I am trying to use the large function over two ranges. Even though incorrect I will include my original formula that doesn't work to help illustrate.
if(large((L20:L500,W20:W500),1)=I20,$P$4,if((large((L20:L500,W20:W500),2)=I20,$P$5,0)))
Does anybody know of an easy way around this?
I'm trying to use the Large function with multiple cells to get the highest value of the cells. Excel won't let me use the following formula.
=large({a1,f1,j1,o1},1)
Any other ways to get the largest value from multiple cells with or without an array.
I am trying to use the 'large' function to input data from multiple spreadsheets, but am uncertain how to do so other than to use the same rows/columns in each and to use only continuous worksheets (that is, I want to enter data from worksheet 1,3,5 and different columns in each, for example).
View 4 Replies View RelatedI am trying to create an IF function and how to create it for multiple ranges. The for the following criteria is what I am trying to work with: If a checking balance is $500 dollars or below return "low", If it is between 500 and 2000 return "Medium", and IF greater than 2000 return "high"
View 2 Replies View RelatedI would like to utilize the IF function to show the following:
If the date in cell J11 is before April 30, J19 will show J18 * .01, if the date in cell J11 is between May 1 and May 30, J10 will show J18 * .02, and if the date in cell J11 is between June 1 and June 30, J10 will show J18 * .03.
I am trying to call a function that calculates forecast error (wMAPE). This function needs to be able to handle passing in non-contiguous ranges. I can't seem to figure out how to do that.
Function wMAPE(Forecasts As Range, Actuals As Range, Weights As Range) As Variant
Dim Denominator As Double
Dim Numerator As Double
Dim i As Long
Dim Fcst As Variant
Dim Act As Variant
Dim Wt As Variant
If Forecasts.Cells.Count Actuals.Cells.Count Then MsgBox ("Error: Arrays not same size")
If Forecasts.Cells.Count Weights.Cells.Count Then MsgBox ("Error: Arrays not same size")
Denominator = 0............
I've been looking around to find something like this for a while and I'm pretty new to VBA, so I haven't figured it out myself yet.
Basically, I need a macro that can take a 7-column range and replace the values in all cells containing 0 (but not 10, 20, etc) with a blank cell so that a count function in another column can function.
When I just select the range and use 'Find and Replace' to remove the 0s, it alters 10s, 20s, 30s, any number that even ends in zero instead of just the value of zero itself,
While copy/pasting large data ranges in Excel, I get the message "Not Enough Memory". I am clearing the clipboard using the command:
Application.CutCopyMode = False
I am working on a custom log file for my company. It has 3 sheets and on each sheet is a service type column with drop downs and next to it an amount coumn. Every day that a service issue is requested someone goes in and chooses the service type from the drop down and enters the amount in USD. I want to add charts to the top of each sheet and on the axis i want to have service type and then the total amount spent on that catagory.
View 4 Replies View RelatedI'm trying to create a mini-table that will give me the 3 highest and lowest values in a range (I know how to do this using LARGE and SMALL functions), but I also want to get the corresponding name (in column A) for each number. This last part I don't know how to do.
I've attached an example sheet that I hope gives a basic idea of what I'm trying to do. I'm looking for a method to fill in the data for cells A13:A15 and C13:C15 in the attached sheet.
I could modify my worksheet a bit and probably get the result I'm looking for, but I'm hoping to come up with a nicer solution, and hopefully learn Excel a bit better in the process.
I was doing this task using sorting then adding column today morning one of my friend told i can do it with formula only, no need to using sort and adding new column
I just attached the sheet : without sorting.xlsx
Column C contains the names of real-estate brokers.
Column E contains the colors of the homes for sale.
Column Q contains the values of the homes.
I want to return the sum of the 50 most expensive homes that are yellow and for sale by Century 21.
I'm familiar with array formulas, and with the large function. I just do not know how to incorporate the large function within the sum/array formula.
Excel vlookup function returns #VALUE when the lookup value exceeds 256
characters. I need a hash function to transform large strings into a value
that does not exceed the 256 character limit.
