I have a UserForm that contains a progress bar. This bar is updated dynamically as the code progresses, but for some reason the lables on the form are not updating themselves. I have tried adding a time delay to see if it is that but to no avail. Code Below.
View 2 Replies
can't get the data to update right. It updates the cells but also overwrites the first person's name.
View 5 Replies View RelatedI am trying to update a Textbox from two Listbox's and several Textbox's as the user enters values (or double clicks the textbox for a value). (DoubleClick code is completed). I have ten textbox's to enter data into (or double click for prior data stored in the registry). Two Listbox's requiring one selection each. The last textbox (textbox11) produces the text as it is being entered from the previous ten, I currently enter the data in a specific order to build my string, which I want to stick to. If the user has entered the wrong data in any of the active textbox's I would like to be able to update the string shown in textbox11 without losing any data from the string.
Hence where my brain cells are popping. My current code (laughing is a pre-requisite). Is in the next two posts due to character length restrictions (no dis intended). Attached is a screen shot of the userform. In the textbox labeled "FCF" all the data you see that is not in any of the textbox's or listbox's is written in from code.
I have some code that runs in conjunction with a userform progressbar....
I launch my progress userform like this from a userform commandbutton:
Load UserForm6
UserForm6.Show
(I suspect the load command may not be needed....)
Then when my progress userform launches:
Private Sub UserForm_Initialize()
Call UpdateTasksAll
End Sub
Then my macro:
UserForm6.Label1.Width = 0
UserForm6.Frame1.Caption = "0%"
DoEvents
If UserForm4.TextBox1.Text = "" Then GoTo 4
OL_TK_Crit = UserForm4.Label24.Caption & " " & UserForm4.Label23.Caption & " " & UserForm4.Label38.Caption & " " & UserForm4.Label3.Caption 'your task subject to be updated
The problem is that while the code is running, my userform refuses to show it's face, and only appears when the macro has finished! I get this quite frequently, and cant fathom the cause
I have a userform with seven textboxes. I want to sum up the values in those textboxes and print the result in a label caption on the form. The label which displays the total needs to be updated every time anyone adjusts the textboxes. Because I need to have it update like this, I need to have a separate (short) procedure that I can call (when a textbox is adjusted) to sum up the textboxes once again, and place that sum in the label caption.
I have encountered a weird problem. When I update the label caption during the USERFORM ACTIVATE procedure, everything works fine and dandy, even though the summing is taking place in a separate procedure. But I cannot realistically run this entire activation procedure every time the user changes the number in a textbox. (Or, I should say, it just seems like sloppy programming to me.) I really need to update the label caption in a separate smaller procedure. However, when I change my code so that the label caption gets updated during the smaller procedure (which performs the summing operation), the caption remains blank.
I am using a version of the Progress bar code shown below which I found on a thread here.
Private Sub UserForm_Activate()
Dim dTime As Date
Dim i, t As Integer
For i = 1 To 100 Step 100 / 8
dTime = Now + TimeValue("0:00:01")
Application.Wait TimeValue(dTime)
ProgressBar1.Value = i
Next i
End Sub
I have the code written so the progress bar shows the progress by taking the total number of loops that need to happen divided by the number of times the loop has taken place. During each loop, the macro copies and pastes data and formats it, then loops again after updating the progress bar. The progress bar works great and shows the progress of the macro if I step through the macro. But if I run the macro at around 25% or 30% the Userform with the progress bar stops updating the bar and the progress seems like its stuck at that percent. The macro still runs fine and finishes without any errors. The macro does not turn off the screen updating. I just can't figure it out.
So this is my first attempt at creating a UserForm progress bar. I currently have the status bar doing basically what I am trying to accomplish but I'm trying to broaden my skills (BTW, I've deleted all company sensitive data but the code should still work for you). I got almost all of this code from microsoft's web page on UserForm Progress Bars and then modified it to work with my existing code. When I execute the code (Click the macro button) the UserForm comes up, but the progress bar is not updating like I was expecting.
View 1 Replies View RelatedI have created a userform with textboxes. I want to update cells on a spreadsheet with the values in the textboxes. I have set the code into a command button to update the values, but they only get updated when I close the userform, not when I click the command button.
View 9 Replies View Related(1)I am using a userform (this contains a listbox) to update cell A1 which in turn updates a cell B1.
(2)I then run the next userform on cell A2 which should update its listbox from column B (which has just been updated previously).
My problem is that following step (1) the spreadsheet gets updated but when I processed to step (2) the listbox within the userform is not updated to show the information now in column B.
Finally, if I run the user form again (same as step (2)) the listbox has been updated .
I have to complete his worksheet but now I am in a memory blank. I have the code set up but I guess I have been staring too much at this code...
I have 2 workbooks... One if for data entry and the other one is for a report.
