I am using this vba to delete if the "field" is found, but how can I do that it will delete only if the "field" is not found?
If NO DATA found, the sheet will be delete.
I want as if "NO DATA" found, do not delete. If "NO DATA" not found, then delete..
I'm very new to excel. I need a formula to put in a column (I) that returns ONLY a five-digit zip code from the adjacent cell in column J, which is a full address. Nearly every entry is written differently, and many do not contain a zip code. I would like the cell to be blank if the cell in J contains no zip code .
I'm using the formula:
=MID(J5,MATCH(TRUE,ISNUMBER(-MID(SUBSTITUTE(J5,"","#"),ROW(INDIRECT("1:"&LEN(J5)-4)),5)),0),5)
This formula sometimes returns -**** format numbers, considering them to be negative and still five-digit. It also returns #N/A if no zip code is present, and I would like this to be blank. I'm sure I can nest the formula within an IFF, but have not been able to make it work myself.
I am currently using this macro for deleting a row if a string is found:
[Code] .....
But I would like to be able to not delete that row, but also to delete the 13 row above that row, including that row too.
ROW 1
ROW 2
ROW 3
ROW 4
ROW 5
ROW 6
ROW 7
ROW 8
ROW 9
ROW 10
ROW 11
ROW 12
ROW 13
ROW 14 - NO MONEY
All this from No Money up to Row 1 will be delete, and loop.
Is there a scripting way to delete a sheet name if found ?
Is there a scripting way to create a sheet name based on a cell syntax ?
Is there a scripting way to find text in a sheet based on a cell syntax from another sheet ?
I have two buttons with macros attached. One button inserts a new wave line and everytime a wave is inserted, the number of that wave follows on. I have another button which inserts a new store line. There can be multiple stores per wave. What I want now is another button which when clicked would bring up a listbox of all the waves so that I could select a wave to delete. Once I deleted a wave I want the waves which are left to re number themselves so that they aren't out of order. This would have to also delete each store which was underneath that particular wave.
View 8 Replies View Relatedi want to delete the column which are blank
e.g
i have data in Column A1:N1 then delete the column O:Z
I have a userform that allows a user to enter data from columns A to P. I successfully installed a macro (which I got from this site:[url]
that deny a duplicate entry in Column A. The macro then "clears" the duplicate value in column A, which is okey. However, I need help for a code so that the
rest of the entries from Column B to P (within the same row) will also be cleared automatically. I tweaked the "target.value" quite unsuccessfully.
I want to delete if my sheet have a value miles away
Sample
A1=0 miles away
a5=25 miles away
a30=50 miles away
how i delete these
a1=""
a5=""
a30=""
"' means null
I have been trying to create a macro vba that will look at a specific row in the current sheet and if it sees a name I need to delete that row. But I am looking to also under stand what it is doing so I can use this script in other instances. I just bought some things off MrExcel's Store but i won't get this for a few days.
View 9 Replies View RelatedI need a VBA code that will search column H for any value that DOES NOT start with "9" (this is a character field). If it finds a cell that doesn't start with "9", I would like it to delete the entire row. It will need to repeat this process for every cell in Column H that has a value and then stop.
View 7 Replies View Relatederror in my code, its the final part of the jigsaw for me to complete my project.
I am trying to find a variable that the user types in my spreadsheet and delete columns from several worksheets. I'm really close but keep getting the above error.
Here is the code.
Sub DeleteEmp()
Dim RemoveEmp As String
''' CURRENTLY DOES NOT WORK FOR SOME UNKNOWN STUPID REASON
MsgBox "Warning. This process will result in the permanent removal of an employees datails"
FinalWarning = MsgBox("Should I continue?", vbYesNo Or vbDefaultButton2, "Confirmation")
If FinalWarning = vbNo Then
I have a list of email addresses in column A of a sheet1, and a list of "Do Not Send" email addresses in column A of sheet2. I'd like to have a macro that would delete any cells in column A sheet1 that were listed anywhere in column A of sheet2.
View 5 Replies View RelatedYou can find attached the workbook I am working on.
In my workbook I have four sheets. Only two sheets are relevant in this case: "Sheet1" and "List". On "Sheet1" there in column A there is big range of codenumbers (highlighted with red).
On the "List" worksheet I have a smaller list (highlighted with green).
I have a code also in module1 but the code is not working.
I would like my macro to do the following. Check the code number from the "List" worksheet (green) and search for it in "Sheet1" column A (red). If this codnumber can be found in column A then leave the number on the green list. If it cannot be found in column A then, delete it from the green list. If you open the file, you can see on the "List" worksheet that there are three code numbers in the green range. The upper and the bottom code number can be found on the "Sheet1" column A (red) range, but the middle number cannot be found. So if the macro would work correctly then it would delete the middle number, and leave the other two untouched!
Is there a macro that will begin in cell A2 and delete rows until the contents “Total” is found in a random row in Column A?
View 4 Replies View RelatedI'm diving back into VBA after a year out of the mix.
I need a code to delete all rows with a 0 in Column F below Row 4.
I have two workbooks, one is used for importing items to the site while the other is a monthly product list. In each of these I have a list of sku codes. I need a macro that will search each sku from the import to the entire product workbook. If it's found then delete the whole row from the product workbook. I have attached the examples below.
View 6 Replies View RelatedI need a formula or VBA macro to do the following:
I have 2 worksheets, namely sheet 1 and sheet 2.
