I have a template that needs to show one of 4 logos. The logo shown is the ONLY difference between the four models (A, B, C & D). My life would be much simpler if the template includes all four logos, and a switch controlled the one logo they want to see on each model. But the way I first programmed it absolutely KILLED my processing times for the model's many VBA macros.
What's the best way to accomplish this objective without sacrificing my VBA?
I hate to post this again, but I still cannot figure this out and I haven't gotten any response. I need help folks.
The code below forces a new file to download each time the workbook TEST_CASE_1.xls is opened. I can't seem to get it to kill the _temp.xls file or save the new file (without being prompted "Do you want save"). Any ideas as to what I am doing wrong?
I've got a sheet that I need to convert certain rows into CSV for a payroll package. I'm using excel 2003 on XP.
I have worked out a macro to save it as a csv file with a different name. The only way I managed to do this was by creating an xls file with the data I wanted and then saving it as a csv file with a different name. But now I need to delete the intermediate xls file (called pre CSV in this example). I have the following code which seemed to work first time but is now giving me the error "Runtime error 53 - File not found" and highlights the. What am I doing wrong?
The following code accesses the external aplpication 'Avaya CMS Supervisor' and loops through a worksheet full of data pulling reports. Everthing works great. After running this code there is nothing in Task Manager that is Avaya related, however when I try to physically open/login to the application it hangs at logging in.
In order to get physically logged in, you must shut Excel completely down. That's why I don't think this is Avaya related, but more something in Excel.
Sub AvayaExportServer1() 'These correspond to menu:Tools References associated with Avaya Dim cvsApp As New cvsApplication Dim cvsConn As New cvsConnection Dim cvsSrv As New cvsServer Dim cvsCatalog As New cvsCatalog Dim cvsRpt As New cvsReport 'Used in the For/Loop to increase rows by 1 from list of Avaya inputs on worksheet Dim x As Integer Worksheets("Server1").Activate
I have a list of names in C1 down that I want to count. There could be hundreds of names in C1 and I don't want to sumif all of them. There must be a simpler solution
Private Sub Workbook_Open() If ActiveWorkbook. Name = "UserA.xls" Then Call PreviewList Else Cancel = True End If End Sub
After the macro auto-startup, UserA works on the worksheet and input some procedures and save as ClientA.xls. However, before save as ClientA.xls and close, UserA wants to change the worksheet name and Procedure name as below, how to do that?
Private Sub Workbook_Open() If ActiveWorkbook.Name = "ClientA.xls" Then Call RevisedList Else Cancel = True End If End Sub
I have a directory that contain a large number of files. How do i preserve certain files with specific filenames while other files are deleted?
For example, I have files that are named : "58-26150B", "58-26200", "58-26200B", "58-26500B", "58-26550" etc. Please refer to uploaded screenshot.
The files that i want to keep from the above are "58-26200", "58-26200B". The code should be able to loop through the entire directory & preserve only specific files while deleting the rest.
Private Sub CommandButton18_Click()
Dim nWave As Integer, i As Integer Dim ConvergedFile As String, Pattern As String, KillFilePath As String, SimilarFile As String
nWave = Worksheets("nomogram").Cells(13, 4) For i = 1 To nWave ConvergedFile = CStr(Worksheets("nomogram").Cells(33, 3 + i)) 'Loop through list of wanted file names "58-26150", "60-25950" etc Pattern = Mid(Trim(ConvergedFile), 1, 3) 'Update the filename prefixes i.e. "58-", "60-" etc
I would like to perform a sum of randomly generated numbers between 0 and 6, but I want the number of independent random numbers to be dependent on another cell. I have =SUM(RANDBETWEEN(0,6) and then I get stuck. Is there a way to perform the RANDBETWEEN(0,6) a number of times stated in another cell? In this case that value is 67 but it will vary from around 5 to 150. I think there is a way to do this with macros, but I am not versed in visual basic. I am using Excel 2003.
I want to use the following kill command to delete all files in a folder:
Kill "C:dsmanagerest*.*"
However, I want the directory to be specified not within the code, but within a cell on a worksheet. Ie. Cell A1 would contain the directory C:dsmanager est*.*"
In Excel 2010, is there any way to paste a picture into a small picture/diagram box, and upon double clicking the picture it would explode to a larger size? And I guess double clicking it again would make it return to its original (smaller) size. I would be pasting several pictures into several different picture/diagram boxes and would need this to be a relative reference so that upon selection it explodes the appropriate picture?
I want to have a sample file in excel which store picture of student in comment, I did this, but when I want to insert picture the file dialog appears, and if I click cancel, then there is an error, why? If some one optimise the code it would be very nice
I have done the above where when I select a picture name from a drop down list it displays the relevant picture in another cell by using the IF function in the named formula
My question is why cant I use VLOOKUP instead of IF in the named formula. When I use it it comes with an error.
i have saved some pictures in my excel sheet. in the next sheet i want that when i write the picture name the picture will appear as vlookup helps in the getting text and nos. can i do this with pictures or i tried to get to much from excel.
I am putting together a price list in excel and using images and hyperlinks to jazz it up a bit - what I am finding is that if I insert a 25KB GIF image, the excel file grows in size by over 100KB
why is this disproportionate growth happening and is there a way around it - I dont want my Price List growing too large but need the images....?
