I'm using the above formula to join text from columns Z through AC, separated by a comma. I now want to remove the comma at the end of the new string. Also, I would prefer it if the four cells were separated by a slash rather than a comma, but when I simply replace the commas in the formula with slashes I get an error.
I want to count back the last 6 cells in column S which has data (ignoring any blank cells) and add them up.
My data is ranging betwen S62:S143 (with S144 being the cell that I want to show the total for the last 6 cells with data). I have column headings and various other bits of data from S1:S61 that I want to exclude completely but need to keep for historical purposes.
Here is an example of some of the data in column S:
I have tried adding a negative and positive number on the end of the COUNTA formula but all it does is count all the cells within that given heigh range, not a specific number of cells with data.
I don't specifically need to use SUM. As long as I get a total.
I am using a simple SUM formula like this, =SUM(D10:E10). I would like for the SUM cell to be left blank until a value is entered into the cells D10. Currently it calculates the SUM as 0.
Trying to determine the best way to do this. I understand that the standard AVERAGE function will ignore blanks if given a range; the function I'm using does a search for a particular value to determine if a value is to be included in the averaging: ...
I have a column of week numbers but some gaps in the list (e.g. the job is complete and so I do not want to reference it) I am trying to create a list of jobs by week number. I need to sequentially number jobs to then use Vlookup e.g. job1-week1 job2-week1 etc to display be week.
I can work out to number the list ignoring the blanks but then resetting to 1 with each new week?
I have a set up of investments. Say A1 through to G1. Then on the next row the investments range from A1 to G1 again. This continues down many rows. There are spaces such as D1 and D2 through E2.
A B C D E F G 1 ausbil........................
Starting in column H, I would like to list the investments but ignore investments that have already appeared on the row (ie list only the first occurence) and ignore the blanks as well. For example, D1, E1, F1 are to be ignored because of the blank, and the fact that ausbil and amp already appear. In row 2, the blanks in D2 and E2 are ignored as well as the repeated 'amp' in F2. So the table should look like below from column H:
H I J K 1 ausbil amp vanguard bt 2 amp becton fidelity bt
Is there a simple formula for this? It has to be in rows as I have at least 60 columns of data before these columns begin. There are at least 300 rows.
I am wanting to have a sheet that I use for reporting based on another sheet in the workbook but I want to exclude items that are closed.
The first sheet will contain all rows of data with a status column of either Open, On Hold or Closed In the second sheet I only want to have listed the items which are Open or On Hold, I want to ignore the closed items.
In the example enclosed, I only want rows 2,4,6 and 7, but NOT 3 and 5 due to status.
I have a spreadsheet with a bunch of formulas in Cells B4:E100 in Sheet1. Many of the formulas will show up blank information in the event I do not have any data in Column A. I then have formulas which perform a similar function in Cells G4:Q100, S4:AC100, AE4:AO100 & AQ4:BA100.
What I need to do is to take the data from the last 4 sets of cells (G4:Q100, S4:AC100, AE4:AO100 & AQ4:BA100) and stack then one on top of the other into Sheet2 starting in Cell A2. I need the code however to be smart enough to realize that if there are blanks which exist in any of those sets of cells to skip over to the next set of data I which to copy and start pasting that set of information without leaving any blanks.
So far example, if I only have data between Cells A4:A25, I want the VBA code to go only through cells G4:Q25 and then start pasting without any spaces S4:AC25 and so on.
the problem is that when both if statements are true i want it to get the row number, this is because table1 has blank rows (can not be avoided as the data is linked from a closed workbook)
i can see this works up until it meets the first blank row and i get #value error.
on table1 data exists on row 1,2,5 and 8 so my problem is getting the small function k to report these numbers?
I am trying to create a weighted average which will skip any row when Column B say's "yes" and then if Column N contains, a 0, I would like that to be skipped as well. The below works for skipping any row with the word "Yes", but it still includes 0 in the weighted average. Also, let's say the Column N contains a word and 0's, how can I skip that?