Sheet 1 contains data in columns A to H.
Sheet 2 contains data only in column A.
I want Excel to check the data found in column A of Sheet 2 with those in Column A of Sheet 1. Hence, when an exact match is found in Column A of Sheet 1, Excel will delete that entire row.
I'm using this code to find values of "FEP MHS" or "LSD MHS" in column S and if column S containes either of these values it deletes the entire row from the spreadsheet. I need this to work on a spreadsheet that runs on a daily basis and each day it contains a different number of rows. I have used this code to successfully delete most rows that contain these values in Column S but for some reason it does not delete all the rows, typically leaving 6 - 7 rows that contain these values. I'm using Excel 2007 I need code that finds the last row used and deletes the entire row if these values are present.
Dim CelRSLHMHSD As Range, RngRSLHMHSD As Range, iRSLHMHSD As Long
Set RngRSLHMHSD = Columns("S").SpecialCells(xlConstants, xlTextValues)
For iRSLHMHSD = RngRSLHMHSD.Count To 1 Step -1
If RngRSLHMHSD(iRSLHMHSD).Value = "FEP MHS" _
Or RngRSLHMHSD(iRSLHMHSD).Value = "LSD MHS" _
Then RngRSLHMHSD(iRSLHMHSD).EntireRow.Delete
Next iRSLHMHSD
I've attached a dummy worksheet that shows constant values of 1.00 in columns D and E. In the actual workbook, user action will sometimes cause these values to change to something other that 1.00. The user may wish to delete the action that caused the change.
I need a macro that will search from the last cell in column D upward to the first instance of a cell that is not equal to 1.00 and select that cell and those immediately above with the same value as the first found cell.
For example, in the attached worksheet the search would start in the last cell of Columd D and search upward. It would find cell D23 and upward to D19. These entire rows would be deleted.
I have a excel 2007 workbook that has 5 sheets "MASTER" , "RED" , "WHITE", "GOLD" & "BLUE". There are 7 columns in each sheet and the master has about 8,000 rows . In column D of each sheet there is a unique number (approx. 8 - 10 digits ) that I would like to at the press of a command button search through sheets "RED" "WHITE" "GOLD" & "BLUE" against the unique numbers in the "MASTER" sheet and if there any duplicates numbers delete the entire row but leave all the data in the master sheet.
View 2 Replies View RelatedI am trying to write a macro where it will delete rows in Sheet A if any condition is found in the row which is based of conditions in Sheet B.
Sheet A :
Column A Column B Column C Column D
1234 ABC tyu 4588
asd qwe www 4455
zxc zdaa 1234 4441
ghj llll 1111 poo0
Sheet B (where i kept my conditions in Column A: )
Column A
1234
1111
(and many more....)
the end results will be the Row 1 and row 4 will be deleted. I have tried to google but most only contains deleting rows with a specific conditions.
I was wondering if it is possible at all to hide or delete the default page field option to select "(All)" in a pivot table, and to just have the pivot default to the first list member in that page field.
View 3 Replies View RelatedIn the following extract, I would like to have today's date placed into Col K when an entry is made into Col J.
Entry into Col J is from a validation list of 3 options. What I desire is that when one of these options is selected ("Complete"), then I would like today's date to be written into Col K.
Currently Col K has a validation list which comprises dates from 1st of each month from July to June.
I need a fixed date as text preferably, so was thinking the VBA function "Date" on a Change Workbook Sub.
The information is currently part of a Table in Excel 2007 that has about 500 records.
IdeasList
*
J
K
2
Status
Month Completed
3
In Progress
*
4
Complete
Jul-13
5
*
*
6
*
*
Data Validation in Spreadsheet
Cell
Allow
Datas
Input 1
Input 2
J4
List
*
=ValidationList_Status
*
K4
List
*
=ValidationList_Months
*
I have a macro that imports a report. If the Charge Type in column A is BTOREPLX, I need to prefill the field next to it in column B with the text "REPLX", e.g. "REPLXCDROM". I've attached an example of the report.
View 5 Replies View RelatedIn building my pivot table my data that I want to show in the column area is showing up as rows stacked on top of each other. In the column section I'm trying to show Total Budgeted Amount next to Total Actual Amount but on the layout it's showing the two stacked on top of each other is there some kind of hidden key that I'm missing?
View 3 Replies View RelatedI have a simple formula ='info page'!b2&'info page'!b5 in places that on my sheet adds a company prefix to a item number, prefix in b2 and item in b5, we have a client that we cant use prefixes but now when I leave the field blank its giving a zero and thats not good either. I'm pretty sure an IFERROR or something will work but can get the syntax right.
View 5 Replies View RelatedI have a tab called 'Tab1' in which I have column called 'Col1' and 'Col2'.
I have another tab called 'Tab 2' with columns 'ColA' and 'ColB'. When I enter a text in Col1(Tab1) I would like that text to be compared to data in 'ColA' from Tab 2 and when match found then get the corresponding value from ColB and autopopulate it in Col2 of Tab1.
in coverting these fields into a date field.
Example 91306 to 060913
I have encloed the file.
I am trying to count the number of times that data is in a field and in any field the date is greaert than today's date. This date field could be blank and that is where I am having the problem.
Example
See Attached
I want to concatenate two Cells into a single cell BUT have the first field left justified and the second cell right adjusted.
A1 = "John Williams", A2= "Single"
A3 = "John Williams Single"