I have a file in which column a shows product names, and columns b and c contains quantitative data. I want to put this in a bubble graph (column b = y axis) and (column c = x axis) and label the bubble with the product names. I tried to make this graph but either it doesn't show labels ,either it doesn't provide bubbles. How can i label the bubbles? I attached a small sample file.
View 4 RepliesIm trying to create a simple 3D Bubble Chart macro, and as most people who've never dealt with this before (i think), i've hit a wall with BubbleSizes. I've attached the file im trying to get to work. The VBA is quite simple but an error occurs at BubbleSizes. I've read that BubbleSizes takes a different reference style than xValues and such, but haven't had any luck trying to change that. For those who just want to see the code without getting the file:
Sub EmbeddedChartFromScratch()
Dim myChtObj As ChartObject
Dim rngChtData As Range
Dim rngChtXVal As Range
Dim iColumn As Long
' make sure a range is selected
If TypeName(Selection) <> "Range" Then Exit Sub
' define chart data
Set rngChtData = Selection
' add the chart
Set myChtObj = ActiveSheet.ChartObjects.Add _
(Left:=250, Width:=375, Top:=75, Height:=225)
With myChtObj.Chart................................
When you hold your mouse over a bubble on a bubble chart, it typically displays the x value, y value and size value. Is there any way to add other captions to display? For example, if my chart is based on sales data and I'm plotting a point based on ease of probability (x axis) and dollar value (y value)....I'd also like to see the initials of the salesperson assigned to that prospect when I hover over the bubble?
View 2 Replies View RelatedI'm trying to create a bubble chart created on three different columns of data. I'd like the following:
-The X-axis should just show the first columns of dates I have stored.
-The Y-axis should be the number of lots of a product that I bought of a certain product.
-I'd like the actual bubbles to not only represent the number of lots purchased on the given date, but I'd like the size to be represented by the third column, which is the average price of each lot.
Is there a way to do this? I've been trying to maneuver it around all morning, and can't seem to get it how I want it. I'm not sure if I'm ordering the columns incorrectly or what.
I would like to display the latest data label value for a data series So if I update my table for period 2 the chart should update to display only this value. Then period 3 and so on Workbook attached
View 3 Replies View RelatedI am applying for a job as an executive assistant and before the interview I have to complete a "test." I am having trouble with one direction. Here is the question:
"10.Apply series name and legend key in data labels to the Star data series. "
I have included what I think is the correct answer, but I am not sure. It is under the column chart sheet.
I am building automated solutions where graphs source data is based on outcome of formulas. In case of line graphs I use #N/A as result if no data is available or formula results into an error - this way the data point and data label will not be shown in the graph.
However this does not work for bar graphs - with #N/A, #DIV/0, 0 or "" the bar itself is not shown but the data label is shown (as #N/A or 0). How can I set-up my formulas so that if result is 0 or formula is in error that the graph does not display the data label.
Attached excel file shows same data in 2 charts - 1 line chart (=OK) and 1 bar chart (=not ok). The data for chart is pulled from 2 other tabs (week&month) and merged into 1 data source for graphs.
In an "Bubble" chart, can bubbles be replaced by rectangles that can be sized by width and height?
I have seen Andy Pope's Pie-Bubbles, but I don't think that gets me there.
I have two userforms with a label which displays CompetitorID. I want to transfer content (displayvalue) from UF1.label to UF2.Label. I know labels don't have a value property but want to simply know if it can be done as presently I'm getting run time error 380, can't set property value.
VB : HeadEntryForm.lbCompID = Me.lbCompID ' trf selected competitor ID to ID field on HeadEntryForm
I have a spreadsheet with a customers information and various parts we make for them. I need to be able to take this information and incorporate it into a label format. I need something quick and easy as there can be 150 parts per customer
Customer: ABCD
Customer PO: 12345
Part Number Quantity
AB 1
** 15
EF 22
GH 14
and I need it to output:
CUST: ABCD PART: AB
PO: 12345 QTY: 1
CUST: ABCD PART: **
PO: 12345 QTY: 15
CUST: ABCD PART: EF
PO: 12345 QTY: 22
CUST: ABCD PART: GH
PO: 12345 QTY: 14
I have a userform in Excel and I would like to have a label calculate from the sum of 3 different labels. I have tried a few ways of which none worked.
This is what I currently have. This returns $0.00 in the label value but does not calculate...
Code:
Public Sub TotalCACost()
If TextBox12.Value > "" Then
Label685.Caption = ""
[Code]....
The reason that I have it as a public sub is that I am calling it to Private Sub extBox12_Change() as well as a couple of other textboxes so that when ever TextBox12 or the other textBoxes gets changed, the value will recalculate. The "other textBoxes" change the values of label443, 444, 445, 385, 386, 387 etc..
