LOOKUP Question Ignoring Blank Cells
Sep 30, 2009
I am trying to add up wins and loses for individuals on a team. 6 players
There are 3 games per match and one match a week for 15 weeks. One sheet per week.
The players are inputted randomly each week. And the scores are entered after the match.
The following is a part of the formula that I am using but it returns a #NA because the cells in the weeks not played yet are blank, players and scores. Is there a better way to do this or a way I can ignore the blank cells until they are entered. Thanks in advance.
=SUM(LOOKUP($A$17,'Week 1'!$C$20:$D$23,'Week 1'!$E$20:$E$23),LOOKUP($A$17,'Week 2'!$C$20:$D$23,'Week 2'!$E$20:$E$23),etc.)
A17 is the players name, 1st range is where the players name would be entered, 2nd range is where the score is entered.
View 9 Replies
ADVERTISEMENT
Jun 15, 2009
I have a column with with Employee ID numbers, with anywhere from 2-5 blanks rows in between them. In another sheet I want a column that returns these ID numbers without the blank rows in between. All of the ID's begin with "N", for example:
I have:
N33333
(blank row)
(blank row)
N22222
(blank row)
(blank row)
(blank row)
N66666
I want:
N33333
N22222
N66666
View 9 Replies
View Related
Aug 10, 2009
I've got four columns of data. The first column contains pricing for a bunch of products from our company. The other three columns contain pricing for three other competitors. So for example:
Product | Our Price | Comp1 Price | Comp2 Price | Comp3 Price
Gloves | $4.59 | $5.00 |$6.00 | $3.56
Hats | $5.00 | | | $4.59
In column G right after Comp3 Price I have an IF statement that says if Comp1 Price is less than Comp2 Price, Comp3 Price, and Our Price, to print "Comp3" in that cell. If it is not less than the comparable data, then check Comp2 Price then Comp3 price in the same fashion. If Comp1, Comp2, or Comp3 is not less than Our Price then print "My Company Name." This will allow me to see who has the lowest price for that product and also tell me if that lowest price is lower than our price.
My problem is that I can't get it to work out so Excel ignores blank cells. So for example, Comp3 has the lowest price amongst our competitors for hats and is also lower than ours. But when I check for Comp3 price being lower than Comp1 and Comp2, it comes back as negative because Excel sees those cells as zeroes even though they're blank. My formula is:
=IF(AND(C2<D2,C2<E2,C2<B2),"COMP1",IF(AND(D2<E2,D2<C2,D2<B2),"COMP2",IF(AND(E2<C2,E2<D2,E2<B2),"COMP 3","MYCOMPANY")))
This would do exactly what I need Excel to do if it would ignore the blank cells. The problem is that Comp3 has pricing for hats because they offer hats, but comp1 and Comp2 don't offer hats at all, so naturally Comp3 has the lowest price; however, according to Excel Comp1 and Comp2 have the lowest price because the cells are blank and counted as zeroes.
So, does anyone know how to work this out so Comp3 will be counted as the lowest price for hats, ignoring the blank cells of Comp1 and Comp2?
View 10 Replies
View Related
Feb 5, 2010
I am trying to return the criteria MET, NOT MET & EXCEEDS. This works when each cell contains a number, but when one is blank the formula below returns "EXCEEDS" I'm guessing this is because is sees a blank as zero.
=IF(BN102<$BJ102,"NOT MET",IF(BN102>$BJ102,"EXCEEDS",IF(BN102=$BJ102,"MET")))
I've tried using this alternative but it still returns the same.