I have a column of numbers that are derived with a formula. I need to Average only the ones that either have a Positive or Negative number, ignoring blanks or zero.
I have tried Search but couldn't find anything that address both blank and zero.
I have two sets of two columns which contain numbers as text with trailing spaces and I want to concatenate column A and B and concatenate column F and G, and then compare them, and sumif value in column I if they are the same - giving the answer in the same row as the matching data in column A and B.. but in column J.
I’ve seen sum product and haven’t been able to get it to work at all. I have been adding the trim() function in around the column references to see if that would work but am failing…
A = 2000 text B = 1234 text
F = 2000 trailing spaces, text G = 1234 trailing spaces, text
I = 10,000
Answer in column J
I want 20001234 = 20001234 = 10,000 for the whole column.
I don't want to change the original data as its externally sourced and used for other links etc.. This would save a few hours a week if i ( more correctly, you ) could get this to work.
I wish to Concatenate contents of several columns into a separate column, i tried using the following "column1 & column2 & column3 etc..." however with this the blank cells get concatenated too...What should is use so that contents get concatenated but blank cells are ignored?
How would I concatenate a large range of cells, most of which are blank, and add a comma between each cell's value? My range is E2:Y2 (I will be filling down), but most of the cells are blank. For example, if I F2=9, I2=11 and X=25, I would like to display them as: 9,11,25. If in the next row, G=10, K=15 and Y=27, they should look like this: 10,15,27.
I'd like to concatenate the two columns in the file I've attached as a string of text that I can copy to another sheet. The second column in the file attached will be a vlookup from another sheet. However as shown in the file, I'd like to ignore blank cells and only concatenate if they have data in them.
I have copied the following codes to create a Function of "Concatenate a Range Skip Blanks". However, I humbly seek help to add "," in between every word and also take away the empty space when there is only 2 words are concatenated. Pls refer to my attachement for easy understanding.
I have come up with this to Trim all of the data from rows 2:30 removing any trailing spaces after the last word in each cell. The macro takes a couple of minutes to run have I got something wrong that is making it run slowly or does the Trim process just take longer?
Sub TRIM_RANGE() Dim myRange As Range Dim myRow As Range Sheets("CAMPAIGNS_2007").Select Set myRange = Range("2:30") If myRange Is Nothing Then Exit Sub Application. ScreenUpdating = False myRange.Replace What:=Chr(160), Replacement:=Chr(32), _ LookAt:=xlPart, SearchOrder:=xlByRows, MatchCase:=False For Each myRow In myRange.Columns If Application. CountA(myRow) > 0 Then myRow.TextToColumns Destination:=myRow(1), _ DataType:=xlFixedWidth, FieldInfo:=Array(0, 1) End If Next myRow Application.ScreenUpdating = True End Sub
Desired results obtained via IF =IF(B2>0,A2&" , ",A2)&IF(C2>0,B2&" , ",B2)&IF(D2>0,C2&" , ",C2)&IF(D2>0,D2,"")
one , two , three , four one , two , three one , two one
Is there any smarter, shorter formula via Concatenate and Substitute or other formulas ?
My closest match, but not good enaugh is =SUBSTITUTE(CONCATENATE(A2&", "&B2&", "&C2&", "&D2), ", , ", " ") [ returna 2 commad ] one, two, three, four one, two, three, one, two one ,
I'm trying to trim all the data in my worksheet in order to prepare it for several steps of further analysis. Running the below code will cause an error that I don't understand. It says:
Runtime error '1004': Application-defined or object-defined error
the code is (error causing line indicated in comments):
PHP Sub trimAll() Application.ScreenUpdating = False Dim Rows As Long Dim Column As Long Dim i As Integer Rows = ActiveSheet.UsedRange.Rows.Count Column = ActiveSheet.UsedRange.Columns.Count For i = 1 To Column Columns(i).Select Selection.Insert Shift:=xlToRight ActiveSheet.Range(Cells(1, i), Cells(Number, i)) = "=TRIM(RC[1])" ** ERROR ** Columns(i).Select Selection.Copy Columns(i + 1).Select Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _ False, Transpose:=False Columns(i).Select Selection.Delete Shift:=xlToLeft Next i Application.ScreenUpdating = True End Sub
I am trying to conditionally format the top middle and bottom thirds of a range of data. Problem is, that the range needs to be flexible as sometimes there may be a maximum of 36 cells with data, but sometimes there may be less (so there are blank cells in the range that need not be counted). The methods I have tried always include the blank cells, and so it is not equally formatting the thirds (as it includes the blanks cells as part of the bottom data)....
