I am trying to create an IF function and how to create it for multiple ranges. The for the following criteria is what I am trying to work with: If a checking balance is $500 dollars or below return "low", If it is between 500 and 2000 return "Medium", and IF greater than 2000 return "high"
View 2 RepliesI am trying to use the large function over two ranges. Even though incorrect I will include my original formula that doesn't work to help illustrate.
if(large((L20:L500,W20:W500),1)=I20,$P$4,if((large((L20:L500,W20:W500),2)=I20,$P$5,0)))
Does anybody know of an easy way around this?
I would like to utilize the IF function to show the following:
If the date in cell J11 is before April 30, J19 will show J18 * .01, if the date in cell J11 is between May 1 and May 30, J10 will show J18 * .02, and if the date in cell J11 is between June 1 and June 30, J10 will show J18 * .03.
I am trying to call a function that calculates forecast error (wMAPE). This function needs to be able to handle passing in non-contiguous ranges. I can't seem to figure out how to do that.
Function wMAPE(Forecasts As Range, Actuals As Range, Weights As Range) As Variant
Dim Denominator As Double
Dim Numerator As Double
Dim i As Long
Dim Fcst As Variant
Dim Act As Variant
Dim Wt As Variant
If Forecasts.Cells.Count Actuals.Cells.Count Then MsgBox ("Error: Arrays not same size")
If Forecasts.Cells.Count Weights.Cells.Count Then MsgBox ("Error: Arrays not same size")
Denominator = 0............
How can I use a function similar to the "max Function" using more than 30 numbers?
View 9 Replies View RelatedI've got several worksheets that all have the exact same layout that a user will enter unique information in to each worksheet. Then I've got a final worksheet that I want to have a button that the user can click and when they do, it will look to each worksheet and do the exact same process for each worksheet as follows:
It first looks to see if the worksheet is visible. If it is, I want it to copy the range A5 to K5 down until it gets to the last non-blank cell in column C. The first non blank cell that will be referenced will be C7. Then I want it to paste this information into the range A5:K5 on the final sheet named Sheet8 with the same values and keep cell formatting such as width and height, font. If the worksheet is not visible, it skips the sheet.
I want it to do this for each visible worksheet, placing the next visible worksheet info under the previous visible worksheet info. My current code as shown doesn't do that. It requires that something be inSheet8 A6 before it will even paste, then it pastes the info from A5:K5 but it doesn't do just the values nor does it keep the formatting. What I mean about not doing just the values is some of the info that needs to be copied comes from a drop down they can choose from and it copies the actual drop down menu. Also, it seems to copy all of the ranges from each sheet and paste it into just A5:K5 on Sheet8 and overwrites each other instead of pasting Sheet2 just below the information from Sheet1. So the only information shown after the entire process is completed is the information from the last visible sheet.
If Worksheets("Sheet1").Visible = True Then
Sheets("Sheet1").Range(Sheets("Sheet1").Range("A5:K5"),
Sheets("Sheet1").Range("C7").End(xlDown)).Copy
Sheets("Sheet8").Range("A5").End(xlDown)
End If
[Code]...
I have used the Networkday Function to get the Working Days in a month excluding the Saturdays and Sundays and also the Holidays as Networkday Function by default excludes the Sat/Sun and any of Regional Holidays. This works absolutely fine, howevr in the realistic scenarion we need to also add any leaves allotted to an employee.
Now if this List of Holidays is entered in a seperate column, how can this be consolidated to get the actual Working Days = Total Days in a Month - ( Sat/Sun + Regional Holidays) - Leaves ). In the below syntax, the range $I$2:$I$4 contains the Regional Holidays and can be defined as a Name= Holidays
NETWORKDAYS(B2,C2,$I$2:$I$4)
NETWORKDAYS(Startdate,EndDate,Holidays)
Can we incorporate something like a double range like this : Leaves without writing it below the Holiday Range, this new Range by using Offset function can be made into a Dynamic Range. < =NETWORKDAYS(Startdate,EndDate,Holidays & Leaves)>
VBA will not allow the worksheet function MMult to be called during the subroutine. The error that flashes is: "Run-time error 1004. Unable to get the MMult property of the WorksheetFunction property"
Worksheets("MatrixOutput"). Range("ak4:di35").Select
Worksheets("MatrixOutput").Range("c4:ah80").Select
XTranspX = Application.WorksheetFunction.MMult("c4:ah80", "ak4:di35")
Worksheets("MatrixOutput").Range("b84:ag115").FormulaArray = XTranspX
I inherited a spreadsheet that had an userform where the user checked off which 'pages' he wanted to print. The Ok button routine used if statements to run a routine for each 'page.' Here's an example of the original code for one page:
Sub Button2_Click()
Sheet7.Activate
Run "HorizontalPrintStuff" 'generic landscape pagesetup
With ActiveSheet.PageSetup 'specific pageset settings
.RightFooter = " Construction Assumptions"
.PrintArea = "CONSTRUCTION" 'the named range to print
.Zoom = False
.FitToPagesTall = 1
.FitToPagesWide = 1 'this changes depending upon the page selected
End With
ActiveSheet.PrintOut
End Sub
The problem was it printed each page as a separate print job; and if you print to adobe, you get serveral files, not one file. That and it took a long time to run.