I use a large function when ranking numbers in an array each month. I'm only interested in the top 5 numbers. However, there are occasions when the top 5 numbers contain a tie. How do you build into a large function, logic to handle a tie. Here's my function, which is very simple:
Code:
=LARGE(C$6:C$40,1)
=LARGE(C$6:C$40,2)
ETC.
I know how to use the large function when looking for a specific criteria as the example below illustrates:
Code:
=IFERROR(LARGE(IF('2012'!$D$1:$D$7="Green",'2012'!$C$1:$C$7),1),"-")
What I'm trying to do is take this one step further and not only find the nth largest numbers in a set of data based on a particular criteria, but also sum those numbers because they repeat in a table: for example a sample table is below:
Account Accout # Store # channel $ sales
A 1000 10001 green $100
B 1001 10011 green $230
A 1000 10002 green $120
C 1002 10021 brown $145
A 1000 10003 green $100
D 1003 10031 red $20
B 1001 10012 green $50
So what I'm basically attempting to do is bring in the nth largest accounts within the "green" channel. Now if these were the top 5 stores I was looking for, the formula from above would suffice. However since this deals with accounts and the account # repeat I need to bring in the total sum of those repeating accounts instead of just one of the unique stores. So if I was seeking the largest account (NOT store) within the "green" channel the correct values this formula would be:
Account A $320
I would imagine we would need to combine a sumif with a large function or maybe involve sumproduct somehow.
I have a column of number that I want to use the Small & Large function on, skipping duplicates.
Example:
Column A has the following numbers;
1
6
1
4
3
2
4
6
17
8
21
8
10
13
I want the Small function to identify the first lowest number (1) and then the second lowest number (2), not (1) again.
I have a large amount of data, in columnA a list of cars, columnB a list of engines, in columnC the city built, in columnD the country to ship, in columnE distance, in columnF the time.
Now some makes, city's and destinations match and sometimes the engine, but i would like to be able to say cellX = (time to ship) where cellA = Ford AND cellB = 1.8 AND cellC = London and CellD = Ireland
The key data is the city built and shipping destination, so i'd like to say if cell A3 = London AND Cell B3 = Ireland AND Cell A5 = Ford AND CellA7 = 1.8 then CellA10 = (distance) & CellA11 = (time)
Vlookup's are of no use due to the large amount of data. But is there a way of writting this command in VB?? or am i missing something in Excel?
I read the thread Converting from Hexadecimal to Binary and what I need to do is convert the following hex number to binary; 9E6799CF. The function in that thread doesn't seem to handle that large of a hex value. Is there anyway of doing that with a HexToBin function, short of chopping it up converting the smaller numbers and recombining it in binary?
View 2 Replies View RelatedI have been facing few problems while automation my production sheet through formula.
1-- I want to sort data in the descending order through below formula.
=INDEX($A$23:$C$29,MATCH(LARGE($C$23:$C$29,ROW(B3)),$C$23:$C$29,0),MATCH(H$22,$A$22:$C$22,0))
when two candidates have the same percentage then this formula does not work.
I want to create a user input for a "LARGE" function so that I can then return the specified # of "large" items. i.e. user wants to get the top X number of users, user then enters number either into a dialog box or cell, code then looks at the number and populates a range of cells based on the input value. The current code that I am using simply refers to an existing table (r9:r30) that I then used the auto fill to copy to cells below it.
=INDEX(Sheet2!B$20:B$961,MATCH((LARGE(Sheet2!$F$20:$F$961,$R9)),Sheet2!$F$20:$F$961,0))
I really want to be able to just get a user dialog box going that will automatically populate both the range r9:rx (where X is the user input) and then also copy the above formula into the x number of cells below it.
How to get the LARGE function to ignore hidden cells? Is it possible?
I have a filter in a data set and am using a macro to pull in the top 5 largest values.
I have 3 columns of data: col. A = name (random order), col. B = Net #, Col. C = Gross #.
I am using =LARGE(C$1:C$4466,ROWS($D$1:D1) to Automatically sort col C in decending order.
I would Like to do another decending sort but only the values in Col C that corespond to a particular name in Col A. Can I imbed a index match function combination within the large function to do this?
