I have two buttons with macros attached. One button inserts a new wave line and everytime a wave is inserted, the number of that wave follows on. I have another button which inserts a new store line. There can be multiple stores per wave. What I want now is another button which when clicked would bring up a listbox of all the waves so that I could select a wave to delete. Once I deleted a wave I want the waves which are left to re number themselves so that they aren't out of order. This would have to also delete each store which was underneath that particular wave.
I have a userform where I can select multiple items in a listbox and add them to another. I also have the ability to filter the first listbox to make finding items easier. The issue I am having concerns the clear filter button. As currently designed, the clear filter button will reset the initial listbox back to its default values. Ideally, I would like it to reset to the default values excluding those values that currently in the second listbox.
The entire code is below for reference, but it's the sub ClearFilter_Click that I am struggling with.
What I am trying to do is for example Sheet 1 has a range of names A1:A20 and on sheet 2 on non contigious ranges some values from the range on Sheet 1 shown here and there. What I would like is on a form ListBox1 shows all names used in Sheet2 and on ListBox2 all names that were not used.
Below is the code to look in a specified sheet and find the values in the row where the combobox value is found. These values that populate into the Listbox when a Combobox value has been selected, are in the same row as the Combobox value, but offset 20 - 29 columns.
All is good in this section of code.
The Listbox has 3 coulumns. It is populated as follows: 1st column is the header in Row 1 of the the columns 2nd column is the actual numerical values(minus another value offset 80 columns) in the combobox specified row, and 3rd column is the actual numerical value address in the combobox row.
Code: Private Sub ComboBox1_Click() Application.ScreenUpdating = False If Me.ComboBox1.Value <> "" Then Me.ListBox1.Clear ' On Error Resume Next
[Code] .......
The next code runs thwn the user double clicks a Listbox value. It basically enters the Combobox value and Listbox value to a sheet. All is good here, with the exception to placing the Listbox item address to the specified sheet cell.
For some reason i ALWAYS obtain the LAST possible address of the range of values (i = 20 - 29), instead of the actual item selected in the listbox.
Code: Private Sub ListBox1_DblClick(ByVal Cancel As MSForms.ReturnBoolean) With Sheets("DESPATCH") .Activate ActiveCell.Value = Me.ComboBox1.Value
[Code] .......
How to rectify this to obtain the correct listbox address ?
I have a spreadsheet containing a list of key fob numbers, key numbers, etc. I have 3 userforms with different for different options, i.e. Key fob no. search, key number search, room number search. I have set up the code for each of the userforms to search for the information entered in the textbox and then lists the info in the listbox which I can then click on the one of the listed items to take me directly to the place in the spreadsheet.
However since there are a range of different key numbers per key fob, I would like to know what code I can use to allow a range of information such as the key number and room number, etc to be displayed in the same listbox as the Key fob number i searched for.
Here is my code for one of the Userforms:
Option Explicit
Sub Locate(Name As String, Data As Range)
Dim rngFind As Range Dim strFirstFind As String
With Sheet1.UsedRange Set rngFind = .Find(Name, LookIn:=xlValues, lookat:=xlPart) If Not rngFind Is Nothing Then strFirstFind = rngFind.Address Do
I cannot attach a example of my form since the site seems to have a limit on the size of the upload and my part of the file compressed in zip format is still at 168kb.
I have a userform that allows a user to enter data from columns A to P. I successfully installed a macro (which I got from this site:[url]
that deny a duplicate entry in Column A. The macro then "clears" the duplicate value in column A, which is okey. However, I need help for a code so that the rest of the entries from Column B to P (within the same row) will also be cleared automatically. I tweaked the "target.value" quite unsuccessfully.
I have been trying to create a macro vba that will look at a specific row in the current sheet and if it sees a name I need to delete that row. But I am looking to also under stand what it is doing so I can use this script in other instances. I just bought some things off MrExcel's Store but i won't get this for a few days.
I need a VBA code that will search column H for any value that DOES NOT start with "9" (this is a character field). If it finds a cell that doesn't start with "9", I would like it to delete the entire row. It will need to repeat this process for every cell in Column H that has a value and then stop.
error in my code, its the final part of the jigsaw for me to complete my project.
I am trying to find a variable that the user types in my spreadsheet and delete columns from several worksheets. I'm really close but keep getting the above error.
Here is the code.
Sub DeleteEmp()
Dim RemoveEmp As String
''' CURRENTLY DOES NOT WORK FOR SOME UNKNOWN STUPID REASON
MsgBox "Warning. This process will result in the permanent removal of an employees datails"
FinalWarning = MsgBox("Should I continue?", vbYesNo Or vbDefaultButton2, "Confirmation")
I have a list of email addresses in column A of a sheet1, and a list of "Do Not Send" email addresses in column A of sheet2. I'd like to have a macro that would delete any cells in column A sheet1 that were listed anywhere in column A of sheet2.
You can find attached the workbook I am working on.
In my workbook I have four sheets. Only two sheets are relevant in this case: "Sheet1" and "List". On "Sheet1" there in column A there is big range of codenumbers (highlighted with red). On the "List" worksheet I have a smaller list (highlighted with green).
I have a code also in module1 but the code is not working.
I would like my macro to do the following. Check the code number from the "List" worksheet (green) and search for it in "Sheet1" column A (red). If this codnumber can be found in column A then leave the number on the green list. If it cannot be found in column A then, delete it from the green list. If you open the file, you can see on the "List" worksheet that there are three code numbers in the green range. The upper and the bottom code number can be found on the "Sheet1" column A (red) range, but the middle number cannot be found. So if the macro would work correctly then it would delete the middle number, and leave the other two untouched!