In my workbook I have about 20 sheets (less in the attached sample), and on most sheets I’d like to query data for each day and find an average value based on the time and then copy that result into another sheet. I’m not sure if I’ll need 2 macro’s for this or if one can be used.
Here’s a quick description:
Assuming that I am currently in the sheet I want to run the macro, then I will either input “1:45” or “0:45” into a popup box, or I could always simply input the 1:45 or 0:45 in the code itself. I’m flexible
1:45:
If I input 1:45, then I’d like the macro to find the first 1:45 in Column B and the value in the same row in Column F will be used in the calculation. Once 1:45 is located, then the macro moves up to find 22:45 in Column B and the value in the same row in Column F will be used in the calculation.....
I'm looking for a formula that will calculate the difference in times between specific times while working with a 24 hr clock. Please see details below:
E3 provides the start time of 4:00 H3 provides an end time of 15:30
If an employee works betwen the hours of 0:00 (midnight) to 5:59, this is considered DIFF hours and is therefore the number I am seaking. So for the data noted above, the total DIFF hours worked is 2 hours.
I have the following code (just pasting the relevant section) which crashes when it reaches the highlighted line of code. and a dialog box pops up with the text: "Object variable or With block variable not set"
Sub test() Dim StartRng As Range Dim Buffer As Range
I thought I found a formula that would work, but it's not working. Each month I have to count the number of service tickets that have arrived between certain time ranges. They want to gauge during what times we seem to get the biggest batch of service requests.
6 am to 10 am 10 am to 5 pm 5 pm to 6 pm 6 pm to 6 am
The format of the cells are:
1:21:19 AM 1:28:08 AM 1:35:48 AM 1:49:19 AM 2:17:02 AM 7:14:38 AM 7:29:12 AM 8:08:28 AM 8:51:48 AM 8:54:19 AM
The formula I tried for 10 am to 5 pm: =COUNTIF(B2:B677,">="&TIME(10,0,0))-COUNTIF(B2:B677,">"&TIME(17,0,0))
It gives a result of 676, and I know from manually counting that there is only 327 cells that have a time between 10 am and 5 pm.
I included a spreadsheet that lays out what I am looking to do, basically I copied some times and speed from net. It shows up in non 24 hour format. I need to find the times and an associated speed for each row (day) directly before and after my inputted desired time. I've searched for days, tried different formulas with index,match, lookups,timevalue, time, etc and even tried using other peoples vba code without success.
i need to calculate between time. If a person is working between 8 till 12 and then 1 till 5 i need to count the instances between these times.. so if somebody is working between these hours a 1 should appear and if they have finished their shift or are on lunch then this should change to 0
On the attached Excel file, I have code that will insert a variable number of rows and copy and paste from and to variable positions. That all works fine when run from a command button, but when I try to run it from the Worksheet_Calculate by entering 1 in J1 or K1 (inrange cell is J1+K1 for testing purposes) the CommandButton1_Click sub runs continously until an error occurs.
I'm fairly new to macro's and VBA, by searching on the internet i've copied and pasted some code together into a macro. But it ends in a Run-time error 91...
The macro opens a target .xls file in a selected folder, performs copy - paste actions from masterfile to targetfile. Than it filters data in the targetfile sheet1 and copy's the results to the various other sheets; saves and closes the targetfile. The next target file in the folder is opened and the actions are repeated in this second target file. For the first target file this works smoothly; but for the second one (of a total of around 100) it does not copy the filter results to the other sheets in this workbook. The error message i get is: "Run-time error 91:Object variable or with block variable not set." When i hit debug it highlights the line "ActiveSheet.Next.Select" which, at least in the first file, seems ok.
I need a macro that will create a sheet at the end of the workbook.
Sum data from a variable amount of sheets and display that data on the created sheet.
Here is a step by step:
Starting on sheet 5.
Column D has a variable amount of part numbers in it. These part numbers would be different between the ascending sheets.
Column T, U, V has an inputed number in it that would need added up across all duplicate part numbers in all the sheets.
(Note: The data would also need started on row 4. Everything above row 4 is headers)
Here is a small example:
D E T U V 13019090W Part A1 68705500 Part B1 64202900 Part C-11 59634600 Part D1 26005300W Part E1
I need the macro to start with sheet #5(starting on row 4). Check to see if there is data in column T, U or V. If there is, to create a new sheet at the end. And copy the entire line into that sheet (starting on row 4).
After that, to check every sheet after (excluding the newly created one, starting on row 4) for data in Column T, U and V. And then check for duplicates in Column D on the newly created sheet. If there is a duplicate to add/subtract that number in Column T, U and V to the SUM in column T, U and V in the newly created sheet. If there is no duplicate, to copy the entire line to the new sheet.
So that when finished. On the new sheet, you have the SUM of T, U and V for everything that has data in T, U or V for all of the previous sheets, plus the entire line of the first instance (excluding the first 4 sheets).
I am trying to develope a "goto" page macro where the page value maybe 1,34,7A, 256C etc. I am not clear on how an inputbox value can be compared to a string variable or a numeric variable at the same time. This is what I have done, but when the texboxvalue is "7A" it doesn't work.
I Wrote a code which as intended to open each excel file in a folder and copy the data containing in it into a new sheet.
But While running the code the first excel file gets open, and an error message "Run Time Error 91-Object Variable Or With block Variable not set Error"
How to set the file which got opened from the folder to wbk variable.
Code: Sub dataintoonesheet()
Dim i As Integer Dim jk As Integer Dim j As Integer