Here are the 2 methods Ive tried so far using excel 2003) Top 34%: =IF(INT(COUNT($D$3:$D$38)*34%)>0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D $38)*34%)),MAX( $D$3:$D$38))0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D $38)*67%)),MAX( $D$3:$D$38))0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D $38)*100%)),MAX( $D$3:$D$38))
I have thousands of path names in a spreadsheet that were converted to hyperlinks, but my client wants to see only the filename in the hyperlink, not the whole path.
I created the hyperlinks by applying the following to the column containing the file paths: ....
I am working with a spreadsheet and rather new to be VBA. How do I select a range that only has data. I currently have the following macro, but when I run it, it checks every cell in the active worksheet which cause the application to hang. I would like it to automatically select only cells that have data in them ignoring all empty cells. I need this to be an automatically process running without the user selecting a range of data.
My requirement is to remove the spaces in the text in each cell in a worksheet. i have used TRIM function for this. Sheet1 will have the imported data and sheet 2 has the formula to TRIM. i have an issue when using TRIM on date format. I have used formula TRIM(sheet1!Ax) for columns 1,2 and 3 and TRIM(TEXT(pcload!D1,"mm/dd/yyyy")) for column 4. But the blanks cells in sheet 1 have a value of 01/00/1900 in sheet2. I need the blank cells to be displayed as blank in sheet2.
I have a range of cells (B6:M6) and I want to count how many have data. My problem is that all of the cells reference cells on another worksheet. Every cell starts out like =Bethlehem!B6. I want to ignore cells that have a reference in it when I count. I know how to do it if you want to ignore these cells as follows: =countif(b6:m6,"<> 0"). Those cell references return a 0 if they have no data in them. However, a user might actually enter a 0 in the referenced cell and I need to count that one. The above formula would exclude it.
I've got four columns of data. The first column contains pricing for a bunch of products from our company. The other three columns contain pricing for three other competitors. So for example:
In column G right after Comp3 Price I have an IF statement that says if Comp1 Price is less than Comp2 Price, Comp3 Price, and Our Price, to print "Comp3" in that cell. If it is not less than the comparable data, then check Comp2 Price then Comp3 price in the same fashion. If Comp1, Comp2, or Comp3 is not less than Our Price then print "My Company Name." This will allow me to see who has the lowest price for that product and also tell me if that lowest price is lower than our price.
My problem is that I can't get it to work out so Excel ignores blank cells. So for example, Comp3 has the lowest price amongst our competitors for hats and is also lower than ours. But when I check for Comp3 price being lower than Comp1 and Comp2, it comes back as negative because Excel sees those cells as zeroes even though they're blank. My formula is:
This would do exactly what I need Excel to do if it would ignore the blank cells. The problem is that Comp3 has pricing for hats because they offer hats, but comp1 and Comp2 don't offer hats at all, so naturally Comp3 has the lowest price; however, according to Excel Comp1 and Comp2 have the lowest price because the cells are blank and counted as zeroes.
So, does anyone know how to work this out so Comp3 will be counted as the lowest price for hats, ignoring the blank cells of Comp1 and Comp2?
I am trying to return the criteria MET, NOT MET & EXCEEDS. This works when each cell contains a number, but when one is blank the formula below returns "EXCEEDS" I'm guessing this is because is sees a blank as zero.
Basically I need to know how to make excel ignore the blank cell and not see it as zero thus returning "EXCEEDS". Although the cell values are integers they are derived from another cell using the following formula, I'm not sure if this makes any difference