Finding last empty cell on a column and inserting, copy paste the last non empty column. Now, I do have same problem again but this time I have to copy the last 3 non empty columns and paste it on 3 inserted column. Here is the piece of successful code with my previous problem.
[Code] .....
Hello All:
I have the following type information in thousands of cells. I need too isolate the Width and Length from these cells. The width and the length are the two numbers on each side of the "X".
RAPITONE C2 10 X 10 100
RAPITONE M2 10 X 10 250
RAPITONE M2 10 X 10 250
RAPITONE M2 10 X 10 250
RAPITONE M2 10 X 10 250
RAPITONE M2 10 X 10 250
RAPITONE M2 10 X 10 250
RAPITONE M2 76 EI 42 X 100 ROLL
I needed to match the width a merged area of seven columns to a single column width (for row autofitting). Adding the column unit values and setting the single column to that value produced a significantly narrower width.
The documentation mentions that the column width unit is scaled to the font type and size and the absolute width is given in points.
This is set by the normal style setting in Excel Options or by VBA application.standardfontsize = 8 (in this case).
For instance, ten columns of Arial font 8 at 8.5 units you would think to be equivalent to a single column of 85 units.
In points, the difference is 420 vs. 386.25, or 33.75 points.
Well, the standard character zero has a width at this setting of 4.5 points and 1 unit is 8.25 points, leaving 3.75 points for margins.
Then (10-1) margins allowances time 3.75 points resolves the difference.
Determining the margin allowances is straightforward, and reveals that the gradation with size is stepped by MS design.
For instance, sizes up to 11 use 3.75 points for margins and increasing points for characters (except between 9 & 10).
Sizes 12 through 18 use 5.25 points, 20 & 22 use 6.75, 24 & 26 use 8.25, etc.
I have created a table for this purpose, however I rarely use a "normal" other than 8, so I can probably use that set in programming.
I need to use macro to find the last column index number within the print area. My cell sizes change depending on the data entered so the last column in the print area changes. The code I want to implement involves putting a title at the top of the page and creating a border that spans the width of the page. This is what I have so far:
LastColumn = Cells.SpecialCells(xlLastCell).Column ' replace this with last column in print area
Rows("2:2").Select
Selection.Insert Shift:=xlDown
Range(Cells(1, 1), Cells(2, LastColumn)).Select
With Selection
.MergeCells = True
.HorizontalAlignment = xlCenter
.VerticalAlignment = xlCenter
End With
With Selection.Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.Weight = xlMedium
.ColorIndex = xlAutomatic
End With
How can I print 2 selected area (highlighted area). I know there is a trick to do that. Right now I can only select (highlight) one area to print, but would like to know how to print 2 or more areas at same time
View 7 Replies View RelatedI have an excel sheet that I am importing to my network software. One of the columns lists telephone numbers, but they are as follows: aaa-bbbb
I need a way to enter an area code (the same area code) for all of the numbers in the column without manually entering them (the program I am importing this list to will not work without 9-digit telephone numbers).
[URL]
"Is there a way to insert a column in a workbook that doesnt run all the way through the page?" Is a page break a potential fix?
Suddenly a file in heavy use for a number of weeks is including an unselected column some 40 columns away in the print area.
View 2 Replies View RelatedI have a template worksheet that several people use and print from.
The range on this worksheet used is A1:C499
I want the VBA to look at tha last cell that is populated in column A and set the print area to suit.
i.e. the last cell used in column A could be A277. then I'd want the print area to be A1:C277.
I want to select a range in a spreadsheet and then set it as the print area. the last column I want to be selected is contains the text data "ABC" in row 1 and is the only column with data "ABC" in row 1. The last row I want to select contains the text data "DEF" in column 1 and is the only row in column 1 containing the data "DEF". Basically I want to select the range [A1:column("ABC")row("DEF")] and then set it as the print area.
View 2 Replies View RelatedI have a Name column where I want to isolate the beginning digits. Here are some examples:
23-21345-text123text-date
1-34513-abcdefg1-feb13-feb13
100-13532-textabcd-mar13-mar13
I want to create a new column that only contains the numbers at the beginning. So using the above examples, I would only want:
23-21345
1-34513
100-13532
Before the dash, it is always between 1 to 3 digits long. After the dash, it's always a 5 digit code.