So I tried a different tack. If the checkboxes has true, then the printarea is set to that named range. If there were more than one named range on a sheet to be printed, I consolidated them. I did this with a bunch of if statements - very cumbersome.
Sheet3.Activate
'Sheet3.ResetAllPageBreaks 'disabled due to errors
Run "HorizontalPrintStuff" 'generic landscape pagesetup
With ActiveSheet.PageSetup 'specific pageset settings
.PrintArea = "DEVBGTALL" 'the named range to print
.FitToPagesWide = 4 'this changes depending upon the
.FitToPagesTall = 1
End With
I haven't shown all the code cause it goes on for 12 sheets containing 16 different printareas.
My current muck ups are .....
1) it prints every printarea/named range on a given sheet (I took out all the if statements trying to debug everything.) Is there another conditional argument that allows for multiple 'trues'?
2) the pagebreaks in printarea/named ranges that are multiple pages (like a 48 month schedule) won't stay set. I've tried both VPageBreaks(3).Location:= and .VPageBreaks.Add Before:=
3) the Sheet1.select false argument is always adding a random sheet to the end of the print job. Don't know why.
I can do all this in a recorded macro, just not the selection userform. I've thought about copying to another sheet or hiding columns and rows then printing, but that seems just as cumbersome.
To recap, i want to print out, as one print job, multiple printareas from mulitple sheets, based upon checkbox selection on an userform.
I need to be able to track changes on selected ranges on multiple sheets, but Excel does not appear to be able to do this. It only appears to allow me to select multiple ranges on the same sheet.
is there a way to track changes on multiple selected ranges on multiple sheets
In the attached file i have multiple tables for different types of conservatory roofs (16 of them in total). The ranges at the top and side relate to milimeter measurements and the data in the middle relate to the price for that sized conservatory roof. The table works where the two ranges intercept each other. I have a formula to do this for one of the tables only. What i would like is a way of choosing which type of roof to use (i.e. which table to use) and then to be able to input the measurements and the price to be displayed. All of this needs to be done in one query so its as user friendly as possible. i've had is to use a pivot table, i feel it is not possible to use a pivot table to do this sort if thing after research into them, although i am un-familiar in the making of them
View 4 Replies View RelatedI have a table (approx 10 rows x 10 columns) that I am trying to lookup. I have to first look across the top of the table (cols 2-10) to find a name, then look down for a value (exact match) within than array and then find the corresponding value (in that position) in the 1st column. I have used 'name manager' to name these arrays (in columns, rows 2-10).
I have setup the names of the arrays with a drop down list (as per some utube videos). When I try to evaluate the match function (with the array name as a cell reference) i get #value. When I directly type in the name of the array into the match function I get a correct answer.
Should I be using other functions such as indirect, choose, etc instead?
I have named range in column A = holfrom and another in column B = holtill
When I try to use NETWORKDAYS(holfrom;holtill) I get an error VALUE
Is it even possible to use this function with named ranges
I am familiar with the SUMPRODUCT function, but is there a similar function that will divide the cells of two columns and then add them together?
View 3 Replies View Relatedi have a function ("function1") that takes a range as an input:
function1 (a As Range) As Double
i have another function ("function2") that internally creates an array "a" that I need to be the input for function1. I tried, inside function2,:
...
function1(a)
...
but of course (?) it does not work...
This time I have a situation like this:
Column A - Dates
Column B - Equipment Type
Column C - Load Start Time
Column D - Load End Time
I need to do some statistical analysis (average, mode, medium, st dev) on the load times, which is load start time - load end time. As far as I know, I can't subtract ranges (column d i column c) within Averageifs function. I assume I would need to use an array function for this.
I am looking for a macro or function (VBA) that will modifiy the value of the selected cell or cells. the code should support selection of one cell, a range or multiple ranges.
I envision the user making his range selection(s). Activating a function or clicking a button that would pop open a modal window. The user would have the option to either adjust the values by a % change (i.e. up or down 7%), or incremental change (i.e. up olr down 100 units). The function would overite the value in the cells.
Has anyone ever done something similar? Is it hard to program?
I want to pass an array to a function, and am unclear how to do it. For example, the following declaration does not work:
Public Function xyz(a() as Variant) as Double
There is an additional requirement that I would like the output also to be a range of the same dimensions, typically one column and 100 rows. Is this possible?
