loop through the alphabet again. for example. If Cell A1 had "A" in, it would sort as normal.
Cell A1 = A
Cell A2 = B
Cell A3 = C
Cell A4 = D
Cell A5 = E
If Cell A1 had "C" in, it would sort from "C" through the alphabet and then loop to the start of the alphabet as shown below.
Cell A1 = C
Cell A2 = D
Cell A3 = E
Cell A4 = A
Cell A5 = B
As of right now these are the steps i do to sort...i click custom sort choose My data has headers and then i select from the drop down list the word FRNAME.
is there any way i can setup a macro to do this for me? i tried recording the macro but it just is recording me choosing the column FRNAME is in. This does not work for me since FRNAME end up being in different columns all the time but will always be in row 1.
I would like to ask if it is possible to sort a range of row? What I mean is, if I sort like Row 1, the entire block of row 1 will move as well? Like if i have column A to F, then row 1 of column A to F will move together at the same time.
View 3 Replies View RelatedI am looking for a macro to sort my colums in ascending order the range i need sorted is from A7:F107, it will be sorted with the numbers in the A column ie 1 - 107. sometimes different numbers get added and it has to be sorted in number sequence.
If possible i would also like a macro to protect this range after the sort,
I have an Overview sheet within my workbook that contains info from all other sheets.
What I want to do is when you click on the Sort button in the General sheet it will activate the Overview Sheet and
- first off sort all sheets starting with AJ together, then all sheets starting with CJ together and then all sheets starting with PJ
- then the next thing i want it to do is sort all Ajs by their start dates, sort all CJs by their start dates and the same for all PJs.
Now up until now I was keeping all sheets that began with AJs together in the workbook and so on so I was able to use the following sort function
Sub Overview_sorting() ...
I am trying to sort a long range of text that is placed horizontally in a spreadsheet. I can do it vertically with the sort function in Excel but it does not seem to work for text that is placed horizontally. Example is as below:
Inventory Accounts Human Resources
I have this massive spreadsheet, with the maximum rows excel will fit on one sheet. In the interest of simplicity, this is what the raw data looks like:
Last First Amount
Jones Jim $1000
Jung Joe $700
White Jon $100
Jones Jim $200
Jones Jan $300
Jung Joe $800
White Jon $200
What I want to do is automatically get excel to group all the same names together. Then I want it to sum all the values for each name, then order by largest total value for each person, then order that by name alphabetically. In other words, the above would look like this after the sort:
Last First Amount
Jung Joe $800
Jung Joe $700
Jones Jim $1000
Jones Jim $200
Jones Jan $300
White Jon $200
White Jon $100
Or, if necessary, there could be sum total rows under each name...although I don't have spare rows, so IDK. I could delete some rows if I had to, but would rather not.
I've located the following color sort VBA that sorts worksheets by color and it is working well. I'm trying to modify the code to sort each of the "color grouped" sheets alphabetically. That is, sort by color and then each color group sorted alphabetically.
VB:
Sub SortWorksheetsByColor(Optional ByVal SortByAsc As Boolean = True)
Dim i As Long
Dim j As Long
Dim ShtC() As Long
Dim ShtN() As String
Dim t, n As Long
Dim lngSU As Long
[Code] .....
I havet he following code which sorts data. If there is no data to sort I keep on getting a run time error. Could I add something to my code to prevent the run-time error, as sometime there won't be any data to sort. The code runs when I switch to the worksheet in question.
Sub SortMeetings()
Dim iCTR As Integer
Dim yCTR As Integer
Dim zCTR As Integer
zCTR = 11
For iCTR = 12 To 23
For yCTR = 1 To 10
If Len(Range("D" & iCTR).Offset(0, yCTR)) 0 Then
Range("AA" & zCTR).Value = Format(Range("D" & iCTR).Offset(0, yCTR), "HH:MM") & " " & Range("D" & iCTR).Value
zCTR = zCTR + 1
End If
Next yCTR
Next iCTR
Range("AA11:AA" & zCTR).Select
Selection.Sort Key1:=Range("AA11"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
End Sub
I would like to sort columns B and C (keeping the two lined up together) so that A and B match up numerically.
View 3 Replies View Related