I created a userform where if a value from cell x is true then the label caption changes to value in cell z. While everything works fine, the label caption does not seem to appear in my userform until i click on the label. Is there anyway that it can appear automatically once the userform opens?
Also example of my code is:
Private Sub EventDateResult_Click ()
If Range("A5") = "1" Then
Me.EventDateResult.Caption = Range("N4")
End If
End Sub
create a Quadrant Bubble chart. I have found examples of using scatter charts but unfortantely those charts do not satisfy what I am trying to accomplish.
View 5 Replies View RelatedI'm working for a local authority who have been given a mass of survey data. In this particular task, residents of each small district within our area have been asked their levels of satisfaction with a service, and how important they think that service is. I want to plot these two values against each other using a scatterplot, and label each service.
Excel does not automatically allow this so I used a very good sheet from the forums here: Attach labels with names to the points in a scatter plot. It's the top file, and works well. However, I can't seem to customise it for my own data.
Problems include:
- Excel often freezing when I try to run it
- Not all the data being picked up for the chart
- Incorrect labels being picked up..........
My DB is in table format . I use this table as source data for 2 barcharts and 1 pie chart.Following are my table headers
Costs|exp heads|Month1|Month2|...|Month n|Spark lines|Average
When i add a month coloumn,Sparklines and Average coloumn should get updated automaticaly.Now this is not happening even if the data is in table format.I also want the graphs to be automaticaly updated.
I created a bubble chart whose x-axis and y-axis show every 10th value between 0 and 100 (i.e. 0, 10, 20, 30...). The axes intersect at (50, 50) to create 4 quadrants.
I want to erase/hide the values on the axes (i.e. the axes will no longer show 0, 10, 20, 30... and at the same time, the bubbles will still be in the same place) to create 4 blank quadrants and make my bubble chart easier to look at.
I have the table: chart1.png
If the bubble size is 0-5, I need the bubble color to be green
If the bubble size is 6-15, I need the bubble color to be yellow
If the bubble size is 16-25, I need the bubble color to be red.
So, right now my chart looks like this: chart.png
As you can see the top bubble is the right color, but based on the bottom bubble value, it should be green.
How do I make this change colors dynamically based on the bubble size value?
I have the Lat and Long for each of several US cities. I want to use these to create a bubble chart that plots the cities and which I can place over a US map picture.
However, I have the problem that, because of the curvature of the earth, the city locations form the lat and longs are not tying with the map.
how to adjust the lat and longs so that they will correspond to the typical US map?
For example, the base lat and longs for Denver are 39.5742 and -104.8588. What formulas can I use to modify these to match the standard map projection?
I’m trying to take an existing bubble chart, paste new data into the sheet,
then march sequentially from row to row, adding specific cells within each as a new series in the chart until I run out of rows. Below is my latest attempt (not working of course).
Sub setseries1()
Range("A1").Select 'select upper left cell to start
Do Until ActiveCell.Value = "" 'stop when you run out of rows
ActiveChart.ChartArea.Select
ActiveChart.ChartType = xlBubble
With ActiveChart.SeriesCollection.NewSeries
'use these values for the next series
.Name = ActiveCell.Offset(1, 0).Select
.BubbleSizes = ActiveCell.Offset(0, 1).Select
.Values = ActiveCell.Offset(0, 1).Select
.XValues = ActiveCell.Offset(0, 9).Select
End With
'go to next row, and repeat
ActiveCell = ActiveCell.Offset(0, -1)
Loop
End Sub
I have a worksheet where I am collecting data and a seperat Chart. The first part of this code which adds a new row in my table works perfectly fine, but the latter part (based on a macro recording) does not. I need to specify the relevant row for the new series in the bubble chart. The colums are of course the same.
Private Sub CommandButton1_Click()
Dim LastRow, LastRef As Long
'Works!
ThisWorkbook.Worksheets("Projektradar - input").Select
Range("Q3").Activate
LastRef = ActiveCell.Value
Range("Q3").Value = LastRef + 1
I'm trying to make a macro that generates a bubble graph from a defined range. I however can't seem to get the SeriesCollection.NewSeries to work.
Dim nr As Integer
Dim myChart As ChartObject
Set myChart = ActiveSheet.ChartObjects.Add(Left:=100, Width:=375, Top:=75, Height:=225)
myChart.Chart.SetSourceData Source:= Sheets("Sheet1").range("A2:D2"), PlotBy:= _
xlRows
myChart.Activate
With ActiveChart.SeriesCollection.NewSeries
.Name = ActiveSheet.Cells(nr + 1, A)
.XValues = ActiveSheet.Cells(nr + 1, B)
.Values = ActiveSheet.Cells(nr + 1, C)
.BubbleSizes = ActiveSheet.Cells(nr + 1, D)
With .Interior
If Cells(nr + 1, G) >= 50 Then
.ColorIndex = 4
Else
.ColorIndex = 10
End If
End With
End With
myChart.Chart.ChartType = xlBubble
I have 3 departments, each with a value. I want to sort from lowest value to greatest (which I have done) but some departments won't have a value and therefore will have "n/a" in the place of the value. When sorting, "n/a" always comes out as the greatest value but I want "n/a" to be the lowest value - since it means there is no value.