A further twist is that the function I am writing calculates two values for every element in the input array and I need the output of them both.
An inelegant solution would be to write two separate functions, but I was wondering if it is possible to get two array outputs from a single function.
I am trying to write a User Defined Function in VBA to perform a simple two-dimensional table lookup. I have the temperature distribution in a solid given in a table in Sheet2. The first column of the table contains the time values, the first row contains the spacial values (radii), and the intersections contain temperature values. These ranges are named times, radii, and temperatures. In Excel, I can perform the lookup using: =index(temperatures, match(time, times, 1), match(radius, radii, 1))
But how do you do this in VBA? More specifically, how do you deal with passing ranges to the WorksheetFunctions?
Function temperature_ref(time_range As Range, radii_range As Range, temperatures_range As Range, time As Double, raduis As Double)
r = WorksheetFunction.Match(time, time_range, 1)
c = WorksheetFunction.Match(radius, radii_range, 1)
temperature = WorksheetFunction.Index(temperatures_range, r, c)
End Function
This function would be called (from any worksheet) as..................
Im trying to make a vlookup so I can say find a record where column A is >4, B is =2, C is 1.
Example - The lookup would find these 2 ranges.
7
2
3
2
6
4
[code]....
I am having a hard time getting my match functions to work with letters and numbers in the same range. I am also trying to figure out a way to have the ranges switch if there is an error. because the data is in multiple columns. It is hard to explain so I have attached a sample workbook.
ExampleFile.xlsm
I am trying to do index match function with criteria ranges in another worksheets. The code kept on giving me " #Value!"..
Here is the code:
Sub test1()
Dim myvalue As Variant
Dim wsname As String
Dim i As Integer
Dim j As Integer
Dim r1 As range
Dim r2 As range
Dim r3 As range
Dim r4 As range
wsname = "CustomerIDbyParts"
[Code] .......
The resulting cell of F5 kept on returning #Value!.. I suspect that my syntax for looking up the ranges from another worksheet is wrong?
I have macro that brings information from outlook to excel. In the beginning of macro, it deletes range of cells. That destroys the functions that target those cells. Is there a way avoid that? Using some different method or ?
Code:
Dim olApp As Outlook.Application
Dim olNS As Outlook.Namespace
Dim myCalItems As Outlook.Items
Dim ItemstoCheck As Outlook.Items
[Code] ........
Running the macro messes up all funtions that targets those cells.
Like:
Code:
=DATEVALUE(MID(data!#REF!;4;2)&"."&LEFT(data!#REF!;2)&"."&RIGHT(data!#REF!;2))
This really great code to get data from outlook is originally: [URL] ........
I am getting a #REF error when using an INDIRECT function within a MATCH function to check against a dynamic named range. Basically, I am trying to get the row reference so that I can go back and extract other data from the row (in a table contained in another sheet) into the current worksheet.
I attach an example file for reference. The issue arises when a Dynamic Named Range is used. In the example file, if a value from a static range is chosen, the match with indirect function works, but it fails with the dynamic range.
Dynamic Ranges INDIRECT v2.xlsb
I have set following ranges:
[Code] ....
I use above rngData1 as follows:
[Code] ....
How can I use all above ranges in For Each statement?
For example For Each rngRow In .Range(rngData1+rngData2+rngData3+rngData4).Rows
look at the formulas in column cells G28..G33 and tell me where I went wrong.I have attached the file.
View 2 Replies View RelatedI am trying to combine three IF formulas that depend on ranges that vary. I think the attached sheet does a much better job of explaining what I am looking for than I can do.
View 3 Replies View RelatedI have a list of grade from 2~4 (i have long list but for sample i made it short). I want to get average of all grades one by one as well as by making some groups. Like 2,3, "2~4" (all groups) then "3~4". All the things were going nicely with a drop down menu. But when i put average on grde "3~4" only then the problem occurred. Although I've done my work but still I think there must be some improvements.....
View 6 Replies View RelatedQuick question: When using "With" is it possible to specify 2 ranges, or will I need to do 2 different with blocks? The reason I say not using Union is because I need my ranges seperate. I run 1 set of commands on Range 1, and 1 set of commands on both Range 1 and 2.
View 3 Replies View RelatedI am trying to use an ActiveX CommandButton on Sheet40 to do the following:
Sheet40 (E31:AN39) = sum of (E31:AN39) for sheets 6-15 PROVIDED that cell D3= "y" in those sheets
So the steps are:
(1) Among sheets 6-15 select those in which cell D3 = "y"
(2) Set the range of (E31:AN39) in sheet40 to the sum of the same range in the selected sheets
ie cell E31 = sum of cells E31 in selected sheets... cell E32 same... cell AN39 same