=IF(BO102<$BJ102,"NOT MET",IF(BO102>$BJ102,"EXCEEDS",IF(BO102=$BJ102,"MET",IF(ISBLANK(B102)," ",""))))
Basically I need to know how to make excel ignore the blank cell and not see it as zero thus returning "EXCEEDS". Although the cell values are integers they are derived from another cell using the following formula, I'm not sure if this makes any difference
=IF(ISERROR(VLOOKUP(BO11,$BH$63:$BI$87,2,FALSE)),"",(VLOOKUP(BO11,$BH$63:$BI$87,2,FALSE)))
View 3 Replies
View Related
Mar 25, 2012
I am trying to conditionally format the top middle and bottom thirds of a range of data. Problem is, that the range needs to be flexible as sometimes there may be a maximum of 36 cells with data, but sometimes there may be less (so there are blank cells in the range that need not be counted). The methods I have tried always include the blank cells, and so it is not equally formatting the thirds (as it includes the blanks cells as part of the bottom data)....
Here are the 2 methods Ive tried so far using excel 2003)
Top 34%:
=IF(INT(COUNT($D$3:$D$38)*34%)>0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D
$38)*34%)),MAX( $D$3:$D$38))0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D
$38)*67%)),MAX( $D$3:$D$38))0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D
$38)*100%)),MAX( $D$3:$D$38))
View 4 Replies
View Related
Aug 18, 2014
I have created a drop down cell based on the cells in the first row of a particular table. Now when i select a particular cell from the drop down i want to fetch all the values in the respective column of the selected cell on to a different group of cells. While fetching the data to those group of cells, i want to ignore all the null, blank cells. All this actions shall be automated and shall happen simultaneously on selecting the drop down.
View 1 Replies
View Related
Sep 5, 2009
Using formula rather than VB, I would like to calculate the number of blank cells that appear in a column BEFORE the first active cell but exclude any blank cells that appear after the first active cell. To elaborate, I have sheets that contain the days of each month and I need to exclude for other calculation purposes, the number of days (cells) where no entry of data has been input at the beginning of a month, NOT after the first data entry. ie. September has 30 days.
The first data entry is the 10th and there are no entries (thus far) after the 10th, the result that I seek, will be 20 (although only one cell has data), being the days left in the month AFTER the first entry. I have looked at COUNT functions but cannot find an solution. Perhaps it's not possible using basic formula?
View 4 Replies
View Related
Oct 24, 2011
I am trying to get a rolling 8wk avg of a large group of data. I am trying to take the avg of 8 vlookups:
=AVERAGE(VLOOKUP($A$9,'Raw Data'!$A:$DV,MATCH(B8,'Raw Data'!$2:$2,0), FALSE),VLOOKUP($A$9-7,'Raw Data'!$A:$DV,MATCH(B8,'Raw Data'!$2:$2,0), FALSE),VLOOKUP($A$9-14,'Raw Data'!$A:$DV,MATCH(B8,'Raw Data'!$2:$2,0), FALSE),VLOOKUP($A$9-21,'Raw Data'!$A:$DV,MATCH(B8,'Raw Data'!$2:$2,0), FALSE),VLOOKUP($A$9-28,'Raw Data'!$A:$DV,MATCH(B8,'Raw Data'!$2:$2,0), FALSE),VLOOKUP($A$9-35,'Raw Data'!$A:$DV,MATCH(B8,'Raw Data'!$2:$2,0), FALSE),VLOOKUP($A$9-42,'Raw Data'!$A:$DV,MATCH(B8,'Raw Data'!$2:$2,0), FALSE),VLOOKUP($A$9-49,'Raw Data'!$A:$DV,MATCH(B8,'Raw Data'!$2:$2,0), FALSE))
However, in some cases, the cell to be looked-up may be blank. Using the formula above, the result of these vlookups is "0". I want to take the average of these vlookups excluding the blanks from the 'Raw Data' sheet.
View 6 Replies
View Related
Dec 28, 2007
I have a workbook which has data in column A. I also have data in column I. What im trying to do is copy and paste the data from column I to A but if the cell in column I is blank I need that ignored and the data thats in column A at pres kept.
