Updating Spreadsheet Post Userform
May 22, 2007
(1)I am using a userform (this contains a listbox) to update cell A1 which in turn updates a cell B1.
(2)I then run the next userform on cell A2 which should update its listbox from column B (which has just been updated previously).
My problem is that following step (1) the spreadsheet gets updated but when I processed to step (2) the listbox within the userform is not updated to show the information now in column B.
Finally, if I run the user form again (same as step (2)) the listbox has been updated .
View 9 Replies
ADVERTISEMENT
Nov 18, 2007
I have created a userform with textboxes. I want to update cells on a spreadsheet with the values in the textboxes. I have set the code into a command button to update the values, but they only get updated when I close the userform, not when I click the command button.
View 9 Replies
View Related
Sep 18, 2006
I'm looking at publishing a number of spreadsheets to the Public Folders section on our local Microsoft Exchange Server.
In Excel I can select File > Send To > Exchange Folder...
but I was wondering if there is a way to automate this in a macro?
I would also like to specify a folder it should be posted?
View 6 Replies
View Related
Oct 24, 2013
I am creating a 'add supplier' userform, in which i open the userform, type in the new suppliers information, then press submit.
The problem is that the data i enter deletes the data that i previously entered into row 26 instead of posting the data into a new row (I wish it to be 27, then 28, etc)
Here is my current code for the userform
VB:
Private Sub CommandButton1_Click()
nextrow = 26
Sheets("Suppliers").Cells(nextrow, 3) = UserForm5.TextBox1.Value
Sheets("Suppliers").Cells(nextrow, 5) = UserForm5.TextBox2.Value
Sheets("Suppliers").Cells(nextrow, 6) = UserForm5.TextBox3.Value
Sheets("Suppliers").Cells(nextrow, 7) = UserForm5.TextBox4.Value
[Code]....
View 2 Replies
View Related
May 9, 2014
I have to update a master spreadsheet weekly. I would like to have a button that i can click to update the spreadsheet.
Here is sample data of my spreadsheets
SPREADSHEET 1
col1;col2;col3;col4;col5;col6
abcd;on time;dtjkl;05/06;CM,DR;ghgh
efgh;delay;hjhj;04/12;CD, EF;jgkg
ijkl;on hold;gfhj;02/15;CF,GD;klj
mnop;on time;njhj;04/15;CD,FG;kgkij
SPREADSHEET 2
col1;col2;col3;col4;col5
abcd;on time;05/06;CM,DR;ghgh
efgh;delay;04/12;CD, EF;jgkg
ijkl;on hold;02/15;CF,GD;klj
mnop;on time;04/15;CD,FG;kgkij[table="width: 500"]
I need to update the columns from spreadsheet 1 to spreadsheet 2.
Spreadsheet 2 has less columns. Also the data in col3 for spreadsheet 1 is not there in spreadsheet 2.
The mapping of the columns is as follows:
S1 S2
col1=col1
col2=col2
col3=col4
col4=col5
col5=col6
col6= data already in another column.
View 3 Replies
View Related
Mar 6, 2006
I am trying to update 25 different spreadsheets, and have the latest row of data from each of the 25 automatically go to a 26th spreadsheet that is my summary.
My goal is anytime I add a new row of data in any of the 25, that the summary sheet gets updated automatically.
View 9 Replies
View Related
Jul 19, 2009
I'm on a BTEC in college and my tutor wants me to create 3 spreadsheets, one of them is a Master spreadsheet which shows each pupils grade for each module, their over all end year grade and how many UCAS points that grade will earn them. The other two sheets are for the modules which will have the grades of the pupils in that lesson, Pass, Merit, Destinction or Fail. I hope you're still with me... I've attached an example of one of the 'Slave' spreadsheets as I call them.
My problem is that I can't seem to find a way of doing all this without constant nesting of COUNTIF. The code I have for my 'Unit1' spreadsheet's grade is:
"=IF(COUNTIF(B3:G3,"x")=6,IF(COUNTIF(H3:J3, "x")=3, IF(COUNTIF(K3:M3, "x")=3, "Distinction", "Merit"), "Pass"), "Fail")"
It works, but it's very messy. If this sounds confusing I apologise, the attached documents should clear some of the confusion up. Once the smaller spreadsheets work, the Master needs to use them to update it's cells. If someone has a Merit grade in 'Unit 1', the Master needs to show it too by somehow linking the 'Grade' cell from 'Unit1' to the 'Grade' cell in the Master spreadsheet.
View 3 Replies
View Related
Aug 4, 2014
I am trying to copy a set of data (lets say workbook 1) into a new workbook(workbook 2). Both files are saved in the same directory.
Workbook 1 will be continually updated with new row additions and some changes in text in the rows. I want to copy these new changes (from workbook 1) without having to copy and paste the new additions into workbook 2, as it is wasting a lot of my time.
Is there a trick in excel to automatically do this?
View 2 Replies
View Related
Jan 9, 2014
Any way to automatically update my spreadsheet align all of the cells in the correct row/column.