Name
Net
Gross
All Sort
SortA
SortB
SortC
SortD
A
508
-200.129
101.685
[Code] ..........
I need to add something to my macro to delete a sheet if it doesn't have more than 40 rows of data. If it has more than that, it needs to do a whole bunch of stuff to it. I've already got the whole bunch of stuff written, I'm just not sure how to do the if function. I took a stab at it, but it wants the count to be an object. I am not very good at writing code.
Code:
Dim count As Integer
Set count = "COUNT('33M & 33RUL'!A:A)"
If waffle Is "
could provide me a loop function in VBA for these calcultions.
Cell A1*E1 + B1*F1 + C1*G1
Cell A2*E1 + B2*F1 + C2*G1
......till
CellA100*E1 + B100*F1 + C100 * G1
These are the calculations for E1-G1.
The process must be repeated till E50-G50
So the second step is:
Cell A1*E2 + B1*F2 + C1*G2
Cell A2*E2 + B2*F2 + C2*G2
......till
CellA100*E2 + B100*F2 + C100 * G2
I am trying to insert three columns within a large amount of data. I am using Excel 2003 edition. The three columns need to measure max, min, and standard deviation of month long ranges and the data goes all the way back to 1993.
Currently, I have a column that has the correct ranges but finds the average for each month
(=AVERAGE($H7214:$H7243))...
And many more ranges as it dates back all the way to '93. Is there a possible way to insert these three columns with their respective commands (=MAX... =MIN... etc.) while keeping all the ranges from the AVERAGE column.
In effect, I am looking to solely switch the begining of the column command
(=AVERAGE($H7214:$H7243)) to (=MIN($H7214:$H7243) etc...
While keeping all of the specified ranges from the AVERAGE column.
Is there a way to return not only one cell but two with LARGE?
I'm still working on my top 5 sellers list and trying to generate the list correctly. As of now when I have multiples of the same value I get the same name. Here's what I have now:
Name---Sales
Bob---75
Sue---68
Tim---66
Tim---66
Tim---66
What I'm trying to do is this:
Name---Sales
Bob---75
Sue---68
Tim---66
Jane---66
Dave---66
I have a sample of aproxomatly 30,000 records, and I am working to do some data analysis on it.
I am comparing multiple fields using sumproduct(), but if I go above two criteria, the calculation time becomes incredibly long. Is there a faster way to preform these large comparisons, or am I stuck watching my Excel lag out for 5 min every time I recalculate the sheet?
I'm having an issue where I want to merge lots of tables held in different spreadsheets into one large table so that I can use it in a pivot table. The attached spreadsheet demonstrates what I mean:
So there are 3 different accounts held in the first 3 tabs. These all have the same columns and format. I want to merge these automatically into the table that is in tab 4 so that I can use the pivot table also demonstrated in this tab.
What I want to happen is when I add rows to the tables in the first 3 tabs, these are automatically populated onto the 'overall' table in the 4th tab. (I'm aware I could do this manually, but for what I'm using this for these will be dozens of tables with hundreds of rows updated monthly).
Is this possible? Basically it doesn't matter how it's done, as long as i can show the information held in the pivot table each month end.
In column A I have a list of product names..(e.g....ABCD, JKLM....)...this is the "master product list" -- 1000 rows of products.
In columns C:G, I have additional product names, each column represents products sold by state. (each column lists between 100-250 products).
I want to do a VLOOKUP and I wanted to know what products that are in
A1:A1000, that is NOT listed in C:G?
My experience with VLOOKUP is limited...but I do know that I can only look in 1 column at a time.
How can I write it to look at the ENTIRE range? I suppose I can copy all the all the products to 1 column...?
I have a question about sorting. I would like to sort multiple columns from small to large at the same time. Is this possible? I have over 400 columns to sort so I would rather not do this one column at the time.
Example
A.... B.... C
0.2 0.4 0.3
0.4 0.3 0.5
0.1 0.6 0.1
shoud be
A.... B.... C
0.1 0.3 0.1
0.2 0.4 0.3
0.4 0.6 0.5