Here is an example of the data:
Depts: Value:
580 15.75
558 19.01
538 n/a
Here is the code (sorting is being done on the value obviously, and the switching of the Depts to stay with the value is also done in the code)
Private Sub RankPerformance()
Dim bytValuesArrayCount As Byte
Dim A As Byte
Dim B As Byte
Dim vTemp As Variant 'must be type since value can be number or string ("n/a")
bytValuesArrayCount = UBound(ValuesArray)
The only way I know to do it is to sort using the above code, then do another type of sort if a value is not numeric then it is placed at the end...but I'm trying to make the code as efficient as possible
Let Sheet 1 have data in 3 columns to support a standard bubble chart
Col A: X Values
Col B: Y Values
Col C: Bubble Size
Id like to be able to color the bubbles according to the Y values, whether the Y values fall within the following ranges
Green for Y <=2
Orange for 2<Y<=5
Red for Y > 5
Im assuming some straightforward VB code is in the works but Im not quite there yet
I am looking to create a dynamic bubble chart. To do this I am using offset to create the series formula which without listing all the data names turns out to be something like this (where 297 will adjust to the number of rows with data): =SERIES(Project!$A$5:$A$297, Project!$J$5:$J$297,Project!$P$5:$P$297,2,Project!$Q$5:$Q$297)
My problem is that by creating the chart in this fassion I am unable to get a unique name for each data point. For example, if row A looks like this,
A5: 1
A6: 2
A7: 3
each data point will be named 1 2 3. How do I either create a new series for each row dynamically or get the specific name from column A to associate with the correct data point?
I am trying to put some charts into a report that is pivot table based. I have some code that will work if the pivot tables stay stagnic but the users may change the tables around so that could be an issue of new data. I have the following code where I changed the source to the pivot table name (general name because of numberous report possibilites). I have taken out the other charts because they are just a variation of the chart 1. I am crashing on the line with the * on it.
Sub UWTierChart()
Dim oCell As Range
Dim oChart As Chart
Set ws_data = ActiveSheet
'Chart 1
Sheets(wsPT).Select
Range("B21").Select
[code]....
I am trying to format the colors of the bubbles on my bubble chart to Green (>5), Yellow (4-5), or Red (<4) based on the value used to create the bubblesize.
The problem that I am having is that .BubbleSizes is property of type String, not range like .xValues, or .Values. So instead of pulling in the value, I am pulling in the reference and getting a "Type Mismatch" Error. The reference of my data for .BubbleSizes is $D$5:$D51. Each row is it's own series and the list is dynamic, so I need to be able to support future rows without a lot of maintenance.
Here is the code that I have so far.
VB:
Sub DataSeriesFormat()
'
' DataSeriesFormat Macro
' Format Data Series based on defined parameters for Green, Yellow, and Red. Created by Derek Steinmetz 7/24/12
'
Dim x As Integer
Dim val As Variant
Dim Green As Range
[Code] ......
I am new to excel and to the bubble chart function and need creating one for a presentation.
I was asked to do a bubble chart to show the open and click to open percentage by subject line
E.g.
Subject line: Win 20% open, 23 % Click to Open, Getaway 20$ Open, 21% CTO etc., to include an industry average for open and CTO in the chart.
X axis: click to open and Y axis: open
I tried the following in the picture and it doesn't look right.
Capture.JPG
I would like combine (overlay) a bubble chart with a connected point scatter chart. I understand that, without VBA, this is not possible. However, I understand that, by using VBA, the markers of a scatter chart can be configured as circles with their size proportional to values in a specified column. This pseudo-bubble chart can then easily be combined with a connected point scatter chart.
My question is: does anyone have any VBA code to share that shows how to configure a scatter chart as the type of pseudo-bubble chart described above.
I would like to combine / overlay a bubble chart and scatter chart with straight connectors.
I understand that, without VBA, it is not possible to combine a bubble chart with a scatter chart.
Unfortunately, I am a VBA newbie, and so I cannot write my own code (though I can usually adapt code to my specific environment).
My question is: does anyone have VBA code to share that will convert a scatter chart series (x,y data in 2 columns) to a bubble-style chart (bubble radius in 3rd column)?
I need to print quite a few mailing labels for Christmas cards from an Excel 2000 Worksheet. Could someone list the steps I must take to do this?
View 2 Replies View Related