So workbook1: the user will insert information on sheet1 and click a command button that will transfer the information on the next available row in Workbook2.
Workbook2 is strictly for report purpose. So all information transferred from book1 will be in book2.
I need a way, in book1, to have my userform (already set-up) to search for the matching information in my book2 Column A and update the information from my Book1 sheet2.
I have it set up this way:
VB:
Dim wbArchive As Workbook
Dim wsSrc, wsDst As Worksheet
Dim rngSrc, rngDst As Range
Dim rngReqNo As Range
Dim strReqNo As String
[Code] .....
I need some assistance taking dates entered in a userform and applying them to the sheet 'Completed_Report' cells Q1 and R1. The userform code that stores the input values is:
View 2 Replies View RelatedI feel like I am losing my mind here. I have a basic SUM calculating a bunch of cells. I have done the SUM from th autosum feature as well as, just typing it is (=SUM(B1:b16)), It totals up the cells correctly, but, when I change a value in one of the cells, the sum is not updating? I have never seen this happen...Does anyone know what could be causing this?
View 3 Replies View RelatedIn my Excel 2007 I have downloaded an Add-in (Webiress data) which allows me to receive RTD of a particular security which I then use to plot a chart. In a day there are around 15,000 changes in prices of that particular security.
The problem is that the RTD misses many prices when the market is fast and also it frequently (around 20 times per day) stops updating and then I have to clear the cell where the RTD is updated and it returns to normal, updating the prices for few minutes and then stop again.
A friend of mine told me that I have to change one Registry in Excel to tell Excel to check for a RTD every 2 miliseconds. I found this suggestion a bit strange and I have no idea how to do it.
Has anyone ever come across a RTD issue like this?
I contacted the server provided (webiress) and they said there is no problem with the updating of RTD (real time data) and the problem should be on my side.
Is there a way to insert a cell/row, and add data to one page/tab, and have it automatically insert a cell/row and add the data on another page/tab?
Excel 2003 is the version I am using.
I update graphs/charts everyday. I've been looking at ways of updating a lot of charts in 1 action.....
What would the formula be to have the range of the chart (ie =Data!$BS$1188:$BS$1201) to get the row numbers, not the row, from numbers entered elsewhere on a data sheet (ie =Data!$BS$1188:$BS$1201)
As a lot of the time I use the same number range but on different rows and sheets.
I have created a series of numbers using a column 'n' and 3 cells for Start value, End value and increment, this is thwe formula: .....
View 9 Replies View Relatedif it would be possible to update all the links in a workbook at once. For example, say I have a worksheet which is linking to a file named something like 4-6-08 (1) and 4-6-08 (2) and so on with the number in brackets being from 1-21. Now say I have the same thing for 4-7 and 4-8 and 4-9. Now I want to change the links to point to 4-10,11,12,13 instead of 6,7,8, and 9. But still there are 21 copies of each sheet. Is there any way to change all the sources at once so all the 4-6's could become 4-10's and 4-7's to 4-11's?
View 12 Replies View RelatedI have made a series of of udf's and used them without a problem in my worksheet. One of the variables used by udf's, " commission " is a named range on the "vrs" sheet in my book. All was working fine, all the udfs updated whenever i changed the value of "commission" by directly entering a new value in the cell referenced by "commission" I then wrote sub to call an input box wich collected a value for commission and put it in the ranged cell. Since then, of the 4 columns of data that commission acts on only 3 now update automatically. The recalcitrant 4th column will only update if I select the cell, place the cursor anywhere in the formula and press enter.
View 3 Replies View RelatedI have written some code that populates a list box with data, and have allowed data to be deleted from the list box if a line of data is double-clicked, with the data below the deleted row being updated to remove the empty row, etc. All works fine except that, when I force the list box's 'selected' line to be the one below the last entry (as if you were selecting the next empty line with the mouse) and the code completes, you cannot click on the form and move it around, nor can you access any other of the form's controls, until you click inside the list box.
Apparently, forcing the line selection in the list box (to simulate someone clicking on a row in the list box) is what's causing the problem. I need to force the selection because the number of data lines in the list box is more than can be shown in the list box, therefore I need a method to automatically scroll the list box to show the next available line in the list box.
I have the folowing vba function that i use to check the existance of files but when the workbook is refreshed, the formula doesn't update. It's only updated when i double click it's cell.
View 2 Replies View RelatedI have links in one workbook to a series of other workbooks. Using Excel 2002. I am making selecting changes in the source workbooks and not automatically recalculating the workbook. I know what is changing and am just recalculting that by clicking on the cell and going to the end of the formula and pressing enter.
The problem is that when I go into the master workbook to which this data is linked, it seems unwilling to update the data - and it sounds like this may be because I didn't recalculate the entire workbook.
Is this in fact what happens? Any way around it. Recalculating the workbooks in which the source links are found would take lots of time and I'd rather avoid that.