I have two workbooks, one is used for importing items to the site while the other is a monthly product list. In each of these I have a list of sku codes. I need a macro that will search each sku from the import to the entire product workbook. If it's found then delete the whole row from the product workbook. I have attached the examples below.
I need a formula or VBA macro to do the following:
I have 2 worksheets, namely sheet 1 and sheet 2. Sheet 1 contains data in columns A to H. Sheet 2 contains data only in column A.
I want Excel to check the data found in column A of Sheet 2 with those in Column A of Sheet 1. Hence, when an exact match is found in Column A of Sheet 1, Excel will delete that entire row.
I'm using this code to find values of "FEP MHS" or "LSD MHS" in column S and if column S containes either of these values it deletes the entire row from the spreadsheet. I need this to work on a spreadsheet that runs on a daily basis and each day it contains a different number of rows. I have used this code to successfully delete most rows that contain these values in Column S but for some reason it does not delete all the rows, typically leaving 6 - 7 rows that contain these values. I'm using Excel 2007 I need code that finds the last row used and deletes the entire row if these values are present.
Dim CelRSLHMHSD As Range, RngRSLHMHSD As Range, iRSLHMHSD As Long Set RngRSLHMHSD = Columns("S").SpecialCells(xlConstants, xlTextValues) For iRSLHMHSD = RngRSLHMHSD.Count To 1 Step -1 If RngRSLHMHSD(iRSLHMHSD).Value = "FEP MHS" _ Or RngRSLHMHSD(iRSLHMHSD).Value = "LSD MHS" _ Then RngRSLHMHSD(iRSLHMHSD).EntireRow.Delete Next iRSLHMHSD
I've attached a dummy worksheet that shows constant values of 1.00 in columns D and E. In the actual workbook, user action will sometimes cause these values to change to something other that 1.00. The user may wish to delete the action that caused the change.
I need a macro that will search from the last cell in column D upward to the first instance of a cell that is not equal to 1.00 and select that cell and those immediately above with the same value as the first found cell.
For example, in the attached worksheet the search would start in the last cell of Columd D and search upward. It would find cell D23 and upward to D19. These entire rows would be deleted.
I have a excel 2007 workbook that has 5 sheets "MASTER" , "RED" , "WHITE", "GOLD" & "BLUE". There are 7 columns in each sheet and the master has about 8,000 rows . In column D of each sheet there is a unique number (approx. 8 - 10 digits ) that I would like to at the press of a command button search through sheets "RED" "WHITE" "GOLD" & "BLUE" against the unique numbers in the "MASTER" sheet and if there any duplicates numbers delete the entire row but leave all the data in the master sheet.
I have a listbox which brings up my bets for todays horseracing. If say one of my selections is a non-runner, would I be able to add a command button to delete that selection from the source data.
The source range is "AL10:AN24". So all I would want to do is select the selection if it isn't running and click on the command button to delete the selection.
I already have code to sort the source data and would like to add this code to the new code, so once a selection has been deleted the source is also resorted.
Here is that code, in case it is needed:
Private Sub CommandButton1_Click() Range("SYSTEMS!AL10:AN24").Sort Key1:=Range("SYSTEMS!AL27:AO41"), Order1:=xlAscending End Sub
I have a listbox in my user form and it has a Rowsource of A1:A225, I need to be able to select a value in the list box and hit Command_Button4 to delete it.
Private Sub CommandButton4_Click() DeleteName End Sub
Sub DeleteName() ListBox1.Value.Select Selection.ClearContents End Sub
Also, is there anyway to ignore blank cells in the listbox?
My userform has an update button that displays a listbox in a userform. The user selects from the list, chooses to update and another userform appears to request some additional information before saving it to a different sheet. This works fine, but how do I then delete the row containing the original item on the original sheet selected from the listbox at the same time?
I have a list box that shows a range of cells (called emailrange). I want to add a Delete button that enables a selected value in the Listbox to be deleted if necessary (just the cell value not the row).
I have two listboxes where I can move tickers from left to right. This is synced with a sheet, such that the tickers also are pasted there too.
But if I use the remove button, I can remove tickers from the listbox, but I cannet delete them from the sheet. If I understand right the listbox only refer to what row the selected is, not what the text is...
And then its a bit tricky. I have tried a code where it just add the list one more time, after the itmes has been removed. And that could work if it hadn't been for the second column which also has a text, this column is updated after every ticker has been moved from left to right.
What I would like to have is a function that would know what the text in the row that I delete, or remove.
This is what I have so far:
Code: Private Sub cmdMoveToLeft_Click()
Dim i As Integer, j As Integer, k As Integer Dim RowsStart As Integer Dim LastRow As Long Dim Rows As Integer
what is the vba code to delete the rows that the data you select from a list box. also how do you multiple select the data. the code i used is this
Sub RemoveDuplicate() Dim AllCells As Range, Cell As Range Dim NoDupes As New Collection Dim i As Integer, j As Integer Dim Swap1, Swap2, Item
' The items are in A1:A105 Set AllCells = Range("p21105")
' The next statement ignores the error caused ' by attempting to add a duplicate key to the collection.
On Error Resume Next For Each Cell In AllCells NoDupes.Add Cell.Value, CStr(Cell.Value) Note: the 2nd argument (key) for the Add method must be a string Next Cell................