View 9 Replies
View Related
Feb 14, 2007
1. First thing I am trying to do. I have a column of cells that have multiple values, some with text and some with no values at all. I want to be able to display in A1 the most commonly occurring text in cells C1:C15, and be able to display in B1 the number of times that A1 occurs in the same range. Below are the formulas that I am using. There are two problems that I am running into: First, the formula returns a #NA error if any of the cells in the range are left blank. Second, the formula counts the spaces or zeros, so if there are more blanks than the word “amber” then A1 returns “ ” and B1 returns the corresponding number.
A1
=INDEX(C1:C15,(MODE(MATCH(C1:C15,C1:C15,0))))
B1
=COUNTIF(C1:C16,A1)
2. Second thing I am trying to do. In A2 I want to display the second most commonly occurring text in the range, with it’s corresponding count in cell B2, and the third most in A3 and B3, etc
Illustration:
C1 Amber
C2 Red
C3
C4
C5
C6 Red
Desired result:
A1 "Red" B1 "2"
A2 "Amber" B2 "1"
Results with forumla as posted
A1 " " B1 "3"
View 10 Replies
View Related
Oct 2, 2007
i have a list which is populated with data from another sheet.. if there is no data in the corresponding cell on the other sheet then the cell is blank.. i've tried using:
=OFFSET($Z$2,0,0,MATCH(REPT("z",255),$Z:$Z))
but it doesn't see the blank cells as blank i.e. no data in them as they contain formula's.. (even although there are no values populated) - can anyone offer any help in relation to this???
View 9 Replies
View Related
Apr 30, 2010
I am trying to create a formula which will look at the data in columns A - I (50 rows) and copy this data to columns K - S but ignoring any blank cells. Thereby consolidating the data in the upper rows with no spaces.
View 10 Replies
View Related
Apr 23, 2009
I'm trying to figure out if an employee is in probation period or not. I have this formula in S3 =IF(TODAY()-R3>90, "No", "Yes"). I need to leave S3 empty if no value in R3 (R3 contain hiring date)
View 2 Replies
View Related
Jul 25, 2006
I have a dynamic drop down validation List, which comes from another
spreadsheet list and have a few random blank cells in it. I need to
drop these blank values from the List without making any change in the
parent list. I may also have some duplicate values in the List and need
to drop them too.
View 13 Replies
View Related
Jun 20, 2014
So in Cell K12 there is a rather large formula (I condensed it for this example).
This formula is to average out the respective cells in column J. For each cell there is a possibility of 9 different entries. NRT, N/O, 1,2,3,4,5,6,7
So based on the formula in K12 I need Cell J12 to Display the answer.
if any one of the Cells referenced in the formula are NRT then I need it to Display NRT. Which the Formula does now.
The problem comes in when a Cell is N/O (Not Observed)
How do I get the formula to Ignore N/O currently I have it set up to recognize N/O as 0. But excel averages 0 in and it affects the answer.
I know in a simple formula I can add <>0 to the formula to ignore zeros. How to write it into a bigger formula such as in K12.
For example the current numbers in Cells J17:J25 should average 5 however the formula averages it as 1 because it calculates N/O as 0.
View 14 Replies
View Related
Feb 4, 2010
I've read dozens of threads on how to have conditional formatting ignore blank cells but I am not understanding how to make it happen myself...
Logic: Highlight the cells that are >=10 but ignore the blank cells that have functions in them
View 3 Replies
View Related
Aug 13, 2012
I wish to Concatenate contents of several columns into a separate column, i tried using the following "column1 & column2 & column3 etc..." however with this the blank cells get concatenated too...What should is use so that contents get concatenated but blank cells are ignored?
View 4 Replies
View Related
Oct 2, 2007
I have a range that is filled with formulae and the the number of rows in the range with data changes as the formulae reevaluate the inputs. So the rows with visible data changes between one row and 200 rows. By looking at the output in the first column of the range, Col M and finding the last row where the formulae returns data, I need a way of selecting across the columns of the range (M1 through to Qi) where i is the number of rows that have data in.