Attached is a sample sheet. Columns A-D show how they originally look. Columns F-I show how I would like them to appear.
SAMPLE.xlsx‎
View 5 Replies
View Related
Feb 7, 2014
can't get the data to update right. It updates the cells but also overwrites the first person's name.
View 5 Replies
View Related
Aug 3, 2009
I am trying to update a Textbox from two Listbox's and several Textbox's as the user enters values (or double clicks the textbox for a value). (DoubleClick code is completed). I have ten textbox's to enter data into (or double click for prior data stored in the registry). Two Listbox's requiring one selection each. The last textbox (textbox11) produces the text as it is being entered from the previous ten, I currently enter the data in a specific order to build my string, which I want to stick to. If the user has entered the wrong data in any of the active textbox's I would like to be able to update the string shown in textbox11 without losing any data from the string.
Hence where my brain cells are popping. My current code (laughing is a pre-requisite). Is in the next two posts due to character length restrictions (no dis intended). Attached is a screen shot of the userform. In the textbox labeled "FCF" all the data you see that is not in any of the textbox's or listbox's is written in from code.
View 4 Replies
View Related
Sep 3, 2009
I have a UserForm that contains a progress bar. This bar is updated dynamically as the code progresses, but for some reason the lables on the form are not updating themselves. I have tried adding a time delay to see if it is that but to no avail. Code Below.
View 2 Replies
View Related
Sep 1, 2008
I have some code that runs in conjunction with a userform progressbar....
I launch my progress userform like this from a userform commandbutton:
Load UserForm6
UserForm6.Show
(I suspect the load command may not be needed....)
Then when my progress userform launches:
Private Sub UserForm_Initialize()
Call UpdateTasksAll
End Sub
Then my macro:
UserForm6.Label1.Width = 0
UserForm6.Frame1.Caption = "0%"
DoEvents
If UserForm4.TextBox1.Text = "" Then GoTo 4
OL_TK_Crit = UserForm4.Label24.Caption & " " & UserForm4.Label23.Caption & " " & UserForm4.Label38.Caption & " " & UserForm4.Label3.Caption 'your task subject to be updated
The problem is that while the code is running, my userform refuses to show it's face, and only appears when the macro has finished! I get this quite frequently, and cant fathom the cause
View 9 Replies
View Related
Apr 12, 2007
I have a userform with seven textboxes. I want to sum up the values in those textboxes and print the result in a label caption on the form. The label which displays the total needs to be updated every time anyone adjusts the textboxes. Because I need to have it update like this, I need to have a separate (short) procedure that I can call (when a textbox is adjusted) to sum up the textboxes once again, and place that sum in the label caption.
I have encountered a weird problem. When I update the label caption during the USERFORM ACTIVATE procedure, everything works fine and dandy, even though the summing is taking place in a separate procedure. But I cannot realistically run this entire activation procedure every time the user changes the number in a textbox. (Or, I should say, it just seems like sloppy programming to me.) I really need to update the label caption in a separate smaller procedure. However, when I change my code so that the label caption gets updated during the smaller procedure (which performs the summing operation), the caption remains blank.
View 7 Replies
View Related
Nov 29, 2007
I am using a version of the Progress bar code shown below which I found on a thread here.
Private Sub UserForm_Activate()
Dim dTime As Date
Dim i, t As Integer
For i = 1 To 100 Step 100 / 8
dTime = Now + TimeValue("0:00:01")
Application.Wait TimeValue(dTime)
ProgressBar1.Value = i
Next i
End Sub
I have the code written so the progress bar shows the progress by taking the total number of loops that need to happen divided by the number of times the loop has taken place. During each loop, the macro copies and pastes data and formats it, then loops again after updating the progress bar. The progress bar works great and shows the progress of the macro if I step through the macro. But if I run the macro at around 25% or 30% the Userform with the progress bar stops updating the bar and the progress seems like its stuck at that percent. The macro still runs fine and finishes without any errors. The macro does not turn off the screen updating. I just can't figure it out.
View 2 Replies
View Related
Jun 23, 2014
So this is my first attempt at creating a UserForm progress bar. I currently have the status bar doing basically what I am trying to accomplish but I'm trying to broaden my skills (BTW, I've deleted all company sensitive data but the code should still work for you). I got almost all of this code from microsoft's web page on UserForm Progress Bars and then modified it to work with my existing code. When I execute the code (Click the macro button) the UserForm comes up, but the progress bar is not updating like I was expecting.
View 1 Replies
View Related
Jul 25, 2006
how do i show a userform in Excel in the spreadsheet environment? I used to "run macro" but unable to run userform code "private sub".
View 2 Replies
View Related
Mar 6, 2014
I have to complete his worksheet but now I am in a memory blank. I have the code set up but I guess I have been staring too much at this code...
I have 2 workbooks... One if for data entry and the other one is for a report.
So workbook1: the user will insert information on sheet1 and click a command button that will transfer the information on the next available row in Workbook2.
Workbook2 is strictly for report purpose. So all information transferred from book1 will be in book2.
