I understand the following code finds and selects the last empty cell in column A
Range("A65536").End(xlUp).Offset(1, 0).Select
I am looking for a way to find last empty cell withing a specifice range of cells in column A. Example, I want to loop through from A6 to A16, find the last empty cell and fill it up.
I have multiple tables like the one in the picture and have to duplicate this code for different known ranges.
View 11 Replies View RelatedI'm looking for a formula to do the following:
I'm building a table (see attached) where I could have a value in cells D6 to P6 that ranges from 0 upwards. In the respective cell beneath each 'value' cell (D7 to P7) I need a formula that will return a figure of 10 if the value in the cell above is 0.4 or below reducing to 0 if the value in the cell above is 1.0 or above.
I have a spreadsheet wherein if I press ctrl-A (normally Select All) it is only selecting a limited range of cells ($B$12:$M$22). If I press ctrl-A again from there then it selects all.
I can see something like that being useful in some cases and annoying in others, but I have no idea what is causing it. Some of the cells in that range are locked and others are not. Some of the cells outside that range are also locked while others are not. In any case, the sheet is not protected.
in my worksheet i want to show only column from A to BA and rows only 1 to 5000
View 2 Replies View RelatedI have checked archives, some similiar but not quite what I want.
In code below I want the output instead of going offset one column to right in same row to go one column to right into the next blank cell.
I am looking too limit a cell too only contain 5 or 7 characters.
I can limit too one length, i.e. just 7, using the data validation function.
I'm not sure how this could be done though i'm pretty sure its going to require some VBA instead of conditional formatting. I would like cell B2 to have background colour red for 10 seconds after cell A1 is edited. So every time A1 is edited B2 will change colour for 10 seconds and then back to original formating.
View 4 Replies View RelatedHow do I make this to work with dynamic range instead running for complete column? For example: Run this code until last active cell in Column A. Column A will always has value so if cell A25 is last active cell in range then this code should stop executing for column R25. So execution of this code would depend on active cell in column A.
Columns("R:R").Select
Dim Cell As Range
For Each Cell In Selection.Cells
If Cell.Value = True Then ' if true do nothing
Cell.Value = ""
ElseIf Cell.Value = False Then ' if false change to Null
Cell.Value = "Null"
End If
Next
Here is what I am trying to do in lay terms:
If A2 and B2 on Sheet("Master") are not highlighted, copy and paste them into Cell A3 and B3 on Sheet("Job List - Numeric"). Do this up to Row 50 on Sheet("Job List - Numeric"). Once Row 50 is filled, jump to pasting to D3 and E3 on Sheet("Job List - Numeric") and continue up to Row 50 and so on....
I need to do this on one sheet in numerical order based upon Column A and another sheet in alphabetical order based upon Column B.
Here is what I have in code so far:
Sub Final()
Application.ScreenUpdating = False
Dim c As Integer
Dim x As Integer
For Row = 2 To 145
Range(ActiveCell, Cells(ActiveCell.Row, ActiveCell.Column + 1)).Select
[Code] .......
I am looking for a Macro that will search a column for blank cells, and when one is found will add text to the same row in another column. For example: The below is a spreadsheet. I am trying to find something that will search through column "C" in this case and add text (of my choice) to Column "A" if the cell is Blank. So Since cell C1 is Blank then Type "ERROR" is cell A1.
A B C D E
1 X X X X
2 X X X X
3 X X X X X
4 X X X X
5 X X X X
A
B
1
Name
Action
2
Joe
Created
3
Bob
Approved
4
Cindy
5
Jane
6
Dave
7
I need a macro that will work through a range, find the first non-blank cell, put that cell's info in another cell, then continue from where it left off and find/record the next non-blank cell. And the next, and the next, until the range is completed. If A1 had "1" and A5 had "2" and A10 had "3" then record those ,say in C1:C3 "1", "2", and "3".
I can find the first cell, but can't continue where I left off to get the next.
trying to find the first blank cell in column H. However this gives me 1048576 - i.e the number of rows in Excel 2007. I have checked and all the rows below row 33 are blank.
No_of_Rows = Sheets("Sheet2").Range("H2").End(xlDown).Row
the data is an extract from sage accounts.
i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows
View 3 Replies View RelatedI need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
I want to get the text inside the cell which is to the left of the first blank cell of a column.
I show the problema in the attach imageSin tÃtulo.jpg
I have a data in a column B, from B17 to B1000. the data looks like:
0.1
0.5
20
15
16
20
10
I want to get the last non-blank cell (in the previous example = 10), and the one before it (20), and the one before it (16).I mean I want the last three non-blank cells. I used =INDEX(B17:B1017,MATCH(9.99999999999999E+307,B17:B1017)) to bring the last non-blank cell. I'm using excel 2003, but it's OK to use Excel 2007 if it will solve the problem.
I have a range name called 'Dates' that I need to copy to another column, however in the range name not all cells are populated (however there is a formula that specifies if a cell is blank).
I am trying to record a macro that will take me to the next blank cell in the column I am copying to, but when I go to a cell at the bottom of the column then press 'End' and the up arrow I am taken to the cell that is the equivalent of the bottom of the range 'Dates', even though this is not the next blank cell.
How can I get it to go to the next blank cell in this case?
I have a worksheet with active range A9 thru K200 that is locked. When worksheet is opened, I need it to automatically unlock all rows that are blank, for users to input data. It would be great if this could also require data in column A, C and K before allowing workbook to be saved and closed.
View 2 Replies View RelatedI had a macro to do this but forgot to save before close now i can't find it.
I need to find the next blank cell in range F15:F240 and select it so i can paste data there.
I want to copy a changing value from a cell (A3) to the next blank cell in the column creating a list of numbers for a total.
View 3 Replies View RelatedI need some VBA code that will allow me to copy the prior columns cell value into the current row if the cell is blank. More specifically if there is a blank cell in column D, then copy the adjacent value in column C to the cell. Hope this makes sence. I've attached a sample spreadsheet that shows my desired output.
View 3 Replies View RelatedI want to populate a row with text "OFF" if a cell in column A is blank, I need the text to be from column F to Column S, I have a bit of code that finds the blank cell in column A and populates the cell in column F, modifying it to extent to column S.
View 2 Replies View RelatedI will be moving to a specific cell - "N1". I'm looking for code that will then scan down from that cell, making the first blank cell the active one.
View 4 Replies View RelatedHere's what I tried using macro recorder...
View 4 Replies View RelatedI want to select the first blank cell in the first blank column. I would just look at the column and instruct it to select a given range, but each month the blank column will change (by moving one to the right).
So for example
This Month:
Columns A-Q all have data in it. So, I would need to select cell "R1"
Next Month:
Columns A-R will all have data in it. So, I would then need to select cell "S1" Need code to auto-detect the blank column and then select that column's first cell?
How would I do a vba for finding a blank cell in column D, and when a blank cell is found, delete and shift up cells D through N on the same line?
View 2 Replies View RelatedI am have data in as shown below where there a number and few blank cell. I would to write a macro that loops through the column and merge blank cell with cell nonblank cell above.
20085
blank
blank
20086
blank
blank
blank
blank
blank
20087
blank
20088
blank
blank
20089
i need the vba code to
paste into last blank cell of column A