View 8 Replies
View Related
Aug 1, 2012
I have a sheet in an excel workbook which I export to a separate file and then save as a text document, I need to remove the tabs in this file, however the file (example attached) needs to be in a certain format to be imported into a piece of equipment which has a proprietary file format. Part of this format is the 2nd row and 5th row must remain present and empty.
[URL]
View 4 Replies
View Related
Oct 24, 2013
The way I have this set up right now is that data is being submitted by an Infopath Web Form and emailed to me, it produced an XML file with values for all the possible entries for each person but only certain departments are filling in certain blocks.
That XML file is uploaded into a worksheet and then I'm trying to process data off that table to get the information I'm needing. I'm trying to divide data if a certain piece of the formula matches (IF CCU & August then Divide F column on same line by G column on same line and display the result)
I'm also trying to ignore empty blocks which is where my problem is at. So far I've come up with
[Code].....
but that is only working if the data happens to match on the same line in the data table.
Added the excel workbook: patientdashboardexperience.xlsx
View 1 Replies
View Related
Aug 8, 2014
I want to count back the last 6 cells in column S which has data (ignoring any blank cells) and add them up.
My data is ranging betwen S62:S143 (with S144 being the cell that I want to show the total for the last 6 cells with data). I have column headings and various other bits of data from S1:S61 that I want to exclude completely but need to keep for historical purposes.
Here is an example of some of the data in column S:
56
BLANK CELL
BLANK CELL
BLANK CELL
45
34
BLANK CELL
BLANK CELL
37
BLANK CELL
BLANK CELL
42
BLANK CELL
46
49
BLANK CELL
BLANK CELL
36
35
This is my formula so far:
=SUM(OFFSET(S62,0,0,COUNTA(S62:S143)))
I have tried adding a negative and positive number on the end of the COUNTA formula but all it does is count all the cells within that given heigh range, not a specific number of cells with data.
I don't specifically need to use SUM. As long as I get a total.
View 3 Replies
View Related
Aug 20, 2009
I have a range of cells (B6:M6) and I want to count how many have data. My problem is that all of the cells reference cells on another worksheet. Every cell starts out like =Bethlehem!B6. I want to ignore cells that have a reference in it when I count. I know how to do it if you want to ignore these cells as follows: =countif(b6:m6,"<> 0"). Those cell references return a 0 if they have no data in them. However, a user might actually enter a 0 in the referenced cell and I need to count that one. The above formula would exclude it.
View 4 Replies
View Related
Oct 18, 2009
I want to average the cells in column B but ignore values in the corresponding rows with a 1 or 7 in column C.
This will be used in a years data where 1 - 7 are days of the week and I want to separate weekdays from weekends when calculating an average.
View 9 Replies
View Related
Jul 16, 2008
=IF(Z2="","",Z2&","&IF(AA2="","",AA2&",")&IF(AB2="","",AB2&",")&IF(AC2="","",AC2&","))
I'm using the above formula to join text from columns Z through AC, separated by a comma. I now want to remove the comma at the end of the new string. Also, I would prefer it if the four cells were separated by a slash rather than a comma, but when I simply replace the commas in the formula with slashes I get an error.
View 9 Replies
View Related
Nov 24, 2008
I don't know if this is best in a formula or macro but what I am trying to do is create a list of data with no empty cells from a list of data with empty cells.
What I want to say is if A1 is blank move to A2, if it's not return the value in A1 to B1. If A1 and A2 are blank then return the value in A3 to B1 and so on. Generally it's a sort function but I want it to happen automatcially and lkeep all my values in the original order
Original Version:
Date 1/4 Value 1/4
23/02/199913.506
5/05/199911.901
14/05/199912.152
24/05/199911.607
7/06/199911.187
29/07/199911.828
2/09/199910.473
6/09/199910.429
Desired outcome:
Date 1/4 Value 1/4
23/02/199913.506
5/05/199911.901
14/05/199912.152
24/05/199911.607
7/06/199911.187
29/07/199911.828
2/09/199910.473
6/09/199910.429
View 9 Replies
View Related
Dec 20, 2012
I have to correct a spreadsheet that takes a bunch of values and creates an average.