I need a way, in book1, to have my userform (already set-up) to search for the matching information in my book2 Column A and update the information from my Book1 sheet2.
I have it set up this way:
VB:
Dim wbArchive As Workbook
Dim wsSrc, wsDst As Worksheet
Dim rngSrc, rngDst As Range
Dim rngReqNo As Range
Dim strReqNo As String
[Code] .....
View 2 Replies
View Related
May 29, 2009
I need some assistance taking dates entered in a userform and applying them to the sheet 'Completed_Report' cells Q1 and R1. The userform code that stores the input values is:
View 2 Replies
View Related
Mar 26, 2014
I have a couple of columns, once edited need to update a table in SQL. This is my code
[Code] .....
However it is not taking UK date formats, it is assuming it is an american format, I get conversion of varchar data type to datetime results in an out-of-range value. What should I add to change the format? The format is in UK on the spreadsheet seemingly....
View 11 Replies
View Related
Oct 14, 2009
At the moment i've got a userform with 6 text boxes and what I need is when the 'save' button is pressed, all the words from the text boxes is put in 'customers' sheet. I've found this but I just adds data to the top of the current sheet.
View 12 Replies
View Related
Oct 22, 2007
i am trying to use this code to view the workbook (WK) in the userform named WK
it can not reconize .spreadWK
Private Sub UserForm_Initialize()
Me.SpreadWK.Cells.Range("A1:E10").Value = ThisWorkbook.Worksheets("WK").Range("A1:E10").Value
End Sub
however this is saying that it can not reconize
.spreadWK
View 9 Replies
View Related
Jan 5, 2008
I just want to know how do you copy details from a userform (Im doing patient details such as Name, address etc) in the spreadsheet. I have got an OK button I think a VBA code needs to be used that will tell the from to copy the details in an empty row. My user form currently overwrites the original row and is annoying!
View 3 Replies
View Related
Jun 13, 2013
I am working an a userform. I want people to add records to the spreadsheet thru the UserForm ONLY, meaning that if they go straight to the spreadsheet they wont be able to edit anything.
View 1 Replies
View Related
Jun 25, 2014
I have added a user form to this spreadsheet to make it a little more user friendly to edit/add/delete some information. Now the API used only needs longitude/latitude (lat/lon) to be input by the user. In this case it would be good that for each lat/lon to have a custom name added by the user.
How to link the userform, that's already made, to the information in the spreadsheet?
I was thinking it would be convenient to have the "Site Name" added to a column in the sheet named "Site List" and then have the "Fore Cast Data" pull the names from there.
View 13 Replies
View Related
Mar 19, 2014
excel macro through userform for spreadsheet reconciliation.Can we have userform for doing spreadsheet reconciliation(Only by using VLOOKUP). Here are the things i need in userform
1)First box that will ask you Lookup Value (column range)
2)Second Box will ask you Tabel_array say (column range)
3)Third box will ask you Col_index_num (column range)
4)Fourth box will ask for range_lookup (0,1)
5)Fifth box will ask for the column where you need your result in excel
View 13 Replies
View Related
Mar 5, 2007
I've got a 'Control Panel' spreadsheet which is all based on UserForms. When a user clicks a particular button, it opens one of many separate 'Regional' sheets which they work in.
When the user closes the 'Regional' sheet, I would like the 'Control Panel' sheets userforms to show again. However I can find no way of doing this as it simply switches back to the 'Control Panel' sheet without loading the forms (as I had to hide the 'Control Panel' useforms to give them access to the 'Regional' sheet).
View 9 Replies
View Related
May 25, 2009
I have a question related to Userform and/or Message box. In case a macro solve and displays the result as in Userform and Message box then is it possible to write (type) the values to the excel sheet without closing the Userform or Message box ?
View 2 Replies
View Related
Sep 13, 2012
I have the unlock/lock code below but i cannot get it to unlock the correct spreadsheet. Where do i need to place it in the code so that it will work properly.
Code to unlock:
Public Sub unlocksheet()
'unlock the worksheet
On Error Resume Next
ActiveSheet.Unprotect Password:="test"
Within this code:
Private Sub cmdSub_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheets("AFW")
'find first empty row in database
[Code] .........
View 1 Replies
View Related
May 24, 2006
I‘ve made a Userform which should transfer data form the userform to a spreadsheet (see Example). Because the spreadsheet contains a formula in column A the data must be place in column B and further. This part of the code is working. I also want the data to be placed at the first empty row. The following code works when no data or a formula is entered in column A. Because column A contains data up to row number 14 the data will be placed in the first empty row number 15.
Private Sub cmdAdd_Click()
Dim lRow As Long
Dim ws As Worksheet
Set ws = Worksheets("Sheet1")
' Find First empty row
lRow = ws. Cells(Rows.Count, 1) _
.End(xlUp).Offset(1, 0).Row
The code has to be changed so it will find the first empty row. If I use the userform in this example the data must be place in row number 6 in the columns B till L.
View 3 Replies
View Related