I have a list of data in which it will ALWAYS have the following set up:
S-CustomerName-####
"S-" and "-####" will always remain the same - however, the customer name may be 2 digits or 20 digits - or anything inbetween.
I'm looking for a formula that will allow me to isolate the Customer name
I've attached a sample list of my data.
I need the data "pulled down" into the subtotal row, so to get this after I subtotal, I'm sorting by C, and I've got some VBA deleting all rows where COLs A & B are blank (this is the longest part & the part I want changed the most - this gets rid of the non-subtotaled rows), extended replacing "Total" with "" in COL C and then inserting a lookup in A & B to get the data back next to the subtotals.
This takes really long and I'm sure there's a faster way to do this that I haven't thought of. All in all, I'm looking for something that will ONLY keep the subtotal rows, and will fill down the data to them while removing any non-subtotal rows.
How do I isolate "FOCUS" in the following string
FORD FOCUS TOYOTA CORROLA
Using Excel 2003 I am trying to write a macro to set the print area according to the amount of data in a particular range of cells. I find I can include this instruction
View 2 Replies View RelatedCurrently in Column B for all the rows I have a basic math formula which adds the last three entries for that row and divides them by 3. Currently, I constantly am needing to readjust the formula to include the correct columns for each row every time a new column entry is added. I am looking to set it up so it automatically sets the formula to read the last 3 entries without having to manually adjust the formula to D+E+F= to E+F+G= ect... when a new entry is added.
View 1 Replies View RelatedI am a relatively light Excel user. I mainly use it when working with the .dbf files that make-up GIS shapefiles.
My problem at hand: How can I compare/isolate the rows from spreadsheet #1 to #2 to determine which rows are unique to spreadsheet #1?
What I'm doing: I have a spreadsheet of addresses which I joined to our parcels shapefile to select those parcels. I am trying to determine the success rate of my join operation by isolating the rows which weren't joined. This would be determined by highlighting which rows from spreadsheet #1 aren't in #2.
How can I set up my sheets so that the background and grid are isolated, in other words only the background, the grid, and my data shows on the sheet, the rest will be blacked out. I need to email only the certain area of the worksheets.
View 3 Replies View RelatedI have a worksheet that tracks errors (10 different error types are tracked) that may occur on anywhere from 20 to 200 different jobs. What I need to be able to do is find all the jobs for any given day where a specific error has occurred two or more times for that day. Often a specific error will occured many times on the same job on the same day. What I need to end up with is only one row for each job that shows the Date/Time (m/d/yyy h:nn), JobNumber (number), ErrorNumber (text field) by either hiding or deleting those rows that do not meet the criteria.
View 8 Replies View RelatedHaving a strange issue running an autofilter on a set of data - trying to isolate a particular date...
I have four variables :
wsDataSheet (Worksheet) specifies the sheet containing the datargAllRange (Range) specifies the range of data to be filteredinValueDateColumn (Integer) specifies the column in which the dates are held (entire column is Date formatted)dtDate (Date) is a date value specified by the user on the main sheetFor test purposes, I've filled the column with the same date (19/07/2011) and specified the same date on the main sheet (19/07/2011) - and checked that all variables are holding their expected values in the debugger.
But for some reason, when I run the code...
Code:
With wsDataSheet
.AutoFilterMode = False
.Range(rgAllRange.Address).AutoFilter Field:=inValueDateColumn, Criteria1:=dtDate
End With
The autofilter finds no matches??
Very puzzled as I've gone to great lengths to ensure the date formats are consistent.
(scroll down for example) I have 142 countries and 6 numbers beside each country starting from Column A, Cell 2 (A2) . I want to seperate the numbers into columns B,C,D,E,F,G
The formula I thought to usein B2 was =Right(A2,11) to give me the 3 next to Afghanistan in the ELICOS Column (B2) , but this gives me all the numbers
Question is How do I seperate each number so each one sits in the right column??
ELICOS
Schools
VET
Higher Education
Postgraduate Research
Non Award
AusAID/Defence
[Code]....
In A1 I have the following text: Distance: 457 meters
I want a formula N1 that isolates the numbers so it shows 457 only
I have a cell in F2 that looks like this...