=average(N15;N29;N43;N57;N71;N85;N99;N113;N127;N141;N155;N169;N183;
N197;N211;N225;N241;N255;N269;N283;N301;N315;N329;N343;N357)*100%
I didn't create this. Anyway, the problem is that most of these cells will be empty unless a whole bunch of other stuff is filled. These N cells take several values, put them together and create a new one. As time goes by they are filled. While they aren't filled, they'll return the DIV/0 error.
So when that formula I pasted there uses all of these values, it also returns a DIV/0 error because it is getting info from cells that have this error.
I managed to correct that with this
=averageif(N15:N357;"<>#DIV/0!")*100%
It works like a charm save for one problem. When I use averageif I'm forced to use an interval. Along this interval other values show up (it is always a value ranging from 0 to 2). So when the formula works its magic the results are slightly skewed because of this other value that I don't want.
So I figure there must be two ways around this. The first one would be using something like averageif that lets me use several handpicked cells instead of an interval. If I try
=averageif(N15;N29;N43;N57;N71;N85;N99;N113;N127;N141;N155;N169;N183;
N197;N211;N225;N241;N255;N269;N283;N301;N315;N329;N343;N357;"<>#DIV/0!")*100%
It doesn't work, it says I have too many values. So if I could the exact same thing as I did with averageif but keeping all of these values it'd be super nice.
The other solution, less nice but equally effective I guess, is using this same interval but having more than one criteria. The first criteria would still be the one telling it to ignore DIV/0 error, the second criteria would be the one to ignore any values equal or lower than 2.
View 5 Replies
View Related
Mar 7, 2012
Any way to automatically "rank" cells, ignoring any hidden rows? I don't even really need Excel to sort for me (although I wouldn't be opposed to that), but I'd like the first non-hidden cell in column A to always say "1" and the second one to say "2" and so on.
The back story, if you need it: I have a spreadsheet that tracks sales for 2 separate brands. I've created a macro and linked it to a listbox, so that you can choose which brand you want to view and Excel will hide all rows that aren't pertaining to that brand (I'm absurdly proud of that accomplishment). The only problem is the rankings are hard-coded, so when you hide one brand the rankings no longer make sense.
Every Monday I sort the items by the most recent week's sales and rank them from there. The addition of a second brand is obviously new to my little spreadsheet!
View 1 Replies
View Related
Jul 6, 2012
I have two columns, some of the cells in these columns contain more than one value separated by a space. Example:
Col A Col B
1.99 1.69
39.95 6 119.94 29.99 6 149.94
135 250 135.00 250.00
11.6 11.60
What I am trying to achieve is to test that the values in column A match those in column B and have a TRUE/FALSE response in column C. At present i'm just using =a=b, however I want the formula to give me a TRUE response for the third and fourth lines in my example, as I want it to ignore the zero after the decimal place, at present it gives me FALSE.
So the results I want to see in col C for the above example are:
FALSE
FALSE
TRUE
TRUE
View 4 Replies
View Related
Dec 4, 2013
1.jpg
I wan to calculate the average for three cells not in Sequence using AVERAGEIF with condition (VALUE >0)
View 5 Replies
View Related
Sep 27, 2013
I'm using Excel 2010.
I have created a spreadsheet with 3 month inspection schedules on using the formula below.
=DATE(YEAR(C50),MONTH(C50)+3,DAY(C50))
I then copy this in to a cell where I want the date to appear... and then in to another cell where I want a further 3 month date to appear. Obviously changing the cell reference.
I would like the formula to ignore the very first cell "C50" if there is no date inputted in this cell.
View 2 Replies
View Related