I need to calculate value in a column (expiration date) based on other two columns (Approval date, Plan Type) for each row in a table.
View 9 Replies View RelatedIs there a way to disable updating to the screen but have a message displayed to the user while a macro is running? Something like a userform displayed on the screen or a message in the status bar. I vaguley remember you could "print" message to the status bar in LotusScript, wondering if there is something similar in Excel.
Application.ScreenUpdating = False
"the macro is running, hang tight"
...macro code in here...
Application.ScreenUpdating = True
I am using Excel 2007.
I have a large spreadsheet and new data is added periodically.
I have several columns of data associated with a description & date.
The data associated with each description is unique to that day.
I want to archive the older desciption data after I add newer description data.
Column B = date of the data
Column E = description (phrase)
How do I remove duplicate older rows of description data from my main spreadsheet (keep the newest descriptions rows) and save the older rows of data in a archive sheet?
My sheet has many columns from A to BU.
I have about 220,000 records with many duplicate Descriptions in column E. Each Description record has a date in the Date column B.
Records are sorted by: Description A to Z
then by: Date Newest to Oldest.
Here is an example (not actual sheet):
I highlighted the duplicate Description records in these examples that I want to update and archive.
I want to delete the older Description records from my main sheet so that only the duplicate Description records with the newest date remains like the example below.
And the older duplicate records that are removed from the main sheet I would like to save to a new sheet so that I can save a history of the Description records.
I have a userform that displays data related to a given stock in textboxes and lets me manipulate other data with command buttons. it works fantastically, except the dynamic data on the sheet does not update dynamically in the textboxes.
i have a combo box from which i select a symbol, data is pulled from the sheet and populates the text boxes. that is accomplished with a sub. there are 800 symbols. i mention that because i can't just set the ControlSource to a specific cell. I tried several different ways of referring to the cell, using .Cells and vlookup but i mostly just got errors. then i tried to do it with code (heh) here's a sample:
SecurityName.Value = Cells(r, 5)
ParityBid1.Value = FormatNumber(Cells(r, 12), 2)
ParityAsk1.Value = FormatNumber(Cells(r, 13), 2)
ParityLast1.Value = FormatNumber(Cells(r, 14), 2)
LocalVolume1.Value = FormatNumber(Cells(r, 10), 0)
Again, it pulls the data fine, it just doesn't update. Anyone who can help will receive total consciousness on their deathbed.
I've been trying for a while now but I can't do it so I was wondering if anyone could do it:
1) I am trying on the "customer detail page", in the " date due" column automatically update with the book/DVD.
The database has been shortened drastically to be able to be able upload
I have hundreds of combobox's that provide a list of names (few thousand names).
I have it set up so a user can select anyone from the combobox for the line of data they are working on.
The problem is, if I add data to the list that is populated by the combo box, the combo box doesn't always update.
the combo box link to the data by named range (list on another sheet in same workbook), and the named range is automatically updated when an entry is added (so the range is correct), but the combo boxes still won't update all the time. The strange part is.
I have several Excel files saved on a network drive at work. We run cost studies and have numerous links mixed in with these files. My question is, when we change data in one sheet, it doesn't update the other sheet where we have it linked. When you click on the address for the link you get, (\fileshareN:Raetc...) If I remove the \fileshare and leave it as N: the links update. What am I doing wrong here? It automatically adds this \fileshare piece when I add the link. When I have removed it and close it, the extra information is added and I am back at square one.
View 2 Replies View RelatedI am using Microsoft Excel 2003. There are several charts in the worksheet and the ranges for the series in the charts are defined by named ranges, e.g.:
Values: =FirstNamedRange
where FirstNamedRange is defined as Sheet1!A2:A100.
The values in FirstNamedRange are themselves calculated from other inputs. The problem is that when I recalculate the sheet, changing the values of FirstNamedRange, there are times when the chart does not change.
This happens sporadically. 9 times out of 10 both the values in the range and the chart change. At other times, the values in the range change and the chart doesn't reflect this. If I save the file, close and then reopen, (thus forcing the chart to recalculate?) then the chart looks correct.
I have a written the function below, but when ever I use it, and for example drag it across lots of cells, they all come up with the same value, and I have to manual click on each one and pres enter to get it to show the right value. I have tried searching but without much luck as I am not sure what I should be searching for. Using application.volatile doesn't.
Option Explicit
Public Function FirstLinePickUp(inputrow As Variant) As Variant
Dim n As Integer
Dim testcell As Variant
n = 0
testcell = ""
Do Until testcell <> "" Or ActiveCell.Column - n <= 0
testcell = Cells(inputrow.row, ActiveCell.Column - n)
n = n + 1
Loop
FirstLinePickUp = testcell
n = 0
testcell = ""
End Function