513 BLUE RIDGE
Kansas City, MO
(39.104810141000485, -94.47983043799968)
I need to isolate the coordinates in separate cells. IE "39.10481014000485" in cell J2 & "-94.47983043999968" in cell K2. The problem is that some of the cells don't have 14 numbers behind the decimal, and my formula will sometimes grab either the comma ( "," ) or the end parenthesis ( ")" ). Is there a formula I can use to isolate the two coordinate plots?
The good thing is every cell is formatted exactly like this. I had been using a formula that looks like this.
=MID(F2,FIND("(",F2)+1,18)
I think it's close. I just cant figure out how to tell the formula to stop at the first comma, and to stop at the end parenthesis for the second set of coordinates.
The problem I have is I have a cell that says "170.51CR" and I want to extract the number (to perform an operation) without changing the cell.
The reason why is that data is from a website which updates so I can't adjust it.
Eg if I have "170.51CR" in cell B3 and I want to times the number by another cell When I times that value it return an error so I just want to operate the function on the 170.51
In column A, one cell contains "USLH : N NAD: # of Claims: 112".
In B1 I have this formula:
=RIGHT(INDEX(Data!$A$1:$A$32,MATCH("*# of Claims:*",Data!$A$1:$A$32,0)))
The result is "2". How can I fix it so that it returns all three digits, rather than just the last digit?
The number at the end of the range will change from 0 to 999.
I have a long lists of values (product numbers) from our inventory records. Now, we've been given a new list of product numbers, some are the same and some are not.
I want to isolate (spit out) the values from column A, than don't match column B. Column B is the list we SHOULD be using, column A is what we're currently using. See example below.
Old Products New Products
34544 34544
34545 34546
34546 34547
34547 34548
34548 34550
34549 34551
i am trying to isolate everthing after the last dash, now i did the same with the first dash using left, i tried to do the same using Right to get "155", but it gives me incorrect result,
Sheet1 ABC887878-1554-155 87878987878-1554-155 554-155Spreadsheet FormulasCellFormulaC8=LEFT(A8,FIND("-",A8)-1)C9=RIGHT(A9,FIND("-",A9)+1) Excel tables to the web >> Excel Jeanie HTML 4
I am trying to graph the following data in an area chart with line charts superimposed on the area chart. I have a lot of data (and a lot going on) so I'm trying to figure out the best way to show this in excel from a functional standpoing (i can't get this to work in excel!!) to also an asthetic standpoint (dont want it to look terrible or illegible). This is what I'm trying to chart:
1) Weather data (temperature) by region:
So one region, would be: Northwest
I would like the "area" (so a shaded region) to be the min/max of the temperature data for each month.
2) I would like to show the temperature for each year as a line graph on the chart - so you can see if a year falls in or out of the shaded region.
3) I would like to show a company's sales increases across the same months per year as separate line charts. I may choose to just show the biggest outlier year in the end... or to show 2006 (the latest data).
What I am trying to convery with the chart is that the company's sales is or is not tied to weather deviations. I have attached an excel file with the data. I haven't been able to use the area chart or get a two axis chart to work or get it to look even remotely professional.
Is it possible on Excel to make a drop down menu which picks records out of a list?
I've a big spreadsheet. Thousands of records. Each record has one of 100 people listed as responsible for it. I've highlighted stuff for them to fix, I'll be emailing it out to them, and they'll need to isolate the dozens of records they are each responsible for from the thousands of other ones.
They are, erm, technologically challenged. I want to keep it simple, put one menu on the screen and say
'Pick your name from the list.'
George W picks himself from the list, and then it lists his records only and not anybody else's.
Can Excel do that? (Rather, probably, but where do I start?)
I have the following spreadsheet:
A----------- B----------------- C
Invoice------ Product Code------Classification
82001733----LX+150SVL0044----9010.90.9000
-------------SE+68763001-------8501.31.4000
-------------GJ+10005-----------
-------------SE+59163-----------8504.40.9580
-------------EB+98575-----------
-------------KF+MX09300--------9010.90.9000
I'd like to extract the rows with blank cells in Column C and product codes in Column B and create a list of product codes which don't have classifications on a separate list.
This new list would need the ability to be revised as other codes will be added once a macro is run.
